Shengsheng Zhang, Jianping Zhou, Guoyu Hu, Lizhong Wang & Yan Xu. (2023) Process characteristics of electrochemical discharge machining and hybrid methods: a review. The International Journal of Advanced Manufacturing Technology 129:5-6, pages 1933-1963.
Crossref
Dil Bahar, Akshay Dvivedi & Pradeep Kumar. (2023) An investigation of energy utilization behavior on borosilicate glass through heating and stirring of the electrolyte in electro-chemical discharge machining. Journal of Applied Electrochemistry.
Crossref
Anurag Singh & Apurbba Kumar Sharma. (2023) Analyses of Low-Power Microwave Drilling of Stainless Steel-304. Journal of Materials Engineering and Performance.
Crossref
Pravin Pawar, Amaresh Kumar & Raj Ballav. 2023. Hybrid Micromachining and Microfabrication Technologies. Hybrid Micromachining and Microfabrication Technologies
17
100
.
Sourav P S, Shashank Singh & Anup Malik. (2023) A review on micro-drilling by electrochemical discharge machining. Engineering Research Express 5:2, pages 022004.
Crossref
Yue Ma, Zhiqiang Liang, Kun Wan, Rongbin Cai, Linfeng Yi, Jianfei Li, Fei Wang, Xu Zhao, Rui Chen & Xibin Wang. (2023) Development of a New Micro Drilling Tool with H-Shaped Chisel Edge. Metals 13:3, pages 608.
Crossref
Sahil Grover, Sarbjit Singh & S.K. Mangal. (2023) Hybridization of μ-electrochemical discharge machining (μ-ECDM) process: A review. Materials Today: Proceedings 80, pages 499-508.
Crossref
Gaurav Yadav, Riya Choudhary, Himanshu Bhardwaj & B. K. Bhuyan. 2023. Recent Advances in Intelligent Manufacturing. Recent Advances in Intelligent Manufacturing
199
217
.
K. V. J. Bhargav, P. Shanthan, P. S. Balaji & Ranjeet Kumar Sahu. 2023. Advanced Engineering Optimization Through Intelligent Techniques. Advanced Engineering Optimization Through Intelligent Techniques
75
86
.
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. 2023. Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Advances in Modelling and Optimization of Manufacturing and Industrial Systems
135
148
.
Dheeraj Soni, B. D. Gidwani & R. Shringi. 2023. Advances in Manufacturing Engineering. Advances in Manufacturing Engineering
41
53
.
Manpreet Singh, Sarbjit Singh, Jatinder Kaur Arora, Parvesh Antil, Ankit D. Oza, Dumitru Doru Burduhos-Nergis & Diana Petronela Burduhos-Nergis. (2022) Multi Response Optimization of ECDM Process for Generating Micro Holes in CFRP Composite Using TOPSIS Methodology. Polymers 14:23, pages 5291.
Crossref
Uzair Khaleeq uz Zaman, Usman Ahmed Khan, Shahid Aziz, Aamer Ahmed Baqai, Sajid Ullah Butt, Danish Hussain, Ali Siadat & Dong Won Jung. (2022) Optimization of Wire Electric Discharge Machining (WEDM) Process Parameters for AISI 1045 Medium Carbon Steel Using Taguchi Design of Experiments. Materials 15:21, pages 7846.
Crossref
Sahil Sharma, Tarlochan Singh & Akshay Dvivedi. (2022) A Review on Developments in Electrolytes and their Feeding Methods for ECDM Process. Silicon.
Crossref
K. V. J. Bhargav, P. S. Balaji, Ranjeet Kumar Sahu & Moussa Leblouba. (2022) Experimental investigation on machining characteristics of titanium processed using electrolyte sonicated µ-ECDM system. Scientific Reports 12:1.
Crossref
Niladri Mandal, Sergej Hloch & Alok Kumar Das. (2022) Comparison of Maraging Steel Surface Integrity in Hybrid and Conventional Micro-ECDM Processes. Materials 15:13, pages 4378.
Crossref
Manoj Nikam, Tribeni Roy & Sachin Mastud. (2021) Feasibility of Inducing Superhydrophobicity on Laser-Textured Surfaces: Development of Mathematical Model and Experimental Investigations. Journal of Advanced Manufacturing Systems 21:01, pages 143-178.
