Citations (46)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
N.E. Arun kumar, A. Suresh Babu, M. Subramanian & N Arunkumar. (2022) Influence of MQL on performance evaluation of EN19 steel under centreless grinding. Materials and Manufacturing Processes 37:14, pages 1618-1629.
Read now
Read now
Roshan Lal Virdi, Sukhpal Singh Chatha & Hazoor Singh. (2022) Processing Characteristics of Different Vegetable Oil-based Nanofluid MQL for Grinding of Ni-Cr Alloy. Advances in Materials and Processing Technologies 8:1, pages 210-223.
Read now
Read now
Nithin Tom Mathew & Vijayaraghavan Laxmanan. (2018) Temperature rise in workpiece and cutting tool during drilling of titanium aluminide under sustainable environment. Materials and Manufacturing Processes 33:16, pages 1765-1774.
Read now
Read now
Rajeshkumar Madarkar, Sahaj Agarwal, Pirsab Attar, S. Ghosh & P. V. Rao. (2018) Application of ultrasonic vibration assisted MQL in grinding of Ti–6Al–4V. Materials and Manufacturing Processes 33:13, pages 1445-1452.
Read now
Read now
Lai Zou, Yun Huang, Ming Zhou & Yinguang Yang. (2018) Effect of cryogenic minimum quantity lubrication on machinability of diamond tool in ultraprecision turning of 3Cr2NiMo steel. Materials and Manufacturing Processes 33:9, pages 943-949.
Read now
Read now
Xiangming Huang, Yinghui Ren, Tong Li, Zhixiong Zhou & Gaofeng Zhang. (2018) Influence of minimum quantity lubrication parameters on grind-hardening process. Materials and Manufacturing Processes 33:1, pages 69-76.
Read now
Read now
Sourabh Paul, Abhinav Kumar Singh & Amitava Ghosh. (2017) Grinding of Ti-6Al-4V Under Small Quantity Cooling Lubrication Environment Using Alumina and MWCNT Nanofluids. Materials and Manufacturing Processes 32:6, pages 608-615.
Read now
Read now
Vishal S. Sharma, GurRaj Singh & Knut Sørby. (2015) A Review on Minimum Quantity Lubrication for Machining Processes. Materials and Manufacturing Processes 30:8, pages 935-953.
Read now
Read now
Elisa Vazquez, DanielT. Kemmoku, PedroY. Noritomi, JorgeV. L. da Silva & Joaquim Ciurana. (2014) Computer Fluid Dynamics Analysis for Efficient Cooling and Lubrication Conditions in Micromilling of Ti6Al4V Alloy. Materials and Manufacturing Processes 29:11-12, pages 1494-1501.
Read now
Read now
M. Amrita, R.R. Srikant & A.V. Sitaramaraju. (2014) Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process. Materials and Manufacturing Processes 29:5, pages 600-605.
Read now
Read now
S. Amini & H. Paktinat. (2014) Ceramic Tools with Ordinary and Wiper Inserts in Near Dry Machining with High Speed on Super Alloy Monel K500. Materials and Manufacturing Processes 29:5, pages 579-584.
Read now
Read now
Articles from other publishers (35)
Y. S. Dambatta, Changhe Li, Min Yang, L. I. Beikai, Teng Gao, Mingzheng Liu, Xin Cui, Xiaoming Wang, Yanbin Zhang, Zafar Said, Shubham Sharma & Zongming Zhou. (2023) Grinding with minimum quantity lubrication: a comparative assessment. The International Journal of Advanced Manufacturing Technology 128:3-4, pages 955-1014.
Crossref
Crossref
R. Oyyaravelu, C. Kannan, P. Kuppan & A.S.S. Balan. (2023) Experimental investigation of oxygen as carrier gas in minimum quantity lubrication milling of H11 die steel. Materials Today: Proceedings.
Crossref
Crossref
Roshan Lal Virdi, Amrit Pal, Sukhpal Singh Chatha & Hazoor Singh Sidhu. (2023) A review on minimum quantity lubrication technique application and challenges in grinding process using environment-friendly nanofluids. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:5.
Crossref
Crossref
Manoj Kumar Sinha, Ashutosh Pal, Kamal Kishore, Amarjit Singh, Archana, Hitesh Sansanwal & Pankaj Sharma. (2022) Applications of sustainable techniques in machinability improvement of superalloys: a comprehensive review. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 473-498.
