Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 29, 2014 - Issue 3
Submit an article Journal homepage
351
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

Parametric Study on Electrical Discharge Drilling of Aerospace Nickel Alloy

Umacharn Singh Yadav Directorate General of Aeronautical Quality Assurance, Ministry of Defence, New Delhi, India; Gautam Buddh Technical University, Lucknow, IndiaCorrespondence[email protected]
&
Vinod Yadava Mechanical Engineering Department, Motilal Nehru National Institute of Technology Allahabad, Allahabad, Uttar Pradesh, India
Pages 260-266 | Received 08 Aug 2013, Accepted 19 Oct 2013, Published online: 04 Mar 2014

Citations (16)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. (2019) Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium. Materials and Manufacturing Processes 34:16, pages 1832-1846.
Read now
Vineet Kumar Yadav, Pradeep Kumar & Akshay Dvivedi. (2019) Effect of tool rotation in near-dry EDM process on machining characteristics of HSS. Materials and Manufacturing Processes 34:7, pages 779-790.
Read now
Ved Prakash, Shubham, P. Kumar, P. K. Singh, A. K. Das, S. Chattopadhyaya, A. Mandal & A. R. Dixit. (2018) Surface alloying of miniature components by micro-electrical discharge process. Materials and Manufacturing Processes 33:10, pages 1051-1061.
Read now
Nitin D. Misal, Atul R. Saraf & Mudigonda Sadaiah. (2017) Experimental investigation of surface topography in photochemical machining of Inconel 718. Materials and Manufacturing Processes 32:15, pages 1756-1763.
Read now
Ali Tolga Bozdana & Tugba Ulutas. (2016) The Effectiveness of Multichannel Electrodes on Drilling Blind Holes on Inconel 718 by EDM Process. Materials and Manufacturing Processes 31:4, pages 504-513.
Read now

Articles from other publishers (11)

Param Singh, Vinod Yadava & Audhesh Narayan. (2023) Machining Performance Characteristics of Ti–6Al–4V Alloy Due to Ultrasonic Assisted Micro-EDM Using Rotating Tool Electrode. Journal of The Institution of Engineers (India): Series D.
Crossref
Param Singh, Vinod Yadava & Audhesh Narayan. (2022) Performance Study of Ultrasonic-Assisted Micro-Electrical Discharge Machining of Inconel 718 Superalloy Using Rotary Tool Electrode. Journal of The Institution of Engineers (India): Series C 104:1, pages 149-162.
Crossref
Sahil Sharma, Umesh Kumar Vates & Amit Bansal. (2020) Optimization of machining characteristics for EDM of different nickel-based alloys by embodying of fuzzy, grey relational and Taguchi technique. World Journal of Engineering 18:1, pages 23-36.
Crossref
P. Manikandaprabu, Deepak Kumar Thakur, M. Sathish Kumar, M. Sivanesh Prabhu & A. Ramesh Kumar. (2021) Study and analysis of various inclination pathway electrode tool in electrical discharge drilling. Materials Today: Proceedings 43, pages 1215-1219.
Crossref
Vitor Baldin, Claudia Regina Bernardi Baldin, Alisson Rocha Machado & Fred Lacerda Amorim. (2020) Machining of Inconel 718 with a defined geometry tool or by electrical discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
M. S. Nagrale & S. A. Mastud. 2020. Trends in Manufacturing Processes. Trends in Manufacturing Processes 23 34 .
Yerui Feng, Yongfeng Guo, Zebin Ling & Xiaoyou Zhang. (2018) Micro-holes EDM of superalloy Inconel 718 based on a magnetic suspension spindle system. The International Journal of Advanced Manufacturing Technology 101:5-8, pages 2015-2026.
Crossref
Param Singh, Vinod Yadava & Audhesh Narayan. (2018) Machining Performance Characteristics of Inconel 718 Superalloy Due to Hole-Sinking Ultrasonic Assisted Micro-EDM. Journal of Advanced Manufacturing Systems 17:01, pages 89-105.
Crossref
Nan Xiang, Zhong-jin Wang, Jun Yi & Hui Song. (2016) Controlling of material flow in the quasi-bulk forming of thin-walled corrugated rings through optimization of contact pressure. The International Journal of Advanced Manufacturing Technology 91:5-8, pages 2077-2088.
Crossref
P. Kuppan, S. Narayanan, R. Oyyaravelu & A.S.S. Balan. (2017) Performance Evaluation of Electrode Materials in Electric Discharge Deep Hole Drilling of Inconel 718 Superalloy. Procedia Engineering 174, pages 53-59.
Crossref
A. Torres, C. J. Luis & I. Puertas. (2015) Analysis of the influence of EDM parameters on surface finish, material removal rate, and electrode wear of an INCONEL 600 alloy. The International Journal of Advanced Manufacturing Technology 80:1-4, pages 123-140.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.