Citations (64)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Nishant K. Singh, Lalit Yadav & Sachin Lal. (2022) Experimental investigation for sustainable electric discharge machining with Pongamia and Jatropha as dielectric medium. Advances in Materials and Processing Technologies 8:2, pages 1447-1466.
Read now
Read now
Shrihar Pandey, Pankaj Kumar Shrivastava, Shivam Dangi & Pushpendra Singh. (2022) Experimental modelling and optimisation of electrical arc machining of Al-B4C metal matrix composite. Australian Journal of Mechanical Engineering 20:1, pages 245-255.
Read now
Read now
Ming Li, Zhuojun Yang, Hang Dong, Yu Zhou & Yonghong Liu. (2020) Machining performance of high energy die-sinking electrical discharge machining on GH2132. Materials and Manufacturing Processes 35:9, pages 1024-1031.
Read now
Read now
Fei Wang, Qingda Wu & Zilong Peng. (2020) Processing of heat-treated steel by arc discharge machining. Materials and Manufacturing Processes 35:1, pages 104-112.
Read now
Read now
Hang Dong, Yonghong Liu, Ming Li, Yu Zhou, Tong Liu, Dege Li, Qiang Sun & Renjie Ji. (2019) Experimental investigation of water-in-oil nanoemulsion in sinking electrical discharge machining. Materials and Manufacturing Processes 34:10, pages 1129-1135.
Read now
Read now
Siddhartha Kar & Promod Kumar Patowari. (2018) Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review. Materials and Manufacturing Processes 33:14, pages 1491-1517.
Read now
Read now
B. P. Mishra & B. C. Routara. (2018) Impact of induction hardened workpiece hardness on EDM performance. Materials and Manufacturing Processes 33:6, pages 626-633.
Read now
Read now
Nitin D. Misal, Atul R. Saraf & Mudigonda Sadaiah. (2017) Experimental investigation of surface topography in photochemical machining of Inconel 718. Materials and Manufacturing Processes 32:15, pages 1756-1763.
Read now
Read now
Jian Liu, Hany Hassanin, Zhenyu Ni, Yi Yang, Gang Yang & Kyle Jiang. (2017) Production of high-precision micro metallic components by electroforming process. Materials and Manufacturing Processes 32:12, pages 1325-1330.
Read now
Read now
Gangadharudu Talla, S. Gangopadhyay & C. K. Biswas. (2017) Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625. Particulate Science and Technology 35:2, pages 219-226.
Read now
Read now
Amitava Mandal, Amit Rai Dixit, Alok Kumar Das & Niladri Mandal. (2016) Modeling and Optimization of Machining Nimonic C-263 Superalloy using Multicut Strategy in WEDM. Materials and Manufacturing Processes 31:7, pages 860-868.
Read now
Read now
Yang Shen, Yonghong Liu, Yanzhen Zhang, Hang Dong, Pengfei Sun, Xiaolong Wang, Chao Zheng & Renjie Ji. (2016) Effects of an Electrode Material on a Novel Compound Machining of Inconel718. Materials and Manufacturing Processes 31:7, pages 845-851.
Read now
Read now
L. Li, X. T. Wei, G. M. Zheng, L. Y. Li & C. S. Dai. (2016) Electroforming of TiB2-Reinforced Copper Matrix Electrode for EDM. Materials and Manufacturing Processes 31:6, pages 776-780.
Read now
Read now
Janak B. Valaki & Pravin P. Rathod. (2016) Investigating Feasibility Through Performance Analysis of Green Dielectrics for Sustainable Electric Discharge Machining. Materials and Manufacturing Processes 31:4, pages 541-549.
Read now
Read now
L. Li, Z. W. Niu & G. M. Zheng. (2016) Ultrasonic Electrodeposition of Cu–SiC Electrodes for EDM. Materials and Manufacturing Processes 31:1, pages 37-41.
Read now
Read now
Dong Lu, Qiang Wang, Yongbo Wu, Jianguo Cao & Huiru Guo. (2015) Fundamental Turning Characteristics of Inconel 718 by Applying Ultrasonic Elliptical Vibration on the Base Plane. Materials and Manufacturing Processes 30:8, pages 1010-1017.
