Citations (99)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (9)
Ibrahim M. Alarifi. (2023) A Review on Factors Affecting Machinability and Properties of Fiber-Reinforced Polymer Composites. Journal of Natural Fibers 20:1.
Read now
Read now
Jinyang Xu, Tieyu Lin, Ming Chen & J. Paulo Davim. (2021) Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills. Materials and Manufacturing Processes 36:6, pages 722-729.
Read now
Read now
Jinyang Xu, Xianghui Huang, Ming Chen & J. Paulo Davim. (2020) Drilling characteristics of carbon/epoxy and carbon/polyimide composites. Materials and Manufacturing Processes 35:15, pages 1732-1740.
Read now
Read now
Massimo Durante, Luca Boccarusso, Dario De Fazio & Antonio Langella. (2019) Circular cutting strategy for drilling of carbon fiber-reinforced plastics (CFRPs). Materials and Manufacturing Processes 34:5, pages 554-566.
Read now
Read now
John Abish, Pratik Samal, M. S. Narenther, C. Kannan & A. S. S. Balan. (2018) Assessment of drilling-induced damage in CFRP under chilled air environment. Materials and Manufacturing Processes 33:12, pages 1361-1368.
Read now
Read now
Changying Wang, Weiwei Ming, Qinglong An & Ming Chen. (2017) Machinability characteristics evolution of CFRP in a continuum of fiber orientation angles. Materials and Manufacturing Processes 32:9, pages 1041-1050.
Read now
Read now
S. Madhu & M. Balasubramanian. (2017) Influence of nozzle design and process parameters on surface roughness of CFRP machined by abrasive jet. Materials and Manufacturing Processes 32:9, pages 1011-1018.
Read now
Read now
Yuxi Yan, Quan Sun, Jianjun Chen & Hongliang Pan. (2015) Effect of Processing Parameters on Edge Cracking in Cold Rolling. Materials and Manufacturing Processes 30:10, pages 1174-1178.
Read now
Read now
H.H. Kim, M.S. Lee & C.G. Kang. (2013) The Fabrication of a Hybrid Material Using the Technique of Hot-Press Molding. Materials and Manufacturing Processes 28:8, pages 892-898.
Read now
Read now
Articles from other publishers (90)
Zhigang Dong, Zhenjia Wang, Junchao Tian, Renke Kang & Yan Bao. (2023) Investigation on tearing damage of CFRP circular cell honeycomb in end-face grinding. Composite Structures 325, pages 117616.
Crossref
Crossref
Yun Seok Kang, Dong Chan Kim, Hui Chan Mun, Hyung Wook Park & Jaewoo Seo. (2023) Experimental investigation of simple foam-stacked in drilling process for carbon fiber reinforced plastic. Journal of Reinforced Plastics and Composites.
Crossref
Crossref
Norbert Geier, Jinyang Xu, Dániel István Poór, Jan Hendrik Dege & J Paulo Davim. (2023) A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites. Composites Part B: Engineering 266, pages 111037.
Crossref
Crossref
Dong Chan Kim, Jaewoo Seo & Hyung Wook Park. (2023) Dynamic performance of industrial robots in the secondary carbon fiber-reinforced plastics machining. Journal of Manufacturing Processes 103, pages 120-135.
Crossref
Crossref
Jaewoo Seo, Dong Chan Kim, Hyunmin Park, Yun Seok Kang & Hyung Wook Park. (2023) Advancements and Challenges in the Carbon Fiber-Reinforced Polymer (CFRP) Trimming Process. International Journal of Precision Engineering and Manufacturing-Green Technology.
Crossref
Crossref
Sinan Liu, Zhijun Zhang, Jian Zhao, Xiaojie Wu, Xuewu Hong & Haiqiang Liu. (2023) A comparative study on milling-induced damages and residual tensile strength during milling of thermoplastic and thermoset carbon fibre reinforced polymers. Polymer Testing 125, pages 108132.
Crossref
Crossref
Chang Liu, Zhaoxin Hou, Lei Gao, Renfeng Shen, Yueyang Li & Qiang Zhou. (2023) Towards understanding the material removal mechanism in multi-tooth milling of 2.5D C/SiC composites: numerical modeling and experimental study. The International Journal of Advanced Manufacturing Technology 125:9-10, pages 4163-4184.
