Citations (196)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (34)
Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Read now
Avadhoot Rajurkar & Satish Chinchanikar. (2023) Investigations on homothetic and hybrid micro-textured tools during turning Inconel-718. Materials and Manufacturing Processes 0:0, pages 1-17.
Read now
Read now
Yun Huang, Gang Liu, Guijian Xiao & Jiayu Xu. (2023) Abrasive belt grinding force and its influence on surface integrity. Materials and Manufacturing Processes 38:7, pages 888-897.
Read now
Read now
Amit S. Patil, V. K. Sunnapwar, K. S. Bhole, M. P. Ray & Y. S. More. (2023) Effective cooling methods for Ti6Al4V CNC milling: a review. Advances in Materials and Processing Technologies 9:2, pages 457-506.
Read now
Read now
Piyush Pant & Pushpendra S. Bharti. (2023) Experimental Investigation on Micro-Electrical Discharge Machining process for heat treated Nickel-based Nimonic 80A. Materials and Manufacturing Processes 38:1, pages 1-12.
Read now
Read now
Allan George, Basil Kuriachen, P.B. Dhanish & Jose Mathew. (2022) Experimental investigations into the influence of AlSi-10Mg soft tool coating on the machinability of Ti6Al4V. Materials and Manufacturing Processes 37:12, pages 1422-1432.
Read now
Read now
Mehdi Gerami, Masoud Farahnakian & Sadegh Elhami Joosheghan. (2022) Effect of grooving textured tool on the titanium chip morphology. Materials and Manufacturing Processes 37:9, pages 1013-1021.
Read now
Read now
R. Anburaj & M. Pradeep Kumar. (2021) Influences of cryogenic CO2 and LN2 on surface integrity of inconel 625 during face milling. Materials and Manufacturing Processes 36:16, pages 1829-1839.
Read now
Read now
Cleverson Pinheiro, Marcel Yuzo Kondo, Simone Simões Amaral, Emanuele Schneider Callisaya, José Vitor Candido De Souza, Manoel Cléber De Sampaio Alves & Marcos Valério Ribeiro. (2021) Effect of machining parameters on turning process of Inconel 718. Materials and Manufacturing Processes 36:12, pages 1421-1437.
Read now
Read now
R. Anburaj & M. Pradeep Kumar. (2021) Experimental studies on cryogenic CO2 face milling of Inconel 625 superalloy. Materials and Manufacturing Processes 36:7, pages 814-826.
Read now
Read now
S. Selvakumar, V. S. Sreebalaji & K Ravikumar. (2021) Machinability Analysis and Optimization in Micro turning on tool wear for Titanium Alloy. Materials and Manufacturing Processes 36:7, pages 792-802.
Read now
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Read now
Jiju V. Elias, Prasanna Venkatesh N.Deepak Lawrence K.Jose Mathew. (2021) Tool texturing for micro-turning applications – an approach using mechanical micro indentation. Materials and Manufacturing Processes 36:1, pages 84-93.
Read now
Read now
K. Hariharan, C. Chandrasekhara Sastry, M. Padmanaban & M. Gideon Ganesh. (2020) Experimental investigation of bioceramic (Hydroxyapatite and Yttrium stabilized zirconia) composite on Ti6Al7Nb alloy for medical implants. Materials and Manufacturing Processes 35:5, pages 521-530.
Read now
Read now
Abhineet Saini, B.S. Pabla & S.S. Dhami. (2020) Improvement in performance of cryogenically treated tungsten carbide tools in face milling of Ti-6Al-4V alloy. Materials and Manufacturing Processes 35:5, pages 598-607.
Read now
Read now
Weiwei Ming, Jiaqiang Dang, Qinglong An & Ming Chen. (2020) Chip formation and hole quality in dry drilling additive manufactured Ti6Al4V. Materials and Manufacturing Processes 35:1, pages 43-51.
Read now
Read now
Hao Yan, Kamran Paynabar & Massimo Pacella. (2019) Structured Point Cloud Data Analysis Via Regularized Tensor Regression for Process Modeling and Optimization. Technometrics 61:3, pages 385-395.
Read now
Read now
J. Y. Yi, K. H. Chen, Y. C. Xu & C. J. Zhu. (2019) Performance of AlTiBN and AlTiTaN coatings during milling of titanium. Surface Engineering 35:6, pages 501-506.
Read now
Read now
Jiaqiang Dang, Gongyu Liu, Yaofeng Chen, Qinglong An, Weiwei Ming & Ming Chen. (2019) Experimental investigation on machinability of DMLS Ti6Al4V under dry drilling process. Materials and Manufacturing Processes 34:7, pages 749-758.
Read now
Read now
Vishwanath Chavan, Shirish Kadam & Mudigonda Sadaiah. (2019) Performance of alumina-based ceramic inserts in high-speed machining of nimonic 80A. Materials and Manufacturing Processes 34:1, pages 8-17.
Read now
Read now
A. Palanisamy, T. Selvaraj & S. Sivasankaran. (2018) Heat treatment effect on CNC turning of Incoloy 800H superalloy. Materials and Manufacturing Processes 33:14, pages 1594-1601.
Read now
Read now
K. M. Kumar, P. Hariharan & B. Ramesh. (2018) Study on the influential process parameters in machining the austempered ductile iron. Materials and Manufacturing Processes 33:4, pages 414-421.
Read now
Read now
Mehrshad Mehrpouya, Abed Moheb Shahedin, Sarmad Daood Salman Dawood & Ahmad Kamal Ariffin. (2017) An investigation on the optimum machinability of NiTi based shape memory alloy. Materials and Manufacturing Processes 32:13, pages 1497-1504.
Read now
Read now
A. Suárez, L. N. López de Lacalle, R. Polvorosa, F. Veiga & A. Wretland. (2017) Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718. Materials and Manufacturing Processes 32:6, pages 678-686.
Read now
Read now
R. Ravi Raja Malar Vannan, T. V. Moorthy, P. Hariharan & P. Prabhu. (2017) Effect of physical vapor deposited bilayer (AlCrN + TiAlN) coating on high-speed steel single point cutting tool. Materials and Manufacturing Processes 32:4, pages 373-376.
Read now
Read now
Vijay Venkatesh, Niharika Swain, G. Srinivas, Praveen Kumar & Harish C. Barshilia. (2017) Review on the machining characteristics and research prospects of conventional microscale machining operations. Materials and Manufacturing Processes 32:3, pages 235-262.
Read now
Read now
Munish Kumar Gupta, P. K. Sood & Vishal S. Sharma. (2016) Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment. Materials and Manufacturing Processes 31:13, pages 1671-1682.
