Citations (55)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
Kaixin Su, Jiawei Zhang, Jiwang Zhang, Tao Yan & Guiming Mei. (2023) Optimisation of current collection quality of high-speed pantograph-catenary system using the combination of artificial neural network and genetic algorithm. Vehicle System Dynamics 61:1, pages 260-285.
Read now
Read now
Aldrin Raj J, K. Balasubramanian, D. Palanisamy & Emmanuel AGS. (2020) Experimental investigations on WEDM process for machining High Manganese steel. Materials and Manufacturing Processes 35:14, pages 1612-1621.
Read now
Read now
Somvir Singh Nain, Dixit Garg & Sanjeev Kumar. (2018) Performance evaluation of the WEDM process of aeronautics super alloy. Materials and Manufacturing Processes 33:16, pages 1793-1808.
Read now
Read now
N. E. Arun Kumar & A. Suresh Babu. (2018) Influence of input parameters on the near-dry WEDM of Monel alloy. Materials and Manufacturing Processes 33:1, pages 85-92.
Read now
Read now
Amitava Mandal, Amit Rai Dixit, Alok Kumar Das & Niladri Mandal. (2016) Modeling and Optimization of Machining Nimonic C-263 Superalloy using Multicut Strategy in WEDM. Materials and Manufacturing Processes 31:7, pages 860-868.
Read now
Read now
Wuyi Ming, Zhen Zhang, Guojun Zhang, Yu Huang, Jianwen Guo & Yuan Chen. (2014) Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDM. Materials and Manufacturing Processes 29:5, pages 514-525.
Read now
Read now
Articles from other publishers (49)
Muhammad Sana, Muhammad Umar Farooq, Saqib Anwar & Rodolfo Haber. (2023) Predictive modelling framework on the basis of artificial neural network: A case of nano-powder mixed electric discharge machining. Heliyon 9:12, pages e22508.
Crossref
Crossref
Sunder Jebarose Juliyana, Jayavelu Udaya Prakash, Charles Sarala Rubi, Sachin Salunkhe, Sharad Ramdas Gawade, Emad S. Abouel Nasr & Ali K. Kamrani. (2023) Optimization of Wire EDM Process Parameters for Machining Hybrid Composites Using Grey Relational Analysis. Crystals 13:11, pages 1549.
Crossref
Crossref
Wuyi Ming, Xudong Guo, Guojun Zhang, Shunchang Hu, Zhen Liu, Zhuobin Xie, Shengfei Zhang & Liuyang Duan. (2023) Optimization of process parameters and performance for machining Inconel 718 in renewable dielectrics. Alexandria Engineering Journal 79, pages 164-179.
Crossref
Crossref
Yanyan Chen, Shunchang Hu, Ansheng Li, Yang Cao, Yangjing Zhao & Wuyi Ming. (2023) Parameters Optimization of Electrical Discharge Machining Process Using Swarm Intelligence: A Review. Metals 13:5, pages 839.
Crossref
Crossref
Wuyi Ming, Xudong Guo, Yingjie Xu, Guojun Zhang, Zhiwen Jiang, Yizhong Li & Xiaoke Li. (2023) Progress in non-traditional machining of amorphous alloys. Ceramics International 49:2, pages 1585-1604.
Crossref
Crossref
Ling-Yi Xu, Xue-Cheng Xi, Zi-Lun Li, Jie-Yu Ma, Qiang Gao & Wan-Sheng Zhao. (2022) Wire breakage prevention for reciprocated traveling WEDM based on discharge location detection. The International Journal of Advanced Manufacturing Technology 123:5-6, pages 1859-1875.
Crossref
Crossref
Yanyan Chen, Xudong Guo, Guojun Zhang, Yang Cao, Dili Shen, Xiaoke Li, Shengfei Zhang & Wuyi Ming. (2022) Development of a Hybrid Intelligent Process Model for Micro-Electro Discharge Machining Using the TTM-MDS and Gaussian Process Regression. Micromachines 13:6, pages 845.
