Citations (33)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
C. Chandrasekhara Sastry, P. Hariharan, M. Pradeep Kumar & M. A. Muthu Manickam. (2019) Experimental investigation on boring of HSLA ASTM A36 steel under dry, wet, and cryogenic environments. Materials and Manufacturing Processes 34:12, pages 1352-1379.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan & M. Pradeep Kumar. (2019) Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy. Materials and Manufacturing Processes 34:7, pages 814-831.
Read now
Read now
Umesh Khandey, Sudarsan Ghosh & Krishnaswamy Hariharan. (2017) Machining parameters optimization for satisfying the multiple objectives in machining of MMCs. Materials and Manufacturing Processes 32:10, pages 1082-1093.
Read now
Read now
Munish Kumar Gupta, P. K. Sood & Vishal S. Sharma. (2016) Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment. Materials and Manufacturing Processes 31:13, pages 1671-1682.
Read now
Read now
Waseem Akhtar, Jianfei Sun & Wuyi Chen. (2016) Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718. Materials and Manufacturing Processes 31:5, pages 620-627.
Read now
Read now
N. Yuvaraj & M. Pradeep Kumar. (2015) Multiresponse Optimization of Abrasive Water Jet Cutting Process Parameters Using TOPSIS Approach. Materials and Manufacturing Processes 30:7, pages 882-889.
Read now
Read now
Yiğit M. Arisoy & Tuğrul Özel. (2015) Machine Learning Based Predictive Modeling of Machining Induced Microhardness and Grain Size in Ti–6Al–4V Alloy. Materials and Manufacturing Processes 30:4, pages 425-433.
Read now
Read now
Hamed Masoumi, Seyed
Mohsen Safavi, Mehdi Salehi & Saied
Mehran Nahvi. (2014) Effect of Grinding on the Residual Stress and Adhesion Strength of HVOF Thermally Sprayed WC–10Co–4Cr Coating. Materials and Manufacturing Processes 29:9, pages 1139-1151.
Read now
Read now
Nirupam Chakraborti. (2014) Critical Assessment 3: The unique contributions of multi-objective evolutionary and genetic algorithms in materials research. Materials Science and Technology 30:11, pages 1259-1262.
Read now
Read now
Wuyi Ming, Zhen Zhang, Guojun Zhang, Yu Huang, Jianwen Guo & Yuan Chen. (2014) Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDM. Materials and Manufacturing Processes 29:5, pages 514-525.
Read now
Read now
N. Chakraborti. (2014) Promise of multiobjective genetic algorithms in coating performance formulation. Surface Engineering 30:2, pages 79-82.
Read now
Read now
Articles from other publishers (22)
Zongyuan Wang, Jinhua Zhou, Junxue Ren & Ailing Shu. (2023) Hybrid prediction model for residual stress profile induced by multi-axis milling Ti-6Al-4 V titanium alloy combined finite element with experiment. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Yongjie Ma, Guang Cheng & Erbiao Jiang. (2022) Broaching force prediction of nickel-based superalloy based on material parameter identification. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:13, pages 7282-7292.
Crossref
Crossref
Berend Denkena, Bernd Breidenstein, Marc-André Dittrich, Marcel Wichmann, Hai Nam Nguyen, Lara Vivian Fricke, David Zaremba & Sebastian Barton. (2022) Setting of deformation-induced martensite content in cryogenic external longitudinal turning. Procedia CIRP 108, pages 170-175.
Crossref
Crossref
Anton Seleznev, Nestor Washington Solis Pinargote & Anton Smirnov. (2021) Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 11:9, pages 1385.
Crossref
Crossref
Quang-Phuoc Tran, Van-Nhat Nguyen & Shyh-Chour Huang. (2020) Drilling Process on CFRP: Multi-Criteria Decision-Making with Entropy Weight Using Grey-TOPSIS Method. Applied Sciences 10:20, pages 7207.
Crossref
Crossref
Chengyan Zhang, Lixin Wang, Wuzhou Meng, Xiaoli Zu & Zijun Zhang. (2020) A novel analytical modeling for prediction of residual stress induced by thermal-mechanical load during orthogonal machining. The International Journal of Advanced Manufacturing Technology 109:1-2, pages 475-489.