Read now
Read now
D. Palanisamy & P. Senthil. (2016) Machinability Study of Laser Surface Treated 15-5 PH Stainless Steel. Materials and Manufacturing Processes 31:13, pages 1755-1762.
Read now
Read now
Muath Al-Falahi, B. T. Baharudin, Tang Sai Hong & Khamirul Amin Matori. (2016) Surface Defects in Groove Milling of Hastelloy-C276 Under Fluid Coolant. Materials and Manufacturing Processes 31:13, pages 1724-1732.
Read now
Read now
Chetan, S. Ghosh & P. V. Rao. (2016) Environment Friendly Machining of Ni–Cr–Co Based Super Alloy using Different Sustainable Techniques. Materials and Manufacturing Processes 31:7, pages 852-859.
Read now
Read now
Hongmei Li, Ting Lei, Jincheng Zhao, Qinliang Shang & Zhou Lin. (2016) Production of Ti–13Nb–13Zr Alloy by Powder Metallurgy (P/M) via Sintering Hydrides. Materials and Manufacturing Processes 31:6, pages 719-724.
Read now
Read now
Guangming Zheng, Jun Zhao, Xiang Cheng, Rufeng Xu & Guoyong Zhao. (2016) Experimental Investigation on Sialon Ceramic Inserts for Ultra-high-speed Milling of Inconel 718. Materials and Manufacturing Processes 31:5, pages 633-640.
Read now
Read now
B. Kuriachen & J. Mathew. (2016) Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V. Materials and Manufacturing Processes 31:4, pages 439-446.
Read now
Read now
Hongbing Wu & Lei Guo. (2014) Machinability of Titanium Alloy TC21 Under Orthogonal Turning Process. Materials and Manufacturing Processes 29:11-12, pages 1441-1445.
Read now
Read now
Articles from other publishers (162)
T.L. Dora, Sandeep Kumar Singh, Radha Raman Mishra, Raj Das, Juhi Gupta & Akarsh Verma. (2024) Unravelling the atomistic-scale insights into tensile response of equiatomic cupronickel alloy with pre-existing faceted grain boundary interface. Results in Surfaces and Interfaces 14, pages 100172.
Crossref
Crossref
Emanuele Schneider Callisaya, Manoel Cléber de Sampaio Alves, Marcel Yuzo Kondo, Marcos Valério Ribeiro, Michelle Leali Costa, Martin Ferreira Fernandes & Edson Cocchieri Botelho. (2023) Analysis of power consumption during the machining of epoxy based CFRP. Materials Today Communications 37, pages 106993.
Crossref
Crossref
Daniel Martínez Krahmer, Vitaliy Martynenko, Alberto Pereyra Osenda & Antonio J. Sánchez Egea. (2023) Correlating dry wear turning and pin-on-disc tests: a cost-effective approach to machinability evaluation for low carbon steel grades. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:12.
Crossref
Crossref
Syed Sohail Akhtar, Rashid Ali Laghari, Amer D. Alotaibi, Abba A. Abubakar, Samir Mekid & Khaled S. Al-Athel. (2023) A critical review on functionally graded ceramic materials for cutting tools: Current trends and future prospects. REVIEWS ON ADVANCED MATERIALS SCIENCE 62:1.
Crossref
Crossref
Jiu Yin, Genyu Chen, Zhiliang Huang, Chang Chen, Xuni Yin, Qi Zeng & Jiayan Liu. (2023) Fabrication of PCD face grinding wheel with positive rake angle by femtosecond laser and its performance evaluation in cemented carbide grinding. Diamond and Related Materials 139, pages 110418.
Crossref
Crossref
Abdelkrem Eltaggaz, Shafahat Ali, Kashish Badwal & Ibrahim Deiab. (2023) Influence of nanoparticle concentration in nanofluid MQL on cutting forces, tool wear, chip morphology when milling of Inconel 718. The International Journal of Advanced Manufacturing Technology 129:3-4, pages 1787-1800.
Crossref
Crossref
Pengwen Wang, Aqib Mashood Khan, Mohammed Alkahtani, Fahad Alasim, Muhammad Jamil & Ghulam Hussain. (2023) Introducing new green machining technology to enhance process performance and reduce environmental pollution in the metal processing industry. Environmental Science and Pollution Research 30:51, pages 111552-111569.
Crossref
Crossref
Asif Iqbal, Jannis Saelzer, Muhammad S. Abu Bakar, Dirk Biermann, Aqib Mashood Khan, Martin Sicking & Malik M. Nauman. (2023) Side-milling of Incoloy 825 under pulsed and continuous modes of cryogenic cooling. Journal of Manufacturing Processes 104, pages 246-256.
Crossref
Crossref
T. L. Dora, Sandeep Kumar Singh, Radha Raman Mishra & Akarsh Verma. (2023) Role of Crystal Orientation, Temperature, and Strain Rate on the Mechanical Characterization of Nickel: An Atomistic-scale investigation. Journal of Micromanufacturing.
Crossref
Crossref
Aswani Kumar Singh & Varun Sharma. (2023) Sustainable grinding approach to analyze surface integrity of nickel-based superalloy using atomized green cutting fluid. Journal of Manufacturing Processes 102, pages 1023-1042.
Crossref
Crossref
Tarcisio K. Filho, Qianxi He, Jose M. Paiva & Stephen C. Veldhuis. (2023) An analysis of different cutting strategies to improve tool life when machining Ti-5Al-5V-5Mo-3Cr alloy. Journal of Manufacturing Processes 102, pages 50-66.
Crossref
Crossref
Xiaoming Yin, Shenliang Yang, Xun Li & Deyuan Zhang. (2023) Research on surface integrity of Inconel 718 with various ultrasonic ball-end milling times. The International Journal of Advanced Manufacturing Technology 128:5-6, pages 2187-2197.
Crossref
Crossref
Ragavanantham Shanmugam, Satish Shenoy Baloor, Ugur Koklu, Ashwin Polishetty & Gururaj Bolar. (2023) Machining Temperature, Surface Integrity and Burr Size Investigation during Coolant-Free Hole Milling in Ti6Al4V Titanium Alloy. Lubricants 11:8, pages 349.
Crossref
Crossref
Hiru P Hirudayanathan, Sujan Debnath, Mahmood Anwar, Mahzan B Johar, Naveen K Elumalai & U Mohammed Iqbal. (2023) A review on influence of nanoparticle parameters on viscosity of nanofluids and machining performance in minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
Xiaolin Shi, Lin Niu, Guolin Yang, Hongchao Wang & Zhuji Jin. (2023) Surface modification of nickel-based superalloy by electrochemical selective dissolution. Journal of Alloys and Compounds 947, pages 169628.