Crossref
Crossref
Jin Woo Kim, Jungsoo Nam, Geun Young Kim & Sang Won Lee. (2023) Artificial Intelligence (AI)–Based Surface Quality Prediction Model for Carbon Fiber Reinforced Plastics (CFRP) Milling Process. International Journal of Precision Engineering and Manufacturing-Smart Technology 1:1, pages 35-47.
Crossref
Crossref
Dinh-Ngoc Nguyen & Anh-Tuan Dang. 2023. Advances in Engineering Research and Application. Advances in Engineering Research and Application
887
894
.
M. Balasubramanian & S. Madhu. (2021) Effect of the threaded nozzle on delamination and surface texture of PEEK CF30 composite machined by abrasive jet. World Journal of Engineering 19:6, pages 755-765.
Crossref
Crossref
Ziyang Xu & Yongguo Wang. (2022) Study on cutting force and surface quality during slot milling of CFRP based on equivalent milling area. The International Journal of Advanced Manufacturing Technology 123:9-10, pages 3377-3386.
Crossref
Crossref
Boyu Zhang, Yue Li, Fuji Wang, Lelin Yang, Jun Deng, Yongquan Lin & Qingsong He. (2022) Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage. Composite Structures, pages 116495.
Crossref
Crossref
Yutong Fu & Xuefeng Yao. (2022) A review on manufacturing defects and their detection of fiber reinforced resin matrix composites. Composites Part C: Open Access 8, pages 100276.
Crossref
Crossref
Teng Gao, Yanbin Zhang, Changhe Li, Yiqi Wang, Yun Chen, Qinglong An, Song Zhang, Hao Nan Li, Huajun Cao, Hafiz Muhammad Ali, Zongming Zhou & Shubham Sharma. (2022) Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies. Frontiers of Mechanical Engineering 17:2.
Crossref
Crossref
Ziyang Xu & Yongguo Wang. (2022) Study on Milling Force and Surface Quality during Slot Milling of Plain-Woven CFRP with PCD Tools. Materials 15:11, pages 3862.
Crossref
Crossref
Chenxi Wang, Xingwu Zhang, Zhi Zhai & Xuefeng Chen. (2022) Parametric prediction model and periodic fluctuation interpretation of unidirectional CFRP edge milling force. Composite Structures 287, pages 115387.
Crossref
Crossref
T. Rajasekaran, K. Palanikumar & B. Latha. (2021) Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques. Carbon Letters 32:2, pages 615-627.
Crossref
Crossref
Haifeng Ning, Hualin Zheng, Xiufen Ma & Xinman Yuan. (2022) Finite analysis of carbon fiber–reinforced polymer delamination damage during multi-pass milling. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Hanjung Kwon. (2022) Improvement of Mechanical Properties of Hard Metals Using Solid Solution Strengthened Metallic Binder (Co1-xWx). Korean Journal of Metals and Materials 60:1, pages 14-25.
Crossref
Crossref
R. Bertolini, N.Tamil Alagan, A. Gustafsson, E. Savio, A. Ghiotti & S. Bruschi. (2022) Ultrasonic Vibration and Cryogenic assisted drilling of Aluminum-CFRP Composite Stack – An innovative approach. Procedia CIRP 108, pages 94-99.
Crossref
Crossref
Nguyen Dinh Ngoc, Pham Van Truong & Nguyen Thi Hue. 2022. Advances in Engineering Research and Application. Advances in Engineering Research and Application
400
406
.
Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain, Xavier Rimpault & Yves Beauchamp. (2021) Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design. Measurement 184, pages 109921.
Crossref
Crossref
Nicolas Duboust, Michael Watson, Matt Marshall, Garret E O’Donnel & Kevin Kerrigan. (2020) Towards intelligent CFRP composite machining: Surface analysis methods and statistical data analysis of machined fibre laminate surfaces. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:10, pages 1602-1617.
Crossref
Crossref
Boyu Zhang, Fuji Wang, Junfeng Fan, Likun Si & Wei Liu. (2021) Simulation and experimental analysis on influences of axial cutting-induced vibration on edge trimming quality of Carbon Fiber Reinforced Plastics. Journal of Manufacturing Processes 68, pages 632-645.
Crossref
Crossref
Fuji Wang, Guangjian Bi, Xiaonan Wang & Xiang Zhao. (2020) Influences of milling strategies and process parameters on the cavity defect generated during milling of carbon fiber reinforced polymer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:4, pages 723-733.