Crossref
Aniket D. Mohitkar, Nav Rattan & Rahul S. Mulik. (2021) Improvement in Machining Performances of SiC Workpiece Using TW-Electro Chemical Spark Machining. Silicon 14:4, pages 1369-1379.
Crossref
Aruna Thakur, Mukesh Tak & Rakesh G. Mote. (2022) Suitability of electrolytes and anodic dissolution behavior of 17-4 PH stainless steel. Materials Today: Proceedings 50, pages 2528-2535.
Crossref
Mukund Harugade, Sachin Waigaonkar & Nandkishor Dhawale. (2021) A novel approach for removal of delaminated fibers of a reinforced composites using electrochemical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:12, pages 1949-1960.
Crossref
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. (2021) Review on Recent Advances, Research Trends, and Gas Film in Electrochemical Discharge-Based Micromachining. Journal of Micro and Nano-Manufacturing 9:1.
Crossref
Viveksheel Rajput, Mudimallana Goud & Narendra Mohan Suri. (2021) Review—Electrochemical Discharge Machining: Gas Film Electrochemical Aspects, Stability Parameters, and Research Work. Journal of The Electrochemical Society 168:1, pages 013503.
Crossref
Gaurav Saini, Amresh Kumar, Sachin Mohal, Rajender Kumar & Abhishek Chauhan. (2021) Electrochemical discharge machining process, variants and hybridization: A review. IOP Conference Series: Materials Science and Engineering 1033:1, pages 012070.
Crossref
B.K. Bhuyan, Tarun, Jalaj & R. Saxena. (2021) Study of the effect of process variables on output response in electro chemical discharge drilling of borosilicate glass. Materials Today: Proceedings 43, pages 335-340.
Crossref
Priti, Manpreet Singh & Sarbjit Singh. (2021) Micro-Machining of CFRP composite using electrochemical discharge machining and process optimization by Entropy-VIKOR method. Materials Today: Proceedings 44, pages 260-265.
Crossref
Nitesh Kumar, Niladri Mandal & Alok Kumar Das. 2021. Micro Electro-Fabrication. Micro Electro-Fabrication
277
315
.
R. M. Tayade, B. Doloi, B. R. Sarkar & B. Bhattacharyya. (2020) Micro-Hole Drilling on Ti6Al4V by Sequential Electro-Micro-Machining (SEMM) Approach. Journal of Advanced Manufacturing Systems 19:03, pages 499-516.
Crossref
Bijan Mallick, Sumit Biswas, Biplab Ranjan Sarkar, Biswanath Doloi & Bijoy Bhattacharyya. (2020) On Performance of Electrochemical Discharge Micro-Machining Process Using Different Electrolytes and Tool Shapes. International Journal of Manufacturing, Materials, and Mechanical Engineering 10:2, pages 49-63.
Crossref
Jansel Leyva-Bravo, Pamela Chiñas-Sanchez, Alejandra Hernandez-Rodriguez & Gerardo G. Hernandez-Alba. (2020) Electrochemical discharge machining modeling through different soft computing approaches. The International Journal of Advanced Manufacturing Technology 106:7-8, pages 3587-3596.
Crossref
Anup Malik, Swasthik Pradhan, Guravtar S. Mann, Chander Prakash & Sunpreet Singh. 2020. Encyclopedia of Renewable and Sustainable Materials. Encyclopedia of Renewable and Sustainable Materials
474
502
.
Manoj Kumar, Rahul Omprakash Vaishya & Narendra Mohan Suri. 2020. Manufacturing Engineering. Manufacturing Engineering
195
209
.
Pravin Pawar, Amaresh Kumar & Raj Ballav. (2019) Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method. Strojnícky časopis - Journal of Mechanical Engineering 69:4, pages 115-132.
Crossref
Sachin R. Peruri & Phaneendra Kiran Chaganti. (2019) A review of magnetic-assisted machining processes. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:10.
Crossref
Xianchun Shi, Shaofu Huang & Long Wang. (2019) Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode. International Journal of Electrochemical Science 14:9, pages 9239-9254.
Crossref
Chenxiang Zhang, Zhengyang Xu, Yusen Hang & Jun Xing. (2019) Effect of solution conductivity on tool electrode wear in electrochemical discharge drilling of nickel-based alloy. The International Journal of Advanced Manufacturing Technology 103:1-4, pages 743-756.