Crossref
Crossref
Jindrich Sykora, Michael Sedlmajer, Tim Schubert, Markus Merkel, Lubos Kroft, Ludmila Kucerova & Jan Rehor. (2023) Additive Manufacturing of WC-Co Specimens with Internal Channels. Materials 16:11, pages 3907.
Crossref
Crossref
L.J. Ma, H. Yu, X.H. Mao, C.R. Li, C.Y. Feng & F.N. Li. (2023) Influence of Cutting Tool and Drilling Process on the Machinability of Inconel 718. Manufacturing Technology 23:2, pages 204-215.
Crossref
Crossref
Xiaohui Jiang, Yuxi Wei, Jinhua Zhou, Ke Zhan, Zishan Ding & Steven Y. Liang. (2023) Residual stress generation and evaluation in milling: a review. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Jing Zhang, Feng Sun, Weiru Zhang & Changxi Jiang. (2022)
Cost‐effective fabrication of α‐SiAlON ceramics with CeO
2
addition for cutting tool applications
. International Journal of Applied Ceramic Technology 20:2, pages 1215-1224.
Crossref
Crossref
Chang-Yong Yang, Zhi Wang, Hao Su, Yu-Can Fu, Nian-Hui Zhang & Wen-Feng Ding. (2022) Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy. Advances in Manufacturing 11:1, pages 130-142.
Crossref
Crossref
Vijaya Raja Ragavan G, Poovazhagan Lakshmanan & Mariyappan Mahalingam. (2022)
Examining the surface roughness and kerf quality of micro-slots cut on the surfaces of Ti-B
4
C nanocomposites by WEDM: a desirability approach
. Materials Research Express 9:12, pages 125009.
Crossref
Crossref
Sanjay Chintakindi, Ali Alsamhan, Mustufa Haider Abidi & Maduri Praveen Kumar. (2022) Annealing of Monel 400 Alloy Using Principal Component Analysis, Hyper-parameter Optimization, Machine Learning Techniques, and Multi-objective Particle Swarm Optimization. International Journal of Computational Intelligence Systems 15:1.
Crossref
Crossref
R. Mohan, Shardul Shrikhande, Vedant Joshi & R. Harish. (2022) Numerical Investigation on Thermal Performance of Duplex Nanocoolant Jets in Drilling of Ti-6Al-4V Alloy. Applied Sciences 12:22, pages 11715.
Crossref
Crossref
Akash Gautam, Chetan, Gaurav Bartarya & Pranesh Dutta. (2022) Environment-friendly machining of aerospace-grade Ti alloy using SiAlON ceramic and AlTiN coated carbide inserts under sustainable biodegradable mist condition. CIRP Journal of Manufacturing Science and Technology 39, pages 185-198.
Crossref
Crossref
Carlos Vinicius Lemes, Anselmo Eduardo Diniz & Victor Rossi Saciotto. (2022) Comparing the performance of several tool coatings in turning of commercially pure titanium grade 4. The International Journal of Advanced Manufacturing Technology 123:5-6, pages 1733-1743.
Crossref
Crossref
Nan Dong, Peng Wei, Peng Yao, Shuzhen Ma & Jianhua Li. (2022) Effect of Cutting Parameters on Nano-Cutting of Single Crystal γ-TiAl Alloy with Water Medium via Atomistic Simulation. Metals 12:11, pages 1861.
Crossref
Crossref
Ye Yang, Hao Luan, Songshan Guo, Fengbin Liu, Yuanjing Dai, Chenhui Zhang, Duzhou Zhang & Gang Zhou. (2022) Tribological Behaviors of Inconel 718–Tungsten Carbide Friction Pair with Sulfur Additive Lubrication. Metals 12:11, pages 1841.
Crossref
Crossref
Shengsheng Zhang, Guoyu Hu, Jianping Zhou, Lizhong Wang, Yan Xu, Xiangyu Dai, Jiahao Wang & Xinyang Ma. (2022) Research on short electric arc–electrochemical combined machining performance of Ti–6Al–4V alloys using different electrode materials. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:10.
Crossref
Crossref
Amit S. Patil, V. K. Sunnapwar, Kiran S. Bhole, Ankit D. Oza, S. M. Shinde & R. Ramesh. (2022) Effective machining parameter selection through fuzzy AHP-TOPSIS for 3D finish milling of Ti6Al4V. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Nur Syahilia Syahira Safie, Muhamad Nasir Murad, Tan Chye Lih, Azwan Iskandar Azmi, Wan Azmi Wan Hamzah & Mohd Danish. (2022) Roles of Eco-Friendly Non-Edible Vegetable Oils in Drilling Inconel 718 through Minimum Quantity Lubrication. Lubricants 10:9, pages 211.
Crossref
Crossref
Ramandeep Singh & Varun Sharma. (2022) Machining induced surface integrity behavior of nickel-based superalloy: Effect of lubricating environments. Journal of Materials Processing Technology 307, pages 117701.
Crossref
Crossref
Rawaid Ali, Peng Song, Muhammad Khan, Taihong Huang, Shabir Ali, Syed Hatim Sha, Jiansheng Lu, Zain Ul Wahab & Seemab Pervaiz. (2022) The effect of pre-oxidation on the hot corrosion behavior of CoNiCrAlHf alloy in Na2SO4 environment at elevated temperature. Applied Physics A 128:9.
Crossref
Crossref
Moran Xu, Changping Li, Rendi Kurniawan, Chen Jielin, Ye In Kwak, Saood Ali, Min Ki Choo & Tae Jo Ko. (2022) Ultrasonic and electrical discharge–assisted milling of the Ti-6Al-4 V alloy. The International Journal of Advanced Manufacturing Technology 122:3-4, pages 1897-1917.
Crossref
Crossref
Farrukh Hafeez, Deviprakash Jyothi Devan, Jamal Sheikh-Ahmad & Fahad Almaskari. (2022) Wear mechanism and quantification of polycrystalline diamond milling cutter in high speed trimming of carbon fiber reinforced epoxy. International Journal of Refractory Metals and Hard Materials 106, pages 105863.
Crossref
Crossref
Junhui Ma, Olufisayo A. Gali & Reza A. Riahi. (2022)
An investigation into the tribological behaviour of cutting fluid additives on
Ti‐6Al‐4V
alloy
. Lubrication Science 34:5, pages 331-346.
Crossref
Crossref
Seong Je Park, Jun Hak Lee, Jeongho Yang, Woongbeom Heogh, Dongseok Kang, Si Mo Yeon, Sang Hoon Kim, Sukjoon Hong, Yong Son & Jiyong Park. (2022) Lightweight injection mold using additively manufactured Ti-6Al-4V lattice structures. Journal of Manufacturing Processes 79, pages 759-766.
