Citations (89)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (22)
Karthick Rasu & Anbumalar Veerabathiran. (2022) A Review on Drilling of Natural and Synthetic Fiber Reinforced Polymer Composites: 1992 - 2021. Journal of Natural Fibers 19:16, pages 15100-15115.
Read now
Read now
N.S. Manjunatha Babu & Rajesh Mathivanan N. (2022) Statistical analysis of drilled hole parameters during machining of carbon/glass FRP laminates. Advances in Materials and Processing Technologies 8:2, pages 1408-1431.
Read now
Read now
Dhruv Rathod, Mihir Rathod, Ronak Patel, S.M. Shahabaz, S. Divakara Shetty & Nagaraja Shetty. (2021) A review on strengthening, delamination formation and suppression techniques during drilling of CFRP composites. Cogent Engineering 8:1.
Read now
Read now
K. Venkatesan, S. Devendiran, Sai Chandra Sekhara Raju Bhupatiraju, Sathwik Kolluru & Chirla Pavan Kumar. (2020) Experimental investigation and optimization of micro-drilling parameters on Inconel 800 superalloy. Materials and Manufacturing Processes 35:11, pages 1214-1227.
Read now
Read now
Jinyang Xu, Lei Zhou, Ming Chen & Fei Ren. (2019) Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. Materials and Manufacturing Processes 34:7, pages 715-725.
Read now
Read now
Massimo Durante, Luca Boccarusso, Dario De Fazio & Antonio Langella. (2019) Circular cutting strategy for drilling of carbon fiber-reinforced plastics (CFRPs). Materials and Manufacturing Processes 34:5, pages 554-566.
Read now
Read now
T. Rajmohan. (2019) Experimental investigation and optimization of machining parameters in drilling of fly ash-filled carbon fiber reinforced composites. Particulate Science and Technology 37:1, pages 21-30.
Read now
Read now
Kundan Patel, Piyush P. Gohil & Vijaykumar Chaudhary. (2018) Investigations on drilling of hemp/glass hybrid composites. Materials and Manufacturing Processes 33:15, pages 1714-1725.
Read now
Read now
G. Anand, N. Alagumurthi, K. Palanikumar, N. Venkateshwaran & R. Elansezhain. (2018) Influence of drilling process parameters on hybrid vinyl ester composite. Materials and Manufacturing Processes 33:12, pages 1299-1305.
Read now
Read now
Karanbir Singh, Tarun Nanda & Rajeev Mehta. (2018) Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites. Materials and Manufacturing Processes 33:2, pages 165-173.
Read now
Read now
Shivdayal Rao, Abhijeet Sethi, Alok Kumar Das, Niladri Mandal, P. Kiran, Rizul Ghosh, A. R. Dixit & A. Mandal. (2017) Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Materials and Manufacturing Processes 32:14, pages 1612-1621.
Read now
Read now
M. Mudhukrishnan, P. Hariharan, K. Palanikumar & B. Latha. (2017) Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites. Materials and Manufacturing Processes 32:9, pages 988-997.
Read now
Read now
S. Sahoo, A. Thakur & S. Gangopadhyay. (2016) Application of Analytical Simulation on Various Characteristics of Hole Quality during Micro-Drilling of Printed Circuit Board. Materials and Manufacturing Processes 31:14, pages 1927-1934.
Read now
Read now
D. Samuel Raj & L. Karunamoorthy. (2016) Study of the Effect of Tool Wear on Hole Quality in Drilling CFRP to Select a Suitable Drill for Multi-Criteria Hole Quality. Materials and Manufacturing Processes 31:5, pages 587-592.
Read now
Read now
K. Palanikumar, T. Srinivasan, K. Rajagopal & B. Latha. (2016) Thrust Force Analysis in Drilling Glass Fiber Reinforced/Polypropylene (GFR/PP) Composites. Materials and Manufacturing Processes 31:5, pages 581-586.