Crossref
Crossref
Farooqui Rizwan Ahmed, Prameet Vats, Rabesh Kumar Singh & Anuj Kumar Sharma. 2023. Recent Advances in Materials Processing and Characterization. Recent Advances in Materials Processing and Characterization
263
273
.
Qian Zhou, Vinothkumar Sivalingam, Jie Sun, Pradeep Kumar Murugasen, Munish Kumar Gupta & Mehmet Erdi Korkmaz. (2022) Understanding the machining induced tribological mechanism of Hastelloy-X under sustainable cooling/lubrication conditions. The International Journal of Advanced Manufacturing Technology 123:3-4, pages 973-983.
Crossref
Crossref
Zishan Ding, Jian Sun, Weicheng Guo, Xiaohui Jiang, Chongjun Wu & Steven Y. Liang. (2021) Thermal Analysis of 3J33 Grinding Under Minimum Quantity Lubrication Condition. International Journal of Precision Engineering and Manufacturing-Green Technology 9:5, pages 1247-1265.
Crossref
Crossref
Munish Kumar Gupta, Aqib Mashood Khan, Qinghua Song, Zhanqiang Liu, Qazi Salman Khalid, Muhammad Jamil, Mustafa Kuntoğlu, Üsame Ali Usca, Murat Sarıkaya & Danil Yu Pimenov. (2021) A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process. The International Journal of Advanced Manufacturing Technology 117:3-4, pages 729-750.
Crossref
Crossref
Mr. Pratap R. Sonawane & Dr. Rahul B. Barjibhe. (2021) Analysis of Machining Operation using Vegetable Oil and Nano Fluids. International Journal of Advanced Research in Science, Communication and Technology, pages 380-386.
Crossref
Crossref
Nimel Sworna Ross K, Manimaran G, Saqib Anwar, M. Azizur Rahman, Mehmet Erdi Korkmaz, Munish Kumar Gupta, Abdullah Alfaify & Mozammel Mia. (2021) Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication. Tribology International 155, pages 106762.
Crossref
Crossref
Pralhad B. Patole, Vivek V. Kulkarni & Sudhir G. Bhatwadekar. (2021) MQL Machining with nano fluid: a review. Manufacturing Review 8, pages 13.
Crossref
Crossref
Roshan Lal Virdi, Sukhpal Singh Chatha & Hazoor Singh. (2021) Experimental investigations on the tribological and lubrication behaviour of minimum quantity lubrication technique in grinding of Inconel 718 alloy. Tribology International 153, pages 106581.
Crossref
Crossref
Anuj Sharma & Rajesh Kumar. (2021) Potential use of minimum quantity lubrication (MQL) in machining of biocompatible materials using environment friendly cutting fluids: An overview. Materials Today: Proceedings 45, pages 5315-5319.
Crossref
Crossref
M. Subramanian, S. Balakrishnan, N. Vinoth Babu, V. Hariharan & T. Balasubramanian. (2021) Implementation and optimization of minimum quantity lubrication for machining LM4 aluminium alloy. Materials Today: Proceedings 44, pages 1635-1642.
Crossref
Crossref
Binayak Sen, Mozammel Mia, G. M. Krolczyk, Uttam Kumar Mandal & Sankar Prasad Mondal. (2019) Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology 8:1, pages 249-280.
Crossref
Crossref
Roshan Lal Virdi, Sukhpal Singh Chatha & Hazoor Singh. (2020) Machining performance of Inconel-718 alloy under the influence of nanoparticles based minimum quantity lubrication grinding. Journal of Manufacturing Processes 59, pages 355-365.
Crossref
Crossref
Aswani Kumar Singh, Amresh Kumar, Varun Sharma & Prateek Kala. (2020) Sustainable techniques in grinding: State of the art review. Journal of Cleaner Production 269, pages 121876.
Crossref
Crossref
Akash Subhash Awale, Meghanshu Vashista & Mohd Zaheer Khan Yusufzai. (2020) Multi-objective optimization of MQL mist parameters for eco-friendly grinding. Journal of Manufacturing Processes 56, pages 75-86.
Crossref
Crossref
G. Manimaran & K. Nimel Sworna Ross. (2020) Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool. Journal of Testing and Evaluation 48:4, pages 20180130.
