Citations (31)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Kunal Arora & Anant Kumar Singh. (2023) Magnetorheological finishing process for improved performance of polymer gears. Materials and Manufacturing Processes 38:10, pages 1191-1208.
Read now
Read now
Fabio Scherillo, Antonello Astarita, Umberto Prisco & Antonino Squillace. (2018) Selective electrochemical machining of the steel molds in hot isostatic pressing of Ti6Al4V powder. Materials and Manufacturing Processes 33:14, pages 1587-1593.
Read now
Read now
Anand C. Petare & Neelesh Kumar Jain. (2018) Improving spur gear microgeometry and surface finish by AFF process. Materials and Manufacturing Processes 33:9, pages 923-934.
Read now
Read now
S. Pathak & N. K. Jain. (2017) Critical review of electrochemical honing: sustainable and alternative gear finishing process. Part 2: effects of various process parameters on surface characteristics and material removal rate. Transactions of the IMF 95:5, pages 241-254.
Read now
Read now
Sunil Pathak, N. K. Jain & I. A. Palani. (2017) Effect of applied voltage and electrolyte parameters on pitch, runout, flank topology, and finishing productivity of the straight bevel gears in PECH process. Materials and Manufacturing Processes 32:3, pages 339-347.
Read now
Read now
S. Pathak, N. K. Jain & I. A. Palani. (2016) Experimental investigations on redefining the surface quality of bevel gears by pulsed electrochemical honing. Transactions of the IMF 94:2, pages 64-69.
Read now
Read now
Sunil Pathak, Neelesh Kumar Jain & I. A. Palani. (2015) Process Performance Comparison of ECH and PECH for Quality Enhancement of Bevel Gears. Materials and Manufacturing Processes 30:7, pages 836-841.
Read now
Read now
Sunil Pathak, N.K. Jain & I.A. Palani. (2014) On Use of Pulsed-Electrochemical Honing to Improve Micro-Geometry of Bevel Gears. Materials and Manufacturing Processes 29:11-12, pages 1461-1469.
Read now
Read now
Articles from other publishers (23)
Baocai Zhang, Sufang Shi, Xiayu Wang & Xinchang Wang. (2023) Machinability and mechanism of abrasive flow machining ultra-precision surface with orientated grinding marks. Journal of Materials Research and Technology 27, pages 4787-4800.
Crossref
Crossref
Xiong Liang, Zehang Liu, Jianan Fu, Heting Zhang, Jinbiao Huang, Shuai Ren, Zhenxuan Zhang, Qing Chen, Yong Xiao, Wenqing Ruan & Jiang Ma. (2023) Dissolvable templates to prepare Pt-based porous metallic glass for the oxygen reduction reaction. Nanoscale 15:14, pages 6802-6811.
Crossref
Crossref
Sohini Chowdhury, N. Yadaiah, Chander Prakash, Seeram Ramakrishna, Saurav Dixit, Lovi Raj Gupta & Dharam Buddhi. (2022) Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling. Journal of Materials Research and Technology 20, pages 2109-2172.
Crossref
Crossref
Kunal Arora & Anant Kumar Singh. (2021) Theoretical and experimental investigation on surface roughness of straight bevel gears using a novel magnetorheological finishing process. Wear 476, pages 203693.
Crossref
Crossref
Anand Petare, Neelesh Kumar Jain & I. A. Palani. 2021. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
95
104
.
Sunny Diyaley & Shankar Chakraborthy. (2020) An Analysis on the Parametric Optimization of Electrochemical Honing Process. Journal of Advanced Manufacturing Systems 19:02, pages 249-276.
Crossref
Crossref
Anand C. Petare, Neelesh Kumar Jain & I. A. Palani. 2020. Advances in Unconventional Machining and Composites. Advances in Unconventional Machining and Composites
101
111
.
Klaudio Bari & Arun Arjunan. (2019) Extra low interstitial titanium based fully porous morphological bone scaffolds manufactured using selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials 95, pages 1-12.