Read now
Read now
Yousef Erfanifard, Negin Behnia & Vahid Moosavi. (2014) Tree crown delineation on UltraCam-D aerial imagery with SVM classification technique optimised by Taguchi method in Zagros woodlands. International Journal of Image and Data Fusion 5:4, pages 300-314.
Read now
Read now
RavinderS. Joshi, Harpreet Singh & Inderdeep Singh. (2014) Modulation-Assisted Drilling of Glass-Fiber-Reinforced Plastics. Materials and Manufacturing Processes 29:3, pages 370-378.
Read now
Read now
A.I. Azmi, R.J. T. Lin & D. Bhattacharyya. (2012) Experimental Study of Machinability of GFRP Composites by End Milling. Materials and Manufacturing Processes 27:10, pages 1045-1050.
Read now
Read now
Wang Ben, Gao Hang, Wen Quan, Wu Maoqing & Zhang Songpeng. (2012) Influence of Cutting Heat on Quality of Drilling of Carbon/Epoxy Composites. Materials and Manufacturing Processes 27:9, pages 968-972.
Read now
Read now
S. Kumar, S.R. Chauhan, P.K. Rakesh, I. Singh & J.P. Davim. (2012) Drilling of Glass Fiber/Vinyl Ester Composites with Fillers. Materials and Manufacturing Processes 27:3, pages 314-319.
Read now
Read now
K. Palanikumar, B. Latha, V.S. Senthilkumar & J.
Paulo Davim. (2012) Analysis on Drilling of Glass Fiber–Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis. Materials and Manufacturing Processes 27:3, pages 297-305.
Read now
Read now
M.D. Antony Arul Prakash, V.L. Jagannatha Guptha, RameshS. Sharma & B. Mohan. (2012) Influence of Cell Size on the Core Shear Properties of FRP Honeycomb Sandwich Panels. Materials and Manufacturing Processes 27:2, pages 169-176.
Read now
Read now
Articles from other publishers (67)
I. Infanta Mary Priya, K. Palanikumar, N. Senthilkumar & P. Siva Prabha. (2023) Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Kaan Emre Engin, Ali Ihsan Kaya & Mahmut Tandogan. (2023) The effect of piercing and drilling processes on burr formation and delamination of aged carbon and aramid fiber-reinforced polymer composites. Transactions of the Canadian Society for Mechanical Engineering 47:2, pages 259-269.
Crossref
Crossref
Silvia Slabejová, Michal Šajgalík, Pavol Timko, Peter Kozový, Martin Novák & Miroslav Cedzo. (2023) Analysis of Cutting Forces during Machining with Additive-Produced Milling Head. Manufacturing Technology 23:2, pages 254-259.
Crossref
Crossref
Feng Jiao, Yuanxiao Li, Ying Niu, Ziqiang Zhang & Wenbo Bie. (2023) A review on the drilling of CFRP/Ti stacks: Machining characteristics, damage mechanisms and suppression strategies at stack interface. Composite Structures 305, pages 116489.
Crossref
Crossref
lvtao Zhu, Fujun xu & wei Shen. (2022) Numerical analyses of axial tension mechanisms of 3D orthogonal woven E-glass/epoxy composites with drilled holes. Textile Research Journal 92:19-20, pages 3478-3487.
Crossref
Crossref
Rampal, Gaurav Kumar, Sanjay Mavinkere Rangappa, Suchart Siengchin & Sunny Zafar. (2022) A review of recent advancements in drilling of fiber-reinforced polymer composites. Composites Part C: Open Access 9, pages 100312.
Crossref
Crossref
Mehmet Akif Doğan, Şakir Yazman, Lokman Gemi, Murat Yildiz & Ahmet Yapici. (2022) A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions. Composite Structures 297, pages 115913.
Crossref
Crossref
Jinyang Xu, Youkang Yin, J. Paulo Davim, Linfeng Li, Min Ji, Norbert Geier & Ming Chen. (2022) A critical review addressing drilling-induced damage of CFRP composites. Composite Structures 294, pages 115594.
