Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 27, 2012 - Issue 9
Submit an article Journal homepage
360
Views
29
CrossRef citations to date
0
Altmetric
Original Articles

Influence of Cutting Heat on Quality of Drilling of Carbon/Epoxy Composites

Wang Ben Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
,
Gao Hang Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, ChinaCorrespondence[email protected] ; [email protected]
,
Wen Quan Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
,
Wu Maoqing Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
&
Zhang Songpeng Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Pages 968-972 | Received 18 Apr 2011, Accepted 18 Jul 2011, Published online: 01 Aug 2012

Citations (29)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Jinyang Xu, Xianghui Huang, Ming Chen & J. Paulo Davim. (2020) Drilling characteristics of carbon/epoxy and carbon/polyimide composites. Materials and Manufacturing Processes 35:15, pages 1732-1740.
Read now
Jinyang Xu, Lei Zhou, Ming Chen & Fei Ren. (2019) Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. Materials and Manufacturing Processes 34:7, pages 715-725.
Read now
Ayesha Kausar, Wajid-Ullah, Bakhtiar Muhammad & Muhammad Siddiq. (2015) Influence of Processing Technique on the Physical Properties of Modified Polystyrene/Exfoliated Graphite Nanocomposites. Materials and Manufacturing Processes 30:3, pages 346-355.
Read now

Articles from other publishers (26)