Crossref
Crossref
Shankar Rajendran, Ganesh N., Robert Čep, Narayanan R. C., Subham Pal & Kanak Kalita. (2022) A Conceptual Comparison of Six Nature-Inspired Metaheuristic Algorithms in Process Optimization. Processes 10:2, pages 197.
Crossref
Crossref
Le Hoang Anh, Nguyen Manh Cuong, Tran Ngoc Huy Thinh, Trinh Kieu Tuan, Nguyen Anh Tuan, Tran Thanh Hoang, Tran Ngoc Giang & Nguyen Thanh Tu. 2022. Advances in Engineering Research and Application. Advances in Engineering Research and Application
392
399
.
BANESWAR SARKER & SHANKAR CHAKRABORTY. (2021) Structural equation modeling-based performance estimation and parametric analysis of wire electrical discharge machining processes. Sādhanā 46:1.
Crossref
Crossref
Anish Kumar, Renu Sharma, Arun Kumar Gupta & Rajneesh Gujral. (2021) Investigation of biocompatible implant material through WEDM process using RSM modeling hybrid with the machine learning algorithm. Sādhanā 46:3.
Crossref
Crossref
Thanikodi Sathish, Vinayagam Mohanavel, Khalid Ansari, Rathinasamy Saravanan, Alagar Karthick, Asif Afzal, Sagr Alamri & C. Ahamed Saleel. (2021) Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC. Materials 14:13, pages 3689.
Crossref
Crossref
Priyaranjan Sharma, D. Chakradhar & S. Narendranath. (2021) Measurement of WEDM performance characteristics of aero-engine alloy using RSM-based TLBO algorithm. Measurement 179, pages 109483.
Crossref
Crossref
Sarmad Ali Khan, Mudassar Rehman, Muhammad Umar Farooq, Muhammad Asad Ali, Rakhshanda Naveed, Catalin I. Pruncu & Waheed Ahmad. (2021) A Detailed Machinability Assessment of DC53 Steel for Die and Mold Industry through Wire Electric Discharge Machining. Metals 11:5, pages 816.
Crossref
Crossref
Kanak Kalita, Ranjan Kumar Ghadai, Dinesh S. Shinde & Xiao-Zhi Gao. 2021. Data-Driven Optimization of Manufacturing Processes. Data-Driven Optimization of Manufacturing Processes
128
150
.
Anish Kumar, Renu Sharma & Arun Kumar Gupta. (2021) Experimental investigation of WEDM process through integrated desirability and machine learning technique on implant material. Journal of the Mechanical Behavior of Materials 30:1, pages 38-48.
Crossref
Crossref
N.E. Arun Kumar, N. Sathishkumar, E. Raviraj, M. Pathri Narayanan & Roderik Eugene. (2021) Influence of near dry wirecut electrical discharge machining parameters on kerf width in Monel 400. Materials Today: Proceedings 39, pages 1519-1526.
Crossref
Crossref
Vishal Lalwani, Priyaranjan Sharma, Catalin Iulian Pruncu & Deepak Rajendra Unune. (2020) Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Performance of Wire Electrical Discharge Machining of Inconel 718 Alloy. Journal of Manufacturing and Materials Processing 4:2, pages 44.
Crossref
Crossref
Sharifah Zarith Rahmah Syed Ahmad, Azlan Mohd Zain, Yusliza Yusoff, Nurzal Effiyana Ghazali & Kai-Qing Zhou. (2020) Wire Electrical Discharge Machining (WEDM) optimization process: A conceptual view. IOP Conference Series: Materials Science and Engineering 864:1, pages 012089.
Crossref
Crossref
Wenzhao Wang, Mingbo Qiu, Zhidong Liu, Ming Zhang & Chengjie Shao. (2020) Study on the influence of kerosene content on burn in high speed–wire cut electrical discharge machining dielectric fluid. The International Journal of Advanced Manufacturing Technology 107:7-8, pages 3135-3143.
