Citations (133)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (29)
Simeon A. Babalola, Samik Dutta, Himadri Roy & Naresh C. Murmu. (2023) Deciphering the interdependent impact of process parameters in friction stir welding - Part I: an overview of the challenges and way forward. Materials and Manufacturing Processes 38:11, pages 1339-1360.
Read now
Read now
Amin Abdollahzadeh, Behrouz Bagheri & Ali Shamsipur. (2023) Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding. Materials and Manufacturing Processes 38:11, pages 1416-1425.
Read now
Read now
Santha Rao Dakarapu, Sreenivasa Reddy Karri & Sai Kishore Neelakantam. (2023) Parametric optimization of AA6061-Cu friction stir welded joints with boron carbide particle reinforcement. Materials and Manufacturing Processes 0:0, pages 1-8.
Read now
Read now
Behrouz Bagheri, Amin Abdollahzadeh & Ali Shamsipur. (2023) A different attempt to analysis friction stir spot welding of AA5083-copper alloys. Materials Science and Technology 39:9, pages 1083-1089.
Read now
Read now
Shwetanshu Gaurav, R. S. Mishra & M. Zunaid. (2023) A critical review on mechanical and microstructural properties of dissimilar aluminum (Al)-magnesium (Mg) alloys. Journal of Adhesion Science and Technology 37:7, pages 1117-1149.
Read now
Read now
K. N. Uday & G. Rajamurugan. (2023) Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review. Journal of Adhesion Science and Technology 37:5, pages 767-800.
Read now
Read now
Pragyan Paramita Mohanty. (2022) Wear of friction stir tools considering qualitative and quantitative aspects: a review. International Journal of Ambient Energy 43:1, pages 5535-5553.
Read now
Read now
Harshadkumar Jadav, Vishvesh Badheka, Gautam Upadhyay & Kush Mehta. (2022) Dissimilar welding of magnesium alloy to aluminium alloy: a review. Advances in Materials and Processing Technologies 8:4, pages 3794-3821.
Read now
Read now
Omid Karimi-Dermani, Alireza Abbasi, Ghasem Azimi Roeen & Mohammad Javad Nayyeri. (2022) A novel approach to dissimilar joining of AA7075 to AZ31B by friction stir soldering using Sn intermediate layer. Materials and Manufacturing Processes 37:8, pages 942-955.
Read now
Read now
Kush P. Mehta & Pedro Vilaça. (2022) A review on friction stir-based channeling. Critical Reviews in Solid State and Materials Sciences 47:1, pages 1-45.
Read now
Read now
Raghavendra Darji, Vishvesh Badheka, Kush Mehta, Jaydeep Joshi & Ashish Yadav. (2020) Processing of copper by keyhole gas tungsten arc welding for uniformity of weld bead geometry. Materials and Manufacturing Processes 35:15, pages 1707-1716.
Read now
Read now
Manoj Kumar Gupta. (2020) Effects of tool profile on mechanical properties of aluminium alloy Al 1120 friction stir welds. Journal of Adhesion Science and Technology 34:18, pages 2000-2010.
Read now
Read now
Virendra Pratap Singh, Surendra Kumar Patel, Nitin Kumar & Basil Kuriachen. (2019) Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: a review. Science and Technology of Welding and Joining 24:8, pages 653-684.
Read now
Read now
Gaurang R. Joshi & Vishvesh J. Badheka. (2019) Processing of bimetallic steel-copper joint by laser beam welding. Materials and Manufacturing Processes 34:11, pages 1232-1242.
Read now
Read now
Wenming Jiang, Feng Guan, Guangyu Li, Haixiao Jiang, Junwen Zhu & Zitian Fan. (2019) Processing of Al/Cu bimetal via a novel compound casting method. Materials and Manufacturing Processes 34:9, pages 1016-1025.
Read now
Read now
Padmakumar A. Bajakke, Vinayak R. Malik & Anand S. Deshpande. (2019) Particulate metal matrix composites and their fabrication via friction stir processing – a review. Materials and Manufacturing Processes 34:8, pages 833-881.
