Amos Gamaleal David, Vimal Samsingh Ramalingam & Esther Florence Sundarsingh. (2023) A novel real time sensing framework for assessment of thrust force in drilling of composites using Taguchi and NSGA-II. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Crossref
I. Infanta Mary Priya, K. Palanikumar, N. Senthilkumar & P. Siva Prabha. (2023) Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Suxiao Zhao, Xiaopeng Bai, Daochun Xu & Wan Cao. (2023) Effects and Mechanism of Micro-Drilling Parameters on the Drilling Force and Hole Morphology of Sapindus mukorossi Seeds. Forests 14:6, pages 1162.
Crossref
Praveenkumara Jagadeesh, Sanjay Mavinkere Rangappa, Indran Suyambulingam, Suchart Siengchin, Madhu Puttegowda, Joseph Selvi Binoj, Sergey Gorbatyuk, Anish Khan, Mrityunjay Doddamani, Vincenzo Fiore & Marta María Moure Cuadrado. (2023) Drilling characteristics and properties analysis of fiber reinforced polymer composites: A comprehensive review. Heliyon 9:3, pages e14428.
Crossref
Jogendra Kumar, Shivi Kesarwani, Prakhar Kumar Kharwar, Mark J. Jackson & Rajesh Kumar Verma. (2022) Mechanical performance and drilling machinability evaluation of carbon nano onions (CNOs) reinforced polymer nanocomposites. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:1, pages 169-186.
Crossref
Ivana Jovanović, Fardis Nakhaei, Daniel Kržanović, Vesna Conić & Daniela Urošević. (2022) Comparison of Fuzzy and Neural Network Computing Techniques for Performance Prediction of an Industrial Copper Flotation Circuit. Minerals 12:12, pages 1493.
Crossref
Chang Liu, Cheng Li, Weiwei Xu & Lei Gao. (2022) Variation characteristics of machinability in drilling of SiC particle reinforced aluminum matrix (SiCp/Al) composite with a wide range of particle volume fractions. The International Journal of Advanced Manufacturing Technology 121:9-10, pages 6285-6302.
Crossref
Baranitharan Paramasivam, S. Kumanan, V. Kavimani & M. Varatharajulu. (2022) Fuzzy-based prediction of compression ignition engine distinctiveness powered by novel graphene oxide nanosheet additive diesel–Aegle marmelos pyrolysis oil ternary opus. International Journal of Energy and Environmental Engineering 13:2, pages 683-701.
Crossref
S. Rajamuneeswaran, S. Jayabal, N. Nagaprasad, G. Veerappan, Leta Tesfaye Jule & Ramaswamy Krishnaraj. (2022) Artificial Neural Network Modeling of Abrasion Loss and Surface Roughness of Crab Carapace Impregnated Coir Vinyl Ester Composites. Advances in Materials Science and Engineering 2022, pages 1-8.
Crossref
T. Rajasekaran, K. Palanikumar & B. Latha. (2021) Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques. Carbon Letters 32:2, pages 615-627.
Crossref
Ferit Ficici. (2021) Investigation of thrust force in drilling polyphthalamide (PPA) composites. Measurement 182, pages 109505.
Crossref
Gökhan BAŞAR, Hediye KIRLI AKIN & Funda KAHRAMAN. (2020) Tepki yüzeyi metodolojisi kullanılarak nanokompozitin delinmesinde oluşan itme kuvvetinin modellenmesi ve analizi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 8:2, pages 293-305.
Crossref
B. Satheesh Kumar, Neelam Parimala & P. Vamsi Krishna. 2020. Advances in Applied Mechanical Engineering. Advances in Applied Mechanical Engineering
1147
1158
.
R. Kumar, N. Rajesh Jesudoss Hynes, Catalin Iulian Pruncu & J. Angela Jennifa Sujana. (2019) Multi-objective optimization of green technology thermal drilling process using grey-fuzzy logic method. Journal of Cleaner Production 236, pages 117711.
Crossref
V Kaviarasan, R Venkatesan & Elango Natarajan. (2019) Prediction of surface quality and optimization of process parameters in drilling of Delrin using neural network. Progress in Rubber, Plastics and Recycling Technology 35:3, pages 149-169.
Crossref
T Sampath Kumar, R Ramanujam, M Vignesh, Dunna Rohith, Vavilapalli Manoj & Peddi Hema Sankar. (2019) Comparative machining studies on custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach. Materials Research Express 6:6, pages 066411.
Crossref
K. Ananthakumar & S. Kumaran. (2018) Fuzzy Logic Model System for Prediction of Process Parameters by Plasma Assisted Diffusion Bonding of Dissimilar Alloys. Experimental Techniques 43:1, pages 105-115.
Crossref
Mridusmita Roy Choudhury, Maddula Shanmuka Srinivas & Kishore Debnath. (2018) Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. Journal of Manufacturing Processes 34, pages 51-61.
Crossref
R Arun Ramnath, PR Thyla, N Mahendra Kumar & S Aravind. (2017) Optimization of machining parameters of composites using multi-attribute decision-making techniques: A review. Journal of Reinforced Plastics and Composites 37:2, pages 77-89.