Crossref
Crossref
Yasir Nawaz, Shahid Maqsood, Khawar Naeem, Rashid Nawaz, Muhammad Omair & Tufail Habib. (2020) Parametric optimization of material removal rate, surface roughness, and kerf width in high-speed wire electric discharge machining (HS-WEDM) of DC53 die steel. The International Journal of Advanced Manufacturing Technology 107:7-8, pages 3231-3245.
Crossref
Crossref
Goutam Kumar Bose & Pritam Pain. 2020. Deep Learning and Neural Networks. Deep Learning and Neural Networks
784
813
.
Deepak Kumar, Shakti Kumar, Dheeraj Kumar & Nirmal Kumar Singh. 2020. Advances in Materials and Manufacturing Engineering. Advances in Materials and Manufacturing Engineering
39
48
.
Mohak Sheth, Nisarg Sheth, Nishil Radadia, Sohil Parsana, Vimal Savsani, R K Mishra, M Arivarasu & T Ram Prabhu. (2020) Optimization of WEDM parameters for Mg-Zn-RE-Zr alloy using Passing Vehicle Search algorithm. Materials Research Express 6:12, pages 1265k6.
Crossref
Crossref
Bobby Oedy Pramoedyo Soepangkat, Rachmadi Norcahyo, Pathya Rupajati, Mohammad Khoirul Effendi & Helena Carolina Kis Agustin. (2019) Multi-objective optimization in wire-EDM process using grey relational analysis method (GRA) and backpropagation neural network–genetic algorithm (BPNN–GA) methods. Multidiscipline Modeling in Materials and Structures 15:5, pages 1016-1034.
Crossref
Crossref
S. Vijayabhaskar & T. Rajmohan. (2018) Experimental Investigation and Optimization of Machining Parameters in WEDM of Nano-SiC Particles Reinforced Magnesium Matrix Composites. Silicon 11:4, pages 1701-1716.
Crossref
Crossref
Zhi Chen, Zhaojun Yan, Hongzhi Yan & Fenglin Han. (2019) Improvement of the machining characteristics in WEDM based on specific discharge energy and magnetic field–assisted method. The International Journal of Advanced Manufacturing Technology 103:5-8, pages 3033-3044.
Crossref
Crossref
Kashif Ishfaq, Naveed Ahmad, Muhammad Jawad, Muhammad Asad Ali & Abdulrahman M. Al-Ahmari. (2019) Evaluating Material’s Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses. Materials 12:12, pages 1940.
Crossref
Crossref
Abhijit Saha & Subhas Chandra Mondal. (2018) Statistical Analysis and Optimization of Process Parameters in Wire Cut Machining of Welded Nanostructured Hardfacing Material. Silicon 11:3, pages 1313-1326.
Crossref
Crossref
Trung-Thanh Nguyen & Quoc-Dung Duong. (2019) Optimization of WEDM process of mould material using Kriging model to improve technological performances. Sādhanā 44:6.
Crossref
Crossref
Soni Hargovind, Sannayellappa Narendranath & Motagondanahalli Rangarasaiah Ramesh. (2019) Advanced machining of TiNiCo shape memory alloys for biomedical applications. Emerging Materials Research 8:1, pages 14-21.
Crossref
Crossref
Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti & Satish Kumar Sharma. (2018) Multi-objective optimisation of electrical discharge machining for Inconel 825 using Taguchi-fuzzy approach. International Journal of Information Technology 11:1, pages 97-105.
Crossref
Crossref
G. Selvakumar, K. G. Thiruppathi Kuttalingam & S. Ram Prakash. (2018) Investigation on machining and surface characteristics of AA5083 for cryogenic applications by adopting trim cut in WEDM. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:5.
Crossref
Crossref
M Sreenivasa Rao & N Venkaiah. (2016) Experimental investigations on surface integrity issues of Inconel-690 during wire-cut electrical discharge machining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:4, pages 731-741.
