Citations (40)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Bharani Chandar Jayaprakash, N. Lenin & M. Siva Kumar. (2023) Experimentation and optimization of deep hole drilling parameters for SS316L. Materials and Manufacturing Processes 38:6, pages 770-781.
Read now
Read now
Cong Ni & Yan Shi. (2023) Abrasive flow finishing of micro-channel produced by selective laser melting. Materials and Manufacturing Processes 38:5, pages 529-543.
Read now
Read now
Palwinder Singh, Lakhvir Singh & Sehijpal Singh. (2022) A box behnken design approach for parametric optimization in processing of aluminum 6061 tubes. Materials and Manufacturing Processes 37:10, pages 1110-1121.
Read now
Read now
Chinu Kumari & Sanjay Kumar Chak. (2021) Experimental studies on material removal behavior in MRAH based finishing technique. Materials and Manufacturing Processes 36:8, pages 916-925.
Read now
Read now
Jai Kishan Sambharia, Harlal Singh Mali & Vishal Garg. (2018) Experimental investigation on unidirectional abrasive flow machining of trim die workpiece. Materials and Manufacturing Processes 33:6, pages 651-660.
Read now
Read now
R. Selvam, L. Karunamoorthy & N. Arunkumar. (2017) Investigation on performance of abrasive water jet in machining hybrid composites. Materials and Manufacturing Processes 32:6, pages 700-706.
Read now
Read now
M. Naresh Babu & N. Muthukrishnan. (2014) Investigation on Surface Roughness in Abrasive Water-Jet Machining by the Response Surface Method. Materials and Manufacturing Processes 29:11-12, pages 1422-1428.
Read now
Read now
A.
Cheng Wang, Ken
Chuan Cheng, Kuan
Yu Chen & Yan-Cherng Lin. (2014) Enhancing the Surface Precision for the Helical Passageways in Abrasive Flow Machining. Materials and Manufacturing Processes 29:2, pages 153-159.
Read now
Read now
Izzet Karakurt, Gokhan Aydin & Kerim Aydiner. (2012) An Experimental Study on the Depth of Cut of Granite in Abrasive Waterjet Cutting. Materials and Manufacturing Processes 27:5, pages 538-544.
Read now
Read now
Tarun Goyal, R.S. Walia & T.S. Sidhu. (2012) Effect of Parameters on Coating Density for Cold Spray Process. Materials and Manufacturing Processes 27:2, pages 193-200.
Read now
Read now
Tarun Goyal, Ravinderjit
Singh Walia & T.S. Sidhu. (2012) Study of Coating Thickness of Cold Spray Process Using Taguchi Method. Materials and Manufacturing Processes 27:2, pages 185-192.
Read now
Read now
Tsuo-Fei Mao, Shie-Chen Yang, Feng-Che Tsai, Jung-Chou Hung & Biing-Hwa Yan. (2010) Experimental Investigation of Abrasive Jet Polishing on the Free-Form Machined Surfaces of SKD61 Mold Steel Using SiC Particles. Materials and Manufacturing Processes 25:9, pages 965-973.
Read now
Read now
Articles from other publishers (28)
Baocai Zhang, Sufang Shi, Xiayu Wang & Xinchang Wang. (2023) Machinability and mechanism of abrasive flow machining ultra-precision surface with orientated grinding marks. Journal of Materials Research and Technology 27, pages 4787-4800.
Crossref
Crossref
Baocai Zhang, Xinchang Wang, Shifei Chen & Sufang Shi. (2023) Theoretical and numerical analysis on finishing mechanism by rheological properties and flow behaviors of abrasive media in micro-porous structures. Journal of Manufacturing Processes 99, pages 513-526.
Crossref
Crossref
Gagandeep Chawla & Vinod Kumar Mittal. (2023) Experimental investigation and optimization of process parameters of hybrid Al/SiC/B4C–MMCs finished by MAFM process using RSM modeling with supervised machine learning algorithm. Sādhanā 48:2.
Crossref
Crossref
P. Kondala Rao & G. Ranga Janardhana. (2023) Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process. E3S Web of Conferences 391, pages 01024.
Crossref
Crossref
Palwinder Singh, Lakhvir Singh & Sehijpal Singh. 2023. Recent Developments in Mechanics and Design. Recent Developments in Mechanics and Design
9
23
.
Shubham Choudhary, Ravinder Kumar Duvedi & Jaswinder Singh Saini. (2022) Investigation on fluid jet polishing of AISI H13 die steel using a single nozzle tool. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211454.
Crossref
Crossref
Wenhua Wang, Wei Yuan, Jie Yu, Qianjian Guo, Shutong Chen, Xianhai Yang & Jianchen Cong. (2022) Prediction of Surface Roughness in Gas-Solid Two-Phase Abrasive Flow Machining Based on Multivariate Linear Equation. Micromachines 13:10, pages 1649.
Crossref
Crossref
Baocai Zhang, Shifei Chen & Xinchang Wang. (2022) Machining uniformity and property change of abrasive media for micro-porous structures. Journal of Materials Processing Technology 307, pages 117675.
