Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 29, 2014 - Issue 2
Submit an article Journal homepage
559
Views
37
CrossRef citations to date
0
Altmetric
Original Articles

Simulation and Experimental Observations of Effect of Different Contact Interfaces on the Incremental Sheet Forming Process

Yanle Li School of Mechanical & Mining Engineering, The University of Queensland, St Lucia, Brisbane, AustraliaCorrespondence[email protected].
,
Zhaobing Liu School of Mechanical & Mining Engineering, The University of Queensland, St Lucia, Brisbane, Australia
,
W.J.T.(Bill) Daniel School of Mechanical & Mining Engineering, The University of Queensland, St Lucia, Brisbane, Australia
&
P. A. Meehan School of Mechanical & Mining Engineering, The University of Queensland, St Lucia, Brisbane, Australia
Pages 121-128 | Received 22 Feb 2013, Accepted 26 Jun 2013, Published online: 04 Mar 2014

Citations (37)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (7)

Honggang Duan, Tingyu Ge, Wenke Bao, Xingrong Chu, He Li & Dongwei Ao. (2023) Electric Hot Single Point Incremental Forming Process of Ti6Al4V Alloy Sheet with Water-Cooled Forming Tool. Integrated Ferroelectrics 234:1, pages 143-151.
Read now
Kamel Bensaid, Ridha Souissi, Atef Boulila, Mahfoudh Ayadi & Nabil Ben Fredj. (2023) Numerical investigation of incremental forming process of AISI 304 stainless steel. Ironmaking & Steelmaking 50:2, pages 174-183.
Read now
Rohit A. Magdum & Pandivelan Chinnaiyan. (2022) A critical review of incremental sheet forming in view of process parameters and process output. Advances in Materials and Processing Technologies 8:2, pages 2039-2068.
Read now
Kumar G Praveen & Suresh Kurra. (2021) Analysis of deformation behavior in various incremental tube forming processes. Materials and Manufacturing Processes 36:14, pages 1631-1641.
Read now
A. Formisano, L. Boccarusso, F. Capece Minutolo, L. Carrino, M. Durante & A. Langella. (2017) Negative and positive incremental forming: Comparison by geometrical, experimental, and FEM considerations. Materials and Manufacturing Processes 32:5, pages 530-536.
Read now
K. A. Al-Ghamdi & G. Hussain. (2016) SPIF of Cu/Steel Clad Sheet: Annealing Effect on Bond Force and Formability. Materials and Manufacturing Processes 31:6, pages 758-763.
Read now
H. Khalatbari, A. Iqbal, Xiaofan Shi, Lin Gao, G. Hussain & M. Hashemipour. (2015) High-Speed Incremental Forming Process: A Trade-Off Between Formability and Time Efficiency. Materials and Manufacturing Processes 30:11, pages 1354-1363.
Read now

Articles from other publishers (30)

