Citations (136)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (28)
Tapas Chakraborty, Deepti Ranjan Sahu, Amitava Mandal & Bappa Acherjee. (2023) Feasibility of Jatropha and Rice bran vegetable oils as sustainable EDM dielectrics. Materials and Manufacturing Processes 38:1, pages 50-63.
Read now
Read now
Surendra Singh, Brijesh Patel, Rajeev Kumar Upadhyay & Nishant K. Singh. (2022) Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review. Advances in Materials and Processing Technologies 8:3, pages 3074-3104.
Read now
Read now
Sivaprakasam P, Udaya Prakash J, Hariharan P & Gowri S. (2022) Micro-electric discharge machining (Micro-EDM) of aluminium alloy and aluminium matrix composites - a review. Advances in Materials and Processing Technologies 8:2, pages 1699-1714.
Read now
Read now
Ishwar Bhiradi, Leera Raju & Somashekhar S Hiremath. (2020) Adaptive neuro-fuzzy inference system (ANFIS): modelling, analysis, and optimisation of process parameters in the micro-EDM process. Advances in Materials and Processing Technologies 6:1, pages 133-145.
Read now
Read now
Pushpendra S. Bharti. (2020) Two-step optimization of electric discharge machining using neural network based approach and TOPSIS. Journal of Interdisciplinary Mathematics 23:1, pages 81-96.
Read now
Read now
P. Mathan Kumar, K. Sivakumar & N. Jayakumar. (2018) Multiobjective optimization and analysis of copper–titanium diboride electrode in EDM of monel 400™ alloy. Materials and Manufacturing Processes 33:13, pages 1429-1437.
Read now
Read now
Manwendra K. Tripathi, P. P. Chattopadhyay & Subhas Ganguly. (2017) Evolutionary intelligence in design and synthesis of bulk metallic glasses by mechanical alloying. Materials and Manufacturing Processes 32:10, pages 1059-1066.
Read now
Read now
Priyanka Devi Pantula, Srinivas Soumitri Miriyala & Kishalay Mitra. (2017) KERNEL: Enabler to build smart surrogates for online optimization and knowledge discovery. Materials and Manufacturing Processes 32:10, pages 1162-1171.
Read now
Read now
R. Manivannan & M. Pradeep Kumar. (2017) Multi-attribute decision-making of cryogenically cooled micro-EDM drilling process parameters using TOPSIS method. Materials and Manufacturing Processes 32:2, pages 209-215.
Read now
Read now
Farshid Jafarian, Domenico Umbrello, Saeid Golpayegani & Zahra Darake. (2016) Experimental Investigation to Optimize Tool Life and Surface Roughness in Inconel 718 Machining. Materials and Manufacturing Processes 31:13, pages 1683-1691.
Read now
Read now
B. Kuriachen & J. Mathew. (2016) Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V. Materials and Manufacturing Processes 31:4, pages 439-446.
Read now
Read now
B. Kuriachen & J. Mathew. (2015) Experimental Investigations into the Effects of Microelectric-Discharge Milling Process Parameters on Processing Ti–6Al–4V. Materials and Manufacturing Processes 30:8, pages 983-990.
Read now
Read now
S.P. Leo Kumar, J. Jerald, S. Kumanan & R. Prabakaran. (2014) A Review on Current Research Aspects in Tool-Based Micromachining Processes. Materials and Manufacturing Processes 29:11-12, pages 1291-1337.
Read now
Read now
Farshid Jafarian, Hossein Amirabadi, Javad Sadri & Hamid
Reza Banooie. (2014) Simultaneous Optimizing Residual Stress and Surface Roughness in Turning of Inconel718 Superalloy. Materials and Manufacturing Processes 29:3, pages 337-343.
Read now
Read now
Palani Sivaprakasam, P. Hariharan & S. Gowri. (2013) Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach. Materials and Manufacturing Processes 28:12, pages 1340-1347.
Read now
Read now
T. Muthuramalingam, B. Mohan, A. Rajadurai & M.
D. Antony Arul Prakash. (2013) Experimental Investigation of Iso Energy Pulse Generator on Performance Measures in EDM. Materials and Manufacturing Processes 28:10, pages 1137-1142.
Read now
Read now
Pankaj
Kumar Shrivastava & Avanish
Kumar Dubey. (2013) Intelligent Modeling and Multiobjective Optimization of Electric Discharge Diamond Grinding. Materials and Manufacturing Processes 28:9, pages 1036-1041.