Read now
Read now
Kishan Fuse & Vishvesh Badheka. (2019) Bobbin tool friction stir welding: a review. Science and Technology of Welding and Joining 24:4, pages 277-304.
Read now
Read now
V. K. Parikh, A. D. Badgujar & N. D. Ghetiya. (2019) Joining of metal matrix composites using friction stir welding: a review. Materials and Manufacturing Processes 34:2, pages 123-146.
Read now
Read now
M. Shamsian, M. Movahedi, A. H. Kokabi & A. Ozlati. (2018) Upset-resistance welding of aluminium to copper rods: effect of interface on performance. Materials Science and Technology 34:15, pages 1830-1838.
Read now
Read now
Chengcong Zhang & Amir A. Shirzadi. (2018) Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method. Science and Technology of Welding and Joining 23:5, pages 394-399.
Read now
Read now
Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee & Manu Srivastava. (2018) A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing. Critical Reviews in Solid State and Materials Sciences 43:4, pages 334-366.
Read now
Read now
Nidhi Sharma, Arshad Noor Siddiquee, Zahid A. Khan & Mohsin T. Mohammed. (2018) Material stirring during FSW of Al–Cu: Effect of pin profile. Materials and Manufacturing Processes 33:7, pages 786-794.
Read now
Read now
Jitender Kundu & Hari Singh. (2018) Modelling and analysis of process parameters in friction stir welding of AA5083-H321 using response surface methodology. Advances in Materials and Processing Technologies 4:2, pages 183-199.
Read now
Read now
D. Jayabalakrishnan & M. Balasubramanian. (2018) Eccentric-weave FSW between Cu and AA 6061-T6 with reinforced Graphene nanoparticles. Materials and Manufacturing Processes 33:3, pages 333-342.
Read now
Read now
Sandeep Rathee, Sachin Maheshwari & Arshad Noor Siddiquee. (2018) Issues and strategies in composite fabrication via friction stir processing: A review. Materials and Manufacturing Processes 33:3, pages 239-261.
Read now
Read now
Jagesvar Verma, Ravindra Vasantrao Taiwade, Chandraprakash Reddy & Rajesh K. Khatirkar. (2018) Effect of friction stir welding process parameters on Mg-AZ31B/Al-AA6061 joints. Materials and Manufacturing Processes 33:3, pages 308-314.
Read now
Read now
D. K. Yaduwanshi, S. Bag & S. Pal. (2018) On the effect of tool offset in hybrid-FSW of copper-aluminium alloy. Materials and Manufacturing Processes 33:3, pages 277-287.
Read now
Read now
Prakash Kumar Sahu & Sukhomay Pal. (2018) Effect of FSW parameters on microstructure and mechanical properties of AM20 welds. Materials and Manufacturing Processes 33:3, pages 288-298.
Read now
Read now
Kush P. Mehta & Vishvesh J. Badheka. (2016) A Review on Dissimilar Friction Stir Welding of Copper to Aluminum: Process, Properties, and Variants. Materials and Manufacturing Processes 31:3, pages 233-254.
Read now
Read now
Articles from other publishers (104)
Huan He, Zhaoxian Liu, Yalong Zhu, Jiayu Chu, Shihao Li, Shijie Pei, Chengxiang Zhang, Ao Fu & Wenzhen Zhao. (2023) Mechanism of pin thread and flat features affecting material thermal flow behaviors and mixing in Al-Cu dissimilar friction stir welding. International Journal of Mechanical Sciences 260, pages 108615.
Crossref
Crossref
Sunil Sinhmar & Dheerendra Kumar Dwivedi. (2023) Influence of a Stationary Shoulder Friction Stir Welding Tool on the Mechanical and Corrosion Properties of AA2024 Aluminum Alloy Joints at Different Parameter Values. Journal of Materials Engineering and Performance.
Crossref
Crossref
Zongyu Dang, Guoliang Qin & Tongyi Li. (2023) Microstructure evolution and tensile strength of Al/Cu inertia friction welded joint. Journal of Materials Research and Technology 27, pages 4023-4031.
