Citations (65)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
Muhsin Ahmad Khan, Ravi Butola & Nirman Gupta. (2023) A review of nanoparticle reinforced surface composites processed by friction stir processing. Journal of Adhesion Science and Technology 37:4, pages 565-601.
Read now
Read now
Suhail Ahmed, Manroo, Vinayak Malik & Babar Ahmad. (2022) Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review. Advances in Materials and Processing Technologies 8:4, pages 3635-3655.
Read now
Read now
Abhishek Sharma, Vyas Mani Sharma, Sanchit Mewar, Surjya Kanta Pal & Jinu Paul. (2018) Friction stir processing of Al6061-SiC-graphite hybrid surface composites. Materials and Manufacturing Processes 33:7, pages 795-804.
Read now
Read now
Prakash Kumar Sahu & Sukhomay Pal. (2018) Effect of FSW parameters on microstructure and mechanical properties of AM20 welds. Materials and Manufacturing Processes 33:3, pages 288-298.
Read now
Read now
Xiaobo Zhang, Jing Sun, Cong Zhou, Yijie Zhang, Naiheng Ma & Haowei Wang. (2014) Improvement of Grain Refinement Efficiency in Pure Aluminum by Embryos Proliferation. Materials and Manufacturing Processes 29:7, pages 826-831.
Read now
Read now
Bo Li, Yifu Shen, Luo Lei & Weiye Hu. (2014) Fabrication and Evaluation of Ti3Alp/Ti–6Al–4V Surface Layer via Additive Friction-Stir Processing. Materials and Manufacturing Processes 29:4, pages 412-417.
Read now
Read now
Bo Li, Yifu Shen & Weiye Hu. (2014) Friction-Stir Nitriding of Titanium Alloy Surface Layer. Materials and Manufacturing Processes 29:4, pages 493-497.
Read now
Read now
Ren-Guo Guan, Zhan-Yong Zhao, Chun-Guang Dai, Chong
Soo Lee & Chun-Ming Liu. (2013) A Novel Semisolid Rheo-Rolling Process of AZ31 Alloy with Vibrating Sloping Plate. Materials and Manufacturing Processes 28:3, pages 299-305.
Read now
Read now
Hassan Jafari, Mohd
Hasbullah Idris, Ali Ourdjini & Mohammed
Rafiq Abdul Kadir. (2013) Influence of Flux on Melting Characteristics and Surface Quality of In-Situ Melting AZ91D. Materials and Manufacturing Processes 28:2, pages 148-153.
Read now
Read now
Chang
Ping Tang, Liu Yang, Di Feng, Yun
Lai Deng & Xin
Ming Zhang. (2012) Investigation on Microstructure and Mechanical Properties of a Mg-Gd-Y-Zr Alloy Plate. Materials and Manufacturing Processes 27:6, pages 609-613.
Read now
Read now
Ghader Faraji, Mahmoud
Mosavi Mashhadi & Hyoung
Seop Kim. (2012) Microstructural Evolution of UFG Magnesium Alloy Produced by Accumulative Back Extrusion (ABE). Materials and Manufacturing Processes 27:3, pages 267-272.
Read now
Read now
Articles from other publishers (54)
Rahul Das, Sanjeev Kumar, Jitendra Kumar Katiyar, Smrity Choudhury & Barnik Saha Roy. (2023) State-of-the-art on microstructural, mechanical and tribological properties of friction stir processed aluminium 2xxx series alloy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
A. Gnanavelbabu, E. Vinothkumar, Nimel Sworna Ross, Munish Kumar Gupta & Muhammad Jamil. (2023) Tribo-corrosive wear and mechanical properties of nanoparticles reinforced Mg-AZ91D composites. Tribology International 178, pages 108054.
Crossref
Crossref
A. Tajdeen, A. Megalingam, M. Sivanesh Prabhu & M. Wasim Khan. (2023) Role of Tungsten Disulfide Particles on the Microstructure, Mechanical, and Tribological Behaviors of Friction Stir-Processed Magnesium-Based Composite. Journal of Tribology 145:1.
Crossref
Crossref
Suhail Ahmed Manroo, Noor Zaman Khan & Babar Ahmad. (2022) Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review. Journal of Engineering and Applied Science 69:1.
Crossref
Crossref
S. GOBIKANNAN, S. GOPALAKANNAN & P. SIVARAJ. (2022) MULTI-RESPONSE OPTIMIZATION AND INVESTIGATION OF DRY SLIDING WEAR BEHAVIOR OF Al7075 SURFACE HYBRID NANOCOMPOSITE USING RESPONSE SURFACE METHODOLOGY. Surface Review and Letters 29:10.