Read now
Read now
T. Muthuramalingam & B. Mohan. (2013) Influence of Tool Electrode Properties on Machinability in Spark Erosion Machining. Materials and Manufacturing Processes 28:8, pages 939-943.
Read now
Read now
S. Rajendran, K. Marimuthu & M. Sakthivel. (2013) Study of Crack Formation and Resolidified Layer in EDM Process on T90Mn2W50Cr45 Tool Steel. Materials and Manufacturing Processes 28:6, pages 664-669.
Read now
Read now
A. Kadirvel, P. Hariharan & S. Gowri. (2013) Experimental Investigation on the Electrode Specific Performance in Micro-EDM of Die-Steel. Materials and Manufacturing Processes 28:4, pages 390-396.
Read now
Read now
T. Muthuramalingam & B. Mohan. (2013) Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining. Materials and Manufacturing Processes 28:4, pages 375-380.
Read now
Read now
Sunil
Sheshrao Baraskar, S.S. Banwait & S.C. Laroiya. (2013) Multiobjective Optimization of Electrical Discharge Machining Process Using a Hybrid Method. Materials and Manufacturing Processes 28:4, pages 348-354.
Read now
Read now
Rajarshi Mukherjee & Shankar Chakraborty. (2012) Selection of EDM Process Parameters Using Biogeography-Based Optimization Algorithm. Materials and Manufacturing Processes 27:9, pages 954-962.
Read now
Read now
Vijay
Kumar Meena & Man
Singh Azad. (2012) Grey Relational Analysis of Micro-EDM Machining of Ti-6Al-4V Alloy. Materials and Manufacturing Processes 27:9, pages 973-977.
Read now
Read now
Rina Chakravorty, Susanta
Kumar Gauri & Shankar Chakraborty. (2012) Optimization of Correlated Responses of EDM Process. Materials and Manufacturing Processes 27:3, pages 337-347.
Read now
Read now
K Ojha, R K Garg & K K Singh. (2011) Effect of chromium powder suspended dielectric on surface roughness in PMEDM process. Tribology - Materials, Surfaces & Interfaces 5:4, pages 165-171.
Read now
Read now
Dar-Yuan Chang, Ping-Chen Shen, Jung-Chou Hung, Shuo-Jen Lee & Hai-Ping Tsui. (2011) Process Simulation–Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining. Materials and Manufacturing Processes 26:12, pages 1451-1458.
Read now
Read now
J. Edwin
Raja Dhas & Somasundaram Kumanan. (2011) Modeling of Residual Stress in Butt Welding. Materials and Manufacturing Processes 26:7, pages 942-947.
Read now
Read now
Articles from other publishers (108)
Hoang-Tien Cao, Jeng-Rong Ho, Pi-Cheng Tung, Yuan-Ting Lin & Chih-Kuang Lin. (2024) Machined quality prediction and optimization for micro-EDM drilling of semi-conductive SiC wafer. Materials Science in Semiconductor Processing 169, pages 107911.
Crossref
Crossref
Mahboob Elahi, Samuel Olaiya Afolaranmi, Jose Luis Martinez Lastra & Jose Antonio Perez Garcia. (2023) A comprehensive literature review of the applications of AI techniques through the lifecycle of industrial equipment. Discover Artificial Intelligence 3:1.
Crossref
Crossref
Luis O. Lara-Cerecedo, Jesús F. Hinojosa, Nun Pitalúa-Díaz, Yasuhiro Matsumoto & Alvaro González-Angeles. (2023) Prediction of the Electricity Generation of a 60-kW Photovoltaic System with Intelligent Models ANFIS and Optimized ANFIS-PSO. Energies 16:16, pages 6050.
Crossref
Crossref
Kun Zhou, Shuai Wang, Rui Zhou & Binrui Wang. (2022) Admittance control design and system testing of industrial robot polishing operation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:10, pages 1538-1552.
Crossref
Crossref
Mohammad Mainul Hasan, Tanveer Saleh, Ali Sophian, M. Azizur Rahman, Tao Huang & Mohamed Sultan Mohamed Ali. (2023) Experimental modeling techniques in electrical discharge machining (EDM): A review. The International Journal of Advanced Manufacturing Technology 127:5-6, pages 2125-2150.
Crossref
Crossref
Thella Babu Rao. (2022) Prediction of EDMed micro-hole quality characteristics using hybrid bio-inspired machine learning-based predictive approaches. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 747-764.
