Citations (33)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Himanshu Bisaria & Pragya Shandilya. (2023) Surface integrity of NiTi-SMA during WEDM: effect of spark parameters. Materials and Manufacturing Processes 0:0, pages 1-9.
Read now
Read now
Souradeep Dutta & Deba Kumar Sarma. (2022) Multi-response optimisation of machining parameters to minimise the overcut and circularity error during micro-EDM of nickel-titanium shape memory alloy. Advances in Materials and Processing Technologies 0:0, pages 1-21.
Read now
Read now
P Kiran, Shalini Mohanty & Alok Kumar Das. (2022) Surface modification through sustainable micro-EDM process using powder mixed bio-dielectrics. Materials and Manufacturing Processes 37:6, pages 640-651.
Read now
Read now
Deepak Rajendra Unune & Harlal Singh Mali. (2022) Dimensional accuracy and surface quality of micro-channels with low-frequency vibration assistance in micro-electro-discharge milling. Advances in Materials and Processing Technologies 8:1, pages 863-874.
Read now
Read now
Shubham Jain & Vishal Parashar. (2021) Critical review on the impact of EDM process on biomedical materials. Materials and Manufacturing Processes 36:15, pages 1701-1724.
Read now
Read now
Siddhartha Kar & Promod Kumar Patowari. (2018) Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review. Materials and Manufacturing Processes 33:14, pages 1491-1517.
Read now
Read now
Bharat C. Khatri, Pravin P. Rathod, Janak B. Valaki & C. D. Sankhavara. (2018) Insights into process innovation through ultrasonically agitated concentric flow dielectric streams for dry wire electric discharge machining. Materials and Manufacturing Processes 33:13, pages 1438-1444.
Read now
Read now
Deepak Rajendra Unune & Harlal Singh Mali. (2018) Experimental investigation on low-frequency vibration-assisted µ-ED milling of Inconel 718. Materials and Manufacturing Processes 33:9, pages 964-976.
Read now
Read now
Wujun Feng, Xuyang Chu, Yongqiang Hong & Li Zhang. (2018) Studies on the surface of high-performance alloys machined by micro-EDM. Materials and Manufacturing Processes 33:6, pages 616-625.
Read now
Read now
Xin Ji, Lin Jun Wang, Chao Min Zhang & Yi Ming Mi. (2016) Heating and Time Processes on Growth and Adhesive Property of Ta-Mo Coatings. Materials and Manufacturing Processes 31:9, pages 1269-1273.
Read now
Read now
Articles from other publishers (23)
Shubham Jaiswal, Basil Kuriachen & Jose Mathew. (2023) Experimental investigation into the evolution of microstructure and nanomechanical characterization of electric discharge deposited surface layers on Ti64. Measurement 210, pages 112544.
Crossref
Crossref
Anshuman Kumar Sahu, Siba Sankar Mahapatra, Rahul Ravi & Srinivasa Rao Bakshi. (2022) Machinability Analysis of Composite Electrode Produced by Spark Plasma Sintering Process during Electro-Discharge Machining of Titanium Alloy. Journal of Materials Engineering and Performance 32:3, pages 1310-1332.
Crossref
Crossref
Rajat Yadav & Pradeep Kumar Singh. 2023. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering
1083
1091
.
Hrishikesh Dutta, Kishore Debnath & Deba Kumar Sarma. (2022) Experimental Investigation of Parametric Effects and Characterization of the Machined Surface in μED-milling of CFRP Composite. Arabian Journal for Science and Engineering 47:12, pages 16341-16353.
Crossref
Crossref
Siddhartha Kar & Promod Kumar Patowari. (2022) An Experimental Investigation of the Erosion Phenomenon in µED-Milling of Titanium and Its Parametric Optimization Using Desirability Analysis. Arabian Journal for Science and Engineering 47:7, pages 8847-8861.
Crossref
Crossref
Muhammad Fauzan Zulkeflee, Norazkifni Faizura Dzulkifli & Azuddin Mamat. (2022) Water-in-sunflower seed oil emulsion as a dielectric fluid for micro electrical discharge machining (µEDM). Matéria (Rio de Janeiro) 27:4.