Crossref
Crossref
Sarthak Prasad Sahoo & Saurav Datta. (2022) Comparative experimental study on application feasibiility of MTCVD TiCN-Al2O3-TiOCN multi-layer coated carbide and PVD TiN single layer coated composite ceramic inserts during dry machining of Ti-6Al-4V. Sādhanā 47:2.
Crossref
Crossref
Fuzhou Guo, Zengbin Yin, Dongbo Hong, Kejuan Yu & Juntang Yuan. (2022) Cutting performance of a new spark plasma sintered SiAlON ceramic tool for high-speed milling of Inconel 718. The International Journal of Advanced Manufacturing Technology 119:11-12, pages 7327-7338.
Crossref
Crossref
Qiao Wang, Zhaofeng Wang, Jiwei Yue, Fenghua An, Jiaxin Dong & Wei Ke. (2022) Temperature of the Core Tube Wall during Coring in Coal Seam: Experiment and Modeling. ACS Omega 7:9, pages 7901-7911.
Crossref
Crossref
J. Ma, J. Mohammadi, O. A. Gali & A. R. Riahi. (2021) The Influence of Polymeric Ester-Type Additives on the Performance of Metal Cutting Fluids for Machining of Titanium Alloy. Journal of Materials Engineering and Performance 31:3, pages 2057-2073.
Crossref
Crossref
Zhan Gao, Qiguo Hu & Xiangyang Xu. (2021) Condition monitoring and life prediction of the turning tool based on extreme learning machine and transfer learning. Neural Computing and Applications 34:5, pages 3399-3410.
Crossref
Crossref
Rufeng Zhang, Anhai Li & Xuhao Song. (2022) Surface quality adjustment and controlling mechanism of machined surface layer in two-step milling of titanium alloy. The International Journal of Advanced Manufacturing Technology 119:3-4, pages 2691-2707.
Crossref
Crossref
Mohammadreza Fazlali, Mauricio Ponga & Xiaoliang Jin. (2022) Analytical Modeling of Shear Localization in Orthogonal Cutting Processes. Journal of Manufacturing Science and Engineering 144:2.
Crossref
Crossref
Ameer Mohamed Akeel, Ramanuj Kumar, P. Chandrasekhar, Amlana Panda & Ashok Kumar Sahoo. (2022) Hard to cut metal alloys machining: Aspects of cooling strategies, cutting tools and simulations. Materials Today: Proceedings 62, pages 3208-3212.
Crossref
Crossref
J.T. Winowlin Jappes, A. Ajithram, M. Adamkhan & D. Reena. (2022) Welding on Ni based super alloys – A review. Materials Today: Proceedings 60, pages 1656-1659.
Crossref
Crossref
Hewu Sun, Bin Zou & Wei Chen. (2021) Cutting performance of silicon-based ceramic end milling tools in high-efficiency machining of GH4099 under dry condition. The International Journal of Advanced Manufacturing Technology 118:5-6, pages 1719-1732.
Crossref
Crossref
Md Ehsan Asgar & Ajay Kumar Singh Singholi. (2021) Analysis of control factors and surface integrity during wire-EDM of Inconel 718 alloy using T-GRA approach. EMITTER International Journal of Engineering Technology 9:2, pages 294-312.
Crossref
Crossref
Uma Maheshwera Reddy Paturi, Vidhya Darshini B.N.S. Reddy. (2021) Progress of machinability on the machining of Inconel 718: A comprehensive review on the perception of cleaner machining. Cleaner Engineering and Technology 5, pages 100323.
Crossref
Crossref
Sarthak Prasad Sahoo & Saurav Datta. (2021) Experimental studies on dry machining behavior of Ti-6Al-4V using carbide, cermet, and SiAlON tools. Sādhanā 46:4.
Crossref
Crossref
Sarthak Prasad Sahoo, Saurav Datta, Tarapada Roy & Suman Ghosh. (2021) Machining performance of Ti6Al4V under dry environment, pressurized air supply and water-MQL: analysis of machining-induced vibration signals and captured thermographs. Sādhanā 46:4.
Crossref
Crossref
P. Fernández-Lucio, I. Villarón-Osorno, O. Pereira Neto, E. Ukar, L.N. López de Lacalle & A. Gil del Val. (2021) Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V. Journal of Materials Research and Technology 15, pages 177-188.
Crossref
Crossref
Jeong-Han Lee, Sung-Kil Hong & Hyun-Kuk Park. (2021) Effects of deep cryogenic treatment for tungsten carbide‑iron cemented carbide. International Journal of Refractory Metals and Hard Materials 100, pages 105649.
Crossref
Crossref
Kuan Zhao, Shuai Wang, He Xue & Zheng Wang. (2021) Effect of Material Heterogeneity on Environmentally Assisted Cracking Growth Rate of Alloy 600 for Safe-End Welded Joints. Materials 14:20, pages 6186.
Crossref
Crossref
Nimel Sworna Ross, Mozammel Mia, Saqib Anwar, Manimaran G, Mustafa Saleh & Shafiq Ahmad. (2021) A hybrid approach of cooling lubrication for sustainable and optimized machining of Ni-based industrial alloy. Journal of Cleaner Production 321, pages 128987.
Crossref
Crossref
Anton Seleznev, Nestor Washington Solis Pinargote & Anton Smirnov. (2021) Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 11:9, pages 1385.
Crossref
Crossref
Ramanuj Kumar, Anish Pandey, Amlana Panda & Ashok Kumar Sahoo. (2021) Analysis of Wiper Tool Failure and Surface Roughness in Turning of Bio-compatible Ti-6Al-4V ELI Alloy. Journal of Failure Analysis and Prevention 21:4, pages 1403-1422.
Crossref
Crossref
Zhen Peng, Wan-Li Song, Cui-Li Ye, Pei Shi & Seung-Bok Choi. (2020) Model establishment of surface roughness and experimental investigation on magnetorheological finishing for polishing the internal surface of titanium alloy tubes. Journal of Intelligent Material Systems and Structures 32:12, pages 1278-1289.
Crossref
Crossref
D. Cavaleiro, D. Figueiredo, C.W. Moura, A. Cavaleiro, S. Carvalho & F. Fernandes. (2021) Machining performance of TiSiN(Ag) coated tools during dry turning of TiAl6V4 aerospace alloy. Ceramics International 47:8, pages 11799-11806.
Crossref
Crossref
Hongmei Li, Zhisheng Nong, Qian Xu, Qiushi Song, Ying Chen, Tiannan Man & Chenguang Hao. (2021)
In-situ Electrochemical Synthesis of Core-shell Structural NbC@Nb
5
Si
3
/Nb Composites in Molten Salt
. IOP Conference Series: Earth and Environmental Science 714:3, pages 032008.
