Citations (41)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Gökhan Özer, Burçin Özbay, Zafer Çağatay Öter, Gürkan Tarakçi, Mustafa Safa Yılmaz, Mustafa Enes Bulduk, Ebubekir Koç, Serhat Acar & Kerem Altuğ Güler. (2020) Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC). International Journal of Cast Metals Research 33:2-3, pages 146-152.
Read now
Read now
Munish Kumar Gupta, P. K. Sood & Vishal S. Sharma. (2016) Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment. Materials and Manufacturing Processes 31:13, pages 1671-1682.
Read now
Read now
S. Singh, V. S. Sharma & A. Sachdeva. (2016) Progress in selective laser sintering using metallic powders: a review. Materials Science and Technology 32:8, pages 760-772.
Read now
Read now
Shyh-Yuan Lee & Cho-Pei Jiang. (2015) Development of a Three-Dimensional Slurry Printing System Using Dynamic Mask Projection for Fabricating Zirconia Dental Implants. Materials and Manufacturing Processes 30:12, pages 1498-1504.
Read now
Read now
Sharanjit Singh, VishalS. Sharma, Anish Sachdeva & S.K. Sinha. (2013) Optimization and Analysis of Mechanical Properties for Selective Laser Sintered Polyamide Parts. Materials and Manufacturing Processes 28:2, pages 163-172.
Read now
Read now
Articles from other publishers (36)
Flaviana Calignano, Alessandro Bove, Vincenza Mercurio & Giovanni Marchiandi. (2023) Effect of recycled powder and gear profile into the functionality of additive manufacturing polymer gears. Rapid Prototyping Journal.
Crossref
Crossref
Yong Hu, Yudong Lin, Lei Yang, Siqi Wu, DianYu Tang, Chunze Yan & Yusheng Shi. (2023) Additive Manufacturing of Carbon Fiber-reinforced Composites: A Review. Applied Composite Materials.
Crossref
Crossref
Urvashi F. Gunputh, Gavin Williams, Marzena Pawlik, Yiling Lu & Paul Wood. (2023) Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11. Polymers 15:23, pages 4602.
Crossref
Crossref
Rupalin Biswal & Arumaikkannu Ganesan. (2023) Experimental investigation of design parameters on geometrical accuracy of selective laser sintered parts. Journal of Manufacturing Processes 108, pages 48-61.
Crossref
Crossref
Rajinth Shanthar, Kun Chen & Chamil Abeykoon. (2023) Powder‐Based Additive Manufacturing: A Critical Review of Materials, Methods, Opportunities, and Challenges. Advanced Engineering Materials.
Crossref
Crossref
F.E. Jabri, A. Ouballouch, L. Lasri & R. El Alaiji. (2023) A comprehensive review of polymer materials and selective laser sintering technology for 3D printing. Journal of Achievements in Materials and Manufacturing Engineering 118:1, pages 5-17.
Crossref
Crossref
Davis J. McGregor, Miles V. Bimrose, Chenhui Shao, Sameh Tawfick & William P. King. (2022) Using machine learning to predict dimensions and qualify diverse part designs across multiple additive machines and materials. Additive Manufacturing 55, pages 102848.
Crossref
Crossref
Vishal Sharma, Jaiinderpreet Singh, Vishal S. Sharma, Anish Sachdeva, Munish Kumar Gupta & Sharanjit Singh. (2022) Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process. Journal of Materials Engineering and Performance 31:7, pages 5767-5781.
Crossref
Crossref
Yongbiao Wang, Cong Chen, Xintian Liu, Jiaxin Wang, Yang Zhang, Weimin Long, Shaokang Guan & Liming Peng. (2022) Cross-Scale Simulation Research on the Macro/Microstructure of TC4 Alloy Wire Laser Additive Manufacturing. Metals 12:6, pages 934.
Crossref
Crossref
P. Ashwath, M. Anthony Xavior, P. Jeyapandiarajan, J. Joel & Andre Batako. (2022) Surface Finish and Property Evaluation of Direct Metal Laser Sintered (DMLS) Al-Si-10Mg alloy. Journal of Physics: Conference Series 2198:1, pages 012055.
Crossref
Crossref
Xiaozhu Wen, Cheng Guo, Xiaobang Shang, Yang Yu, Minjie Shu, Qian Yang, Sheng Li, Moataz M. Attallah, Hongzhong Liu & Anxue Zhang. (2021) SLM Printed Waveguide Dual-Mode Filters With Reduced Sensitivity to Fabrication Imperfections. IEEE Microwave and Wireless Components Letters 31:11, pages 1195-1198.
Crossref
Crossref
Cheng Guo, Yang Yu, Sheng Li, Xiaozhu Wen, Anxue Zhang, Yi Wang & Moataz Attallah. (2021) Monolithic 3D printed waveguide filters with wide spurious‐free stopbands using dimpled spherical resonators. IET Microwaves, Antennas & Propagation 15:12, pages 1657-1670.
Crossref
Crossref
Shaoying Li, Shangqin Yuan, Jihong Zhu, Weihong Zhang, Han Zhang & Jiang Li. (2021) Multidisciplinary topology optimization incorporating process-structure-property-performance relationship of additive manufacturing. Structural and Multidisciplinary Optimization 63:5, pages 2141-2157.
Crossref
Crossref
Vishal Sharma, Ramesh Chand, Vishal S Sharma, Anish Sachdeva & Sharanjit Singh. (2021) Investigating Shrinkage: CAD, Thermal and Volumetric for Selective Laser Sintering of Polyamide Parts. Lasers in Manufacturing and Materials Processing 8:1, pages 73-96.