Crossref
Yong Liu, Chao Zhang, Songsong Li, Chunsheng Guo & Zhiyuan Wei. (2019) Experimental Study of Micro Electrochemical Discharge Machining of Ultra-Clear Glass with a Rotating Helical Tool. Processes 7:4, pages 195.
Crossref
Manpreet Singh & Sarbjit Singh. (2018) Electrochemical discharge machining: A review on preceding and perspective research. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:5, pages 1425-1449.
Crossref
Jaber Abu Qudeiri, Ahmad Saleh, Aiman Ziout, Abdel-Hamid Mourad, Mustufa Abidi & Ahmed Elkaseer. (2019) Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect. Materials 12:6, pages 907.
Crossref
Ravindra Nath Yadav. (2018) Electro-chemical spark machining–based hybrid machining processes: Research trends and opportunities. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:4, pages 1037-1061.
Crossref
Mukund L. Harugade, Sachin D. Waigaonkar, Nikhil S. Mane & Narayan V. Hargude. 2019. Advances in Micro and Nano Manufacturing and Surface Engineering. Advances in Micro and Nano Manufacturing and Surface Engineering
71
81
.
Sumit Bhowmik & Divya ZindaniSumit Bhowmik & Divya Zindani. 2019. Hybrid Micro-Machining Processes. Hybrid Micro-Machining Processes
61
70
.
Nav Rattan & Rahul S. Mulik. (2018) Experimental Set Up to Improve Machining Performance of Silicon Dioxide (Quartz) in Magnetic Field Assisted TW-ECSM Process. Silicon 10:6, pages 2783-2791.
Crossref
Meiling Jin, Yingdong Qu & Rongde Li. (2018) Depth of array micro-holes with large aspect ratio in Al based cast alloy. Materials Research Express 5:3, pages 036520.
Crossref
Anjali V. Kulkarni & Vijay K. Jain. 2018. Hybrid Machining. Hybrid Machining
131
160
.
Parvesh Antil, Sarbjit Singh, Alakesh Manna & Chander Prakash. 2018. Futuristic Composites. Futuristic Composites
223
243
.
Pravin Pawar, Raj Ballav & Amaresh Kumar. 2018. Simulations for Design and Manufacturing. Simulations for Design and Manufacturing
231
258
.
Manpreet Singh & Sarbjit Singh. 2018. Advanced Manufacturing and Materials Science. Advanced Manufacturing and Materials Science
139
149
.
Yong Liu, Zhiyuan Wei, Mingyu Wang & Jianhua Zhang. (2017) Experimental investigation of micro wire electrochemical discharge machining by using a rotating helical tool. Journal of Manufacturing Processes 29, pages 265-271.
Crossref
B.R. Sarkar, B. Doloi & B. Bhattacharyya. (2017) Investigation on Electrochemical Discharge Micro-Machining of Silicon Carbide. International Journal of Materials Forming and Machining Processes 4:2, pages 29-44.
Crossref
Susanta K. Sen Gupta. (2017) Contact Glow Discharge Electrolysis: A Novel Tool for Manifold Applications. Plasma Chemistry and Plasma Processing 37:4, pages 897-945.
Crossref
Mudimallana Goud, Apurbba Kumar Sharma & Chandrashekhar Jawalkar. (2016) A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate. Precision Engineering 45, pages 1-17.
Crossref
Tarlochan Singh & Akshay Dvivedi. (2016) Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods. International Journal of Machine Tools and Manufacture 105, pages 1-13.
Crossref
Lijo Paul & Somashekhar S. Hiremath. (2016) Experimental and Theoretical Investigations in ECDM Process – An Overview. Procedia Technology 25, pages 1242-1249.
Crossref
M. L. Jin, Y. D. Qu, J. H. You & R. D. Li. (2015) Casting of array micro-holes on Al components. The International Journal of Advanced Manufacturing Technology 81:5-8, pages 1017-1021.
Crossref
Susanta K Sen Gupta. (2015) Contact glow discharge electrolysis: its origin, plasma diagnostics and non-faradaic chemical effects. Plasma Sources Science and Technology 24:6, pages 063001.
Crossref
Saeed Zare Chavoshi & Xichun Luo. (2015) Hybrid micro-machining processes: A review. Precision Engineering 41, pages 1-23.
Crossref