Read now
Read now
L. Li, Z. Y. Li, X. T. Wei & X. Cheng. (2015) Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM. Materials and Manufacturing Processes 30:8, pages 968-973.
Read now
Read now
Aveek Mohanty, Gangadharudu Talla & S. Gangopadhyay. (2014) Experimental Investigation and Analysis of EDM Characteristics of Inconel 825. Materials and Manufacturing Processes 29:5, pages 540-549.
Read now
Read now
Articles from other publishers (46)
Kelin Li, Xiaoka Wang, Lijie Jiang, K.P. Rajurkar, Wansheng Zhao & Lin Gu. (2024) Study of arc behavior and machining effects of the novel magnetic field assisted blasting erosion arc machining method. Journal of Materials Processing Technology 323, pages 118227.
Crossref
Crossref
Xinlei Wu, Yonghong Liu, Xuexin Zhang, Dege Li & Baoping Cai. (2023) Mathematical Models and System of Intelligent Servo for High-Efficiency Electrical Discharge Assisted Arc Milling on Difficult-to-Cut Materials. IEEE Transactions on Systems, Man, and Cybernetics: Systems 53:9, pages 5821-5830.
Crossref
Crossref
Ekta Shrivastava, Pankaj Kumar Shrivastava, Pushpendra Singh, Subhash Gautam & Abhijeet Singh. (2023) AI based modeling & optimization of arc machining of Ti–6Al–4V alloy using ANN-evolutionary algorithm. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Zenan Yang, Lu Liu, Jianbin Wang, Junjie Xu, Wanrong Zhao, Liyuan Zhou, Feng He & Zhijun Wang. (2023) Revealing the Formation of Recast Layer around the Film Cooling Hole in Superalloys Fabricated Using Electrical Discharge Machining. Metals 13:4, pages 695.
Crossref
Crossref
Guo-Jian He, Lin Gu, Ying-Mou Zhu, Ji-Peng Chen, Wan-Sheng Zhao & K. P. Rajurkar. (2022) Electrical arc contour cutting based on a compound arc breaking mechanism. Advances in Manufacturing 10:4, pages 583-595.
Crossref
Crossref
Mahir Akgün. (2022) Performance analysis of electrode materials in electro discharge machining of monel K-500. Surface Topography: Metrology and Properties 10:3, pages 035026.
Crossref
Crossref
Meltem Altin Karataş. (2022) Wire EDM cutting of Inconel 718 nickel-based superalloy: kerf and MRR analysis. Multidiscipline Modeling in Materials and Structures 18:4, pages 653-672.
Crossref
Crossref
Hang Dong, Weixin Gong, Ruming Zhao & Jianping Zhou. (2022) Gas-assisted green and efficient compound sinking machining of nickel-based alloy. Journal of Manufacturing Processes 79, pages 544-552.
Crossref
Crossref
Binoy Kumar Baroi, Jagadish & Promod Kumar Patowari. (2022) A review on sustainability, health, and safety issues of electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:2.
Crossref
Crossref
Subhash Gautam, Pushpendra Singh & Pankaj Kumar Shrivastava. (2021)
Modeling and optimization of VEAM of 10% B
4
C/Al metal matrix composite using ANN-SCA approach
. Engineering Research Express 3:3, pages 035023.
Crossref
Crossref
S. A. Mullya, G. Karthikeyan & V. S. Ganachari. (2021) Electric discharge milling: a state-of-the-art review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:9.
Crossref
Crossref
Yuchao JIA, Guanxin CHI, Yang SHEN, Kun ZHANG, Zhenlong WANG & Yukui WANG. (2021) Electrode design using revolving entity extraction for high-efficiency electric discharge machining of integral shrouded blisk. Chinese Journal of Aeronautics 34:6, pages 178-187.
Crossref
Crossref
Hatice Varol Ozkavak, Mehmet Mahir Sofu, Burhan Duman & Selim Bacak. (2021) Estimating surface roughness for different EDM processing parameters on Inconel 718 using GEP and ANN. CIRP Journal of Manufacturing Science and Technology 33, pages 306-314.
Crossref
Crossref
Jan Burek, Robert Babiarz, Jarosław Buk, Paweł Sułkowicz & Krzysztof Krupa. (2021) The Accuracy of Finishing WEDM of Inconel 718 Turbine Disc Fir Tree Slots. Materials 14:3, pages 562.