Crossref
Crossref
Jaksan D Patel & Kalpesh D Maniya. (2018) A Review on: Wire cut electrical discharge machining process for metal matrix composite. Procedia Manufacturing 20, pages 253-258.
Crossref
Crossref
M. Sreenivasa Rao, A. Venkata Naresh Babu & N. Venkaiah. (2018) Modified Flower Pollination Algorithm to Optimize WEDM parameters while Machining Inconel-690 alloy. Materials Today: Proceedings 5:2, pages 7864-7872.
Crossref
Crossref
Wuyi Ming, Zhen Zhang, Shengyong Wang, Hao Huang, Yanming Zhang, Yong Zhang & Dili Shen. (2017) Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11. The International Journal of Advanced Manufacturing Technology 92:9-12, pages 4039-4056.
Crossref
Crossref
Abhijit Saha & Subhas Chandra Mondal. (2016) Experimental investigation and modelling of WEDM process for machining nano-structured hardfacing material. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:9, pages 3439-3455.
Crossref
Crossref
M. Sreenivasa Rao & N. Venkaiah. (2016) A modified cuckoo search algorithm to optimize Wire-EDM process while machining Inconel-690. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:5, pages 1647-1661.
Crossref
Crossref
Goutam Kumar Bose & Pritam Pain. 2017. Handbook of Research on Soft Computing and Nature-Inspired Algorithms. Handbook of Research on Soft Computing and Nature-Inspired Algorithms
489
519
.
Abhijit Saha & Subhas Chandra Mondal. 2017. Research into Design for Communities, Volume 1. Research into Design for Communities, Volume 1
905
917
.
Wuyi Ming, Jun Ma, Zhen Zhang, Hao Huang, Dili Shen, Guojun Zhang & Yu Huang. (2016) Soft computing models and intelligent optimization system in electro-discharge machining of SiC/Al composites. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Zhen Zhang, Wuyi Ming, Hao Huang, Zhi Chen, Zhong Xu, Yu Huang & Guojun Zhang. (2015) Optimization of process parameters on surface integrity in wire electrical discharge machining of tungsten tool YG15. The International Journal of Advanced Manufacturing Technology 81:5-8, pages 1303-1317.
Crossref
Crossref
Wuyi Ming, Junjian Hou, Zhen Zhang, Hao Huang, Zhong Xu, Guojun Zhang & Yu Huang. (2015) Integrated ANN-LWPA for cutting parameter optimization in WEDM. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Zhi Chen, Yu Huang, Hao Huang, Zhen Zhang & Guojun Zhang. (2015) Three-dimensional characteristics analysis of the wire-tool vibration considering spatial temperature field and electromagnetic field in WEDM. International Journal of Machine Tools and Manufacture 92, pages 85-96.
Crossref
Crossref
Youmin Rong, Zhen Zhang, Guojun Zhang, Chen Yue, Yafei Gu, Yu Huang, Chunming Wang & Xinyu Shao. (2015) Parameters optimization of laser brazing in crimping butt using Taguchi and BPNN-GA. Optics and Lasers in Engineering 67, pages 94-104.
Crossref
Crossref
A. Varun & Nasina Venkaiah. (2014) Simultaneous optimization of WEDM responses using grey relational analysis coupled with genetic algorithm while machining EN 353. The International Journal of Advanced Manufacturing Technology 76:1-4, pages 675-690.
Crossref
Crossref
F.S. Lobato, M.N. Sousa, M.A. Silva & A.R. Machado. (2014) Multi-objective optimization and bio-inspired methods applied to machinability of stainless steel. Applied Soft Computing 22, pages 261-271.
Crossref
Crossref
Zhi Chen, Yu Huang, Zhen Zhang, He Li, Wu yi Ming & Guojun Zhang. (2014) An analysis and optimization of the geometrical inaccuracy in WEDM rough corner cutting. The International Journal of Advanced Manufacturing Technology 74:5-8, pages 917-929.
Crossref
Crossref