Crossref
Crossref
Mahros Darsin, Rika Dwi Hidayatul Qoryah, Robertus Sidartawan, Allen Luviandy, Aris Zainul Muttaqin & Dwi Djumhariyanto. (2021) Performance of TiAlN PVD coated carbide tool in machining AISI 4340 with Minimum Quantity Lubrication (MQL) condition. IOP Conference Series: Materials Science and Engineering 1034:1, pages 012099.
Crossref
Crossref
M Bhuvanesh Kumar & P Sathiya. (2021) Methods and materials for additive manufacturing: A critical review on advancements and challenges. Thin-Walled Structures 159, pages 107228.
Crossref
Crossref
Peng Ruitao, Zhao Linfeng, Tong Jiawei, Fu Xiuli & Chen Meiliang. (2021) Application of pre-stressed cutting to aviation alloy: The effect on residual stress and surface roughness. Journal of Manufacturing Processes 62, pages 501-512.
Crossref
Crossref
Omid Kalantari, Farshid Jafarian & Mohammad Meghdad Fallah. (2021) Comparative investigation of surface integrity in laser assisted and conventional machining of Ti-6Al-4 V alloy. Journal of Manufacturing Processes 62, pages 90-98.
Crossref
Crossref
Yishang Li, Bin Zou, Zhenyu Shi, Chuanzhen Huang, Lei Li, Hanlian Liu, Hongtao Zhu, Peng Yao & Jikai Liu. (2021) Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nickel-based superalloy. Ceramics International 47:4, pages 5690-5698.
Crossref
Crossref
Vinay Varghese & Soham Mujumdar. (2021) Micromilling-induced Surface Integrity of Porous Additive Manufactured Ti6Al4V Alloy. Procedia Manufacturing 53, pages 387-394.
Crossref
Crossref
Suresh L. Chittewar & Nilesh G. Patil. (2021) Surface integrity of conventional and additively manufactured nickel superalloys: A review. Materials Today: Proceedings 44, pages 701-708.
Crossref
Crossref
Tiago B. Oschelski, Wilson T. Urasato, Heraldo J. Amorim & André J. Souza. (2021) Effect of cutting conditions on surface roughness in finish turning Hastelloy® X superalloy. Materials Today: Proceedings 44, pages 532-537.
Crossref
Crossref
Junhui Ma, Javad Mohammadi, Yan Zhou, Jeff Larsh, Kris Januszkiewicz, Robert Evans, Yixing Zhao, Olufisayo A. Gali & Reza A. Riahi. (2020) An investigation into cutting fluid additives performance during machining processing of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology 112:3-4, pages 977-987.
Crossref
Crossref
Nurul Zahirah Mohd Noor, Zainal Abidin Zailani, Roshaliza Hamidon & Norshah Afizi Shuaib. 2021. Intelligent Manufacturing and Mechatronics. Intelligent Manufacturing and Mechatronics
425
440
.
Rosmahidayu Rosnan, Azwan Iskandar Azmi, Muhammad Nasir Murad & Mohamed Ashraf Mahboob Ali. 2021. Intelligent Manufacturing and Mechatronics. Intelligent Manufacturing and Mechatronics
299
308
.
J. S. Kwame, E. Yakushina & P. Blackwell. 2021. Forming the Future. Forming the Future
2695
2704
.
M. Adam Khan & Kapil Gupta. 2021. Intelligent Manufacturing. Intelligent Manufacturing
37
56
.
J. S. Kwame, E. Yakushina & P. Blackwell. (2020) Impact of machining-induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences 2:12.
Crossref
Crossref
Jan Valíček, Marta Harničárová, Jan Řehoř, Milena Kušnerová, Ludmila Kučerová, Miroslav Gombár, Jaroslava Fulemová, Jan Filipenský & Jan Hnátík. (2020) Thermodynamics and Mechanics of Thermal Spraying of Steel EN 10060 Substrate with NiCrBSi Alloy after Milling. Materials 13:23, pages 5344.
Crossref
Crossref
K. Nimel Sworna Ross & G. Manimaran. (2020) Machining Investigation of Nimonic-80A Superalloy Under Cryogenic CO2 as Coolant Using PVD-TiAlN/TiN Coated Tool at 45° Nozzle Angle. Arabian Journal for Science and Engineering 45:11, pages 9267-9281.
Crossref
Crossref
D. Cavaleiro, D. Veeregowda, A. Cavaleiro, S. Carvalho & F. Fernandes. (2020) High temperature tribological behaviour of TiSiN(Ag) films deposited by HiPIMS in DOMS mode. Surface and Coatings Technology 399, pages 126176.
Crossref
Crossref
Vinothkumar Sivalingam, Zhuoliang Zan, Jie Sun, Baskaran Selvam, Munish Kumar Gupta, Muhammad Jamil & Mozammel Mia. (2020) Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants. Tribology International 148, pages 106235.
Crossref
Crossref
Mustafa Günay, Mehmet Erdi Korkmaz & Nafiz Yaşar. (2020) Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments. Journal of Manufacturing Processes 56, pages 678-687.
Crossref
Crossref
Mingming Lu, Bin Chen, Jieqiong Lin, Dongpo Zhao, Jiakang Zhou, Allen Yi & Zhimin Zhu. (2020) Friction modeling of tool-chip interface based on shear-slip theory for vibration assisted swing cutting. Journal of Manufacturing Processes 55, pages 240-248.
Crossref
Crossref
Rika Dwi Hidayatul Qoryah, Agil Widhy Azizi & Mahros Darsin. (2020) A Study of Chip Formation on Turning with Minimum Quantity Lubrication Method (MQL). EMITTER International Journal of Engineering Technology 8:1, pages 256-269.
Crossref
Crossref
Mehmet Erdi Korkmaz, Nafiz Yaşar & Mustafa Günay. (2020) Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy. Engineering Science and Technology, an International Journal 23:3, pages 664-673.
Crossref
Crossref
Erliang Liu, Wenzhao An, Zhichao Xu & Huiping Zhang. (2020) Experimental study of cutting-parameter and tool life reliability optimization in inconel 625 machining based on wear map approach. Journal of Manufacturing Processes 53, pages 34-42.
Crossref
Crossref
Wanli Song, Zhen Peng, Peifan Li, Pei Shi & Seung-Bok Choi. (2020) Annular Surface Micromachining of Titanium Tubes Using a Magnetorheological Polishing Technique. Micromachines 11:3, pages 314.
Crossref
Crossref
S. Rajamanickam, J. Prasanna & C. Chandrasekhara Sastry. (2020) Analysis of high aspect ratio small holes in rapid electrical discharge machining of superalloys using Taguchi and TOPSIS. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:2.