Crossref
Crossref
Yao Li, Cheng Cui, Bengang Lin & Li Li. (2020) Machining Characteristics of IN718 by EDM with Cooled Electrode and Vibration of the Workpiece. Materials Science Forum 996, pages 131-136.
Crossref
Crossref
Xuexin Zhang, Yonghong Liu, Xinlei Wu & Zhenwei Niu. (2019) Intelligent pulse analysis of high-speed electrical discharge machining using different RNNs. Journal of Intelligent Manufacturing 31:4, pages 937-951.
Crossref
Crossref
Shrihar Pandey & Pankaj K Shrivastava. (2019)
Vibration-assisted electrical arc machining of 10% B
4
C/Al metal matrix composite
. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:6, pages 1156-1170.
Crossref
Crossref
Ch. Shekar, K. Kishore & P. Laxminarayana. (2020) Material removal rate and surface roughness on machining of Inconel 718 by electrical discharge machine using Taguchi technique. Materials Today: Proceedings 27, pages 1024-1029.
Crossref
Crossref
Deepak Kumar, Shakti Kumar, Dheeraj Kumar & Nirmal Kumar Singh. 2020. Advances in Materials and Manufacturing Engineering. Advances in Materials and Manufacturing Engineering
39
48
.
Hang Dong, Yonghong Liu, Ming Li, Tong Liu, Yu Zhou, Dege Li & Yang Shen. (2019) High-speed compound sinking machining of Inconel 718 using water in oil nanoemulsion. Journal of Materials Processing Technology 274, pages 116271.
Crossref
Crossref
Venkatesan Kannan, Devendiran Sundararajan, Abhishek Chahal & Devesh Raj. Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment. Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment.
Pankaj Kumar Shrivastava, Shrihar Pandey & Shivam Dangi. (2019) Electrical arc machining: Process capabilities and current research trends. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:15, pages 5190-5200.
Crossref
Crossref
Vikas Sharma, Joy Prakash Misra & Piyush Singhal. (2019) Multi-Optimization of Process parameters for Inconel 718 While Die-Sink EDM Using Multi-Criterion Decision Making Methods. Journal of Physics: Conference Series 1240:1, pages 012166.
Crossref
Crossref
Ahmad Farhadi, Yingmou Zhu, Lin Gu & Wansheng Zhao. (2019) Electric arc sweep milling of open channels. The International Journal of Advanced Manufacturing Technology 102:1-4, pages 673-683.
Crossref
Crossref
Jonas Holmberg, Johan Berglund, Anders Wretland & Tomas Beno. (2018) Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1575-1591.
Crossref
Crossref
Santosh Kumar Sahu, Thrinadh Jadam & Saurav Datta. (2019) Performance of dielectric media (conventional EDM oil and distilled water) during machining of Inconel 825 super alloy. Materials Today: Proceedings 18, pages 2679-2687.
Crossref
Crossref
Vikas Sharma, Joy Prakash Misra & Piyush Singhal. (2019) Optimization of process parameters on Combustor Material Using Taguchi & MCDM Method in Electro-Discharge Machining (EDM). Materials Today: Proceedings 18, pages 2672-2678.
Crossref
Crossref
S. Rajamanickam & J. Prasanna. 2019. Advances in Manufacturing Processes. Advances in Manufacturing Processes
163
173
.
Jipeng Chen, Lin Gu, Yingmou Zhu & Wansheng Zhao. (2017) High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:12, pages 2226-2235.
Crossref
Crossref
Wansheng Zhao, Lin Gu, Fawang Zhang & K.P. Rajurkar. (2018) Modeling study of the hydrodynamic arc breaking mechanism in BEAM. CIRP Annals 67:1, pages 189-192.
Crossref
Crossref
Hui Xu, Lin Gu, Wansheng Zhao, Jipeng Chen & Fawang Zhang. (2015) Influence of flushing holes on the machining performance of blasting erosion arc machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:11, pages 1949-1960.