Crossref
Crossref
Gurraj Singh, Munish Kumar Gupta, Hussein Hegab, Aqib Mashood Khan, Qinghua Song, Zhanqiang Liu, Mozammel Mia, Muhammed Jamil, Vishal S. Sharma, Murat Sarikaya & Catalin Iulian Pruncu. (2020) Progress for sustainability in the mist assisted cooling techniques: a critical review. The International Journal of Advanced Manufacturing Technology 109:1-2, pages 345-376.
Crossref
Crossref
Zafar Said, Munish Gupta, Hussien Hegab, Neeti Arora, Aqib Mashood Khan, Muhammad Jamil & Evangelos Bellos. (2019) A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 2057-2086.
Crossref
Crossref
Yusuf S. Dambatta, Ahmed A. D Sarhan, Mohd Bin Ab Karim Sayuti & M. Hamdi Bin Abd Shukor. (2019) Fuzzy logic method to investigate grinding of alumina ceramic using minimum quantity lubrication. International Journal of Applied Ceramic Technology 16:4, pages 1668-1683.
Crossref
Crossref
Gurraj Singh, Catalin Iulian Pruncu, Munish Kumar Gupta, Mozammel Mia, Aqib Mashood Khan, Muhammad Jamil, Danil Yurievich Pimenov, Binayak Sen & Vishal S. Sharma. (2019) Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms. Materials 12:6, pages 999.
Crossref
Crossref
Yusuf S. Dambatta, Mohd Sayuti, Ahmed A.D. Sarhan, Hamdi Bin Ab Shukor, Nur Aqilah binti Derahman & Sunusi Marwana Manladan. (2019) Prediction of specific grinding forces and surface roughness in machining of AL6061-T6 alloy using ANFIS technique. Industrial Lubrication and Tribology 71:2, pages 309-317.
Crossref
Crossref
Anirban Naskar, Biddu Bhushan Singh, Amit Choudhary & S. Paul. (2018) Effect of different grinding fluids applied in minimum quantity cooling-lubrication mode on surface integrity in cBN grinding of Inconel 718. Journal of Manufacturing Processes 36, pages 44-50.
Crossref
Crossref
Yusuf S. Dambatta, M. Sayuti, Ahmed A. D. Sarhan & M. Hamdi. (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology 96:9-12, pages 3959-3976.
Crossref
Crossref
Reza Teimouri & Saeid Amini. (2017) Forward and reverse mapping of multiresponses turning process using adaptive network-based fuzzy inference system and simulated annealing algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232:10, pages 1746-1758.
Crossref
Crossref
J Kananathan, M Samykano, K Sudhakar, S R Subramaniam, S K Selavamani, Nallapaneni Manoj Kumar, Ngui Wai Keng, K Kadirgama, W A W Hamzah & W S W Harun. (2018) Nanofluid as coolant for grinding process: An overview. IOP Conference Series: Materials Science and Engineering 342, pages 012078.
Crossref
Crossref
Pralhad B. Patole & Vivek V. Kulkarni. (2018) Prediction of surface roughness and cutting force under MQL turning of AISI 4340 with nano fluid by using response surface methodology. Manufacturing Review 5, pages 5.
Crossref
Crossref
Anish Gupta, Paresh Swami, A.S.S. Balan, P. Kuppan & R. Oyyaravelu. (2018) Numerical Modeling and Heat Transfer Analysis of Minimum Quantity Lubrication Grinding of Inconel 751. Materials Today: Proceedings 5:5, pages 13358-13366.
Crossref
Crossref
J. N. Rohit, K. Surendra Kumar, N. Sura Reddy, P. Kuppan & A. S. S. Balan. 2018. Simulations for Design and Manufacturing. Simulations for Design and Manufacturing
45
78
.
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M. Sayuti & M. Hamdi. (2017) Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review. The International Journal of Advanced Manufacturing Technology 92:9-12, pages 3825-3858.
Crossref
Crossref
Nithin Tom Mathew & L. Vijayaraghavan. (2017) Environmentally friendly drilling of intermetallic titanium aluminide at different aspect ratio. Journal of Cleaner Production 141, pages 439-452.
Crossref
Crossref
A.S.S. Balan, L. Vijayaraghavan, R. Krishnamurthy, P. Kuppan & R. Oyyaravelu. (2016) An experimental assessment on the performance of different lubrication techniques in grinding of Inconel 751. Journal of Advanced Research 7:5, pages 709-718.
Crossref
Crossref
Anuj Kumar Sharma, Arun Kumar Tiwari & Amit Rai Dixit. (2016) Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. Journal of Cleaner Production 127, pages 1-18.
Crossref
Crossref