Crossref
Crossref
Xiao-Nan Wang, Jia-Le Wang, Qian Sun, Xiao-Xia Tang, Xiang Li, Kato Akira & Peng-Cheng Huan. (2023) Effects of Nanosecond Laser Scanning Paths on Weld Formation, Microstructure and Mechanical Properties of Dissimilar Ultra-Thin Al/Cu Foil Nanosecond Laser Welded Joints. Journal of Materials Engineering and Performance.
Crossref
Crossref
Heikki Karvinen, Kush P. Mehta & Pedro Vilaça. (2023) Novel manufacturing of multi-material component by hybrid friction stir channeling. CIRP Journal of Manufacturing Science and Technology 45, pages 271-284.
Crossref
Crossref
Zulai Huang, Shulei Sun, Jianhua Wang, Li Zhou, Ning Guo, Qiang Meng, Jihong Dong & Huaxia Zhao. (2023) Formation and fracture characteristics of friction stir lap joint of Alclad 2A12-T42 aluminum alloy at different tilt angles. Welding in the World 67:8, pages 1901-1910.
Crossref
Crossref
Mohamed I. A. Habba, Naser A. Alsaleh, Takwa E. Badran, Mohamed M. El-Sayed Seleman, Sabbah Ataya, Ahmed E. El-Nikhaily, Akrum Abdul-Latif & Mohamed M. Z. Ahmed. (2023) Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect. Materials 16:14, pages 5124.
Crossref
Crossref
Amin Abdollahzadeh, Behrouz Bagheri, Alireza H. Vaneghi, Ali Shamsipur & Seyyed E. Mirsalehi. (2022) Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al–Cu composite with Zn interlayer: Effect of spot pass and shoulder diameter during the pinless friction stir spot welding process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237:6, pages 1475-1494.
Crossref
Crossref
Ashif Shamim Khan, Vishvesh J. Badheka, Ashish B. Chaudhari & Vijay S. Gadakh. (2022) Experimental Investigation of Friction Stir Welding of Aluminum Alloy AA8090-T3 Using Taguchi Method. Journal of Materials Engineering and Performance 32:11, pages 4787-4795.
Crossref
Crossref
Abhishek Mandal, John Deb Barma & Gautam Majumdar. (2023) Effect of Tool Pin Geometries on Weld Quality of Al/Cu Dissimilar Friction Stir Welding. Journal of The Institution of Engineers (India): Series D.
Crossref
Crossref
Viresh Payak, Jawahar Paulraj, Barnik Saha Roy, Manish Bhargava & Pritam Das. (2023) A review on recent development in aluminium-copper friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311582.
Crossref
Crossref
Sanjeev Kumar, Jitendra Kumar Katiyar & Barnik Saha Roy. (2023) Influence of tool tilt angle on physical, thermal, and mechanical properties of friction stir welded Al-Cu-Li alloys. Materials Today Communications 34, pages 105348.
Crossref
Crossref
Surendra Kumar Lader, Mayuri Baruah & Raj Ballav. (2023) Significance of underwater friction stir welding on the weld integrity of thin sheets of aluminum (AA1050-O) and brass (CuZn34) joints. Materials Science and Engineering: A 865, pages 144627.
Crossref
Crossref
Huihui Yang, Zijue Tang, Le Wan, Qianglong Wei, Jiayin Wu, An Wang, Xinyuan Jin, Xianfeng Li, Yi Wu, Guojie Lu, Hongze Wang & Haowei Wang. (2023) Achieving crack-free CuCrZr/AlSi7Mg interface by infrared-blue hybrid laser cladding with low power infrared laser. Journal of Alloys and Compounds 931, pages 167572.
Crossref
Crossref
Wazir Hassan Khalafe, Ewe Lay Sheng, Mohd Rashdan Bin Isa, Abdoulhadi Borhana Omran & Shazarel Bin Shamsudin. (2022) The Effect of Friction Stir Welding Parameters on the Weldability of Aluminum Alloys with Similar and Dissimilar Metals: Review. Metals 12:12, pages 2099.