Crossref
Crossref
Bao-Cai Zhang, Shi-Fei Chen, Nasim Khiabani, Yu Qiao & Xin-Chang Wang. (2022) Research on the underlying mechanism behind abrasive flow machining on micro-slit structures and simulation of viscoelastic media. Advances in Manufacturing 10:3, pages 382-396.
Crossref
Crossref
Baocai Zhang, Yu Qiao, Nasim Khiabani & Xinchang Wang. (2022) Study on rheological behaviors of media and material removal mechanism for abrasive flow machining (AFM) micro structures and corresponding simulations. Journal of Manufacturing Processes 73, pages 248-259.
Crossref
Crossref
Palwinder Singh, Lakhvir Singh & Sehijpal Singh. 2022. Machines, Mechanism and Robotics. Machines, Mechanism and Robotics
225
238
.
Nitin Dixit, Varun Sharma & Pradeep Kumar. (2021) Research trends in abrasive flow machining: A systematic review. Journal of Manufacturing Processes 64, pages 1434-1461.
Crossref
Crossref
S.M. Basha, M.M. Basha, N. Venkaiah & M.R. Sankar. (2021) A review on abrasive flow finishing of metal matrix composites. Materials Today: Proceedings 44, pages 579-586.
Crossref
Crossref
Ankit Soni, Jai Kishan Sambharia & Sandesh Trivedi. 2021. Advances in Manufacturing Systems. Advances in Manufacturing Systems
139
156
.
Kürşad GÖV, Osman SOYDAN & Ömer EYERCİOĞLU. (2020) Aşındırıcı macun ile elektro erozyonla işlenmiş Ti-6Al-4V alaşımının yüzey kalitesinin iyileştirilmesi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 35:3, pages 1159-1170.
Crossref
Crossref
Youzhi Fu, Hang Gao, Qiusheng Yan, Xuanping Wang & Xu Wang. (2020) Rheological characterisation of abrasive media and finishing behaviours in abrasive flow machining. The International Journal of Advanced Manufacturing Technology 107:7-8, pages 3569-3580.
Crossref
Crossref
D. Sudhakara, S. Suresh & B. Vinod. (2020) Experimental Study on Abrasive Flow Machining (AFM): New Approach for Investigation on Nano-SiC in the Improvement of Material Removal and Surface Finishing. Journal of Bio- and Tribo-Corrosion 6:1.
Crossref
Crossref
Youzhi Fu, Hang Gao, Qiusheng Yan & Xuanping Wang. (2019) A new predictive method of the finished surface profile in abrasive flow machining process. Precision Engineering 60, pages 497-505.
Crossref
Crossref
Hui Ji, Xiurong Cao, Songlin Nie & Fanglong Yin. (2019) Simulation and experiment study of the self-excited oscillating mixer with abrasive jet used for the descaling of rusty steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233:5, pages 1109-1127.
Crossref
Crossref
Haibo Wei, Can Peng, Hang Gao, Xuanping Wang & Xuyue Wang. (2019) On establishment and validation of a new predictive model for material removal in abrasive flow machining. International Journal of Machine Tools and Manufacture 138, pages 66-79.
Crossref
Crossref
Junye Li, Wenqing Meng, Kun Dong, Xinming Zhang & Weihong Zhao. (2018) Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics. Nanoscale Research Letters 13:1.
Crossref
Crossref
Kai Liang Tan, Swee-Hock Yeo & Chin Hwee Ong. (2016) Nontraditional finishing processes for internal surfaces and passages: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:13, pages 2302-2316.
Crossref
Crossref
Mithun Sarkar & VK Jain. (2015) Nanofinishing of freeform surfaces using abrasive flow finishing process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:9, pages 1501-1515.
Crossref
Crossref
Fengyu Sun, Lili Wei, Junye Li, Xinming Zhang & Ying Xu. (2017) The single factor experiment of the non-linear tube in abrasive flow machining. Journal of Measurements in Engineering 5:1, pages 11-18.
Crossref
Crossref
Naresh Babu Munuswamy & M. Nambi Krishnan. (2014) Multiresponse Analysis in Abrasive Waterjet Machining Process on AA 6351. International Journal of Manufacturing, Materials, and Mechanical Engineering 4:4, pages 38-48.
Crossref
Crossref
Sarbjit Singh, Inderdeep Singh & Akshay Dvivedi. (2014) Design and development of abrasive-assisted drilling process for improvement in surface finish during drilling of metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:8, pages 858-867.
Crossref
Crossref
Junye Li, Lifeng Yang, Weina Liu, Xuechen Zhang & Fengyu Sun. (2015) Experimental Research into Technology of Abrasive Flow Machining Nonlinear Tube Runner. Advances in Mechanical Engineering 6, pages 752353.
Crossref
Crossref
Yilmaz Ozcelik, Raimondo Ciccu & Augusto Bortolussi. (2013) Effect of Working Parameters on Excavation Rate and Specific Energy on Surface Treatment With Pure Water Jet. Journal of Testing and Evaluation 41:1, pages 104617.
Crossref
Crossref