Crossref
Crossref
Mohammed Abdul Imran, Kranthi Kumar Singam, S.P. Jani & Sudhakar Uppalapati. (2021) Mechanical properties of carbon particle mixed polylactic acid via fused deposition modeling. Materials Today: Proceedings 46, pages 8590-8593.
Crossref
Crossref
Hasan Bakheet Jasim & Basim Abdulkareem Farhan. (2021) Practical analysis of direct metal laser sintering process. Materials Today: Proceedings 45, pages 5469-5475.
Crossref
Crossref
Ivanna Baturynska & Kristian Martinsen. (2020) Prediction of geometry deviations in additive manufactured parts: comparison of linear regression with machine learning algorithms. Journal of Intelligent Manufacturing 32:1, pages 179-200.
Crossref
Crossref
Shekhar Srivastava, Rajiv Kumar Garg, Vishal S. Sharma, Noe Gaudencio Alba-Baena, Anish Sachdeva, Ramesh Chand & Sehijpal Singh. (2020) Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review. Rapid Prototyping Journal 26:4, pages 737-764.
Crossref
Crossref
Karan Bharaj, Sourabh Paul, Kamran Aamir Mumtaz, Michael Chisholm & Neil Hopkinson. (2019) Fabricating poly(methyl methacrylate) parts using high-speed sintering. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:1-2, pages 118-125.
Crossref
Crossref
Xinpeng Gan, Guoxia Fei, Jinzhi Wang, Zhanhua Wang, Marino Lavorgna & Hesheng Xia. 2020. Structure and Properties of Additive Manufactured Polymer Components. Structure and Properties of Additive Manufactured Polymer Components
149
185
.
M. Hiren, M. E. Gajera, Komal G. Dave & Veera P. Jani. (2019) Experimental investigation and analysis of dimensional accuracy of laser-based powder bed fusion made specimen by application of response surface methodology. Progress in Additive Manufacturing 4:4, pages 371-382.
Crossref
Crossref
Yadunund VijayNaresh D. SanandiyaStylianos DritsasJavier G. Fernandez. (2019) Control of Process Settings for Large-Scale Additive Manufacturing With Sustainable Natural Composites. Journal of Mechanical Design 141:8.
Crossref
Crossref
Zhi Zeng, Xiaohu Deng, Jiangmei Cui, Hai Jiang, Shuo Yan & Bei Peng. (2019) Improvement on Selective Laser Sintering and Post-Processing of Polystyrene. Polymers 11:6, pages 956.
Crossref
Crossref
Camden A. Chatham, Timothy E. Long & Christopher B. Williams. (2019) A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Progress in Polymer Science 93, pages 68-95.
Crossref
Crossref
Jin Li, Sheng Li, Guan‐Long Huang, Tao Yuan & Moataz M. Attallah. (2019) Monolithic 3D‐printed slotted hemisphere resonator bandpass filter with extended spurious‐free stopband. Electronics Letters 55:6, pages 331-333.
Crossref
Crossref
Sharanjit Singh, Vishal S. Sharma & Anish Sachdeva. (2018) Application of response surface methodology to analyze the effect of selective laser sintering parameters on dimensional accuracy. Progress in Additive Manufacturing 4:1, pages 3-12.
Crossref
Crossref
Jin Li, Kai-Dong Hong & Tao Yuan. (2019) Slotted Hemispherical Resonators for 3-D Printed Waveguide Filters With Extended Spurious-Free Stopbands. IEEE Access 7, pages 130221-130235.
Crossref
Crossref
D Rajamani, Aiman Ziout, E Balasubramanian, R Velu, Salunkhe Sachin & Hussein Mohamed. (2018) Prediction and analysis of surface roughness in selective inhibition sintered high-density polyethylene parts: A parametric approach using response surface methodology–grey relational analysis. Advances in Mechanical Engineering 10:12, pages 168781401882099.
Crossref
Crossref
D. Rajamani, E. Balasubramanian, P. Arunkumar, M. Silambarasan & G. Bhuvaneshwaran. (2018) Experimental Investigations and Parametric Optimization of Process Parameters on Shrinkage Characteristics of Selective Inhibition Sintered High Density Polyethylene Parts. Experimental Techniques 42:6, pages 631-644.
Crossref
Crossref
Ivanna Baturynska. (2018) Statistical analysis of dimensional accuracy in additive manufacturing considering STL model properties. The International Journal of Advanced Manufacturing Technology 97:5-8, pages 2835-2849.
Crossref
Crossref
Hiren M. Gajera & Komal G. Dave. (2018) Experimental investigation and optimization of direct metal laser sintering process for shrinkage rate using CL50WS material. Materials Today: Proceedings 5:9, pages 19126-19135.
Crossref
Crossref
Ali Ahmadi Dastjerdi, Mohammad R. Movahhedy & Javad Akbari. (2017) Optimization of process parameters for reducing warpage in selected laser sintering of polymer parts. Additive Manufacturing 18, pages 285-294.
Crossref
Crossref
Sushant Negi & Rajesh Kumar Sharma. (2016) Study on shrinkage behaviour of laser sintered PA 3200GF specimens using RSM and ANN. Rapid Prototyping Journal 22:4, pages 645-659.
Crossref
Crossref
R. Venkata Rao & Dhiraj P. Rai. (2016) Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm. Engineering Science and Technology, an International Journal 19:1, pages 587-603.
Crossref
Crossref
M. N. Islam & Samuel Sacks. (2015) An experimental investigation into the dimensional error of powder-binder three-dimensional printing. The International Journal of Advanced Manufacturing Technology 82:5-8, pages 1371-1380.
Crossref
Crossref
Anish Sachdeva, Sharanjit Singh & Vishal S. Sharma. (2012) Investigating surface roughness of parts produced by SLS process. The International Journal of Advanced Manufacturing Technology 64:9-12, pages 1505-1516.
Crossref
Crossref