Crossref
Crossref
Huihui Yang, Jiayin Wu, Qianglong Wei, Zijue Tang, An Wang, Xinyuan Jin, Xianfeng Li, Yi Wu, Guojie Lu, Haowei Wang & Hongze Wang. (2022) Stable cladding of high reflectivity pure copper on the aluminum alloy substrate by an infrared-blue hybrid laser. Additive Manufacturing Letters 3, pages 100040.
Crossref
Crossref
J. X. Tang, L. Shi, C. S. Wu, M. X. Wu & S. Gao. (2022) Microstructure and Mechanical Properties of Dissimilar Double-Side Friction Stir Welds Between Medium-Thick 6061-T6 Aluminum and Pure Copper Plates. Acta Metallurgica Sinica (English Letters) 35:12, pages 2027-2046.
Crossref
Crossref
Bahman Meyghani & Mokhtar Awang. (2022) The Influence of the Tool Tilt Angle on the Heat Generation and the Material Behavior in Friction Stir Welding (FSW). Metals 12:11, pages 1837.
Crossref
Crossref
Amit Kumar Kundu, Manoj Kumar Gupta, Nitesh Singh Rajput & Rajesh Rathore. (2022) Adhesive assisted TiB2 coating effects on friction stir welded joints. Scientific Reports 12:1.
Crossref
Crossref
Gaurang R. Joshi, Vishvesh J. Badheka, Raghavendra S. Darji, Ankit D. Oza, Vivek J. Pathak, Dumitru Doru Burduhos-Nergis, Diana Petronela Burduhos-Nergis, Gautam Narwade & Gopinath Thirunavukarasu. (2022) The Joining of Copper to Stainless Steel by Solid-State Welding Processes: A Review. Materials 15:20, pages 7234.
Crossref
Crossref
Hatice Varol Özkavak. (2022) Joining Cu30Zn (Brass) and AA6063 Alloys Using the Mechanical Locking Method. Russian Journal of Non-Ferrous Metals 63:5, pages 560-572.
Crossref
Crossref
Ravi Butola & Priyansh Singh. (2022) Review—Parametric Study and Various Strategies of Aluminium Metal Matrix Composites Fabricated by Friction Sir Processing. ECS Journal of Solid State Science and Technology 11:9, pages 093001.
Crossref
Crossref
Soumyadeep Sen & Jayaprakash Murugesan. (2022) Experimental and numerical analysis of friction stir welding: a review. Engineering Research Express 4:3, pages 032004.
Crossref
Crossref
G N ShivaKumar & G Rajamurugan. (2022) Friction stir welding of dissimilar alloy combinations—A Review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:12, pages 6688-6705.
Crossref
Crossref
Hardik D. Vyas, Kush P. Mehta, Vishvesh Badheka & Bharat Doshi. (2022) Microstructure evolution and mechanical properties of continuous drive friction welded dissimilar copper-stainless steel pipe joints. Materials Science and Engineering: A 832, pages 142444.
Crossref
Crossref
Rahul Kesharwani, Kishor Kumar Jha, Chiranjit Sarkar & Murshid Imam. (2022) Numerical and experimental analysis on friction stir welding of the dissimilar materials 6061-T6 AA and pure copper. Materials Today: Proceedings 65, pages 3132-3142.
Crossref
Crossref
Keegan Zass, Sipokazi Mabuwa & Velaphi Msomi. (2022) A review on reinforced particles used on the production of FSP composites. Materials Today: Proceedings 56, pages 2392-2397.
Crossref
Crossref
Gaurav Kumar, Varun Sharma, Rakesh Kumar, Ankit Thakur, Navdeep Minhas & Om Prakash Verma. 2022. Recent Innovations in Mechanical Engineering. Recent Innovations in Mechanical Engineering
221
229
.
