Citations (27)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (9)
Shubham Jain & Vishal Parashar. (2023) WEDM process parameters optimization by preference-based CS & PSO algorithm for LCP. Materials and Manufacturing Processes 38:7, pages 797-815.
Read now
Read now
Dabin Liu, Zhongcai Deng, Guijian Xiao & Gang Liu. (2023) Material removal and belt wear in laser assisted grinding TC17. Materials and Manufacturing Processes 38:5, pages 577-588.
Read now
Read now
Thrinadh Jadam, Saurav Datta & Manoj Masanta. (2021) Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid. Machining Science and Technology 25:2, pages 237-287.
Read now
Read now
Rongkai Tan, Xuesen Zhao, Shuo Zhang, Xicong Zou, Shusen Guo, Zhenjiang Hu & Tao Sun. (2019) Study on ultra-precision processing of Ti-6Al-4V with different ultrasonic vibration-assisted cutting modes. Materials and Manufacturing Processes 34:12, pages 1380-1388.
Read now
Read now
Krishnendu Mondal, Santanu Das, Bijoy Mandal & Debashis Sarkar. (2016) An Investigation on Turning Hardened Steel Using Different Tool Inserts. Materials and Manufacturing Processes 31:13, pages 1770-1781.
Read now
Read now
Shuangji Shi, Zhuji Jin, Yan Bao & Guannan Jiang. (2016) Study of Milling Time and Process Control Agent on W–Mo–Cr Pre-Alloying Powders. Materials and Manufacturing Processes 31:7, pages 926-932.
Read now
Read now
Vinod Mishra, Neha Khatri, Keshva Nand, Karanvir Singh & RamaGopal V Sarepaka. (2015) Experimental Investigation on Uncontrollable Parameters for Surface Finish during Diamond Turning. Materials and Manufacturing Processes 30:2, pages 232-240.
Read now
Read now
Anikate Gupta, SV Ramagopal, Ajay Batish & Anirban Bhattacharya. (2014) Surface Roughness and Profile Error in Precision Diamond Turning of C18000. Materials and Manufacturing Processes 29:5, pages 606-613.
Read now
Read now
Salman Pervaiz, Amir Rashid, Ibrahim Deiab & Mihai Nicolescu. (2014) Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review. Materials and Manufacturing Processes 29:3, pages 219-252.
Read now
Read now
Articles from other publishers (18)
Yang Cao, Xuesen Zhao, Guo Li, Wenjun Zong & Tao Sun. (2023) Study regarding the influence of process conditions on the surface topography during ultra-precision turning. Journal of Manufacturing Processes 102, pages 23-36.
Crossref
Crossref
Wang Sujuan, Yu Liangbao, Qin Chao & Sun Zhanwen. (2023) Machinability improvement of titanium alloys in ultra-precision machining with micro-structured surface. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Crossref
Crossref
Yingshuai Xu, Jie Zhang, Qinjian Zhang, Shufeng Huang, Yihan Wu & Jing He. (2023) Theoretical and experimental investigations of tool wear in ultrasonic vibration–assisted turning of 304 austenitic stainless steel. The International Journal of Advanced Manufacturing Technology 127:7-8, pages 3157-3181.
Crossref
Crossref
Hongfei Wang, Qingshun Bai, Shandeng Chen, Yuhao Dou, Wanmin Guo & Tingting Wang. (2023) Performance Evaluation of Graphene Nanofluid to Mitigate the Wear of a Diamond Tool in Micro-Machining of Ti6Al4V Alloy. Journal of Manufacturing and Materials Processing 7:4, pages 131.
Crossref
Crossref
Xiaoling Zhu, Li Cai & Xiaohua Qian. (2022) Influence of different cutting edges caused by tool wear on cutting process of titanium alloy TC21 based on finite element model. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:1-2, pages 229-239.
Crossref
Crossref
Shahrokh Hatefi & Khaled Abou-El-Hossein. (2022) Experimental investigation on the effects of magnetic field assistance on the quality of surface finish for sustainable manufacturing of ultra-precision single-point diamond turning of titanium alloys. Frontiers in Mechanical Engineering 8.
Crossref
Crossref
Shubham Jain & Vishal Parashar. (2022) Comparison of priori and posteriori approach of multi-objective optimization for WEDM on Ti6Al4V alloy. Materials Research Express 9:7, pages 076504.
Crossref
Crossref
Zexuan Huo, Guoqing Zhang, Junhong Han, Jianpeng Wang, Shuai Ma & Haitao Wang. (2022) A Review of the Preparation, Machining Performance, and Application of Fe-Based Amorphous Alloys. Processes 10:6, pages 1203.
Crossref
Crossref
Xiaosheng Luan, Jianbing Meng, BingQi Huang, Xiaojuan Dong, Yizhong Hu, Yugang Zhao, Hongwei Zhang & Linghui Qu. (2020) Machining characteristics of Ti6Al4V alloy in laser-assisted machining under minimum quantity lubricant. The International Journal of Advanced Manufacturing Technology 112:3-4, pages 775-785.
Crossref
Crossref
Mohit Kumar Sahu & Raj Kumar Sahu. (2020) Experimental Investigation, Modeling, and Optimization of Wear Parameters of B4C and Fly-Ash Reinforced Aluminum Hybrid Composite. Frontiers in Physics 8.
Crossref
Crossref
C Emmy Prema, S Suresh, G Ramanan & M Sivaraj. (2020)
Characterization, corrosion and failure strength analysis of Al7075 influenced with B
4
C and Nano-Al
2
O
3
composite using online acoustic emission
. Materials Research Express 7:1, pages 016524.
Crossref
Crossref
Krishnendu Mondal & Santanu Das. (2017) An Investigation on Machinability during Turning Hardened Steel in Dry Condition. Journal of The Institution of Engineers (India): Series C 99:6, pages 637-644.
Crossref
Crossref
Yahya Hişman ÇELİK & Erol KILIÇKAP. (2018) Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 6:1, pages 163-175.
Crossref
Crossref
W S Yip & S To. (2017) An application of eddy current damping effect on single point diamond turning of titanium alloys. Journal of Physics D: Applied Physics 50:43, pages 435002.
Crossref
Crossref
M. S. Uddin, Binh Pham, Ahmed Sarhan, Animesh Basak & Alokesh Pramanik. (2017) Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V. Advances in Manufacturing 5:1, pages 83-91.
Crossref
Crossref
Ming Luo, Jing Wang, Baohai Wu & Dinghua Zhang. (2017) Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V. Chinese Journal of Mechanical Engineering 30:1, pages 53-59.
Crossref
Crossref
Hongmin Xin, Yaoyao Shi & Liqun Ning. (2016) Tool wear in disk milling grooving of titanium alloy. Advances in Mechanical Engineering 8:10, pages 168781401667162.
Crossref
Crossref
A.G. Rao, V.P. Deshmukh, N. Prabhu & B.P. Kashyap. (2016) Enhancing the machinability of hypereutectic Al-30Si alloy by friction stir processing. Journal of Manufacturing Processes 23, pages 130-134.
Crossref
Crossref