Crossref
Crossref
S. A. Mullya, G. Karthikeyan & V. S. Ganachari. (2021) Electric discharge milling: a state-of-the-art review. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:9.
Crossref
Crossref
Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2020)
Performance analysis of Cu-W-B
4
C composite tool during electrical discharge machining of titanium alloy
. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:11, pages 1992-2007.
Crossref
Crossref
K. V. Arun Pillai, P. Hariharan & R. Krishna Murthy. (2020) Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy. Silicon 13:6, pages 1827-1837.
Crossref
Crossref
Jibin T. Philip, Jose Mathew & Basil Kuriachen. (2021) Transition from EDM to PMEDM – Impact of suspended particulates in the dielectric on Ti6Al4V and other distinct material surfaces: A review. Journal of Manufacturing Processes 64, pages 1105-1142.
Crossref
Crossref
K. Debnath, H. Dutta & D. K. Sarma. 2021. Machining and Machinability of Fiber Reinforced Polymer Composites. Machining and Machinability of Fiber Reinforced Polymer Composites
207
224
.
Siddhartha Kar, Pallab Sarmah & Promod Kumar Patowari. 2021. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering
387
395
.
Deepak G. Dilip, Satyananda Panda & Jose Mathew. (2020) Characterization and Parametric Optimization of Micro-hole Surfaces in Micro-EDM Drilling on Inconel 718 Superalloy Using Genetic Algorithm. Arabian Journal for Science and Engineering 45:7, pages 5057-5074.
Crossref
Crossref
Leera Raju & Somashekhar S. Hiremath. (2020) Machining and Characterization of Micro-Channels Generated on Phosphor Bronze Using μ-EDM. Journal of Advanced Manufacturing Systems 19:01, pages 87-106.
Crossref
Crossref
Basil Kuriachen & Jose Mathew. 2020. Advances in Mechanical Engineering. Advances in Mechanical Engineering
419
427
.
Shalini Mohanty, Brij Bhushan, Alok Kumar Das & Amit Rai Dixit. (2019) Production of hard and lubricating surfaces on miniature components through micro-EDM process. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 1983-2000.
Crossref
Crossref
Siddhartha Kar & Promod Kumar Patowari. (2019) Experimental Investigation of Machinability and Surface Characteristics in Microelectrical Discharge Milling of Titanium, Stainless Steel and Copper. Arabian Journal for Science and Engineering 44:9, pages 7843-7858.
Crossref
Crossref
K. Ananthakumar, D. Rajamani, E. Balasubramanian & J. Paulo Davim. (2019) Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS. Measurement 135, pages 725-737.
Crossref
Crossref
Deepak Rajendra Unune, Chandrakant Kumar Nirala & Harlal Singh Mali. (2019) Accuracy and quality of micro-holes in vibration assisted micro-electro-discharge drilling of Inconel 718. Measurement 135, pages 424-437.
Crossref
Crossref
Roberta Nunes Nery dos Santos, Ernane Rodrigues da Silva, Victor Souza Esteves Lima & Aderci Freitas Filho. (2019) Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico. Matéria (Rio de Janeiro) 24:3.
Crossref
Crossref
Mustufa H. Abidi, Abdulrahman M. Al-Ahmari, Usama Umer & Mohammed Sarvar Rasheed. (2018) Multi-objective optimization of micro-electrical discharge machining of nickel-titanium-based shape memory alloy using MOGA-II. Measurement 125, pages 336-349.
Crossref
Crossref
Qingyu Liu, Qinhe Zhang, Kan Wang, Guang Zhu, Xiuzhuo Fu & Jianhua Zhang. (2016) Scale effects and a method for similarity evaluation in micro electrical discharge machining. Chinese Journal of Mechanical Engineering 29:6, pages 1193-1199.
Crossref
Crossref
Nurezayana Zainal, Azlan Mohd Zain & Safian Sharif. (2016) A study of electrode wear ratio on EDM of Ti-6AL-4V with copper-tungsten electrode. MATEC Web of Conferences 78, pages 01013.
Crossref
Crossref