Hyung-Rim Lee, Myoung-Gyu Lee & Namsu Park. (2023) Effect of evolutionary anisotropic hardening on the prediction of deformation and forming load in incremental sheet forming simulation. Thin-Walled Structures 193, pages 111231.
Crossref
K. S. Rudramamba, M. Rami Reddy & Mamatha Nakka. 2023. Handbook of Flexible and Smart Sheet Forming Techniques. Handbook of Flexible and Smart Sheet Forming Techniques 1 14 .
Tyler J. Grimm, Filipe Colombini & Ihab Ragai. (2023) Numerical Investigation of Step Size Effect on Formability of 2024-T3 Aluminum in Incremental Forming. Journal of Manufacturing and Materials Processing 7:2, pages 70.
Crossref
Fuyuan Liu, Yanle Li, Hao Yuan, Riwen Sun, Fangyi Li & Jianfeng Li. (2022) Comprehensive modeling of forming forces in three directions for incremental sheet forming process based on the contact area. Journal of Manufacturing Processes 84, pages 986-1000.
Crossref
Gangaram Mandaloi, Aniket Nagargoje, Ankit Kumar Gupta, Gaurabh Banerjee, Harshal Y. Shahare & Puneet Tandon. (2022) A Comprehensive Review on Experimental Conditions, Strategies, Performance, and Applications of Incremental Forming for Deformation Machining. Journal of Manufacturing Science and Engineering 144:11.
Crossref
Hyungrim Lee, Namsu Park, Minki Kim, Myoung-Gyu Lee & Jung Han Song. (2022) Recent Developments and Trends in Flexible Forming Technology. International Journal of Automotive Technology 23:3, pages 741-763.
Crossref
Pavan Kumar & Puneet Tandon. (2022) Investigating the capability of the Lemaitre damage model to establish the incremental sheet forming process. Archives of Civil and Mechanical Engineering 22:2.
Crossref
Pawan Bishnoi & Pankaj Chandna. (2022) Formability of Aluminum Alloys During Single Point Incremental Forming. International Journal of Manufacturing, Materials, and Mechanical Engineering 12:1, pages 1-26.
Crossref
Jaekwang Shin, Dohyun Leem, Newell Moser, Ankush Bansal, Randy Cheng, Kornel Ehmann, Jian Cao, Alan Taub & Mihaela Banu. 2022. NUMISHEET 2022. NUMISHEET 2022 141 154 .
Sherwan Mohammed Najm & Imre Paniti. (2021) Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF. The International Journal of Advanced Manufacturing Technology 114:9-10, pages 2591-2615.
Crossref
Ashish Gohil & Bharat Modi. (2020) Review of the effect of process parameters on performance measures in the incremental sheet forming process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:3, pages 303-332.
Crossref
Zinan Cheng, Yanle Li, Changxu Xu, Yuanyu Liu, Shahid Ghafoor & Fangyi Li. (2020) Incremental sheet forming towards biomedical implants: a review. Journal of Materials Research and Technology 9:4, pages 7225-7251.
Crossref
Rasoul Esmaeilpour, Hyunki Kim, Taejoon Park, Farhang Pourboghrat, Akshat Agha & Fadi Abu-Farha. (2020) Effect of hardening law and process parameters on finite element simulation of single point incremental forming (SPIF) of 7075 aluminum alloy sheet. Mechanics & Industry 21:3, pages 302.
Crossref
Yanle Li, Weidong Zhai, Zijian Wang, Xiaoqiang Li, Lingling Sun, Jianfeng Li & Guoqun Zhao. (2020) Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves. Journal of Materials Research and Technology 9:1, pages 433-454.
Crossref
Dongwei Ao, Xingrong Chu, Jun Gao, Yang Yang & Shuxia Lin. (2019) Experimental investigation on the deformation behaviors of Ti-6Al-4V sheet in electropulsing-assisted incremental forming. The International Journal of Advanced Manufacturing Technology 104:9-12, pages 4243-4254.
Crossref
Ajay Kumar, Vishal Gulati, Parveen Kumar & Hari Singh. (2019) Forming force in incremental sheet forming: a comparative analysis of the state of the art. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:6.
Crossref
Swagatika Mohanty, Srinivasa Prakash Regalla & Y. V. Daseswara Rao. (2019) Robot-assisted incremental sheet metal forming under the different forming condition. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:2.
Crossref
Tyler J. Grimm & Ihab Ragai. (2019) An investigation of liquid metal lubrication during electrically-assisted incremental forming of titanium. Procedia Manufacturing 34, pages 118-124.
Crossref
Ajay Kumar, Vishal Gulati, Parveen Kumar, Vinay Singh, Brijesh Kumar & Hari Singh. (2019) Parametric effects on formability of AA2024-O aluminum alloy sheets in single point incremental forming. Journal of Materials Research and Technology 8:1, pages 1461-1469.
Crossref
AJAY KUMAR & VISHAL GULATI. (2018) Experimental investigations and optimization of forming force in incremental sheet forming. Sādhanā 43:10.
Crossref
Mariem Dakhli, Atef Boulila & Zoubeir Tourki. (2017) Effect of generatrix profile on single-point incremental forming parameters. The International Journal of Advanced Manufacturing Technology 93:5-8, pages 2505-2516.
Crossref
Yanle Li, Xiaoxiao Chen, Zhaobing Liu, Jie Sun, Fangyi Li, Jianfeng Li & Guoqun Zhao. (2017) A review on the recent development of incremental sheet-forming process. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 2439-2462.
Crossref
Haibo Lu, Michael Kearney, Sheng Liu, William J.T. Daniel & Paul A. Meehan. (2016) Two-directional toolpath correction in single-point incremental forming using model predictive control. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 91-106.
Crossref
Seyed Ali Asghar Asghari, Asghar Shamsi Sarband & Mostafa Habibnia. (2017) Optimization of multiple quality characteristics in two-point incremental forming of aluminum 1050 by grey relational analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pages 095440621769365.
Crossref
Tyler J. Grimm, Ihab Ragai & John T. Roth. (2017) A Novel Modification to the Incremental Forming Process, Part 2: Validation of the Multi-directional Tooling Method. Procedia Manufacturing 10, pages 520-530.
Crossref
Tyler J. Grimm, Ihab Ragai & John T. Roth. (2017) A Novel Modification to the Incremental Forming Process, Part 1: Multi-directional Tooling. Procedia Manufacturing 10, pages 510-519.
Crossref
Tegan McAnulty, Jack Jeswiet & Matthew Doolan. (2017) Formability in single point incremental forming: A comparative analysis of the state of the art. CIRP Journal of Manufacturing Science and Technology 16, pages 43-54.
Crossref
Yanle Li, William J. T. Daniel & Paul A. Meehan. (2016) Deformation analysis in single-point incremental forming through finite element simulation. The International Journal of Advanced Manufacturing Technology 88:1-4, pages 255-267.
Crossref
Mohammad Riahi, Mohammad Sedighi & Hassan Rahmanian. (2015) Investigation of magnetic actuator as a hammer in metal forming. The International Journal of Advanced Manufacturing Technology 85:5-8, pages 1117-1124.
Crossref
Yanle Li, William J.T. Daniel, Zhaobing Liu, Haibo Lu & Paul A. Meehan. (2015) Deformation mechanics and efficient force prediction in single point incremental forming. Journal of Materials Processing Technology 221, pages 100-111.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.