Sanjay Sharma, Amit HandaSahib Sartaj Singh. (2021) Influencing Geometrical Parameters of Tools in Friction Stirring Technology: A Short Review. Strojnícky časopis - Journal of Mechanical Engineering 71:2, pages 257-290.
Crossref
Crossref
Mohammad Syahid Mohd Isa, Kaveh Moghadasi, Mohammad Ashraf Ariffin, Sufian Raja, Mohd Ridha bin Muhamad, Farazila Yusof, Mohd Fadzil Jamaludin, Nukman bin Yusoff & Mohd Sayuti bin Ab Karim. (2021) Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review. Journal of Materials Research and Technology 15, pages 2735-2780.
Crossref
Crossref
Ankit Thakur, Varun Sharma & Shailendra Singh Bhadauria. (2021) Effect of tool tilt angle on weld joint strength and microstructural characterization of double-sided friction stir welding of AZ31B magnesium alloy. CIRP Journal of Manufacturing Science and Technology 35, pages 132-145.
Crossref
Crossref
Umesh Kumar Singh & Avanish Kumar Dubey. (2021) Effect of process parameters in friction stir welding of dissimilar magnesium alloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:10.
Crossref
Crossref
Subramanya R Prabhu, Arun Shettigar, Mervin A Herbert & Shrikantha S Rao. (2021) Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA. Engineering Research Express 3:3, pages 035035.
Crossref
Crossref
Xi Chen, Meng Jiang, Yanbin Chen, Zhenglong Lei, Sicong Zhao & Sanbao Lin. (2021) Laser welding-brazing under temporal and spatial power modulation for dissimilar materials AA6061 to Ti6Al4V joints. Manufacturing Letters 29, pages 70-73.
Crossref
Crossref
Mayank Verma, Shuja Ahmed & Probir Saha. (2021) Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): A comprehensive review. Journal of Manufacturing Processes 68, pages 249-276.
Crossref
Crossref
Pingqiang Gao, Yan Zhang & Kush P. Mehta. (2020) Metallurgical and Mechanical Properties of Al–Cu Joint by Friction Stir Spot Welding and Modified Friction Stir Clinching. Metals and Materials International 27:8, pages 3085-3094.
Crossref
Crossref
Kush Mehta, Antonello Astarita, Pierpaolo Carlone, Roberta Della Gatta, Hardik Vyas, Pedro Vilaça & Fausto Tucci. (2021) Investigation of exit-hole repairing on dissimilar aluminum-copper friction stir welded joints. Journal of Materials Research and Technology 13, pages 2180-2193.
Crossref
Crossref
Virendra Pratap Singh, Surendra Kumar Patel & Basil Kuriachen. (2021) Mechanical and microstructural properties evolutions of various alloys welded through cooling assisted friction-stir welding: A review. Intermetallics 133, pages 107122.
Crossref
Crossref
Aina Opsal Bakke, Lars Arnberg & Yanjun Li. (2021) Achieving high-strength metallurgical bonding between A356 aluminum and copper through compound casting. Materials Science and Engineering: A 810, pages 140979.
Crossref
Crossref
Félix Alan Montes-González, Nelly Abigaíl Rodríguez-Rosales, Juan Carlos Ortiz-Cuellar, Carlos Rodrigo Muñiz-Valdez, Josué Gómez-Casas, Jesús Salvador Galindo-Valdés & Oziel Gómez-Casas. (2021) Experimental Analysis and Mathematical Model of FSW Parameter Effects on the Corrosion Rate of Al 6061-T6-Cu C11000 Joints. Crystals 11:3, pages 294.
Crossref
Crossref
Mohamed H. El‐Moayed, Ahmed Y. Shash, Mahmoud Abd Rabou & Mahmoud G. El‐Sherbiny. (2020) A detailed process design for conventional friction stir welding of aluminum alloys and an overview of related knowledge. Engineering Reports 3:2.
Crossref
Crossref
Ajay Kumar P., Vishnu Namboodiri V.Gaurang Joshi & Kush P. Mehta. (2021) Fabrication and applications of fullerene-based metal nanocomposites: A review. Journal of Materials Research 36:1, pages 114-128.