Crossref
Crossref
Anand C. Petare, Ankit Mishra, I. A. Palani & N. K. Jain. (2018) Study of laser texturing assisted abrasive flow finishing for enhancing surface quality and microgeometry of spur gears. The International Journal of Advanced Manufacturing Technology 101:1-4, pages 785-799.
Crossref
Crossref
Shunyu Liu & Yung C. Shin. (2019) Additive manufacturing of Ti6Al4V alloy: A review. Materials & Design 164, pages 107552.
Crossref
Crossref
Huaiju Liu, Heli Liu, Caichao Zhu & Ye Zhou. (2019) A Review on Micropitting Studies of Steel Gears. Coatings 9:1, pages 42.
Crossref
Crossref
Kaushik Kumar, Divya Zindani & J. Paulo DavimKaushik Kumar, Divya Zindani & J. Paulo Davim. 2018. Advanced Machining and Manufacturing Processes. Advanced Machining and Manufacturing Processes
153
166
.
N.K. Jain & S. Pathak. 2017. Comprehensive Materials Finishing. Comprehensive Materials Finishing
358
380
.
H. Singh & P. K. Jain. (2016) Influence of ultrasonic vibrations on process performance of electrochemical honing. The International Journal of Advanced Manufacturing Technology 87:1-4, pages 1057-1066.
Crossref
Crossref
A. A. Shapiro, J. P. Borgonia, Q. N. Chen, R. P. Dillon, B. McEnerney, R. Polit-Casillas & L. Soloway. (2016) Additive Manufacturing for Aerospace Flight Applications. Journal of Spacecraft and Rockets 53:5, pages 952-959.
Crossref
Crossref
Sunil Pathak, N. K. Jain & I. A Palani. (2016) Investigations on surface quality, surface integrity and specific energy consumption in finishing of straight bevel gears by PECH process. The International Journal of Advanced Manufacturing Technology 85:9-12, pages 2207-2222.
Crossref
Crossref
Zdeněk Aleš, Jindřich Pavlů, Miroslav Müller, Jaroslava Svobodová, Anatolii Lebedev, Alexander Yurov, Martin Pexa & Miloslav Linda. (2016) Influence of Abrasive - Free Ultrasonic Finishing Process of Steel on Wear. Manufacturing Technology 16:1, pages 4-12.
Crossref
Crossref
Kapil Gupta, Neelesh K. Jain & R. F. LaubscherKapil Gupta, Neelesh K. Jain & R. F. Laubscher. 2016. Hybrid Machining Processes. Hybrid Machining Processes
9
32
.
Sunil Pathak, Neelesh Kumar Jain & I.A. Palani. (2015) On Surface Quality and Wear Resistance of Straight Bevel Gears Finished by Pulsed Electrochemical Honing Process. International Journal of Electrochemical Science 10:11, pages 8869-8885.
Crossref
Crossref
Xiaolei Chen, Ningsong Qu & Hansong Li. (2015) Improvement of dimensional uniformity on micro-dimple arrays generated by electrochemical micro-machining with an auxiliary electrode. The International Journal of Advanced Manufacturing Technology 80:9-12, pages 1577-1585.
Crossref
Crossref
Jaroslava Svobodová, Pavel Kraus, Miroslav Müller, Anatolii Lebedev, Alexander Yurov & Pavel Lebedev. (2015) Influence of Cutting Fluid on Abrasive - Free Ultrasonic Finishing of Aluminium Alloy. Manufacturing Technology 15:4, pages 710-714.
Crossref
Crossref
Zhengyang Xu, Jia Liu, Qing Xu, Ting Gong, Dong Zhu & Ningsong Qu. (2015) The tool design and experiments on electrochemical machining of a blisk using multiple tube electrodes. The International Journal of Advanced Manufacturing Technology 79:1-4, pages 531-539.
Crossref
Crossref
G. Venkatesh, Apurbba Kumar Sharma & Pradeep Kumar. (2015) On ultrasonic assisted abrasive flow finishing of bevel gears. International Journal of Machine Tools and Manufacture 89, pages 29-38.
Crossref
Crossref