Crossref
Crossref
S Gobikannan, S Gopalakannan & P Balasubramanian. (2022)
Optimization and effect of B
4
C/Al
2
O
3
with graphite particulates on tribological properties of Al7075 surface hybrid nanocomposite
. Surface Topography: Metrology and Properties 10:3, pages 035005.
Crossref
Crossref
Prem Sagar, Amit Handa & Gitesh Kumar. (2021) Metallurgical, mechanical and tribological behavior of Reinforced magnesium-based composite developed Via Friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:4, pages 1440-1451.
Crossref
Crossref
Ke Qiao, Ting Zhang, Kuaishe Wang, Shengnan Yuan, Liqiang Wang, Shanyong Chen, Yuhao Wang, Kairui Xue & Wen Wang. (2022) Effect of multi-pass friction stir processing on the microstructure evolution and corrosion behavior of ZrO2/AZ31 magnesium matrix composite. Journal of Materials Research and Technology 18, pages 1166-1179.
Crossref
Crossref
Said H. Zoalfakar, Mostafa A. Mohamed, M. Abdel Hamid & A. A. Megahed. (2022) Effect of friction stir processing parameters on producing AA6061/ tungsten carbide nanocomposite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210835.
Crossref
Crossref
Behrouz Bagheri, Amin Abdollahzadeh, Farzaneh Sharifi & Mahmoud Abbasi. (2021) The role of vibration and pass number on microstructure and mechanical properties of AZ91/SiC composite layer during friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:5, pages 2312-2326.
Crossref
Crossref
Abhishek Sharma, Tanmoy Das & Jinu Paul. (2021) Performance evaluation of Al6061-graphene nanocomposites surface engineered by a novel multiple microchannel reinforcement approach in friction stir processing. Carbon Letters 31:6, pages 1111-1124.
Crossref
Crossref
. (2021) Challenges and Solutions for Fabrication of Magnesium-Based Composites by Friction Stir Processing Technique. Nanosistemi, Nanomateriali, Nanotehnologii 19:3.
Crossref
Crossref
Song-Jeng Huang, Murugan Subramani, Addisu Negash Ali, Dawit Bogale Alemayehu, Jong-Ning Aoh & Pai-Chen Lin. (2020) The Effect of Micro-SiCp Content on the Tensile and Fatigue Behavior of AZ61 Magnesium Alloy Matrix Composites. International Journal of Metalcasting 15:3, pages 780-793.
Crossref
Crossref
P. Sagar & A. Handa. (2021) Selection of tool transverse speed considering trial run experimentations for AZ61/Tic composite developed via friction stir processing using triangular tool. Materials Today: Proceedings 38, pages 198-203.
Crossref
Crossref
MohammadHosein Mirzaei, Parviz Asadi & Ali Fazli. (2020) Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy. International Journal of Mechanical Sciences 183, pages 105775.
Crossref
Crossref
Behrouz Bagheri, Mahmoud Abbasi, Amin Abdollahzadeh & Amir Hossein Kokabi. (2020) A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites. International Journal of Minerals, Metallurgy and Materials 27:8, pages 1133-1146.
Crossref
Crossref
P. Sagar & A. Handa. (2020) A comprehensive review of recent progress in fabrication of magnesium base composites by friction stir processing technique—A review. AIMS Materials Science 7:5, pages 684-704.
Crossref
Crossref
Wen Wang, Peng Han, Pai Peng, Ting Zhang, Qiang Liu, Sheng-Nan Yuan, Li-Ying Huang, Hai-Liang Yu, Ke Qiao & Kuai-She Wang. (2019) Friction Stir Processing of Magnesium Alloys: A Review. Acta Metallurgica Sinica (English Letters) 33:1, pages 43-57.
Crossref
Crossref
Recep Catar & Hikmet Altun. (2019) Investigation of Stress Corrosion Cracking Behaviour of Mg-Al-Zn Alloys in Different pH Environments by SSRT Method. Open Chemistry 17:1, pages 972-979.
Crossref
Crossref
Parisa Zolghadr, Mostafa Akbari & Parviz Asadi. (2019) Formation of thermo-mechanically affected zone in friction stir welding. Materials Research Express 6:8, pages 086558.