. (2023) Overview of Electric Discharge Machining of MachineTooled Ceramics and Ceramic-Based Composites. REST Journal on Emerging trends in Modelling and Manufacturing 9:2, pages 9-16.
Crossref
Cristiano Devitte, André J. Souza & Heraldo J. Amorim. (2023) Impact of cooled compressed air and high-speed cutting on the drilling of hybrid composite-metal stacks. The International Journal of Advanced Manufacturing Technology 125:11-12, pages 5445-5461.
Crossref
Manoj Kumar Singh, Renu Tewari, Sunny Zafar, Sanjay Mavinkere Rangappa & Suchart Siengchin. (2023) A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites. Results in Materials 17, pages 100355.
Crossref
Praveenkumara Jagadeesh, Sanjay Mavinkere Rangappa, Indran Suyambulingam, Suchart Siengchin, Madhu Puttegowda, Joseph Selvi Binoj, Sergey Gorbatyuk, Anish Khan, Mrityunjay Doddamani, Vincenzo Fiore & Marta María Moure Cuadrado. (2023) Drilling characteristics and properties analysis of fiber reinforced polymer composites: A comprehensive review. Heliyon 9:3, pages e14428.
Crossref
Shweta Singh, Neha Yaragatti, Mrityunjay Doddamani, Satvasheel Powar & Sunny Zafar. (2022) Drilling parameter optimization of cenosphere/HDPE syntactic foam using CO2 laser. Journal of Manufacturing Processes 80, pages 28-42.
Crossref
Sagar Kubher, Suhasini Gururaja & Redouane Zitoune. (2022) Coupled thermo-mechanical modeling of drilling of multi-directional polymer matrix composite laminates. Composites Part A: Applied Science and Manufacturing 156, pages 106802.
Crossref
La Han, Junjie Zhang, Yuan Liu, Qiumei Gu & Zengqiang Li. (2021) Finite element investigation on pretreatment temperature-dependent orthogonal cutting of unidirectional CFRP. Composite Structures 278, pages 114678.
Crossref
Nícholas Hoffmann, Gabriel SC Souza, André J Souza & Volnei Tita. (2021) Delamination and hole wall roughness evaluation in air-cooled drilling of carbon fiber-reinforced polymer. Journal of Composite Materials 55:23, pages 3161-3174.
Crossref
Sagar Kubher, Suhasini Gururaja & Redouane Zitoune. (2021) In-situ cutting temperature and machining force measurements during conventional drilling of carbon fiber polymer composite laminates. Journal of Composite Materials 55:20, pages 2807-2822.
Crossref
Linghao Kong, Dong Gao & Yong Lu. (2021) Comparative analysis of the machining temperatures of an end mill and a novel tool in the orbital drilling of CFRP composites. The International Journal of Advanced Manufacturing Technology 115:11-12, pages 3713-3729.
Crossref
Guoyi Hou, Bin Luo, Kaifu Zhang, Yingxin Luo, Hui Cheng, Sipeng Cao & Yuan Li. (2021) Investigation of high temperature effect on CFRP cutting mechanism based on a temperature controlled orthogonal cutting experiment. Composite Structures 268, pages 113967.
Crossref
Xiaonan Wang, Fuji Wang, Tianyu Gu, Zhenyuan Jia & Yu Shi. (2021) Computational simulation of the damage response for machining long fibre reinforced plastic (LFRP) composite parts: A review. Composites Part A: Applied Science and Manufacturing 143, pages 106296.
Crossref
Renu Tewari, Manoj Kumar Singh, Sunny Zafar & Satvasheel Powar. (2020) Parametric optimization of laser drilling of microwave-processed kenaf/HDPE composite. Polymers and Polymer Composites 29:3, pages 176-187.
Crossref
Rodrigo F. Klein, Nícholas Hoffmann, André J. Souza, Franciele J. Rebelo & Heraldo J. Amorim. (2021) Optimization of Cutting Parameters for Finish end Milling CFRP Under Vortex-Cooled Compressed Air. Materials Research 24:suppl 2.
Crossref
Marcelo Ferreira Batista, Igor Basso, Francisco de Assis Toti, Alessandro Roger Rodrigues & José Ricardo Tarpani. (2020) Cryogenic drilling of carbon fibre reinforced thermoplastic and thermoset polymers. Composite Structures 251, pages 112625.
Crossref
Dhiraj Kumar & Suhasini Gururaja. (2020) Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs. cryogenic. Composite Structures 247, pages 112504.
Crossref
Boyu Zhang, Fuji Wang, Xiaoda Wang, Yue Li & Qi Wang. (2020) Optimized selection of process parameters based on reasonable control of axial force and hole-exit temperature in drilling of CFRP. The International Journal of Advanced Manufacturing Technology 110:3-4, pages 797-812.
Crossref
R Prakash, Vijayan Krishnaraj & Jamal Sheikh-Ahmad. (2019) High-speed edge trimming of carbon fiber-reinforced polymer composites using coated router tools. Journal of Composite Materials 53:28-30, pages 4189-4202.
Crossref
Yong-jie Bao, Yi-qi Wang, Hang Gao, Xue-shu Liu & Yi-ni Zhang. (2019) Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process单向碳纤维/环氧树脂复合材料钻削过程温度场研究. Journal of Central South University 26:10, pages 2717-2728.
Crossref
Rao Fu, Zhenyuan Jia, Fuji Wang, Yan Jin, Dan Sun, De Cheng & Lujia Yang. (2019) Cooling Process of Reverse Air Suctioning for Damage Suppression in Drilling CFRP Composites. Procedia CIRP 85, pages 147-152.
Crossref
Rao Fu, Zhenyuan Jia, Fuji Wang, Yan Jin, Dan Sun, Lujia Yang & De Cheng. (2018) Drill-exit temperature characteristics in drilling of UD and MD CFRP composites based on infrared thermography. International Journal of Machine Tools and Manufacture 135, pages 24-37.
Crossref
Zhenyuan Jia, Rao Fu, Fuji Wang, Baowei Qian & Chunling He. (2018) Temperature effects in end milling carbon fiber reinforced polymer composites. Polymer Composites 39:2, pages 437-447.
Crossref
Seok Jae Ha, Ki Beom Kim, Ji Kyung Yang & Myeong Woo Cho. (2017) Influence of cutting temperature on carbon fiber-reinforced plastic composites in high-speed machining. Journal of Mechanical Science and Technology 31:4, pages 1861-1867.
Crossref
Zhe Li, Deyuan Zhang, Wei Qin & Daxi Geng. (2016) Removal analyses of chip and rod in rotary ultrasonic-assisted drilling of carbon fiber-reinforced plastics using core drill. Journal of Reinforced Plastics and Composites 35:15, pages 1173-1190.
Crossref
Ben Wang, Hang Gao, Bo Cao, Yuan Zhuang & Zhe Zhao. (2014) Mechanism of damage generation during drilling of carbon/epoxy composites and titanium alloy stacks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:7, pages 698-706.
Crossref
Sunil Thakur & Santram Chauhan. (2013) Effect of micron and submicron size cenosphere particulate on mechanical and tribological characteristics of vinylester composites. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228:4, pages 415-423.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.