Crossref
Crossref
Ashok Kumar Sharma, Vishal Singh, Ashish Goyal, Ankit D. Oza, Kiran S. Bhole & Manoj Kumar. (2023) Experimental analysis of Inconel 625 alloy to enhance the dimensional accuracy with vibration assisted micro-EDM. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Yogesh Sable & H.M. Dharmadhikari. (2023) Artificial Neural Network prediction model for MRR in WEDM of WC-Co. Materials Today: Proceedings 72, pages 1650-1656.
Crossref
Crossref
Elias Tabane. 2023. 5th International Conference on Wireless, Intelligent and Distributed Environment for Communication. 5th International Conference on Wireless, Intelligent and Distributed Environment for Communication
15
28
.
NITIN KUMAR SAHU, MUKESH KUMAR SINGH, ATUL KUMAR SAHU & ANOOP KUMAR SAHU. (2022) SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY. Surface Review and Letters 29:11.
Crossref
Crossref
Arun Kumar Rouniyar & Pragya Shandilya. (2022) Soft computing techniques for modelling and multi-objective optimization of magnetic field assisted powder mixed EDM process. Neural Computing and Applications 34:21, pages 18993-19014.
Crossref
Crossref
Haigang Liang & Jinwei Qiao. (2022) Analysis of Current Situation, Demand and Development Trend of Casting Grinding Technology. Micromachines 13:10, pages 1577.
Crossref
Crossref
Ľuboslav Straka, Miroslav Gombár, Alena Vagaská & Patrik Kuchta. (2022) Efficiency Optimization of the Electroerosive Process in µ-WEDM of Steel MS1 Sintered Using DMLS Technology. Micromachines 13:9, pages 1446.
Crossref
Crossref
Hadi Gholizadeh, Amir M. Fathollahi-Fard, Hamed Fazlollahtabar & Vincent Charles. (2022) Fuzzy data-driven scenario-based robust data envelopment analysis for prediction and optimisation of an electrical discharge machine’s parameters. Expert Systems with Applications 193, pages 116419.
Crossref
Crossref
Wan Ahmad Bin Wan Azhar, Tanveer Saleh & Mohd Asyraf Bin Mohd Razib. (2022) Application of CANFIS for modelling and predicting multiple output performances for different materials in µEDM. CIRP Journal of Manufacturing Science and Technology 37, pages 528-546.
Crossref
Crossref
M Vivekanandhan, K Rajmohan & C Senthilkumar. (2022) Modeling and prediction of electrical discharge machining performance parameters for AA 8081 hybrid composite using artificial neural network. Surface Topography: Metrology and Properties 10:1, pages 015007.
Crossref
Crossref
Ananya Upadhyay, Ved Prakash & Vinay Sharma. 2022. Research Anthology on Artificial Neural Network Applications. Research Anthology on Artificial Neural Network Applications
843
866
.
Mariangela Quarto, Gianluca D'Urso & Claudio Giardini. (2022) Micro-EDM optimization through particle swarm algorithm and artificial neural network. Precision Engineering 73, pages 63-70.
Crossref
Crossref
Raju Bhosle, Umeshchandra Mane, Jeet Patil & Balaji Dabade. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
369
378
.
V. Rajashekar & Shivraj Narayan Yeole. 2022. Advances in Mechanical and Materials Technology. Advances in Mechanical and Materials Technology
1363
1376
.
Abhijit Saha, Pritam Pain & Goutam Kumar Bose. 2022. Nonlinear Dynamics and Applications. Nonlinear Dynamics and Applications
675
683
.
Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2020) Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes. Journal of Intelligent Manufacturing 32:8, pages 2125-2145.
Crossref
Crossref
P Suresh & Raja K Venkatesh. (2021) Assessment on the Optimum Performance of a Novel 3 Axes Micro EDM Developed for Commercial Applications. Strojnícky časopis - Journal of Mechanical Engineering 71:2, pages 305-316.
Crossref
Crossref
Atanas Ivanov, Abhishek Lahiri, Venelin Baldzhiev & Anna Trych-Wildner. (2021) Suggested Research Trends in the Area of Micro-EDM—Study of Some Parameters Affecting Micro-EDM. Micromachines 12:10, pages 1184.
Crossref
Crossref
Jambeswar Sahu & Sonam Shrivastava. (2021) Fuzzy based multi-response optimization: a case study on EDM machining process. SN Applied Sciences 3:7.