Crossref
Crossref
S. A. Sundi, R. Izamshah, M. S. Kasim, M. F. Jaafar & M. H. Hassan. 2021. Machining and Machinability of Fiber Reinforced Polymer Composites. Machining and Machinability of Fiber Reinforced Polymer Composites
101
128
.
Nguyen Dinh Ngoc, Duong Pham Tuong Minh, Nguyen Van Sy, Luong Viet Dung, Nguyen Thi Thanh Nga, Nguyen Dang Hao & Hoang Tien Dat. 2021. Advances in Engineering Research and Application. Advances in Engineering Research and Application
771
779
.
Dinh Nguyen Ngoc, Thi Nguyen Hue, Bui Van Hung & Vu Duy Duc. 2021. Advances in Engineering Research and Application. Advances in Engineering Research and Application
341
349
.
Teng Gao, Changhe Li, Dongzhou Jia, Yanbin Zhang, Min Yang, Xiaoming Wang, Huajun Cao, Runze Li, Hafiz Muhammad Ali & Xuefeng Xu. (2020) Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication. Journal of Cleaner Production 277, pages 123328.
Crossref
Crossref
X. Sourd, R. Zitoune, A. Hejjaji, M. Salem, L. Crouzeix & D. Lamouche. (2020) Multi-scale analysis of the generated damage when machining pockets of 3D woven composite for repair applications using abrasive water jet process: Contamination analysis. Composites Part A: Applied Science and Manufacturing 139, pages 106118.
Crossref
Crossref
Dervis Ozkan, Peter Panjan, Mustafa Sabri Gok & Abdullah Cahit Karaoglanli. (2020) Experimental Study on Tool Wear and Delamination in Milling CFRPs with TiAlN- and TiN-Coated Tools. Coatings 10:7, pages 623.
Crossref
Crossref
Fu-Ji Wang, Jian-Bo Yan, Meng Zhao, Dong Wang, Xiao-Nan Wang & Jia-Xuan Hao. (2020) Surface damage reduction of dry milling carbon fiber reinforced plastic/polymer using left–right edge milling tool. Journal of Reinforced Plastics and Composites 39:11-12, pages 409-421.
Crossref
Crossref
Dinh Nguyen, Mohammad Sayem Bin Abdullah, Ryan Khawarizmi, Dave Kim & Patrick Kwon. (2020) The effect of fiber orientation on tool wear in edge-trimming of carbon fiber reinforced plastics (CFRP) laminates. Wear 450-451, pages 203213.
Crossref
Crossref
N Nguyen-Dinh, C Bouvet & R Zitoune. (2019) Influence of machining damage generated during trimming of CFRP composite on the compressive strength. Journal of Composite Materials 54:11, pages 1413-1430.
Crossref
Crossref
Yanli He, Jamal Sheikh-Ahmad, Shengwei Zhu & Chunlin Zhao. (2020) Cutting force analysis considering edge effects in the milling of carbon fiber reinforced polymer composite. Journal of Materials Processing Technology 279, pages 116541.
Crossref
Crossref
Fei Su, Zhaohui Deng, Xinyi Qiu, Fujian Sun & Qiaoping Wu. (2020) Morphological characteristics and formation mechanisms of the UD-CFRP drill exit-damages. The International Journal of Advanced Manufacturing Technology 107:5-6, pages 2363-2374.
Crossref
Crossref
Mohamed Slamani & Jean-François Chatelain. (2020) Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers. Measurement 152, pages 107370.
Crossref
Crossref
Fuji Wang, Xiaonan Wang, Xiang Zhao, Guangjian Bi & Rao Fu. (2020) A numerical approach to analyze the burrs generated in the drilling of carbon fiber reinforced polymers (CFRPs). The International Journal of Advanced Manufacturing Technology 106:7-8, pages 3533-3546.
Crossref
Crossref
S Ashworth, JPA Fairclough, M Monoranu, H Ghadbeigi, J Meredith, Y Takikawa & K Kerrigan. (2020) Epifluorescent microscopy of edge-trimmed carbon fibre-reinforced polymers: An alternative to computed tomography scanning. Advanced Composites Letters 29, pages 2633366X2092467.
Crossref
Crossref
Dervis Ozkan, Mustafa Sabri Gok, Hasan Gokkaya & Abdullah Cahit Karaoglanli. (2019) Machining effects on delamination failure in milling MD-CFRPs with uncoated carbide tools. Emerging Materials Research 8:4, pages 673-685.
