Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 28, 2013 - Issue 11
Submit an article Journal homepage
231
Views
19
CrossRef citations to date
0
Altmetric
Original Articles

Development and Application of Hybrid Mold with Microfeatures in Micro-Hot Embossing

Chil-Chyuan Kuo Department of Mechanical Engineering, Ming Chi University of Technology, Taipei, TaiwanCorrespondence[email protected]
&
Hsiu-Ju Hsu Department of Mechanical Engineering, Ming Chi University of Technology, Taipei, Taiwan
Pages 1203-1208 | Received 31 May 2012, Accepted 31 Jul 2013, Published online: 22 Nov 2013

Citations (19)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Swarup S. Deshmukh & Arjyajyoti Goswami. (2021) Recent developments in hot embossing – a review. Materials and Manufacturing Processes 36:5, pages 501-543.
Read now
Yanjun Lu, Fumin Chen, Xiaoyu Wu, Chaolan Zhou, Hang Zhao, Liejun Li & Yong Tang. (2019) Precise WEDM of micro-textured mould for micro-injection molding of hydrophobic polymer surface. Materials and Manufacturing Processes 34:12, pages 1342-1351.
Read now
Ferah Çoğun, Ender Yıldırım & M. A. Sahir Arikan. (2017) Investigation on replication of microfluidic channels by hot embossing. Materials and Manufacturing Processes 32:16, pages 1838-1844.
Read now
Chil-Chyuan Kuo & Ying-Jie Wang. (2014) Development of a Micro-Hot-Embossing Mold with High Replication Fidelity Using Surface Modification. Materials and Manufacturing Processes 29:9, pages 1101-1110.
Read now
Chil-Chyuan Kuo & Hsin-You Liao. (2014) Enhancing the Mechanical Properties of Epoxy Resin Mold by Adding Zirconia Particles. Materials and Manufacturing Processes 29:7, pages 840-847.
Read now

Articles from other publishers (14)

Samaneh Arman & Ismail Lazoglu. (2023) A comprehensive review of injection mold cooling by using conformal cooling channels and thermally enhanced molds. The International Journal of Advanced Manufacturing Technology 127:5-6, pages 2035-2106.
Crossref
Shaofei Jiang, Yuansong Zhang, Haowei Ma, Xiaoqiang Zha, Xiang Peng, Jiquan Li & Chunfu Lu. (2022) Effects of Cavity Thickness on the Replication of Micro Injection Molded Parts with Microstructure Array. Polymers 14:24, pages 5471.
Crossref
Huang Li & Zhilong Xu. (2021) Micro-burrs in machining original molds of an optical functional film with a triangular pyramidal texture. Journal of Micromechanics and Microengineering 31:6, pages 065003.
Crossref
Shaochuan Feng, Amar M. Kamat & Yutao Pei. (2021) Design and fabrication of conformal cooling channels in molds: Review and progress updates. International Journal of Heat and Mass Transfer 171, pages 121082.
Crossref
Chil-Chyuan Kuo & Shin-Yun Lyu. (2017) A cost-effective approach using recycled materials to fabricate micro-hot embossing dies for microfabrication. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 4365-4371.
Crossref
Gulce Kalyoncu & Murat Barisik. (2017) Analytical solution of micro-/nanoscale convective liquid flows in tubes and slits. Microfluidics and Nanofluidics 21:9.
Crossref
Chil-Chyuan Kuo & Ying-Jie Wang. (2017) Optimization of plasma surface modification parameter for fabricating a hot embossing mold with high surface finish. The International Journal of Advanced Manufacturing Technology 91:9-12, pages 3363-3369.
Crossref
Chil-Chyuan Kuo & Teng-Sheng Chiang. (2016) Development of a precision hot embossing tool with microstructures for microfabrication. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 1321-1326.
Crossref
Chil-Chyuan Kuo & Min-Xiang Wu. (2016) Evaluation of service life of silicone rubber molds using vacuum casting. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 3775-3781.
Crossref
Chil-Chyuan Kuo & Bing-Cheng Chen. (2016) Development of hot embossing stamps with conformal cooling channels for microreplication. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2603-2608.
Crossref
C.-C. Kuo & T.-S. Chiang. (2016) Modeling and experimental analysis in lifespan of a precision epoxy resin mold. Materialwissenschaft und Werkstofftechnik 47:9, pages 839-844.
Crossref
Chil-Chyuan Kuo & Ming-Ren Li. (2015) A cost-effective method for rapid manufacturing sheet metal forming dies. The International Journal of Advanced Manufacturing Technology 85:9-12, pages 2651-2656.
Crossref
C. C. Kuo, Y. J. Wang, H. Y. Liao, H. J. Hsu & T. S. Chiang. (2016) The evolution of manufacturing processes for micro-featured epoxy resin mold. Materialwissenschaft und Werkstofftechnik 47:4, pages 341-350.
Crossref
C.-C. Kuo & B.-C. Zhuang. (2016) Manufacturing process development of a precision rapid tooling with high-aspect-ratio micro-sized features. Materialwissenschaft und Werkstofftechnik 47:1, pages 29-36.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.