Crossref
Crossref
Changhong Liu, Xingxin Yang, Shaohu Peng, Yongjun Zhang, Lingxi Peng & Ray Y. Zhong. (2021) Spark Analysis Based on the CNN-GRU Model for WEDM Process. Micromachines 12:6, pages 702.
Crossref
Crossref
Mariangela Quarto, Gianluca D’Urso, Claudio Giardini, Giancarlo Maccarini & Mattia Carminati. (2021) A Comparison between Finite Element Model (FEM) Simulation and an Integrated Artificial Neural Network (ANN)-Particle Swarm Optimization (PSO) Approach to Forecast Performances of Micro Electro Discharge Machining (Micro-EDM) Drilling. Micromachines 12:6, pages 667.
Crossref
Crossref
Amar Sheelwant, Pavandatta M Jadhav & Suresh Kumar Reddy Narala. (2021) ANN-GA based parametric optimization of Al-TiB2 metal matrix composite material processing technique. Materials Today Communications 27, pages 102444.
Crossref
Crossref
Qi Jing, Jian Li, Yongbin Zhang, Guangmin Liu, Fang Ji & Min Xu. (2021) Research on the efficient self-adaptive servo-control strategy in micro-EDM milling. The International Journal of Advanced Manufacturing Technology 114:11-12, pages 3563-3580.
Crossref
Crossref
Gowtham Kumarasamy, Poovazhagan Lakshmanan & Geethapriyan Thangamani. (2020) Electrochemical Micromachining of Hastelloy C276 by Different Electrolyte Solutions. Arabian Journal for Science and Engineering 46:3, pages 2243-2259.
Crossref
Crossref
Deepak Rajendra Unune & Amit Aherwar. 2021. Research Anthology on Multi-Industry Uses of Genetic Programming and Algorithms. Research Anthology on Multi-Industry Uses of Genetic Programming and Algorithms
676
698
.
Kanak Kalita, Ranjan Kumar Ghadai, Dinesh S. Shinde & Xiao-Zhi Gao. 2021. Data-Driven Optimization of Manufacturing Processes. Data-Driven Optimization of Manufacturing Processes
128
150
.
K. Mandal, S. Sarkar, S. Mitra & Dipankar Bose. 2021. Machine Learning Applications in Non-Conventional Machining Processes. Machine Learning Applications in Non-Conventional Machining Processes
76
95
.
Premangshu Mukhopadhyay, Goutam Kumar Bose & Pritam Pain. 2021. Machine Learning Applications in Non-Conventional Machining Processes. Machine Learning Applications in Non-Conventional Machining Processes
18
32
.
Mohammad Pervez Mughal, Muhammad Umar Farooq, Jabir Mumtaz, Mozammel Mia, Madiha Shareef, Mahnoor Javed, Muhammad Jamil & Catalin I. Pruncu. (2021) Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM. Journal of the Mechanical Behavior of Biomedical Materials 113, pages 104145.
Crossref
Crossref
Vyom Singh, Abhishek Patel, Ashish Goyal, Anand Pandey, Ravikant Gupta & Rahul Goyal. 2021. Advances in Production and Industrial Engineering. Advances in Production and Industrial Engineering
27
38
.
Ashish Goyal, Anand Pandey, Pooja Sharma, Rakesh Kumar & Satish Namdev. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
337
348
.
Jogendra Kumar, Rajesh Kumar Verma & Kishore Debnath. (2020) A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber. Composite Structures 253, pages 112786.
Crossref
Crossref
Asarudheen Abdudeen, Jaber E. Abu Qudeiri, Ansar Kareem, Thanveer Ahammed & Aiman Ziout. (2020) Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM. Micromachines 11:8, pages 754.
Crossref
Crossref
Deepak G. Dilip, Satyananda Panda & Jose Mathew. (2020) Characterization and Parametric Optimization of Micro-hole Surfaces in Micro-EDM Drilling on Inconel 718 Superalloy Using Genetic Algorithm. Arabian Journal for Science and Engineering 45:7, pages 5057-5074.
Crossref
Crossref
Arvind Kumar, Abhishek Kumar & Ram Naresh Rai. (2020) Synthesis of Stir-Cast AA7050/5%B<sub>4</sub>C Composite and Optimization of EDM Response Parameters Using Taguchi Analysis. Key Engineering Materials 844, pages 104-113.
Crossref
Crossref
Long Ye, Xuecheng Xi, Mattia Bellotti, Jun Qian & Dominiek Reynaerts. (2020) Investigation of Advanced Control Schemes for High-speed Small-Hole EDM Drilling. Procedia CIRP 95, pages 539-544.