Crossref
Crossref
Manu Khare, R. K. Gupta, S. S. Ghosh & Bhuvnesh Bhardwaj. Effect of reinforcements (B4C & Al2O3) and rotational speed on tribological properties of aluminum alloy 7075 hybrid composites through friction stir processing. Effect of reinforcements (B4C & Al2O3) and rotational speed on tribological properties of aluminum alloy 7075 hybrid composites through friction stir processing.
Nitin Saini, Chandan Pandey & Dheerendra Kumar Dwivedi. (2017) Ductilizing of cast hypereutectic Al–17%Si alloy by friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 232:6, pages 696-701.
Crossref
Crossref
Dingqiang Qin, Haorui Shen, Zhikang Shen, Haiyan Chen & Li Fu. (2018) Manufacture of biodegradable magnesium alloy by high speed friction stir processing. Journal of Manufacturing Processes 36, pages 22-32.
Crossref
Crossref
A H Adibpour, I Ebrahimzadeh & F Gharavi. (2018) Microstructural and tribological properties of A356 based surface hybrid composite produced by friction stir processing. Materials Research Express 6:1, pages 016501.
Crossref
Crossref
Sankar Ramaiyan, Senthil Kumar Velukkudi Santhanam & Puviyarasan Muthuguru. (2018) Effect of Scroll Pin Profile and Tool Rotational Speed on Mechanical Properties of Submerged Friction Stir Processed AZ31B Magnesium Alloy. Materials Research 21:3.
Crossref
Crossref
Rajiv Chaudhary, Sumit Joshi & Ramesh Chandra Singh. (2018) Mechanical and wear performance of surface composite fabricated by solid-state technique-a review. Materials Today: Proceedings 5:14, pages 28033-28042.
Crossref
Crossref
V. Kishan, Aruri Devaraju & K. Prasanna Lakshmi. (2018) Tribological Properties of Nano TiB2 particle Reinforced 6061-T6 Aluminum Alloy Surface Composites via Friction stir processing. Materials Today: Proceedings 5:1, pages 1615-1619.
Crossref
Crossref
Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong, Doo-Man Chun & Heung Nam Han. (2018) Joining and fabrication of metal matrix composites by friction stir welding/processing. International Journal of Precision Engineering and Manufacturing-Green Technology 5:1, pages 151-172.
Crossref
Crossref
A. Fata, G. Faraji, M. M. Mashhadi & H. Abdolvand. (2016) Evaluation of Hot Tensile Behavior of Fine-Grained Mg–9Al–1Zn Alloy Tube Processed by Severe Plastic Deformation. Transactions of the Indian Institute of Metals 70:5, pages 1369-1376.
Crossref
Crossref
V. Kishan, Aruri Devaraju & K. Prasanna Lakshmi. (2017) Influence of volume percentage of NanoTiB 2 particles on tribological & mechanical behaviour of 6061-T6 Al alloy nano-surface composite layer prepared via friction stir process. Defence Technology 13:1, pages 16-21.
Crossref
Crossref
V. Kishan & Aruri Devaraju. (2017) Preparation of nano surface layer composite (TiB 2 ) p on 6061-T6 Aluminum Alloy via Friction Stir Processing. Materials Today: Proceedings 4:2, pages 4065-4069.
Crossref
Crossref
Y.S. Kim & W.J. Kim. (2016) Microstructure and superplasticity of the as-cast Mg–9Al–1Zn magnesium alloy after high-ratio differential speed rolling. Materials Science and Engineering: A 677, pages 332-339.
Crossref
Crossref
Mohammad Ali Ansari, Reza Abdi Behnagh, Morteza Narvan, Emadoddin Sadeqzadeh Naeini, Mohammad Kazem Besharati Givi & Hongtao Ding. (2015) Optimization of Friction Stir Extrusion (FSE) Parameters Through Taguchi Technique. Transactions of the Indian Institute of Metals 69:7, pages 1351-1357.
Crossref
Crossref
Vivek Bajpai, Bablu Prasad & Ramesh Singh. (2016) Fabrication and functional characterization of engineered features on pyrolytic carbon. Advances in Manufacturing 4:2, pages 134-141.
Crossref
Crossref
Reza Abdi Behnagh, Ninggang Shen, Mohammad Ali Ansari, Morteza Narvan, Mohammad Kazem Besharati Givi & Hongtao Ding. (2016) Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips. Journal of Manufacturing Science and Engineering 138:4.
Crossref
Crossref
Morteza Narvan, Reza Abdi Behnagh, Ninggang Shen, Mohammad Kazem Besharati Givi & Hongtao Ding. (2016) Shear compaction processing of SiC nanoparticles reinforced magnesium composites directly from magnesium chips. Journal of Manufacturing Processes 22, pages 39-48.