Crossref
Crossref
R Prakash, Vijayan Krishnaraj & Jamal Sheikh-Ahmad. (2019) High-speed edge trimming of carbon fiber-reinforced polymer composites using coated router tools. Journal of Composite Materials 53:28-30, pages 4189-4202.
Crossref
Crossref
UĞUR KOKLU & SEZER MORKAVUK. (2019) CRYOGENIC DRILLING OF CARBON FIBER-REINFORCED COMPOSITE (CFRP). Surface Review and Letters 26:09, pages 1950060.
Crossref
Crossref
Min Sik Lee, Sung Jin Kim, Hyung Yoon Seo & Chung-Gil Kang. (2019) Investigation of Formability and Fiber Orientation in the Square Deep Drawing Process with Steel/CFRP Hybrid Composites. International Journal of Precision Engineering and Manufacturing 20:11, pages 2019-2031.
Crossref
Crossref
Fuji Wang, Boyu Zhang, Zhenyuan Jia, Xiang Zhao & Qi Wang. (2019) Structural optimization method of multitooth cutter for surface damages suppression in edge trimming of Carbon Fiber Reinforced Plastics. Journal of Manufacturing Processes 46, pages 204-213.
Crossref
Crossref
Chao Qun Wu, Guang Lei Gao, Hao Nan Li & Hao Luo. (2019) Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling. The International Journal of Advanced Manufacturing Technology 104:5-8, pages 2301-2315.
Crossref
Crossref
Shigeki Yashiro, Ryuji Ono & Keiji Ogi. (2019) Effect of machining conditions on the trimming damage in composite laminates induced by out-of-plane shearing. Journal of Materials Processing Technology 271, pages 463-475.
Crossref
Crossref
Ahmet Can. (2019) Study on the Machinability of SMC Composites During Hole Milling: Influence of Tool Geometry and Machining Parameters. Arabian Journal for Science and Engineering 44:9, pages 7599-7616.
Crossref
Crossref
Dervis Ozkan, Peter Panjan, Mustafa Sabri Gok & Abdullah Cahit Karaoglanli. (2019) Investigation of machining parameters that affects surface roughness and cutting forces in milling of CFRPs with TiAlN and TiN coated carbide cutting tools. Materials Research Express 6:9, pages 095616.
Crossref
Crossref
Mohamed Slamani, Jean-François Chatelain & Hossein Hamedanianpour. (2018) Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers. International Journal of Material Forming 12:3, pages 331-353.
Crossref
Crossref
Dong Sun, Fuzhu Han & Weisheng Ying. (2019) The experimental investigation of water jet–guided laser cutting of CFRP. The International Journal of Advanced Manufacturing Technology 102:1-4, pages 719-729.
Crossref
Crossref
Sam Ashworth, J. Patrick A. Fairclough, Yoshihiro Takikawa, Richard Scaife, Hassan Ghadbeigi, Kevin Kerrigan & James Meredith. (2019) Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers. Composites Part A: Applied Science and Manufacturing 119, pages 88-100.
Crossref
Crossref
Fu-ji Wang, Bo-yu Zhang, Meng Zhao, De Cheng & Ze-gang Wang. (2018) Evolution laws of fiber-matrix interface cracks in machining of carbon fiber reinforced polymer. The International Journal of Advanced Manufacturing Technology 101:1-4, pages 963-977.
Crossref
Crossref
Petr Masek, Pavel Zeman, Petr Kolar & František Holesovsky. (2018) Edge trimming of C/PPS plates. The International Journal of Advanced Manufacturing Technology 101:1-4, pages 157-170.
Crossref
Crossref
N. Nguyen-Dinh, R. Zitoune, C. Bouvet & S. Leroux. (2019) Surface integrity while trimming of composite structures: X-ray tomography analysis. Composite Structures 210, pages 735-746.
Crossref
Crossref
Fu-ji Wang, Bo-yu Zhang, Jian-wei Ma, Guang-jian Bi & Hai-bo Hu. (2018) Computation of the Distribution of the Fiber-Matrix Interface Cracks in the Edge Trimming of CFRP. Applied Composite Materials 26:1, pages 159-186.
Crossref
Crossref
S.A Sundi, R. Izamshah, M.S Kasim & M.K.A Abdullah. (2019) Effect of machining parameters on surface quality during edge trimming of multi-directional CFRP material: Taguchi method. IOP Conference Series: Materials Science and Engineering 469, pages 012095.
