Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 23, 2008 - Issue 8
Submit an article Journal homepage
192
Views
15
CrossRef citations to date
0
Altmetric
Original Articles

Effect of Feed Rate on Tool Wear in Milling of Al-4%Cu/B4 Cp Composite

Mustafa Übeylı Mechanical Engineering, TOBB Economics and Technology University, Ankara, TurkeyCorrespondence[email protected]
,
Adem Acir Mechanical Education, Gazi University, Teknikokullar, Ankara, Turkey
,
M. Serdar Karakaş Metallurgical and Materials Engineering, Middle East Technical University, Ankara, Turkey
&
Bilgehan Ögel Metallurgical and Materials Engineering, Middle East Technical University, Ankara, Turkey
Pages 865-870 | Received 17 May 2008, Accepted 13 Jun 2008, Published online: 04 Nov 2008

Citations (15)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

S. Thirumalai Kumaran, Tae Jo Ko, M. Uthayakumar, M. Adam Khan & Imran Muhammad. (2017) Some experimental investigations on drilling AA (6351)-SiC-B4C composite. Materials and Manufacturing Processes 32:13, pages 1557-1564.
Read now
Arun Premnath. (2016) Impact of graphite particle on milling of Al/15Al2O3 and Al/15Al2O3/5Gr composites. Particulate Science and Technology 34:6, pages 707-715.
Read now
A. Arun Premnath, T. Alwarsamy & T. Rajmohan. (2012) Experimental Investigation and Optimization of Process Parameters in Milling of Hybrid Metal Matrix Composites. Materials and Manufacturing Processes 27:10, pages 1035-1044.
Read now
M Übeyli, A Acır, Ö Keleş & C E Akçay. (2011) Effect of cutting parameters on cutting force and surface roughness in milling alumina reinforced Al–6Zn–2Mg–2Cu composites. Powder Metallurgy 54:2, pages 172-176.
Read now

Articles from other publishers (11)

Kanak Kalita, Vikas Kumar & Shankar Chakraborty. (2023) A novel MOALO-MODA ensemble approach for multi-objective optimization of machining parameters for metal matrix composites. Multiscale and Multidisciplinary Modeling, Experiments and Design 6:1, pages 179-197.
Crossref
R. Meby Selvaraj & N. Rajesh Jesudoss Hynes. (2021) Influence of processing conditions and issues in Machining of aluminum metal matrix composites. Materials Today: Proceedings 47, pages 7035-7040.
Crossref
Ajay R. Bhardwaj, AM. Vaidya & SP. Shekhawat. (2020) Machining of Aluminium Metal Matrix Composite: A Review. Materials Today: Proceedings 21, pages 1396-1402.
Crossref
Bin Luo, Kaifu Zhang, Yuan Li, Hui Cheng & Shunuan Liu. (2017) Modelling of thrust force for worn drill bits characterised by cutting edge radius in drilling carbon fibre–reinforced plastic/Ti-6Al-4V alloy stacks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:11, pages 1960-1972.
Crossref
Seyed Ali Niknam, Saeid Kamalizadeh, Alireza Asgari & Marek Balazinski. (2018) Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 253-265.
Crossref
Carl J. Nicholls, Brian Boswell, Ian J. Davies & M. N. Islam. (2016) Review of machining metal matrix composites. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 2429-2441.
Crossref
A. TASKESEN & K. KUTUKDE. (2015) Non-contact measurement and multi-objective analysis of drilling temperature when drilling B4C reinforced aluminum composites. Transactions of Nonferrous Metals Society of China 25:1, pages 271-283.
Crossref
Ahmet Taşkesen, Kemal Aldas, İskender Özkul, Kenan Kütükde & Yavuz Zumrut. (2014) Analysis of thrust force in drilling B4C-reinforced aluminium alloy using genetic learning algorithm. The International Journal of Advanced Manufacturing Technology 75:1-4, pages 237-245.
Crossref
Ahmet Taşkesen & Kenan Kütükde. (2014) Experimental investigation and multi-objective analysis on drilling of boron carbide reinforced metal matrix composites using grey relational analysis. Measurement 47, pages 321-330.
Crossref
A. Arun Premnath, T. Alwarsamy & T. Abhinav. 2012. Emerging Trends in Science, Engineering and Technology. Emerging Trends in Science, Engineering and Technology 305 315 .
Adem Acır,Yakup Turgut,Mustafa Übeyli,Mustafa Günay,Ulvi Şeker,. (2009) A Study on the Cutting Force in Milling of Boron Carbide Particle Reinforced Aluminium Composite. Science and Engineering of Composite Materials 16:3, pages 187-196.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.