Crossref
Crossref
Chang-Min Joo, Jong-Hyun Baek, Su-Jin Kim & Gun-Myung Lee. (2022) Acoustic Emission and Burr Comparison of Circular Sawing and Milling in Fiber Reinforced Plastic Cutting. Journal of the Korean Society of Manufacturing Process Engineers 21:7, pages 98-104.
Crossref
Crossref
V. Sivaprasath & N. Senthilkumar. (2022) Maximizing MRR during drilling PLA + CF biocomposite with spade drill and comparing the results with twist drill using statistical approach. Materials Today: Proceedings 69, pages 1242-1246.
Crossref
Crossref
B. Ramesh, S. Sathish Kumar, Ammar H. Elsheikh, S. Mayakannan, K. Sivakumar & S. Duraithilagar. (2022) Optimization and experimental analysis of drilling process parameters in radial drilling machine for glass fiber/nano granite particle reinforced epoxy composites. Materials Today: Proceedings 62, pages 835-840.
Crossref
Crossref
Hong Xiao, Chenping Zhang, Yugang Duan, Yueke Ming & Hongxiao Wang. (2021) Improving the delamination resistance of CFRP by establishing and analyzing the micro-mechanical model. The International Journal of Advanced Manufacturing Technology 117:1-2, pages 217-226.
Crossref
Crossref
Jong-Hyun Baek, Chang-Min Joo, Su-Jin Kim & Yoon-Ok Park. (2021) Effect of the Circular Saw-Blade Type and Wear on the Cutting Quality of a Glass–Carbon-Fiber Hybrid Composite. Journal of the Korean Society of Manufacturing Process Engineers 20:10, pages 72-79.
Crossref
Crossref
Khaled Giasin, Antigoni Barouni, Hom Nath Dhakal, Carol Featherson, Zitoune Redouane, Sezer Morkavuk & Ugur Koklu. (2020) Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions. Journal of Reinforced Plastics and Composites 40:7-8, pages 273-293.
Crossref
Crossref
K. Venkatesan, Kandru Udaya Nagendra, Chilukuri Meher Anudeep & Ajay Earnest Cotton. (2020) Experimental Investigation and Parametric Optimization on Hole Quality Assessment During Micro-drilling of Inconel 625 Superalloy. Arabian Journal for Science and Engineering 46:3, pages 2283-2309.
Crossref
Crossref
Sam VimalSinghSingh, Achyuth Ramachandran, Anirudh Selvam & Karthick Subramanian. (2021) Python inspired artificial neural networks modeling in drilling of glass-hemp-flax fiber composites. FME Transactions 49:2, pages 422-429.
Crossref
Crossref
Vimal Samsingh, Achyuth Ramachandran, Anirudh Selvam & Karthick Subramanian. (2021) Python implementation of fuzzy logic for artificial intelligence modelling and analysis of important parameters in drilling of hybrid fiber composite (HFC). IOP Conference Series: Materials Science and Engineering 1012:1, pages 012037.
Crossref
Crossref
Rifky Yusron, AM. Mufarrih, Saiful Arif, Nanang Qosim & Zakki Emzain. (2021) Analysis of Wettability and Surface-Roughness of Titanium Grade 2 in Milling Process. E3S Web of Conferences 328, pages 07012.
Crossref
Crossref
Norbert Geier, Jinyang Xu, Csongor Pereszlai, Dániel István Poór & J. Paulo Davim. (2021) Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations. Procedia Manufacturing 54, pages 284-289.
Crossref
Crossref
Bijaya Bijeta Nayak, Souranil Kundu, Mritunjay Kumar, Vivek Kumar, Rishabh Kumar & Kumar Poornendu Shivam. (2021) Parametric optimization in drilling of GFRP composites using desirability function integrated simulated annealing approach. Materials Today: Proceedings 44, pages 1983-1987.