Crossref
Crossref
De Liu, Yaoyao Shi, Xiaojun Lin, Chao Xian & Zhiyang Gu. (2020) Polishing surface integrity of TC17 aeroengine blades. Journal of Mechanical Science and Technology 34:2, pages 689-699.
Crossref
Crossref
Vitor F. C. Sousa & Francisco J. G. Silva. (2020) Recent Advances in Turning Processes Using Coated Tools—A Comprehensive Review. Metals 10:2, pages 170.
Crossref
Crossref
Sunil Kumar, Ravindra Nath Yadav & R Kumar. (2020) Modeling and optimization of duplex turning parameters for Ni-718 using response surface modeling. Materials Research Express 6:12, pages 1265e7.
Crossref
Crossref
C Emmy Prema, S Suresh, G Ramanan & M Sivaraj. (2020)
Characterization, corrosion and failure strength analysis of Al7075 influenced with B
4
C and Nano-Al
2
O
3
composite using online acoustic emission
. Materials Research Express 7:1, pages 016524.
Crossref
Crossref
M Adam Khan & Kapil Gupta. (2020) A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools. Materials Research Express 7:1, pages 016537.
Crossref
Crossref
S. Sravan Sashank, S. Rajakumar, R. Karthikeyan & D. S. Nagaraju. (2020) Weldability, Mechanical Properties and Microstructure of Nickel Based Super Alloys: a review. E3S Web of Conferences 184, pages 01040.
Crossref
Crossref
Francesco Careri, Stano Imbrogno, Moataz M. Attallah, Khamis Essa & Domenico Umbrello. (2020) Finite Element Modeling of Machining Nickel Superalloy Produced By Direct Energy Deposition Process. Procedia Manufacturing 47, pages 525-529.
Crossref
Crossref
Jadam Thrinadh, Ansumita Mohapatra, Saurav Datta & Manoj Masanta. (2020) Machining behavior of Inconel 718 superalloy: Effects of cutting speed and depth of cut. Materials Today: Proceedings 26, pages 200-208.
Crossref
Crossref
Piyush Pant & Pushpendra S. Bharti. (2020) Electrical Discharge Machining (EDM) of nickel-based nimonic alloys: A review. Materials Today: Proceedings 25, pages 765-772.
Crossref
Crossref
Amlana Panda, Ashok Kumar Sahoo, Ramanuj Kumar & Rabin Kumar Das. (2020) A review on machinability aspects for AISI 52100 bearing steel. Materials Today: Proceedings 23, pages 617-621.
Crossref
Crossref
Dileep Kumar Ganji & G. Rajyalakshmi. 2020. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering
537
555
.
Jiyong Yi, Kanghua Chen & Yinchao Xu. (2019) Microstructure, Properties, and Titanium Cutting Performance of AlTiN–Cu and AlTiN–Ni Coatings. Coatings 9:12, pages 818.
Crossref
Crossref
Venkat Pradeep Allu, D Linga Raju & S Ramakrishna. (2019) Performance analysis of cryogenically treated plus tempered carbide inserts in turning of Inconel 718 using cryogenic minimum quantity lubrication cooling technique. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233:12, pages 1810-1819.
Crossref
Crossref
Sana Ehsan, Sarmad Ali Khan, Mohammad Pervez Mughal, Muhammad Qaiser Saleem & Nadeem Ahmad Mufti. (2019) Milling of Ti-6Al-4V alloy using hybrid geometry tooling. The International Journal of Advanced Manufacturing Technology 105:12, pages 5045-5059.
Crossref
Crossref
Ricardo del Risco-Alfonso, Hector R. Siller, Roberto Pérez-Rodríguez & Arturo Molina. (2019) Study of a Novel Ceramic Tool Performance in the Machining of Ti-6Al-7Nb Alloys. MRS Advances 4:55-56, pages 3007-3015.
Crossref
Crossref
Xuda Qin, Wentao Liu, Shipeng Li, Wei Tong, Xiaolai Ji, Fanjun Meng, Jianghong Liu & Erhua Zhao. (2019) A comparative study between internal spray cooling and conventional external cooling in drilling of Inconel 718. The International Journal of Advanced Manufacturing Technology 104:9-12, pages 4581-4592.
Crossref
Crossref
Jianfei Sun, Xuezhi Liao, Sen Yang & Wuyi Chen. (2019) Study on predictive modeling for thermal wear of uncoated carbide tool during machining of Ti–6Al–4V. Ceramics International 45:12, pages 15262-15271.
Crossref
Crossref
Leonardo Roberto da Silva, Odilon Soares da Silva, Francisco Vieira dos Santos, Fernando Júnio Duarte & Gustavo Valadares Veloso. (2019) Wear mechanisms of cutting tools in high-speed turning of Ti6Al4V alloy. The International Journal of Advanced Manufacturing Technology 103:1-4, pages 37-48.
Crossref
Crossref
Abdelkrem Eltaggaz & Ibrahim Deiab. (2019) Comparison of between direct and peck drilling for large aspect ratio in Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology 102:9-12, pages 2797-2805.
Crossref
Crossref
M. Ibrahim Sadik, Ernesto Coronel & Martina Lattemann. (2019) Influence of characteristic properties of PCD grades on the wear development in turning of β-titanium alloy (Ti5Al5V5Mo3Cr). Wear 426-427, pages 1594-1602.
Crossref
Crossref
Gurraj Singh, Catalin Iulian Pruncu, Munish Kumar Gupta, Mozammel Mia, Aqib Mashood Khan, Muhammad Jamil, Danil Yurievich Pimenov, Binayak Sen & Vishal S. Sharma. (2019) Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms. Materials 12:6, pages 999.
Crossref
Crossref
K. Ananthakumar, D. Rajamani, E. Balasubramanian & J. Paulo Davim. (2019) Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS. Measurement 135, pages 725-737.
Crossref
Crossref
Toshiyuki Obikawa, Zhenglong Fang, Wataru Matsumoto, Mamoru Hayashi, Hideaki Hattori & Chikara Morigo. (2019) Deposition of Trace Coolant Elements on Flank Face in Turning of mboxInconel 718 Under High Pressure Conditions. International Journal of Automation Technology 13:1, pages 41-48.
Crossref
Crossref
Xiaoliang Liang, Zhanqiang Liu & Bing Wang. (2019) State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review. Measurement 132, pages 150-181.
Crossref
Crossref
Jiyong Yi, Songyi Chen, Kanghua Chen, Yinchao Xu, Qiang Chen, Changjun Zhu & Li Liu. (2019) Effects of Ni content on microstructure, mechanical properties and Inconel 718 cutting performance of AlTiN-Ni nanocomposite coatings. Ceramics International 45:1, pages 474-480.
