Citations (22)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Diego Jorge Alves Borges, Adriel Magalhães Souza & Eraldo Jannone da Silva. (2023) A review on the production of grinding tools through additive manufacturing processes: From current possibilities to future perspectives. Machining Science and Technology 27:5, pages 472-530.
Read now
Read now
Ashwani Sharma, Mohd Zaheer Khan Yusufzai & Meghanshu Vashista. (2022) A comparative analysis of grinding of AISI D2 tool steel under different environments. Machining Science and Technology 26:2, pages 183-202.
Read now
Read now
Ravi Kant & Sukhdeep S. Dhami. (2021) Investigating Process Parameters of Abrasive Water Jet Machine using EN31. Materials and Manufacturing Processes 36:14, pages 1597-1603.
Read now
Read now
Manish Mukhopadhyay, Pranab Kumar Kundu, Souvik Chatterjee & Santanu Das. (2019) Impact of dressing infeed on SiC wheel for grinding Ti-6Al-4V. Materials and Manufacturing Processes 34:1, pages 54-60.
Read now
Read now
Manish Mukhopadhyay, Pranab Kumar Kundu & Santanu Das. (2018) Experimental investigation on enhancing grindability using alkaline-based fluid for grinding Ti-6Al-4V. Materials and Manufacturing Processes 33:16, pages 1775-1781.
Read now
Read now
Manish Mukhopadhyay & Pranab Kumar Kundu. (2018) Optimization of dressing infeed of alumina wheel for grinding Ti-6Al-4V. Materials and Manufacturing Processes 33:13, pages 1453-1458.
Read now
Read now
J. Elanchezhian & M. Pradeep Kumar. (2018) Effect of nozzle angle and depth of cut on grinding titanium under cryogenic CO2. Materials and Manufacturing Processes 33:13, pages 1466-1470.
Read now
Read now
Rachin Goyal, Sehijpal Sngh & Harmesh Kumar. (2018) Performance evaluation of cryogenically assisted electric discharge machining (CEDM) process. Materials and Manufacturing Processes 33:4, pages 433-443.
Read now
Read now
R. Manivannan & M. Pradeep Kumar. (2018) Improving the machining performance characteristics of the µEDM drilling process by the online cryogenic cooling approach. Materials and Manufacturing Processes 33:4, pages 390-396.
Read now
Read now
P. Sivaiah & D. Chakradhar. (2017) Machinability studies on 17-4 PH stainless steel under cryogenic cooling environment. Materials and Manufacturing Processes 32:15, pages 1775-1788.
Read now
Read now
N. Govindaraju, L. Shakeel Ahmed & M. Pradeep Kumar. (2014) Experimental Investigations on Cryogenic Cooling in the Drilling of AISI 1045 Steel. Materials and Manufacturing Processes 29:11-12, pages 1417-1421.
Read now
Read now
Yusuf Kaynak, Tao Lu & I. S. Jawahir. (2014) Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining. Machining Science and Technology 18:2, pages 149-198.
Read now
Read now
Articles from other publishers (10)
P. Sivaiah, D. Chakradhar & R. Ganesh Narayanan. 2023. Sustainable Manufacturing Processes. Sustainable Manufacturing Processes
113
154
.
Jiaqiang DANG, Heng ZANG, Qinglong AN, Weiwei MING & Ming CHEN. (2022) Feasibility study of creep feed grinding of 300M steel with zirconium corundum wheel. Chinese Journal of Aeronautics 35:3, pages 565-578.
Crossref
Crossref
Faruk Abedrabbo, Denis Soriano, Aitor Madariaga, Raúl Fernández, Sepideh Abolghasem & Pedro J. Arrazola. (2021) Experimental evaluation and surface integrity analysis of cryogenic coolants approaches in the cylindrical plunge grinding. Scientific Reports 11:1.
Crossref
Crossref
Arunachalam S. S. Balan, Kannan Chidambaram, Arun V. Kumar, Hariharan Krishnaswamy, Danil Yurievich Pimenov, Khaled Giasin & Krzysztof Nadolny. (2021) Effect of Cryogenic Grinding on Fatigue Life of Additively Manufactured Maraging Steel. Materials 14:5, pages 1245.
Crossref
Crossref
Aswani Kumar Singh, Amresh Kumar, Varun Sharma & Prateek Kala. (2020) Sustainable techniques in grinding: State of the art review. Journal of Cleaner Production 269, pages 121876.
Crossref
Crossref
Wulin Zhang, Pengfei Zhang, Jun Zhang, Xiaoqiang Fan & Minhao Zhu. (2020) Probing the effect of abrasive grit size on rail grinding behaviors. Journal of Manufacturing Processes 53, pages 388-395.
Crossref
Crossref
Wojciech Stachurski, Jacek Sawicki, Ryszard Wójcik & Krzysztof Nadolny. (2018) Influence of application of hybrid MQL-CCA method of applying coolant during hob cutter sharpening on cutting blade surface condition. Journal of Cleaner Production 171, pages 892-910.
Crossref
Crossref
Wenfeng Ding, Liangchi Zhang, Zheng Li, Yejun Zhu, Honghua Su & Jiuhua Xu. (2016) Review on grinding-induced residual stresses in metallic materials. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2939-2968.
Crossref
Crossref
Manchao Zhang, Zhenqiang Yao & Sheng Xu. (2015) Optimization of Roughness and Residual Stresses in Path Controlled Grinding of Crankpin. Procedia CIRP 36, pages 117-122.
Crossref
Crossref
N. Govindaraju, Ahmed L. Shakeel & M. Pradeepkumar. (2014) Experimental Investigations on Cryogenic Cooling in Drilling of Aluminium Alloy. Applied Mechanics and Materials 592-594, pages 316-320.
Crossref
Crossref