Crossref
Crossref
G Mannoj Rajkumar, Dhanur Bhardwaj, C Kannan, R Oyyaravelu & A S S Balan. (2018) Effect of chilled air on delamination, induced vibration, burr formation and surface roughness in CFRP drilling: a comparative study. Materials Research Express 6:3, pages 035305.
Crossref
Crossref
Fuji Wang, Junwei Yin, Zhenyuan Jia, Bin Niu & Wei Liu. (2017) A novel approach to evaluate the delamination extent after edge trimming of carbon-fiber-reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:14, pages 2523-2532.
Crossref
Crossref
Maria Navarro-Mas, Juan García-Manrique, Maria Meseguer, Isabel Ordeig & Ana Sánchez. (2018) Delamination Study in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP). Materials 11:8, pages 1418.
Crossref
Crossref
Sezer Morkavuk, Uğur Köklü, Mehmet Bağcı & Lokman Gemi. (2018) Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study. Composites Part B: Engineering 147, pages 1-11.
Crossref
Crossref
Maojun Li, Mingjie Huang, Xiaogeng Jiang, Chun-liang Kuo & Xujing Yang. (2018) Study on burr occurrence and surface integrity during slot milling of multidirectional and plain woven CFRPs. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 163-173.
Crossref
Crossref
Fei Su, Juntang Yuan, Fujian Sun, Zhenhua Wang & Zhaohui Deng. (2018) Analytical cutting model for a single fiber to investigate the occurrences of the surface damages in milling of CFRP. The International Journal of Advanced Manufacturing Technology 96:5-8, pages 2671-2685.
Crossref
Crossref
Irina Wong Ming Ming, Azwan Iskandar Azmi, Lee Chang Chuan & Ahmad Fairuz Mansor. (2017) Experimental study and empirical analyses of abrasive waterjet machining for hybrid carbon/glass fiber-reinforced composites for improved surface quality. The International Journal of Advanced Manufacturing Technology 95:9-12, pages 3809-3822.
Crossref
Crossref
Myeong Gu Gang, Gyuho Kim, Kangwoo Shin, Anmok Jeong, Hyo-Young Kim, Cheol-Ho Kim, Seok-Woo Lee & Tae-Gon Kim. (2018) Mechanical Cutting Process Trends for Difficult-to-Cut Materials : A Review. Journal of the Korean Society for Precision Engineering 35:3, pages 253-267.
Crossref
Crossref
Irina Wong MM, AI Azmi, CC Lee & AF Mansor. (2016) Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining. The International Journal of Advanced Manufacturing Technology 94:5-8, pages 1727-1744.
Crossref
Crossref
Mohamed O. Helmy, M.H. El-Hofy & Hassan El-Hofy. (2018) Experimental Investigation of Bouncing-Back of Multidirectional CFRP Laminates during Ultrasonic Assisted Edge Trimming. Defect and Diffusion Forum 382, pages 109-113.
Crossref
Crossref
C.R. Cunningham, A. Shokrani & V. Dhokia. (2018) Edge trimming of carbon fibre reinforced plastic. Procedia CIRP 77, pages 199-202.
Crossref
Crossref
Artem Gerasimenko, Mathieu Ritou, Victor Godreau & Benoit Furet. (2018) Monitoring of trimming operation for lightweight composite structure. Procedia CIRP 72, pages 1299-1304.
Crossref
Crossref
Souhir Gara & Oleg Tsoumarev. (2017) Theoretical and experimental study of slotting CFRP material with segmented helix tool. The International Journal of Advanced Manufacturing Technology 94:1-4, pages 687-699.
Crossref
Crossref
N. Nguyen-Dinh, A. Hejjaji, R. Zitoune, C. Bouvet & L. Crouzeix. 2018. Futuristic Composites. Futuristic Composites
1
35
.
Dong Wang, Fuji Wang, Zegang Wang, Guangjian Bi & Qi Wang. 2018. Recent Advances in Intelligent Manufacturing. Recent Advances in Intelligent Manufacturing
428
439
.
Jérémy Delahaigue, Jean-Francois Chatelain & Gilbert Lebrun. (2017) Influence of Cutting Temperature on the Tensile Strength of a Carbon Fiber-Reinforced Polymer. Fibers 5:4, pages 46.
