Citations (38)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (9)
Parveen Kumar, Satish Kumar Sharma & Ratnesh Kumar Raj Singh. (2023) Recent trends and future outlooks in manufacturing methods and applications of FGM: a comprehensive review. Materials and Manufacturing Processes 38:9, pages 1033-1067.
Read now
Read now
Anshu Sahu, I. A. Palani & Vipul Singh. (2022) Parametric investigations on laser-induced forward transfer based micro-3D printing of NiTi alloy. Materials and Manufacturing Processes 37:11, pages 1310-1319.
Read now
Read now
Guo Dong Goh, Vishwesh Dikshit, Jia An & Wai Yee Yeong. (2022) Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic: an investigation of mode I interlaminar fracture toughness. Mechanics of Advanced Materials and Structures 29:10, pages 1418-1430.
Read now
Read now
Zhongliang Lu, Jiwei Cao, Zhaoqiang Song, Dichen Li & Bingheng Lu. (2019) Research progress of ceramic matrix composite parts based on additive manufacturing technology. Virtual and Physical Prototyping 14:4, pages 333-348.
Read now
Read now
Ramkumar Sathiyamurthy & Muthukannan Duraiselvam. (2019) Selective laser ablation of CFRP composite to enhance adhesion bonding. Materials and Manufacturing Processes 34:11, pages 1296-1305.
Read now
Read now
Shivdayal Rao, Abhijeet Sethi, Alok Kumar Das, Niladri Mandal, P. Kiran, Rizul Ghosh, A. R. Dixit & A. Mandal. (2017) Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Materials and Manufacturing Processes 32:14, pages 1612-1621.
Read now
Read now
Jian Liu, Hany Hassanin, Zhenyu Ni, Yi Yang, Gang Yang & Kyle Jiang. (2017) Production of high-precision micro metallic components by electroforming process. Materials and Manufacturing Processes 32:12, pages 1325-1330.
Read now
Read now
Zun-Qian Zhang, Yu-Zhu Zhang, Ai-Min Yang, Hong-Wei Xing, Tie-Lei Tian & Zhi-Hui Li. (2016) Preparation and Properties of Slag Wool Board using Modified Polyvinyl Alcohol as Binder. Materials and Manufacturing Processes 31:2, pages 168-172.
Read now
Read now
Shyh-Yuan Lee & Cho-Pei Jiang. (2015) Development of a Three-Dimensional Slurry Printing System Using Dynamic Mask Projection for Fabricating Zirconia Dental Implants. Materials and Manufacturing Processes 30:12, pages 1498-1504.
Read now
Read now
Articles from other publishers (29)
Lisa M. Rueschhoff, Luke A. Baldwin, James O. Hardin & Jonathan Kaufman. (2023) Future directions in ceramic additive manufacturing: Fiber reinforcements and artificial intelligence. Journal of the American Ceramic Society.
Crossref
Crossref
Vishal Darji, Shamsher Singh & Harlal Singh Mali. (2023) Mechanical characterization of additively manufactured polymer composites: A state‐of‐the‐art review and future scope. Polymer Composites 44:8, pages 4370-4419.
Crossref
Crossref
Jaroslav Majko, Milan Vaško, Marián Handrik & Milan Sága. (2023) Challenges in Tensile Testing of Thermoplastic Composites Reinforced with Chopped Carbon Fibre Produced by Fused Filament Fabrication Method. Manufacturing Technology 23:2, pages 216-224.
Crossref
Crossref
Abdel-Hamid I. Mourad, Abdulla Almomani, Irfan Ahmad Sheikh & Ammar H. Elsheikh. (2023) Failure analysis of gas and wind turbine blades: A review. Engineering Failure Analysis 146, pages 107107.
Crossref
Crossref
Xueli Zhou, Luquan Ren, Zhengyi Song, Guiwei Li, Jifeng Zhang, Bingqian Li, Qian Wu, Wangxuan Li, Lei Ren & Qingping Liu. (2023) Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications. Composites Part B: Engineering 254, pages 110585.
Crossref
Crossref
Jinxing Sun, Daorong Ye, Ji Zou, Xiaoteng Chen, Yue Wang, Jinsi Yuan, Haowen Liang, Hongqiao Qu, Jon Binner & Jiaming Bai. (2023) A review on additive manufacturing of ceramic matrix composites. Journal of Materials Science & Technology 138, pages 1-16.
Crossref
Crossref
Kamal Kumar Ojha, Srinath Chowdarpally & Vishal Francis. 2023. Recent Advancements in Mechanical Engineering. Recent Advancements in Mechanical Engineering
473
483
.
Jiaming Bai, Jinxing Sun & Jon Binner. 2023. Additive Manufacturing. Additive Manufacturing
245
331
.
Bisma Parveez, M. I. Kittur, Irfan Anjum Badruddin, Sarfaraz Kamangar, Mohamed Hussien & M. A. Umarfarooq. (2022) Scientific Advancements in Composite Materials for Aircraft Applications: A Review. Polymers 14:22, pages 5007.
Crossref
Crossref
Weizhe Tang, Tong Zhao, Rui Dou & Li Wang. (2022) Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration. Additive Manufacturing 59, pages 103168.