Crossref
Crossref
B. Ratna Sunil, G. Pradeep Kumar Reddy, Hemendra Patle & Ravikumar Dumpala. (2016) Magnesium based surface metal matrix composites by friction stir processing. Journal of Magnesium and Alloys 4:1, pages 52-61.
Crossref
Crossref
Mehdi Saeidi, Reza Abdi Behnagh, Babak Manafi, Mohsen Farahmand Nikoo & Mohammad Kazem Besharati Givi. (2015) Study on ultrafine-grained aluminum matrix nanocomposite joint fabricated by friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230:1, pages 311-318.
Crossref
Crossref
Parviz Asadi, Mostafa Akbari, Mohammad Kazem Besharati Givi & Masoud Shariat Panahi. (2015) Optimization of AZ91 friction stir welding parameters using Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230:1, pages 291-302.
Crossref
Crossref
Ashraf A. Ali, M. A. H. El-Meniawi & S. M. Khafagi. (2014) A novel Bi-processing technique for metal matrix nanocomposites. The International Journal of Advanced Manufacturing Technology 78:5-8, pages 907-915.
Crossref
Crossref
Bakthavachalu Balamugundan & Loganathan Karthikeyan. (2014) Optimization of Process Parameters during Milling of Friction Stir Processed GFRP Composites. Advanced Materials Research 984-985, pages 297-303.
Crossref
Crossref
A. Heidarzadeh, K. Kazemi-Choobi, H. Hanifian & P. Asadi. 2014. Advances in Friction-Stir Welding and Processing. Advances in Friction-Stir Welding and Processing
65
140
.
M.K. Besharati Givi & P. Asadi. 2014. Advances in Friction-Stir Welding and Processing. Advances in Friction-Stir Welding and Processing
1
19
.
Avvari Muralidhar, S. Narendranath & H. Shivananda Nayaka. (2013) Effect of equal channel angular pressing on AZ31 wrought magnesium alloys. Journal of Magnesium and Alloys 1:4, pages 336-340.
Crossref
Crossref
A. Devaraju, A. Kumar, A. Kumaraswamy & B. Kotiveerachari. (2013) Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing. Materials & Design 51, pages 331-341.
Crossref
Crossref
Devaraju Aruri, Kumar Adepu, Kumaraswamy Adepu & Kotiveerachari Bazavada. (2013) Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing. Journal of Materials Research and Technology 2:4, pages 362-369.
Crossref
Crossref
A. DEVARAJU, A. KUMAR & B. KOTIVEERACHARI. (2013) Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing. Transactions of Nonferrous Metals Society of China 23:5, pages 1275-1280.
Crossref
Crossref
A. Devaraju, A. Kumar & B. Kotiveerachari. (2013) Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing. Materials & Design 45, pages 576-585.
Crossref
Crossref
Fang Chai, Da Tong Zhang, Wen Zhang & Cheng Qiu. (2013) Effect of Processing Speed on Microstructures and Mechanical Properties of Submerged Friction Stir Processed AZ91 Alloy. Materials Science Forum 747-748, pages 276-281.
Crossref
Crossref
P. Asadi, M. K. Besharati Givi, A. Rastgoo, M. Akbari, V. Zakeri & S. Rasouli. (2012) Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks. The International Journal of Advanced Manufacturing Technology 63:9-12, pages 1095-1107.
Crossref
Crossref
Mehdi Zohoor, M.K. Besharati Givi & P. Salami. (2012) Effect of processing parameters on fabrication of Al–Mg/Cu composites via friction stir processing. Materials & Design 39, pages 358-365.
Crossref
Crossref
G. Faraji, H. Jafarzadeh, H.J. Jeong, M.M. Mashhadi & H.S. Kim. (2012) Numerical and experimental investigation of the deformation behavior during the accumulative back extrusion of an AZ91 magnesium alloy. Materials & Design 35, pages 251-258.
Crossref
Crossref
P. Asadi, G. Faraji, A. Masoumi & M. K. Besharati Givi. (2011) Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes. Metallurgical and Materials Transactions A 42:9, pages 2820-2832.
Crossref
Crossref
P. Asadi, R.A. Mahdavinejad & S. Tutunchilar. (2011) Simulation and experimental investigation of FSP of AZ91 magnesium alloy. Materials Science and Engineering: A 528:21, pages 6469-6477.
Crossref
Crossref