Crossref
Crossref
Pauline Ong, Chon Haow Chong, Mohammad Zulafif bin Rahim, Woon Kiow Lee, Chee Kiong Sia & Muhammad Ariff Haikal bin Ahmad. (2018) Intelligent approach for process modelling and optimization on electrical discharge machining of polycrystalline diamond. Journal of Intelligent Manufacturing 31:1, pages 227-247.
Crossref
Crossref
Pawan Kumar, Meenu Gupta & Vineet Kumar. (2019) Microstructural analysis and multi response optimization of WEDM of Inconel 825 using RSM based desirability approach. Journal of the Mechanical Behavior of Materials 28:1, pages 39-61.
Crossref
Crossref
Muhammad Hanif, Wasim Ahmad, Salman Hussain & Mirza Jahanzaib. (2019) INVESTIGATION OF EFFECTS OF DIELECTRIC TYPE AND POLARITY ON ELECTRIC DISCHARGE MACHINING OF AISI D2 STEEL USING RESPONSE SURFACE METHODOLOGY. NED University Journal of Research XVI:4, pages 81-93.
Crossref
Crossref
Abdullah Cemil İLÇE & Hilal SİNGER. (2019) Doğu Kayını Ahşabının Yüzey Pürüzlülüğünün Bir Yapay Sinir Ağı ile ModellenmesiModeling of Surface Roughness Belonging to Oriental Beech Wood with an Artificial Neural Networks. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 7:3, pages 1867-1878.
Crossref
Crossref
Peng Zhang, Qing Guo, Shuai Zhang & Harry Haoxiang Wang. (2017) RETRACTED ARTICLE: Pattern mining model based on improved neural network and modified genetic algorithm for cloud mobile networks. Cluster Computing 22:S4, pages 9651-9660.
Crossref
Crossref
Salila Ranjan Dixit, Sudhansu Ranjan Das & Debabrata Dhupal. (2018) Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International 15:2, pages 333-349.
Crossref
Crossref
Rakesh Chaudhari, Jay J. Vora, S. S. Mani Prabu, I. A. Palani, Vivek K. Patel, D. M. Parikh & Luis Norberto López de Lacalle. (2019) Multi-Response Optimization of WEDM Process Parameters for Machining of Superelastic Nitinol Shape-Memory Alloy Using a Heat-Transfer Search Algorithm. Materials 12:8, pages 1277.
Crossref
Crossref
Devendra Agrawal & Dinesh Kamble. (2019) Effect and optimization of photochemical machining process parameters for manufacturing array of micro-hole. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:4.
Crossref
Crossref
Muhammad Hanif, Wasim Ahmad, Salman Hussain, Mirza Jahanzaib & Abdul Hakim Shah. (2018) Investigating the effects of electric discharge machining parameters on material removal rate and surface roughness on AISI D2 steel using RSM-GRA integrated approach. The International Journal of Advanced Manufacturing Technology 101:5-8, pages 1255-1265.
Crossref
Crossref
Raneen Ali, Mozammel Mia, Aqib Khan, Wenliang Chen, Munish Gupta & Catalin Pruncu. (2019) Multi-Response Optimization of Face Milling Performance Considering Tool Path Strategies in Machining of Al-2024. Materials 12:7, pages 1013.
Crossref
Crossref
S. M. Towhidul Islam Nayim, Muhammed Zahid Hasan, Anbesh Jamwal, Sunil Thakur & Sumit Gupta. Recent trends & developments in optimization and modelling of electro-discharge machining using modern techniques: A review. Recent trends & developments in optimization and modelling of electro-discharge machining using modern techniques: A review.
Arun Kumar Pandey. (2019) Computer aided Genetic Algorithm based Optimization of Electrical Discharge Drilling in Titanium alloy (Grade-5) Sheet. Materials Today: Proceedings 18, pages 4869-4881.
Crossref
Crossref
Shiba Narayan Sahu, Sagar Kumar Murmu & Narayan Chandra Nayak. (2019) Multi-objective Optimization of EDM Process with Performance Appraisal of GA based Algorithms in Neural Network Environment. Materials Today: Proceedings 18, pages 3982-3997.
Crossref
Crossref
Soumava Boral, Sarabjeet Singh Sidhu, Prasenjit Chatterjee, Shankar Chakraborty & Agam Gugaliya. 2019. Micro-electrical Discharge Machining Processes. Micro-electrical Discharge Machining Processes
293
310
.