Crossref
R.L. Anand, V.N. Gaitonde & Bhagyashree Desai. (2018) Machinability Studies of Cenosphere Reinforced Epoxy Composites. Materials Today: Proceedings 5:11, pages 25509-25518.
Crossref
Inderdeep Singh & Kishore Debnath. 2017. Materials Science and Engineering. Materials Science and Engineering
112
135
.
Kishore Debnath, Inderdeep Singh & Akshay Dvivedi. (2017) On the analysis of force during secondary processing of natural fiber-reinforced composite laminates. Polymer Composites 38:1, pages 164-174.
Crossref
Xin Huang, Lijuan Zheng, Chengyong Wang, Linfang Wang, Dantian Lin, Bingmiao Liao & Lunqiang Zhang. (2016) Drilling characteristics of entry board and the influence on PCB micro drilling process. Drilling characteristics of entry board and the influence on PCB micro drilling process.
Arkadeb Mukhopadhyay, Santanu Duari, Tapan Kumar Barman & Prasanta Sahoo. (2015) Tribological Performance Optimization of Electroless Ni–B Coating under Lubricated Condition using Hybrid Grey Fuzzy Logic. Journal of The Institution of Engineers (India): Series D 97:2, pages 215-231.
Crossref
Emel Kuram & Babur Ozcelik. (2014) Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling. Journal of Intelligent Manufacturing 27:4, pages 817-830.
Crossref
Vikas Dhawan, Kishore Debnath, Inderdeep Singh & Sehijpal Singh. (2015) A novel intelligent software-based approach to predict forces and delamination during drilling of fiber-reinforced plastics. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230:2, pages 603-614.
Crossref
Rupesh Kumar Pandey & S. S. Panda. (2013) Optimization of bone drilling using Taguchi methodology coupled with fuzzy based desirability function approach. Journal of Intelligent Manufacturing 26:6, pages 1121-1129.
Crossref
Inderdeep Singh & Kishore Debnath. 2015. Processing Techniques and Tribological Behavior of Composite Materials. Processing Techniques and Tribological Behavior of Composite Materials
317
340
.
Vikas Dhawan, Sehijpal Singh & Inderdeep Singh. 2015. Research Methods. Research Methods
1040
1051
.
A.K. Parida, R.K. Bhuyan & B.C. Routara. (2015) A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite. A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite.
Rupesh Kumar Pandey & Sudhansu Sekhar Panda. (2014) A feasibility investigation for modeling and optimization of temperature in bone drilling using fuzzy logic and Taguchi optimization methodology. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 228:11, pages 1135-1145.
Crossref
N.S. Balaji, S. Jayabal, S. Kalyana Sundaram, S. Rajamuneeswaran & P. Suresh. (2014) Delamination Analysis in Drilling of Coir-Polyester Composites Using Design of Experiments. Advanced Materials Research 984-985, pages 185-193.
Crossref
Vikas Dhawan, Sehijpal Singh & Inderdeep Singh. (2014) Predicting Drilling Forces and Delamination in GFRP Laminates using Fuzzy Logic. International Journal of Materials Forming and Machining Processes 1:2, pages 32-43.
Crossref
V.S. Senthil Kumar & C. Ezilarasan. (2013) Soft Computing Applications in Drilling of GFRP Composites: A Review. Materials Science Forum 766, pages 99-107.
Crossref
S. Jayabal, S. Rajamuneeswaran, R. Ramprasath & N. S. Balaji. (2013) Artificial Neural Network Modeling of Mechanical Properties of Calcium Carbonate Impregnated Coir-Polyester Composites. Transactions of the Indian Institute of Metals 66:3, pages 247-255.
Crossref
Rupesh Kumar Pandey & S.S. Panda. (2012) Modeling of Temperature in Orthopaedic Drilling Using Fuzzy Logic. Applied Mechanics and Materials 249-250, pages 1313-1318.
Crossref
T Rajasekaran, K Palanikumar & BK Vinayagam. (2011) Experimental investigation and analysis in turning of CFRP composites. Journal of Composite Materials 46:7, pages 809-821.
Crossref
A.I. Azmi. (2012) Design of Fuzzy Logic Model for the Prediction of Tool Performance During Machining of Composite Materials. Procedia Engineering 38, pages 208-217.
Crossref
K. Palanikumar. (2011) Experimental investigation and optimisation in drilling of GFRP composites. Measurement 44:10, pages 2138-2148.
Crossref
T. Rajasekaran, K. Palanikumar & B. K. Vinayagam. (2011) Application of fuzzy logic for modeling surface roughness in turning CFRP composites using CBN tool. Production Engineering 5:2, pages 191-199.
Crossref
T Rajasekaran, B K Vinayagam, K Palanikumar & S Prakash. (2010) Influence of machining parameters on surface roughness and material removal rate in machining carbon fiber reinforced polymer material. Influence of machining parameters on surface roughness and material removal rate in machining carbon fiber reinforced polymer material.