Crossref
Crossref
Halil Burak Kaybal, Ali Unuvar, Yusuf Kaynak & Ahmet Avcı. (2019) Evaluation of boron nitride nanoparticles on delamination in drilling carbon fiber epoxy nanocomposite materials. Journal of Composite Materials 54:2, pages 215-227.
Crossref
Crossref
M. Mudhukrishnan, P. Hariharan & K. Palanikumar. (2020) Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills. Measurement 149, pages 106973.
Crossref
Crossref
Ritesh Bhat, Nanjangud Mohan, Sathyashankara Sharma, Achutha U. Kini, Shivamurthy Shivakumar & Nithesh Naik. (2020) Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach. Materials Today: Proceedings 28, pages 2077-2083.
Crossref
Crossref
Jalumedi Babu, Lijo Paul & João Paulo Davim. 2020. High Speed Machining. High Speed Machining
63
96
.
M Mudhukrishnan, P Hariharan, K Palanikumar & B Latha. (2018) Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber–reinforced polypropylene composites. Journal of Thermoplastic Composite Materials 32:11, pages 1485-1508.
Crossref
Crossref
S Chandrabakty, I Renreng, Z Djafar & H Arsyad. (2019) An optimization of the machining parameters on delamination in drilling ramie woven reinforced composites using Taguchi method. Journal of Physics: Conference Series 1341:5, pages 052005.
Crossref
Crossref
Norberto Feito, Ana Muñoz-Sánchez, Antonio Díaz-Álvarez & José Antonio Loya. (2019) Analysis of the Machinability of Carbon Fiber Composite Materials in Function of Tool Wear and Cutting Parameters Using the Artificial Neural Network Approach. Materials 12:17, pages 2747.
Crossref
Crossref
Ushasta Aich, Rasmi Ranjan Behera & Simul Banerjee. (2019) Modeling of delamination in drilling of glass fiber-reinforced polyester composite by support vector machine tuned by particle swarm optimization. International Journal of Plastics Technology 23:1, pages 77-91.
Crossref
Crossref
Daxi Geng, Yihang Liu, Zhenyu Shao, Zhenghui Lu, Jun Cai, Xun Li, Xinggang Jiang & Deyuan Zhang. (2019) Delamination formation, evaluation and suppression during drilling of composite laminates: A review. Composite Structures 216, pages 168-186.
Crossref
Crossref
Emel Kuram. (2017) Micro-milling of unreinforced and reinforced polypropylene. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:1, pages 87-98.
Crossref
Crossref
K. Siva Prasad & G. Chaitanya. (2019) Analysis of delamination in drilling of GFRP composites using Taguchi Technique. Materials Today: Proceedings 18, pages 3252-3261.
Crossref
Crossref
E.K. Mohammed Yaser & K. Shunmugesh. (2019) Multi-objective optimization of milling process parameters in glass fibre reinforced polymer via grey relational analysis and desirability function. Materials Today: Proceedings 11, pages 1015-1023.
Crossref
Crossref
Gopalakrishnan Ramya Devi & Kayaroganam Palanikumar. (2019) Analysis on drilling of woven glass fibre reinforced aluminium sandwich laminates. Journal of Materials Research and Technology 8:1, pages 1024-1035.
Crossref
Crossref
Sushil N. Mhaske, Khanindra Pathak & Arnab Basak. (2019) A comprehensive design of rainfall simulator for the assessment of soil erosion in the laboratory. CATENA 172, pages 408-420.
Crossref
Crossref
S. Prakash, P.V. Siva Teja, J. Lilly Mercy & A.B. Abdullah. 2019. Hole-Making and Drilling Technology for Composites. Hole-Making and Drilling Technology for Composites
101
114
.
Vipin Pahuja, Suman Kant, Chandrashekhar S. Jawalkar & Rajeev Verma. 2019. Manufacturing Engineering. Manufacturing Engineering
117
135
.
Narinder Singh, Rupinder Singh & I P S Ahuja. (2018) On Development of Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting from Al2O3/SiC Reinforced Waste Low Density Polyethylene. Transactions of the Indian Institute of Metals 71:10, pages 2479-2485.