T. Praveena & J. Prasanna. 2019. Advances in Manufacturing Processes. Advances in Manufacturing Processes
229
238
.
Jian Li, Tao Zhang, Xineng Liu, Yisheng Guan & Danwei Wang. (2018) A Survey of Robotic Polishing. A Survey of Robotic Polishing.
Muhammad Huzaifa Raza, Ahmad Wasim, Muhammad Asad Ali, Salman Hussain & Mirza Jahanzaib. (2018) Investigating the effects of different electrodes on Al6061-SiC-7.5 wt% during electric discharge machining. The International Journal of Advanced Manufacturing Technology 99:9-12, pages 3017-3034.
Crossref
Crossref
Adik M. Takale, Nagesh K. Chougule, Preetam H. Selmokar & M.G. Gawari. (2018) Multi-Response Optimization of Micro-WEDM Process Parameters of Ti<sub>49.4</sub>-Ni<sub>50.6</sub> Shape Memory Alloy for Orthopedic Implant Application. Advanced Materials Research 1150, pages 1-21.
Crossref
Crossref
Kalipada Maity & Himanshu Mishra. (2016) ANN modelling and Elitist teaching learning approach for multi-objective optimization of
$$\upmu $$
μ
-EDM. Journal of Intelligent Manufacturing 29:7, pages 1599-1616.
Crossref
Crossref
Mustufa H. Abidi, Abdulrahman M. Al-Ahmari, Usama Umer & Mohammed Sarvar Rasheed. (2018) Multi-objective optimization of micro-electrical discharge machining of nickel-titanium-based shape memory alloy using MOGA-II. Measurement 125, pages 336-349.
Crossref
Crossref
Jayakrishnan Unnikrishna Pillai, Ikshit Sanghrajka, Manikandakumar Shunmugavel, T. Muthuramalingam, Moshe Goldberg & Guy Littlefair. (2018) Optimisation of multiple response characteristics on end milling of aluminium alloy using Taguchi-Grey relational approach. Measurement 124, pages 291-298.
Crossref
Crossref
Dong-Hyeon Kim, Thomas J. Y. Kim, Xinlin Wang, Mincheol Kim, Ying-Jun Quan, Jin Woo Oh, Soo-Hong Min, Hyungjung Kim, Binayak Bhandari, Insoon Yang & Sung-Hoon Ahn. (2018) Smart Machining Process Using Machine Learning: A Review and Perspective on Machining Industry. International Journal of Precision Engineering and Manufacturing-Green Technology 5:4, pages 555-568.
Crossref
Crossref
Yan Cherng Lin, Han Ming Chow, Hsin Min Lee & Jia Feng Liu. (2018) Modelling of the Parameters of EDM in Gas Based on Back Propagation Neural Network. Materials Science Forum 926, pages 11-16.
Crossref
Crossref
A. P. Tiwary, P. P. Das, S. Chakraborty, B. B. Pradhan & B. Bhattacharyya. (2018) Parametric Optimization of Micro-EDM Process during Micro-hole Machining on Ti-6Al-4V using WASPAS Method. IOP Conference Series: Materials Science and Engineering 377, pages 012202.
Crossref
Crossref
Ananya Upadhyay, Ved Prakash & Vinay Sharma. 2018. Design and Optimization of Mechanical Engineering Products. Design and Optimization of Mechanical Engineering Products
209
233
.
Goutam Kumar Bose & Pritam Pain. 2018. Soft Computing Techniques and Applications in Mechanical Engineering. Soft Computing Techniques and Applications in Mechanical Engineering
91
122
.
Deepak Rajendra Unune & Amit Aherwar. 2018. Handbook of Research on Emergent Applications of Optimization Algorithms. Handbook of Research on Emergent Applications of Optimization Algorithms
728
749
.
Bo Liang & Taotao Zhang. (2018) Numerical Optimization and Cyber-Physical- Social Computing for Vibrations of the Elliptical Treadmill Based on GSO-BPNN Model. IEEE Access 6, pages 10886-10895.
Crossref
Crossref
Kumar Gautam, Amit Kumar Singh & Bidesh Roy. Predicting response parameter of micro electrical discharge machining using ANFIS. Predicting response parameter of micro electrical discharge machining using ANFIS.
