Citations (22)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
Jiangping Yu, Donghong Wang, Dayong Li, Ding Tang, Guoliang Zhu, Anping Dong, Da Shu & Yinghong Peng. (2019) Process parameter effects on solidification behavior of the superalloy during investment casting. Materials and Manufacturing Processes 34:15, pages 1726-1736.
Read now
Read now
Wenming Jiang, Feng Guan, Guangyu Li, Haixiao Jiang, Junwen Zhu & Zitian Fan. (2019) Processing of Al/Cu bimetal via a novel compound casting method. Materials and Manufacturing Processes 34:9, pages 1016-1025.
Read now
Read now
Qian-Qian Ren, Yu-Zhu Zhang, Yue Long, Zong-Shu Zou, Shao-Sheng Chen & Jie Li. (2018) Investigation on the effect of MgO content on the crystallization behavior of synthetic BF slag. Materials and Manufacturing Processes 33:15, pages 1654-1660.
Read now
Read now
Suo Fan, Wenming Jiang, Guangyu Li, Jianhua Mo & Zitian Fan. (2017) Fabrication and microstructure evolution of Al/Mg bimetal using a near-net forming process. Materials and Manufacturing Processes 32:12, pages 1391-1397.
Read now
Read now
L. H. Qi, X. L. Wei, T. Zhang, J. Liu, X. H. Hou & H. J. Li. (2017) Effect of fabrication parameters on carbon fibre reinforced magnesium matrix composite components. Materials Science and Technology 33:1, pages 77-83.
Read now
Read now
Jie Li, Weixing Liu, Yuzhu Zhang, Aimin Yang & Kai Zhao. (2015) Research on Modifying Blast Furnace Slag as a Raw Material of Slag Fiber. Materials and Manufacturing Processes 30:3, pages 374-380.
Read now
Read now
Articles from other publishers (16)
Lixing Song, Xueshan Du, Wenbo Cao, Jingyu Zhao, Guoli Song, Yufu Sun, Xinbiao Ma & Ran Tao. (2023) Composition and Process Optimization of Modified Heat-Hardened Sodium Silicate Bonded-Ceramic Sand. Silicon.
Crossref
Crossref
Marcin Małysza, Robert Żuczek, Dorota Wilk-Kołodziejczyk, Krzysztof Jaśkowiec, Mirosław Głowacki, Piotr Długosz & Piotr Dudek. (2022) Technological Optimization of the Stirrup Casting Process with the Use of Computer Simulations. Materials 15:19, pages 6781.
Crossref
Crossref
Xian Tong, Li Zhu, Yihao Wu, Yiting Song, Kun Wang, Shengbin Huang, Yuncang Li, Jianfeng Ma, Cuie Wen & Jixing Lin. (2022) A biodegradable Fe/Zn–3Cu composite with requisite properties for orthopedic applications. Acta Biomaterialia 146, pages 506-521.
Crossref
Crossref
Faisal Hafeez, Naveed Ahmed, Muhammad Asad Ali, Muhammad Umar Farooq, Abdullah Yahia AlFaify & Ateekh Ur Rehman. (2022) A comprehensive efficiency evaluation of conventional and ablation sand casting on the example of the AlSi7Mg alloy impeller. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 3653-3672.
Crossref
Crossref
Serhat Acar & Kerem Altug Guler. (2022) A Thorough Study on Thixoformability of the Cooling Slope Cast 7075 Feedstocks: Step-by-Step Optimization of the Feedstock Production and Thixoforming Processes. International Journal of Metalcasting.
Crossref
Crossref
Tatiana Renatovna Gilmanshina, Sergey Alexandrovich Khudonogov, Svetlana Igorevna Lytkina, Angelina Adol`fovna Kovaleva, Dmitry Yurievich Kritsky, Oleg Alexandrovich Masanskii, Alexander Evgenievich Kiselev, Alexander Mikhailovich Tokmin & Inga Anatolievna Kaposko. (2022) Investigation of the effect of the non-stick coating quality on the structure and properties of the surface of cast iron castings. The International Journal of Advanced Manufacturing Technology 119:11-12, pages 7799-7813.
Crossref
Crossref
Dongpo Xuan, Cheng Zhou, You Zhou, Tianliang Jiang, Biji Zhu, Wenhao Fan & Yangguang Jia. (2021) Numerical simulation of the top side-pouring twin-roll casting of 6.5 wt.% Si steel process. The International Journal of Advanced Manufacturing Technology 119:3-4, pages 2355-2368.
Crossref
Crossref
Kerem A. Guler & Serhat Acar. 2022. Encyclopedia of Materials: Metals and Alloys. Encyclopedia of Materials: Metals and Alloys
73
86
.
Chil-Chyuan Kuo, Yun-Ray Tasi, Ming-Yang Chen & Zheng-Yu Yan. (2021) Development of a cost-effective technique for batch production of precision wax patterns using 3D optical inspection and rapid tooling technologies. The International Journal of Advanced Manufacturing Technology 117:11-12, pages 3211-3227.
Crossref
Crossref
Yuan Li, Jinxiang Liu, Qiang Zhang & Weiqing Huang. (2021) Casting defects and microstructure distribution characteristics of aluminum alloy cylinder head with complex structure. Materials Today Communications 27, pages 102416.
Crossref
Crossref
Mikdat Gurtaran & Muhammet Uludağ. (2020) Effect of Ti addition holding time on casting quality and mechanical properties of A356 alloy. SN Applied Sciences 2:11.
Crossref
Crossref
Robert Sika, Michał Rogalewicz, Paweł Popielarski, Dorota Czarnecka-Komorowska, Damian Przestacki, Katarzyna Gawdzińska & Paweł Szymański. (2020) Decision Support System in the Field of Defects Assessment in the Metal Matrix Composites Castings. Materials 13:16, pages 3552.
Crossref
Crossref
Bhasker Soni & Somnath Biswas. (2018) Effects of cell parameters at low strain rates on the mechanical properties of metallic foams of Al and 7075-T6 alloy processed by pressurized infiltration casting method. Journal of Materials Research 33:20, pages 3418-3429.
Crossref
Crossref
Wenming Jiang & Zitian Fan. (2018) Novel technologies for the lost foam casting process. Frontiers of Mechanical Engineering 13:1, pages 37-47.
Crossref
Crossref
Bhasker Soni & Somnath Biswas. (2017) Evaluation of mechanical properties under quasi-static compression of open-cell foams of 6061-T6 Al alloy fabricated by pressurized salt infiltration casting method. Materials Characterization 130, pages 198-203.
Crossref
Crossref
Chil-Chyuan Kuo & Ren-Lung Tsai. (2015) Fabrication and Application of Low-Pressure Wax Injection Rapid Toolings. Polymers and Polymer Composites 23:9, pages 647-652.
Crossref
Crossref