Crossref
Crossref
Salman Pervaiz, Saqib Anwar, Imran Qureshi & Naveed Ahmed. (2019) Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques. International Journal of Precision Engineering and Manufacturing-Green Technology 6:1, pages 133-145.
Crossref
Crossref
K. Nimel Sworna Ross & G. Manimaran. (2019) Effect of cryogenic coolant on machinability of difficult-to-machine Ni–Cr alloy using PVD-TiAlN coated WC tool. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:1.
Crossref
Crossref
K. Vetri Velmurugan, K. Venkatesan, S. Devendiran & Arun Tom Mathew. 2019. Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
179
198
.
Erliang Liu, Ning Wang, Jin Qi, Zhichao Xu, Xia Liu & Huiping Zhang. (2018) Experimental Study on the Oxidation and Diffusion Behavior of Inconel 625 and Tool Materials. Crystals 8:12, pages 471.
Crossref
Crossref
Fengbiao Wang & Yongqing Wang. (2018) Optimization of cryogenic milling parameters for aluminum honeycomb treated by ice fixation method. The International Journal of Advanced Manufacturing Technology 99:9-12, pages 2271-2281.
Crossref
Crossref
SD Castellanos, AJ Cavaleiro, AMP de Jesus, R Neto & J Lino Alves. (2018) Machinability of titanium aluminides: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442071880938.
Crossref
Crossref
Rosmahidayu Rosnan, Azwan Iskandar Azmi & Muhamad Nasir Murad. (2018) Effects of Cutting Parameters on Tool Wear and Thrust Force in Drilling Nickel-Titanium (NiTi) Alloys Using Coated and Uncoated Carbide Tools. Key Engineering Materials 791, pages 111-115.
Crossref
Crossref
Necati Uçak & Adem Çiçek. (2018) Inconel 718 süperalaşımının delinmesinde kriyojenik soğutmanın delme performansı üzerine etkilerinin araştırılması. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 2018:18-2.
Crossref
Crossref
Bing Wang & Zhanqiang Liu. (2018) Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1925-1975.
Crossref
Crossref
Fengbiao Wang & Yongqing Wang. (2018) Investigate on milling force of cryogenic cooling processing aluminum honeycomb treated by ice fixation. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1253-1265.
Crossref
Crossref
M.M. Rahman, R.M. Shahmi & H.Y. Rahman. (2018) Effect of Sintering Temperature and Holding Time to the Final Characteristics of Fecral Powder Compacts Formed at Elevated Temperature Through Die Compaction Method. Journal of Physics: Conference Series 1082, pages 012030.
Crossref
Crossref
Tse-Ming Chiu, Mohamad Mahmoudi, Wei Dai, Alaa Elwany, Hong Liang & Homero Castaneda. (2018) Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing. Electrochimica Acta 279, pages 143-151.
Crossref
Crossref
Sarmad Ali Khan, Muhammad Zubair Afzal, Muhammad Qaiser Saleem, Khalid Hussain Hashmi & Zakria Ghulam. (2018) Performance evaluation of novel chamfered inserts in high-feed turning of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology 97:5-8, pages 2319-2329.
Crossref
Crossref
Deepak Rajendra Unune, Mohsen Marani Barzani, Suhas S. Mohite & Harlal Singh Mali. (2016) Fuzzy logic-based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive-mixed electro-discharge diamond surface grinding. Neural Computing and Applications 29:9, pages 647-662.
Crossref
Crossref
Zeynep AYGÜN. (2018) Application of Spectroscopic Methods for Analysis of Ni-Based Alloys (Ni% ≥70)Ni-Esaslı Alaşımların (Ni% ≥70) Analizi için Spektroskopik Yöntemlerin Uygulanması. Cumhuriyet Science Journal 39:1, pages 144-151.
Crossref
Crossref
W. S. Yip & S. To. (2018) Ductile and brittle transition behavior of titanium alloys in ultra-precision machining. Scientific Reports 8:1.
Crossref
Crossref
S. Sartori, A. Ghiotti & S. Bruschi. (2018) Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning. Tribology International 118, pages 287-294.
Crossref
Crossref
Chakradhar Bandapalli, Bharatkumar Mohanbhai Sutaria & Dhananjay Vishnu Prasad Bhatt. 2018. Titanium Alloys - Novel Aspects of Their Processing [Working Title]. Titanium Alloys - Novel Aspects of Their Processing [Working Title].
C H Hoe, M M Reddy, V C C Lee & S Debnath. (2018) Chatter Behavior in the Milling Process of Inconel 718: Effects of Tool Edge Radius. MATEC Web of Conferences 202, pages 02006.
Crossref
Crossref
A. Palanisamy & T. Selvaraj. (2018) Optimization of Machining Parameters for Dry Turning of Incoloy 800H Using Taguchi - Based Grey Relational Analysis. Materials Today: Proceedings 5:2, pages 7708-7715.
Crossref
Crossref
Necati Uçak & Adem Çiçek. (2018) The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills. Journal of Manufacturing Processes 31, pages 662-673.
Crossref
Crossref
Yogesh V. Deshpande, Atul B. Andhare & Pramod M. Padole. (2018) Experimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:1.
Crossref
Crossref
Nurul Razak, Zhan Chen & Timotius Pasang. (2017) Effects of Increasing Feed Rate on Tool Deterioration and Cutting Force during End Milling of 718Plus Superalloy Using Cemented Tungsten Carbide Tool. Metals 7:10, pages 441.
Crossref
Crossref
Mingming Lu, Jiakang Zhou, Jieqiong Lin, Yan Gu, Jinguo Han & Dongpo Zhao. (2017) Study on Ti-6Al-4V Alloy Machining Applying the Non-Resonant Three-Dimensional Elliptical Vibration Cutting. Micromachines 8:10, pages 306.
Crossref
Crossref
D. Carou, E.M. Rubio, B. Agustina & M.M. Marín. (2017) Experimental study for the effective and sustainable repair and maintenance of bars made of Ti-6Al-4V alloy. Application to the aeronautic industry. Journal of Cleaner Production 164, pages 465-475.
Crossref
Crossref
Vishal John Mathai, Harshit K. Dave & Keyur P. Desai. (2016) Experimental investigations on EDM of Ti6Al4V with planetary tool actuation. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:9, pages 3467-3490.
Crossref
Crossref
Feng Wang, Jianshe Zhao, Yanming Lv, Zhenwen Yang, Jun Yao, Yafeng He & Zongjun Tian. (2017) Electrochemical machining of deep narrow slits on TB6 titanium alloys. The International Journal of Advanced Manufacturing Technology 92:5-8, pages 3063-3071.