Crossref
Crossref
Kalyan Kumar Singh & Dhiraj Kumar. (2016) Experimental investigation and modelling of drilling on multi-wall carbon nanotube–embedded epoxy/glass fabric polymeric nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:11, pages 1943-1959.
Crossref
Crossref
Burak Yenigun & Erol Kilickap. (2018) Prediction of the Tensile Load of Drilled CFRP by Artificial Neural Network. Applied Sciences 8:4, pages 549.
Crossref
Crossref
G. Anand, N. Alagumurthi, R. Elansezhian, K. Palanikumar & N. Venkateshwaran. (2018) Investigation of drilling parameters on hybrid polymer composites using grey relational analysis, regression, fuzzy logic, and ANN models. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:4.
Crossref
Crossref
R Arun Ramnath, PR Thyla, N Mahendra Kumar & S Aravind. (2017) Optimization of machining parameters of composites using multi-attribute decision-making techniques: A review. Journal of Reinforced Plastics and Composites 37:2, pages 77-89.
Crossref
Crossref
A. R. Othman, M. H. Hassan, Elmi Abu Bakar & W. A. F. W. Othman. 2018. Intelligent Manufacturing & Mechatronics. Intelligent Manufacturing & Mechatronics
141
154
.
S. Ragunath, C. Velmurugan & T. Kannan. (2017) Optimization of drilling delamination behavior of GFRP/clay nano-composites using RSM and GRA methods. Fibers and Polymers 18:12, pages 2400-2409.
Crossref
Crossref
M.P. Jenarthanan, Karthikeyan M.Naresh Neeli. (2017) Mathematical modeling of delamination factor on drilling of ARALL composites through RSM. Multidiscipline Modeling in Materials and Structures 13:4, pages 578-589.
Crossref
Crossref
Nagaraja Shetty, S.M. Shahabaz, S.S. Sharma & S. Divakara Shetty. (2017) A review on finite element method for machining of composite materials. Composite Structures 176, pages 790-802.
Crossref
Crossref
M. Dundar, F. Ficici, F. Ozen & H. Unal. (2017) Investigation of the Delamination Factor of Glass Sphere and Silicon Particle Reinforced (GS-SCR) Hybrid Composite Material. Acta Physica Polonica A 131:3, pages 595-597.
Crossref
Crossref
Kishore Debnath, Inderdeep Singh & Akshay Dvivedi. (2017) On the analysis of force during secondary processing of natural fiber-reinforced composite laminates. Polymer Composites 38:1, pages 164-174.
Crossref
Crossref
Rasmi Ranjan Behera, Ranjan Kr. Ghadai, Kanak Kalita & Simul Banerjee. (2016) Simultaneous prediction of delamination and surface roughness in drilling GFRP composite using ANN. International Journal of Plastics Technology 20:2, pages 424-450.
Crossref
Crossref
Saurin Sheth & P.M. George. (2016) Experimental investigation, prediction and optimization of cylindricity and perpendicularity during drilling of WCB material using grey relational analysis. Precision Engineering 45, pages 33-43.
Crossref
Crossref
N. S. Balaji, S. Jayabal & S. Kalyana Sundaram. (2015) A Neural Network Based Prediction Modeling for Machinability Characteristics of Zea Fiber-Polyester Composites. Transactions of the Indian Institute of Metals 69:4, pages 881-889.
Crossref
Crossref
Emel Kuram. (2016) Micro-machinability of injection molded polyamide 6 polymer and glass-fiber reinforced polyamide 6 composite. Composites Part B: Engineering 88, pages 85-100.
Crossref
Crossref
Haijin Wang, Jie Sun, Jianfeng Li, Laixiao Lu & Nan Li. (2015) Evaluation of cutting force and cutting temperature in milling carbon fiber-reinforced polymer composites. The International Journal of Advanced Manufacturing Technology 82:9-12, pages 1517-1525.
