Citations (23)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Amitabh Shrivastava, Amit Telang, A.K. Jha & Meraj Ahmed. (2019) Experimental and numerical study on the influence of process parameters in electromagnetic compression of AA6061 tube. Materials and Manufacturing Processes 34:13, pages 1537-1548.
Read now
Read now
Krishnaswamy Hariharan, Ngoc-Trung Nguyen, Nirupam Chakraborti, Frédéric Barlat & Myoung-Gyu Lee. (2015) Determination of Anisotropic Yield Coefficients by a Data-Driven Multiobjective Evolutionary and Genetic Algorithm. Materials and Manufacturing Processes 30:4, pages 403-413.
Read now
Read now
Yanle Li, Zhaobing Liu, W.J.T.(Bill) Daniel & P.A. Meehan. (2014) Simulation and Experimental Observations of Effect of Different Contact Interfaces on the Incremental Sheet Forming Process. Materials and Manufacturing Processes 29:2, pages 121-128.
Read now
Read now
Articles from other publishers (20)
Hangyu Wu & Haiyan Yu. (2023) A constitutive model for cracking prediction of steel/aluminum thin-walled tubes during plastic joining. The International Journal of Advanced Manufacturing Technology 127:5-6, pages 2357-2370.
Crossref
Crossref
Jong Bok Byun, Chang Woon Jee, Kwang Hee Lee & Man Soo Joun. (2023) General Blending Approach of Fundamental Cold Flow Models for an Almost Complete Cold Flow Model in Terms of Tensile Test. steel research international.
Crossref
Crossref
Luigi Tricarico & Maria Emanuela Palmieri. (2023) Robust Design of Deep Drawing Process through In-Line Feedback Control of the Draw-In. Applied Sciences 13:3, pages 1717.
Crossref
Crossref
Chang Woon Jee, Su Min Ji, Jong Bok Byun & Man Soo Joun. (2022) Practical Blended Flow Models for Bulk Metal Forming Using the Cylindrical Tensile Test with Its Related Flow Behavior at Large Strain. Journal of the Korean Society for Precision Engineering 39:8, pages 583-593.
Crossref
Crossref
Alexander Wolf, Niklas Küsters, Sven Bräunling, Daniel Weck, Kristina Kittner, Maik Gude, Ulrich Prahl & Alexander Brosius. (2022) Modeling metal forming of a magnesium alloy using an adapted material model. Engineering Reports 4:7-8.
Crossref
Crossref
Man-Soo Joun, Mohd Kaswandee Razali, Chang-Woon Jee, Jong-Bok Byun, Min-Cheol Kim & Kwang-Min Kim. (2022) A Review of Flow Characterization of Metallic Materials in the Cold Forming Temperature Range and Its Major Issues. Materials 15:8, pages 2751.
Crossref
Crossref
Shin-Yeong Lee, Seong-Yong Yoon, Jin-Hwan Kim & Frédéric Barlat. (2020) Calibration of Distortional Plasticity Framework and Application to U-draw Bending Simulations. ISIJ International 60:12, pages 2927-2941.
Crossref
Crossref
Alexander Barlo, Mats Sigvant & Benny Endelt. (2019) On the Failure Prediction of Dual-Phase Steel and Aluminium Alloys Exposed to Combined Tension and Bending. IOP Conference Series: Materials Science and Engineering 651:1, pages 012030.
Crossref
Crossref
Gabriel Venet, Tudor Balan, Cyrille Baudouin & Régis Bigot. (2018) Direct usage of the wire drawing process for large strain parameter identification. International Journal of Material Forming 12:5, pages 875-888.
Crossref
Crossref
Hamzah Alharthi, Sumit Hazra, Abdulrahman Alghamdi, Dorel Banabic & Richard Dashwood. (2018) Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1307-1319.
Crossref
Crossref
Quoc-Tuan Pham, Bong-Hyun Lee, Kee-Cheol Park & Young-Suk Kim. (2018) Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets. International Journal of Mechanical Sciences 140, pages 521-536.
Crossref
Crossref
Dorel Banabic. (2016) Advances in Plastic Anisotropy and Forming Limits in Sheet Metal Forming. Journal of Manufacturing Science and Engineering 138:9.
Crossref
Crossref
Alexander Brosius & Dorel Banabic. 2017. CIRP Encyclopedia of Production Engineering. CIRP Encyclopedia of Production Engineering
1
8
.
Alexander Kahrimanidis, Michael Lechner, Julia Degner, Daniel Wortberg & Marion Merklein. (2015) Process Design of Aluminum Tailor Heat Treated Blanks. Materials 8:12, pages 8524-8538.
Crossref
Crossref
Fang Peng, Xianghuai Dong, Xiyang Tian, Huanyang Xie & Kai Liu. (2015) An interpolation-type orthotropic yield function and its application under biaxial tension. International Journal of Mechanical Sciences 99, pages 89-97.
Crossref
Crossref
Dorel Banabic. 2015. Blechumformung. Blechumformung
309
322
.
Marion Merklein, Sebastian Suttner & Alexander Brosius. (2014) Characterisation of kinematic hardening and yield surface evolution from uniaxial to biaxial tension with continuous strain path change. CIRP Annals 63:1, pages 297-300.
Crossref
Crossref
Lucian Lazarescu, Ioan Ciobanu, Ioan Pavel Nicodim, Dan Sorin Comsa & Dorel Banabic. (2013) Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes. Key Engineering Materials 554-557, pages 204-209.
Crossref
Crossref
Liana Paraianu & Dorel Banabic. (2013) Characterization of the Plastic Behaviour of AA6016-T4 Aluminium Alloy. Advanced Engineering Forum 8-9, pages 293-300.
Crossref
Crossref
Lucian Lazarescu & Dorel Banabic. (2013) Influence of Material Property Variability on the Thickness in Sheet Metal Subjected to the Hydraulic Bulging. Advanced Engineering Forum 8-9, pages 251-258.
Crossref
Crossref