Crossref
Crossref
Yang Shen, Yonghong Liu, Hang Dong, Kun Zhang, Lin Lv, Xianzhi Zhang, Xinlei Wu, Chao Zheng & Renjie Ji. (2016) Surface integrity of Inconel 718 in high-speed electrical discharge machining milling using air dielectric. The International Journal of Advanced Manufacturing Technology 90:1-4, pages 691-698.
Crossref
Crossref
C. J. Li, J. J. Ding, S. Q. Yang, Y. S. Fang & Q. C. Kong. (2016) Discharge current shape control method and experiment in wire EDM. The International Journal of Advanced Manufacturing Technology 87:9-12, pages 3271-3278.
Crossref
Crossref
Lin Gu, Jipeng Chen, Hui Xu & Wansheng Zhao. (2016) Blasting erosion arc machining of 20 vol.% SiC/Al metal matrix composites. The International Journal of Advanced Manufacturing Technology 87:9-12, pages 2775-2784.
Crossref
Crossref
C. J. Li, Y. Li, H. Tong, L. Zhao, Q. C. Kong & Z. Q. Wang. (2016) An EDM pulse power generator and its feasible experiments for drilling film cooling holes. The International Journal of Advanced Manufacturing Technology 87:5-8, pages 1813-1821.
Crossref
Crossref
L. Li, F. Q. Bi, L. Feng & X. Bai. (2015) Effect of low-temperature gas-cooled electrode on the performance of EDM process. The International Journal of Advanced Manufacturing Technology 86:1-4, pages 717-722.
Crossref
Crossref
Yang Shen, Yonghong Liu, Yanzhen Zhang, Hang Dong, Xiaolong Wang, Chao Zheng, Guangxu Wang & Renjie Ji. (2015) High-throughput electrical discharge milling of WC–8%Co. The International Journal of Advanced Manufacturing Technology 82:5-8, pages 1071-1078.
Crossref
Crossref
H. Dong, Y. Liu, Y. Shen & X. Wang. (2016) Optimizing Machining Parameters of Compound Machining of Inconel718. Procedia CIRP 42, pages 51-56.
Crossref
Crossref
Lin Gu, Fawang Zhang, Wansheng Zhao, K.P. Rajurkar & A.P. Malshe. (2016) Investigation of hydrodynamic arc breaking mechanism in blasting erosion arc machining. CIRP Annals 65:1, pages 233-236.
Crossref
Crossref
Yang Shen, Yonghong Liu, Wanyun Sun, Hang Dong, Yanzhen Zhang, Xiaolong Wang, Chao Zheng & Renjie Ji. (2015) High-speed dry compound machining of Ti6Al4V. Journal of Materials Processing Technology 224, pages 200-207.
Crossref
Crossref
A. Torres, C. J. Luis & I. Puertas. (2015) Analysis of the influence of EDM parameters on surface finish, material removal rate, and electrode wear of an INCONEL 600 alloy. The International Journal of Advanced Manufacturing Technology 80:1-4, pages 123-140.
Crossref
Crossref
Hui Xu, Lin Gu, Jipeng Chen, Jing Hu & Wansheng Zhao. (2015) Machining characteristics of nickel-based alloy with positive polarity blasting erosion arc machining. The International Journal of Advanced Manufacturing Technology 79:5-8, pages 937-947.
Crossref
Crossref
Yang Shen, Yonghong Liu, Yanzhen Zhang, Hang Dong, Wanyun Sun, Xiaolong Wang, Chao Zheng & Renjie Ji. (2015) High-speed dry electrical discharge machining. International Journal of Machine Tools and Manufacture 93, pages 19-25.
Crossref
Crossref
Wansheng Zhao, Hui Xu, Lin Gu, Han Hong & K.P. Rajurkar. (2015) Influence of polarity on the performance of Blasting Erosion Arc Machining. CIRP Annals 64:1, pages 213-216.
Crossref
Crossref
Yang Shen, Yong Hong Liu, Hang Dong & Ren Jie Ji. (2014) A Novel Compound Machining of AISI 321 Stainless Steel Using Small Diameter Electrodes. Applied Mechanics and Materials 716-717, pages 36-40.
Crossref
Crossref
L. Li, X.T. Wei & Z.Y. Li. (2014) Surface integrity evolution and machining efficiency analysis of W-EDM of nickel-based alloy. Applied Surface Science 313, pages 138-143.
Crossref
Crossref