Crossref
Crossref
Jinyang Xu, Ali Mkaddem & Mohamed El Mansori. (2016) Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review. Composite Structures 135, pages 316-338.
Crossref
Crossref
A.A. Abdul Nasir, A.I. Azmi & A.N.M. Khalil. (2015) Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement 75, pages 298-307.
Crossref
Crossref
MAJ Bosco, K Palanikumar, B Durga Prasad & A Velayudham. (2014) Analysis on influence of machining parameters on thrust force in drilling GFRP-armor steel sandwich composites. Journal of Composite Materials 49:13, pages 1539-1551.
Crossref
Crossref
F. Ficici & Z. Ayparcasi. (2015) Effects of cutting parameters on delamination during drilling of Polyphthalamide (PPA) Matrix Composite Material with 30% Glass Fiber Reinforcement. Acta Physica Polonica A 127:4, pages 1118-1120.
Crossref
Crossref
Ahmet Yardimeden, Erol Kilickap & Yahya Hisman Celik. (2014) Effects of Cutting Parameters and Point Angle on Thrust Force and Delamination in Drilling of CFRP. Materials Testing 56:11-12, pages 1042-1048.
Crossref
Crossref
Hong Fei Wang, Hua Zhou Li, Long Sheng Lu, Ying Xi Xie & Yu Xiao. (2014) Delamination Analysis in Drilling Carbon Fiber-Reinforced Composites. Applied Mechanics and Materials 697, pages 62-66.
Crossref
Crossref
Vahid Moosavi, Mehdi Vafakhah, Bagher Shirmohammadi & Maryam Ranjbar. (2013) Optimization of Wavelet-ANFIS and Wavelet-ANN Hybrid Models by Taguchi Method for Groundwater Level Forecasting. Arabian Journal for Science and Engineering 39:3, pages 1785-1796.
Crossref
Crossref
Yahya Hışman Çelik, Erol Kılıçkap & Ahmet Yardımeden. (2014) Estimate of cutting forces and surface roughness in end milling of glass fiber reinforced plastic composites using fuzzy logic system. Science and Engineering of Composite Materials 21:3.
Crossref
Crossref
Suleyman Neseli. (2014) Optimization of Process Parameters with Minimum Thrust Force and Torque in Drilling Operation Using Taguchi Method. Advances in Mechanical Engineering 6, pages 925382.
Crossref
Crossref
Na Han, Ifty Ahmed, Andrew J Parsons, Lee Harper, Colin A Scotchford, Brigitte E Scammell & Chris D Rudd. (2011) Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates. Journal of Biomaterials Applications 27:8, pages 990-1002.
Crossref
Crossref
T.V. Rajamurugan, K. Shanmugam & K. Palanikumar. (2013) Analysis of delamination in drilling glass fiber reinforced polyester composites. Materials & Design 45, pages 80-87.
Crossref
Crossref
M.A.J. Bosco, K. Palanikumar, B. Durga Prasad & A. Velayudham. (2013) Influence of Machining Parameters on Delamination in Drilling of GFRP-armour Steel Sandwich Composites. Procedia Engineering 51, pages 758-763.
Crossref
Crossref
Seyed Hamidreza Sadeghi, Vahid Moosavi, Ayoob Karami & Negin Behnia. (2012) Soil erosion assessment and prioritization of affecting factors at plot scale using the Taguchi method. Journal of Hydrology 448-449, pages 174-180.
Crossref
Crossref
J Sudha, S Sampathkumar & R Kishore Kumar. (2011) Condition monitoring of delamination during drilling of GFRP composites using the acoustic emission technique – a neural network model. Insight - Non-Destructive Testing and Condition Monitoring 53:8, pages 445-449.
Crossref
Crossref
Erol Kilickap. (2010) Analysis and modeling of delamination factor in drilling glass fiber reinforced plastic using response surface methodology. Journal of Composite Materials 45:6, pages 727-736.
Crossref
Crossref