N. Sudheer Kumar Varma, I.R.P.K. Varma, S. Rajesh, K. Sita Rama Raju & V.V. Murali Krishnam Raju. (2018) Prediction of surface roughness and MRR in grinding process on Inconel 800 alloy using neural networks and ANFIS. Materials Today: Proceedings 5:2, pages 5445-5451.
Crossref
Crossref
S.P. Leo Kumar. (2017) State of The Art-Intense Review on Artificial Intelligence Systems Application in Process Planning and Manufacturing. Engineering Applications of Artificial Intelligence 65, pages 294-329.
Crossref
Crossref
Wuyi Ming, Zhen Zhang, Shengyong Wang, Hao Huang, Yanming Zhang, Yong Zhang & Dili Shen. (2017) Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11. The International Journal of Advanced Manufacturing Technology 92:9-12, pages 4039-4056.
Crossref
Crossref
Gianluca D’Urso, Claudio Giardini, Mariangela Quarto & Giancarlo Maccarini. (2017) Cost Index Model for the Process Performance Optimization of Micro-EDM Drilling on Tungsten Carbide. Micromachines 8:8, pages 251.
Crossref
Crossref
C K Nirala & P Saha. (2016) Toward development of a new online tool wear compensation strategy in micro-electro-discharge machining drilling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:4, pages 588-599.
Crossref
Crossref
Vijay Kumar Meena, Man Singh Azad, Suman Singh & Narinder Singh. (2016) Micro-EDM multiple parameter optimization for Cp titanium. The International Journal of Advanced Manufacturing Technology 89:1-4, pages 897-904.
Crossref
Crossref
Goutam Kumar Bose, Pritam Pain & Sayak Mukhopadhyay. 2017. Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics. Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics
111
129
.
H.R. Gurupavan, T.M. Devegowda, H.V. Ravindra & G. Ugrasen. (2017) Estimation of Machining Performances in WEDM of Aluminium based Metal Matrix Composite Material using ANN. Materials Today: Proceedings 4:9, pages 10035-10038.
Crossref
Crossref
Raju B. Bhosle & S.B. Sharma. (2017) Multi-performance optimization of micro-EDM drilling process of Inconel 600 alloy. Materials Today: Proceedings 4:2, pages 1988-1997.
Crossref
Crossref
Vishwa R. Surya, K.M. Vinay Kumar, R. Keshavamurthy, G. Ugrasen & HV. Ravindra. (2017) Prediction of Machining Characteristics using Artificial Neural Network in Wire EDM of Al7075 based In-situ Composite. Materials Today: Proceedings 4:2, pages 203-212.
Crossref
Crossref
M.Y. Ali & W.N.P. Hung. 2017. Comprehensive Materials Finishing. Comprehensive Materials Finishing
322
343
.
Chinmaya P. Mohanty, Siba Sankar Mahapatra & Manas Ranjan Singh. (2014) A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing 27:6, pages 1171-1190.
Crossref
Crossref
I. Ghamarian, B. Hayes, P. Samimi, B.A. Welk, H.L. Fraser & P.C. Collins. (2016) Developing a phenomenological equation to predict yield strength from composition and microstructure in β processed Ti-6Al-4V. Materials Science and Engineering: A 660, pages 172-180.
Crossref
Crossref
Wuyi Ming, Jun Ma, Zhen Zhang, Hao Huang, Dili Shen, Guojun Zhang & Yu Huang. (2016) Soft computing models and intelligent optimization system in electro-discharge machining of SiC/Al composites. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Rajiv Kumar Sharma & Jagdeep Singh. (2014) Determination of multi-performance characteristics for powder mixed electric discharge machining of tungsten carbide alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230:2, pages 303-312.
Crossref
Crossref
Apurba Kumar Roy, Supriyo Roy & Kaushik Kumar. 2016. Handbook of Research on Military, Aeronautical, and Maritime Logistics and Operations. Handbook of Research on Military, Aeronautical, and Maritime Logistics and Operations
470
508
.
R. Manivannan & M. Pradeep Kumar. (2016) Multi-response optimization of Micro-EDM process parameters on AISI304 steel using TOPSIS. Journal of Mechanical Science and Technology 30:1, pages 137-144.
Crossref
Crossref
Ravindranadh Bobbili, V. Madhu & A.K. Gogia. (2015) Multi response optimization of wire-EDM process parameters of ballistic grade aluminium alloy. Engineering Science and Technology, an International Journal 18:4, pages 720-726.