Crossref
Crossref
Siqi Wu, Lei Yang, Changshun Wang, Chunze Yan & Yusheng Shi. (2022) Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion. Additive Manufacturing 56, pages 102910.
Crossref
Crossref
Wenqing Wang, Lu Zhang, Xingjie Dong, Jianqin Wu, Qing Zhou, Suwen Li, Chujing Shen, Wei Liu, Gang Wang & Rujie He. (2022) Additive manufacturing of fiber reinforced ceramic matrix composites: Advances, challenges, and prospects. Ceramics International 48:14, pages 19542-19556.
Crossref
Crossref
Changshun Wang, Siqi Wu, Chunze Yan, Yusheng Shi, Guoping Wu & Xiao Han. (2022) Research and applications of additive manufacturing technology of SiC ceramics. Chinese Science Bulletin 67:11, pages 1137-1154.
Crossref
Crossref
Karthikeyan Ramachandran, Vignesh Boopalan, Joseph C. Bear & Ram Subramani. (2021) Multi-walled carbon nanotubes (MWCNTs)-reinforced ceramic nanocomposites for aerospace applications: a review. Journal of Materials Science 57:6, pages 3923-3953.
Crossref
Crossref
Salah Elsheikhi & Khaled Y. Benyounis. 2022. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Saja M. Nabat Al‐Ajrash, Charles Browning, Rose Eckerle & Li Cao. (2021) Innovative procedure for 3D printing of hybrid silicon carbide/carbon fiber nanocomposites. Nano Select 2:11, pages 2201-2208.
Crossref
Crossref
Son Thanh Nguyen, Ayahisa Okawa, Hirokazu Iwasawa, Tadachika Nakayama, Hideki Hashimoto, Tohru Sekino, Hisayuki Suematsu & Koichi Niihara. (2021) Titanium Nitride and Yttrium Titanate Nanocomposites, Endowed with Renewable Self‐Healing Ability. Advanced Materials Interfaces 8:22.
Crossref
Crossref
Vahid Monfared, Hamid Reza Bakhsheshi-Rad, Seeram Ramakrishna, Mahmood Razzaghi & Filippo Berto. (2021) A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites. Micromachines 12:6, pages 704.
Crossref
Crossref
Yang Zou, Chen-Hui Li, Yihao Tang, Liang Hu, Jiang-An Liu, Jia-Min Wu & Yu-Sheng Shi. (2020) Preform impregnation to optimize the properties and microstructure of RB-SiC prepared with laser sintering and reactive melt infiltration. Journal of the European Ceramic Society 40:15, pages 5186-5195.
Crossref
Crossref
Yang Zou, Chen-Hui Li, Liang Hu, Jiang-An Liu, Jia-Min Wu & Yu-Sheng Shi. (2020) Effects of short carbon fiber on the macro-properties, mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering. Ceramics International 46:8, pages 12102-12110.
Crossref
Crossref
Arfan Majeed, Altaf Ahmed, Jingxiang Lv, Tao Peng & Muhammad Muzamil. (2020) A state-of-the-art review on energy consumption and quality characteristics in metal additive manufacturing processes. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
Crossref
Vishwesh Dikshit, Guo Dong Goh, Arun Prasanth Nagalingam, Guo Liang Goh & Wai Yee Yeong. 2020. Fiber-Reinforced Nanocomposites: Fundamentals and Applications. Fiber-Reinforced Nanocomposites: Fundamentals and Applications
371
394
.
Divya Zindani & Kaushik Kumar. (2019) An insight into additive manufacturing of fiber reinforced polymer composite. International Journal of Lightweight Materials and Manufacture 2:4, pages 267-278.
Crossref
Crossref
Dipen Rajak, Durgesh Pagar, Pradeep Menezes & Emanoil Linul. (2019) Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers 11:10, pages 1667.
Crossref
Crossref
Hua Fu, Wei Zhu, Zhongfeng Xu, Peng Chen, Chunze Yan, Kun Zhou & Yusheng Shi. (2019) Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering. Journal of Alloys and Compounds 792, pages 1045-1053.
Crossref
Crossref
Guo Dong Goh, Yee Ling Yap, Shweta Agarwala & Wai Yee Yeong. (2018) Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Advanced Materials Technologies 4:1.
Crossref
Crossref
Wei Zhu, Hua Fu, Zhongfeng Xu, Rongzhen Liu, Ping Jiang, Xinyu Shao, Yusheng Shi & Chunze Yan. (2018) Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology. Journal of the European Ceramic Society 38:14, pages 4604-4613.
Crossref
Crossref
Smita Rani Panda, Purna Chandra Mishra & Manoj Ukamanal. (2018) Effects of modified waste fly ash reinforcement on mechanical behavior of novel ALFA composite. Materials Today: Proceedings 5:11, pages 24827-24835.
Crossref
Crossref
Smita Rani Panda, Mani Bhusan Rajguru Mohapatro & Purna Chandra Mishra. (2018) Investigation on frictional and machining characteristics of novel ALFA composite reinforced with treated waste fly ash. Materials Today: Proceedings 5:9, pages 19728-19737.
Crossref
Crossref