Crossref
Crossref
Chengyan Zhang, Lixin Wang, Xiaoli Zu & Wuzhou Meng. (2020) Multi-objective optimization of experimental and analytical residual stresses in pre-stressed cutting of thin-walled ring using glowworm swarm optimization algorithm. The International Journal of Advanced Manufacturing Technology 107:9-10, pages 3897-3908.
Crossref
Crossref
P. Ganesh Kumar, N. Yuvaraj, V. Kumaresan & R. Velraj. (2020) Selection of Heat Transfer Fluids for Solar Thermal Applications Using Multi-Criteria Decision-Making Tools. Journal of Testing and Evaluation 48:1, pages 20180539.
Crossref
Crossref
Elham Mirkoohi, Peter Bocchini & Steven Y. Liang. (2019) Inverse analysis of residual stress in orthogonal cutting. Journal of Manufacturing Processes 38, pages 462-471.
Crossref
Crossref
Bing Wang & Zhanqiang Liu. (2018) Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1925-1975.
Crossref
Crossref
Vishal S Sharma, Amit Kumar, Munish Kumar Gupta & Neeraj Bhanot. (2018) Process Parameter Optimization for Abrasive Water Jet Machining of Titanium Alloy Using Meta-Heuristic Algorithms. MATEC Web of Conferences 221, pages 01004.
Crossref
Crossref
Yiğit M. Arısoy, Luis E. Criales, Tuğrul Özel, Brandon Lane, Shawn Moylan & Alkan Donmez. (2016) Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion. The International Journal of Advanced Manufacturing Technology 90:5-8, pages 1393-1417.
Crossref
Crossref
Yiğit M. Arısoy, Changsheng Guo, Bilgin Kaftanoğlu & Tuğrul Özel. (2016) Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations. International Journal of Mechanical Sciences 107, pages 80-92.
Crossref
Crossref
T. ?zel, Y.M. Ar?soy & C. Guo. (2016) Identification of Microstructural Model Parameters for 3D Finite Element Simulation of Machining Inconel 100 Alloy. Procedia CIRP 46, pages 549-554.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Crossref
Ngoc-Trung Nguyen, Krishnaswamy Hariharan, Nirupam Chakraborti, Frédéric Barlat & Myoung-Gyu Lee. (2015) Springback Reduction in Tailor Welded Blank with High Strength Differential by Using Multi-Objective Evolutionary and Genetic Algorithms. steel research international 86:11, pages 1391-1402.
Crossref
Crossref
Yi?it M. Ar?soy & Tu?rul ?zel. (2015) Prediction of machining induced microstructure in Ti?6Al?4V alloy using 3-D FE-based simulations: Effects of tool micro-geometry, coating and cutting conditions. Journal of Materials Processing Technology 220, pages 1-26.
Crossref
Crossref
Xia Ji, Alexander H. Shih, Manik Rajora, Ya Min Shao & Steven Y. Liang. (2015) Optimization of Tensile Residual Stress on Machined Surface in MQL Turning. Applied Mechanics and Materials 713-715, pages 209-212.
Crossref
Crossref
Krishnaswamy Hariharan, Ngoc-Trung Nguyen, Nirupam Chakraborti, Myoung-Gyu Lee & Frédéric Barlat. (2014) Multi-Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels. steel research international 85:12, pages 1597-1607.
Crossref
Crossref
Krishnaswamy Hariharan, Nirupam Chakraborti, Frédéric Barlat & Myoung-Gyu Lee. (2014) A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill’s Coefficients. Metallurgical and Materials Transactions A 45:6, pages 2704-2707.
Crossref
Crossref
D. Ulutan, Y.M. Arisoy, T. Özel & L. Mears. (2014) Empirical Modeling of Residual Stress Profile in Machining Nickel-based Superalloys Using the Sinusoidal Decay Function. Procedia CIRP 13, pages 365-370.
Crossref
Crossref
T. Özel & Y.M. Arisoy. (2014) Experimental and Numerical Investigations on Machining Induced Surface Integrity in Inconel-100 Nickel-Base Alloy. Procedia CIRP 13, pages 302-307.
Crossref
Crossref