Crossref
Crossref
Ravindranadh Bobbili, V. Madhu & A.K. Gogia. (2015) Modelling and analysis of material removal rate and surface roughness in wire-cut EDM of armour materials. Engineering Science and Technology, an International Journal 18:4, pages 664-668.
Crossref
Crossref
Ravindranadh Bobbili, V. Madhu & A.K. Gogia. (2015) An experimental investigation of wire electrical discharge machining of hot-pressed boron carbide. Defence Technology 11:4, pages 344-349.
Crossref
Crossref
YuHong Long, QingYuan Liu, ZhiXian Zhong, LiangCai Xiong & TieLin Shi. (2015) Experimental study on the processes of laser-enhanced electrochemical micromachining stainless steel. Optik - International Journal for Light and Electron Optics 126:19, pages 1826-1829.
Crossref
Crossref
Kuldip Singh Sangwan, Sachin Saxena & Girish Kant. (2015) Optimization of Machining Parameters to Minimize Surface Roughness using Integrated ANN-GA Approach. Procedia CIRP 29, pages 305-310.
Crossref
Crossref
T. Muthuramalingam & B. Mohan. (2014) Application of Taguchi-grey multi responses optimization on process parameters in electro erosion. Measurement 58, pages 495-502.
Crossref
Crossref
P. Sivaprakasam, P. Hariharan & S. Gowri. (2014) Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach. Engineering Science and Technology, an International Journal 17:4, pages 227-235.
Crossref
Crossref
R. Venkata Rao & V. D. Kalyankar. (2014) Optimization of modern machining processes using advanced optimization techniques: a review. The International Journal of Advanced Manufacturing Technology 73:5-8, pages 1159-1188.
Crossref
Crossref
Pankaj K Shrivastava & Avanish K Dubey. (2013) Electrical discharge machining–based hybrid machining processes: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:6, pages 799-825.
Crossref
Crossref
Kapil Gupta & Neelesh K Jain. (2013) Analysis and optimization of surface finish of wire electrical discharge machined miniature gears. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:5, pages 673-681.
Crossref
Crossref
C.K. Nirala, G. Gupta, A. Agrawal & P. Saha. (2014) Development of a New Pulse Discriminating System for Micro Electro Discharge Machining (μEDM). Applied Mechanics and Materials 541-542, pages 430-435.
Crossref
Crossref
Sambhrant Srivastava, Apurba Kumar Roy & Kaushik Kumar. (2014) Design analysis of Mixed Flow Pump Impeller Blades Using ANSYS and Prediction of its Parameters using Artificial Neural Network. Procedia Engineering 97, pages 2022-2031.
Crossref
Crossref
Jana D. Abou Ziki & Rolf Wüthrich. (2013) Forces exerted on the tool-electrode during constant-feed glass micro-drilling by spark assisted chemical engraving. International Journal of Machine Tools and Manufacture 73, pages 47-54.
Crossref
Crossref
Rajiv Kumar Garg & Kuldeep Ojha. (2013) Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Triangular Electrodes. Advanced Materials Research 816-817, pages 23-27.
Crossref
Crossref
Mustafa Ay, Ulaş Çaydaş & Ahmet Hasçalık. (2012) Optimization of micro-EDM drilling of inconel 718 superalloy. The International Journal of Advanced Manufacturing Technology 66:5-8, pages 1015-1023.
Crossref
Crossref
C.K. Nirala, B. Reddy & P. Saha. (2012) Optimization of Process Parameters in Micro Electro- Discharge Drilling [micro EDM-Drilling]: A Taguchi Approach. Advanced Materials Research 622-623, pages 30-34.
Crossref
Crossref
K. P. Somashekhar, Jose Mathew & N. Ramachandran. (2012) A feasibility approach by simulated annealing on optimization of micro-wire electric discharge machining parameters. The International Journal of Advanced Manufacturing Technology 61:9-12, pages 1209-1213.
Crossref
Crossref
SOUMYAKANT PADHEE, NIHARRANJAN NAYAK, S K PANDA, P R DHAL & S S MAHAPATRA. (2012) Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Sadhana 37:2, pages 223-240.
Crossref
Crossref
Rajiv Kumar Garg & Kuldeep Ojha. (2011) Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Minimum Surface Roughness and Maximum MRR. Advanced Materials Research 383-390, pages 3202-3206.
Crossref
Crossref
K P Somashekhar, J Mathew & N Ramachandran. (2011) Multi-objective optimization of micro wire electric discharge machining parameters using grey relational analysis with Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225:7, pages 1742-1753.
Crossref
Crossref