Crossref
Crossref
Yanli He, Huanan Qing, Shengguang Zhang, Dazhen Wang & Shengwei Zhu. (2017) The cutting force and defect analysis in milling of carbon fiber-reinforced polymer (CFRP) composite. The International Journal of Advanced Manufacturing Technology 93:5-8, pages 1829-1842.
Crossref
Crossref
Wolfgang Hintze & Felix Brügmann. (2017) Influence of spatial tool inclination on delamination when milling CFRP. Journal of Materials Processing Technology.
Crossref
Crossref
J.Y. Sheikh-Ahmad, M. Dhuttargaon & H. Cheraghi. (2017) New tool life criterion for delamination free milling of CFRP. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 2131-2143.
Crossref
Crossref
Fu-ji Wang, Jun-wei Yin, Jian-wei Ma, Zhen-yuan Jia, Fan Yang & Bin Niu. (2017) Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates. The International Journal of Advanced Manufacturing Technology 91:9-12, pages 3107-3120.
Crossref
Crossref
Souhir Gara, Ramzi Fredj, Sami Naîmi & Oleg Tsoumarev. (2016) Prediction of cutting forces in slotting of multidirectional CFRP laminate. The International Journal of Advanced Manufacturing Technology 89:9-12, pages 3379-3391.
Crossref
Crossref
J Delahaigue, J-F Chatelain & G Lebrun. (2017) Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231:1-2, pages 196-209.
Crossref
Crossref
N Duboust, H Ghadbeigi, C Pinna, S Ayvar-Soberanis, A Collis, R Scaife & K Kerrigan. (2016) An optical method for measuring surface roughness of machined carbon fibre-reinforced plastic composites. Journal of Composite Materials 51:3, pages 289-302.
Crossref
Crossref
Uwe Teicher, Thomas Rosenbaum, Andreas Nestler & Alexander Brosius. (2017) Characterization of the Surface Roughness of Milled Carbon Fiber Reinforced Plastic Structures. Procedia CIRP 66, pages 199-203.
Crossref
Crossref
Rangasamy Prakash, Vijayan Krishnaraj, Redouane Zitoune & Jamal Sheikh-Ahmad. (2016) High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic Emission. Materials 9:10, pages 798.
Crossref
Crossref
Seyedbehzad Ghafarizadeh, Jean-François Chatelain & Gilbert Lebrun. (2016) Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates. Science and Engineering of Composite Materials 23:5, pages 543-550.
Crossref
Crossref
Souhir Gara & Oleg Tsoumarev. (2016) Prediction of surface roughness in slotting of CFRP. Measurement 91, pages 414-420.
Crossref
Crossref
Seyedbehzad Ghafarizadeh, Gilbert Lebrun & Jean-François Chatelain. (2015) Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic. Journal of Composite Materials 50:8, pages 1059-1071.
Crossref
Crossref
Kevin Kerrigan & Garret E. O’Donnell. (2016) On the Relationship between Cutting Temperature and Workpiece Polymer Degradation During CFRP Edge Trimming. Procedia CIRP 55, pages 170-175.
Crossref
Crossref
A.H Nor Farah Huda, Helen Ascroft & Stuart Barnes. (2016) Machinability Study of Ultrasonic Assisted Machining (UAM) of Carbon Fibre Reinforced Plastic (CFRP) with Multifaceted Tool. Procedia CIRP 46, pages 488-491.
Crossref
Crossref
W. Hintze, C. Klingelhöller & O. Langhof. (2014) Curved sawing of thin lightweight components. Production Engineering 9:1, pages 51-59.
Crossref
Crossref
Qing Liang Chen, Jing Wen Zhou, Xue Mei Chen, Yan Chen & Yu Can Fu. (2015) Experimental Study on Delamination during Trimming of CFRP. Advanced Materials Research 1089, pages 331-336.
Crossref
Crossref
Erol Kiliçkap, Ahmet Yardimeden & Yahya Hışman Çelik. (2015) Investigation of experimental study of end milling of CFRP composite. Science and Engineering of Composite Materials 22:1, pages 89-95.
Crossref
Crossref
Yue Li, Fuji Wang, Boyu Zhang, Lelin Yang, Jun Deng, Yongquan Lin & Qingsong He. (2022) Machining Inclination Selection Method for Surface Milling of Cfrp Workpieces with Low Cutting-Induced Damage. SSRN Electronic Journal.
Crossref
Crossref