Crossref
Crossref
Fengbiao Wang, Jingkai Liu, Lili Li & Qilin Shu. (2017) Green machining of aluminum honeycomb treated using ice fixation in cryogenic. The International Journal of Advanced Manufacturing Technology 92:1-4, pages 943-952.
Crossref
Crossref
Vishal J. Mathai, Harshit K. Dave & Keyur P. Desai. (2017) Study on Effect of Process Parameters on End Wear of Tool Electrode during Planetary EDM of Ti-6Al-4V. International Journal of Materials, Mechanics and Manufacturing 5:3, pages 159-163.
Crossref
Crossref
C.P. Ma, Y.C. Guan & W. Zhou. (2017) Laser polishing of additive manufactured Ti alloys. Optics and Lasers in Engineering 93, pages 171-177.
Crossref
Crossref
Iyas Khader, Alexander Renz & Andreas Kailer. (2017) A wear model for silicon nitride in dry sliding contact against a nickel-base alloy. Wear 376-377, pages 352-362.
Crossref
Crossref
Deepak Rajendra Unune & Harlal Singh Mali. (2017) Experimental investigation on low-frequency vibration assisted micro-WEDM of Inconel 718. Engineering Science and Technology, an International Journal 20:1, pages 222-231.
Crossref
Crossref
Ming Luo, Jing Wang, Baohai Wu & Dinghua Zhang. (2017) Effects of cutting parameters on tool insert wear in end milling of titanium alloy Ti6Al4V. Chinese Journal of Mechanical Engineering 30:1, pages 53-59.
Crossref
Crossref
Bapi Sarkar, Moola Mohan Reddy & Sujan Debnath. (2017) Effect of machining parameters on surface finish of Inconel 718 in end milling. MATEC Web of Conferences 95, pages 02009.
Crossref
Crossref
Mahros Darsin, Tim Pasang & Zhan Chen. (2017) Performance of TiAlN PVD Coated Carbide Drill when Drilling Titanium 6246 Alloy. MATEC Web of Conferences 109, pages 02001.
Crossref
Crossref
Mohammad Akmal, K.S. Ehsan Layegh, Ismail Lazoglu, Ali Akgün & Çağlar Yavaş. (2017) Friction Coefficients on Surface Finish of AlTiN Coated Tools in the Milling of Ti6Al4V. Procedia CIRP 58, pages 596-600.
Crossref
Crossref
Gopala Rao Thellaputta, Pulcharu Subhash Chandra & C.S.P. Rao. (2017) Machinability of Nickel Based Superalloys: A Review. Materials Today: Proceedings 4:2, pages 3712-3721.
Crossref
Crossref
Harlal Singh Mali & Deepak Rajendra Unune. 2017. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Salman Pervaiz, Amir Rashid, Ibrahim Deiab & Cornel Mihai Nicolescu. (2016) An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V). The International Journal of Advanced Manufacturing Technology 87:5-8, pages 1371-1386.
Crossref
Crossref
N. H. Razak, Z. W. Chen & T. Pasang. (2016) Progression of tool deterioration and related cutting force during milling of 718Plus superalloy using cemented tungsten carbide tools. The International Journal of Advanced Manufacturing Technology 86:9-12, pages 3203-3216.
Crossref
Crossref
Xiong Ruibin & Hongbing Wu. (2016) Study on cutting mechanism of Ti6Al4V in ultra-precision machining. The International Journal of Advanced Manufacturing Technology 86:5-8, pages 1311-1317.
Crossref
Crossref
A.G. Rao, V.P. Deshmukh, N. Prabhu & B.P. Kashyap. (2016) Enhancing the machinability of hypereutectic Al-30Si alloy by friction stir processing. Journal of Manufacturing Processes 23, pages 130-134.
Crossref
Crossref
Hong Bing Wu & Sandy To. (2015) Effects of electropulsing treatment on material properties and ultra-precision machining of titanium alloy. The International Journal of Advanced Manufacturing Technology 82:9-12, pages 2029-2036.
Crossref
Crossref
Zhiyang Huang, Shaojie He, Zhuang Kejia, Xiaoming Zhang & Han Ding. (2016) An Analysis of Cutting Parameters, Coated Materials and Nose Radii on Residual Stresses When Turning Inconel 718. Procedia CIRP 46, pages 368-371.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Crossref
M. Balasubramanian. (2015) Characterization of diffusion-bonded titanium alloy and 304 stainless steel with Ag as an interlayer. The International Journal of Advanced Manufacturing Technology 82:1-4, pages 153-162.
Crossref
Crossref
N. H. Sateesh, G. C. Mohan Kumar & Prasad Krishna. (2015) Influence of Ni-P Coated SiC and Laser Scan Speed on the Microstructure and Mechanical Properties of IN625 Metal Matrix Composites. Lasers in Manufacturing and Materials Processing 2:4, pages 187-198.
Crossref
Crossref
Nandkumar N. Bhopale, Nilesh Nikam & Raju S. Pawade. (2015) Parameter Optimization of Ball End Milling Process on Inconel 718 Using RSM and TLBO Algorithm. Journal for Manufacturing Science and Production 15:3, pages 293-300.
Crossref
Crossref
R. Ravi Raja Malarvannan, T.V. Moorthy & Samraj Ravi. (2015) Improvement of Wear Performance of High Speed Steel Tool Using Physical Vapour Deposition Coating Process. Applied Mechanics and Materials 787, pages 391-395.
Crossref
Crossref
Hongbing Wu & Shaojian Zhang. (2014) Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V. The International Journal of Advanced Manufacturing Technology 77:9-12, pages 2235-2240.
Crossref
Crossref
Rachid M'Saoubi(1)(1), Dragos Axinte(1)(1), Sein Leung Soo(2)(2), Christoph Nobel, Helmi Attia(1)(1), Gregor Kappmeyer(3)(3), Serafettin Engin(3)(3) & Wei-Ming Sim. (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Annals 64:2, pages 557-580.
Crossref
Crossref
Cornelius J. Pretorius, Sein Leung Soo, David K. Aspinwall, Peter M. Harden, Rachid M'Saoubi & Andrew L. Mantle. (2015) Tool wear behaviour and workpiece surface integrity when turning Ti–6Al–2Sn–4Zr–6Mo with polycrystalline diamond tooling. CIRP Annals 64:1, pages 109-112.
Crossref
Crossref
Farrukh Hafeez, Deviprakash Jyothishmathi Devan, Jamal Sheikh-Ahmad & Fahad Almaskari. (2022) Wear Mechanism and Quantification of Polycrystalline Diamond Milling Cutter in High Speed Trimming of Carbon Fiber Reinforced Epoxy. SSRN Electronic Journal.
Crossref
Crossref