Crossref
Crossref
Haitao Luo, Fengqun Zhao, Siwei Guo, Changshuai Yu, Guangming Liu & Tingke Wu. (2021) Mechanical performance research of friction stir welding robot for aerospace applications. International Journal of Advanced Robotic Systems 18:1, pages 172988142199654.
Crossref
Crossref
Hardik D. Vyas, Kush P. Mehta, Vishvesh Badheka & Bharat Doshi. (2021) Processing and evaluation of dissimilar Al-SS friction welding of pipe configuration: Nondestructive inspection, properties, and microstructure. Measurement 167, pages 108305.
Crossref
Crossref
Ashish M. Desai, Bharat C. Khatri, Vivek Patel & Harikrishna Rana. (2021) Friction stir welding of AZ31 magnesium alloy: A review. Materials Today: Proceedings 47, pages 6576-6584.
Crossref
Crossref
Raj Kumar, Vikas Upadhyay & Chaitanya Sharma. (2021) Effect of welding parameters in friction stir welding of dissimilar alloys AA2014 and AA7075. Materials Today: Proceedings 47, pages 6551-6555.
Crossref
Crossref
Uttam Acharya, Barnik Saha Roy & Subhash Chandra Saha. (2020) On the Role of Tool Tilt Angle on Friction Stir Welding of Aluminum Matrix Composites. Silicon 13:1, pages 79-89.
Crossref
Crossref
Kartikeya Bector, Aranyak Tripathi, Divya Pandey, Ravi Butola & Ranganath M. Singari. 2021. Advances in Manufacturing and Industrial Engineering. Advances in Manufacturing and Industrial Engineering
1
11
.
Yue Mao, Yu Ni, Xuan Xiao, Dingqiang Qin & Li Fu. (2020) Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets. Journal of Manufacturing Processes 60, pages 356-365.
Crossref
Crossref
Ming Zhai, ChuanSong Wu & Hao Su. (2020) Influence of tool tilt angle on heat transfer and material flow in friction stir welding. Journal of Manufacturing Processes 59, pages 98-112.
Crossref
Crossref
Tanmoy Medhi, Syed Abou Iltaf Hussain, Barnik Saha Roy & Subhash Chandra Saha. (2020) Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:10.
Crossref
Crossref
Hui-Jie Zhang, Hui-Jie Liu, Jian-Ling Song, Qiu-Zhi Gao & Shao-Hua Luo. (2020) Influence of Tool Offset on Performance of Thin Al–Cu Dissimilar Metal Friction Stir Butt Welded Joint. Transactions of the Indian Institute of Metals 73:10, pages 2549-2559.
Crossref
Crossref
S. M. Senthil, R. Parameshwaran, S. Ragu Nathan, M. Bhuvanesh Kumar & K. Deepandurai. (2020) A multi-objective optimization of the friction stir welding process using RSM-based-desirability function approach for joining aluminum alloy 6063-T6 pipes. Structural and Multidisciplinary Optimization 62:3, pages 1117-1133.
Crossref
Crossref
Hengming Zhang, Yu Shi, Yufen Gu & Chunkai Li. (2020) Effect of Different Filler Wires on Mechanical Property and Conductivity of Aluminum-Copper Joints. Materials 13:16, pages 3648.
Crossref
Crossref
Musa Muhammed, Mazli Mustapha, Turnad Lenggo Ginta, Abdullah Musa Ali, Faizal Mustapha & Chima Cyril Hampo. (2020) Statistical Review of Microstructure-Property Correlation of Stainless Steel: Implication for Pre- and Post-Weld Treatment. Processes 8:7, pages 811.
Crossref
Crossref
Virendra Pratap Singh, Surendra Kumar Patel, Alok Ranjan & Basil Kuriachen. (2020) Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: a critical review. Journal of Materials Research and Technology 9:3, pages 6217-6256.
Crossref
Crossref
Rahul Kesharwani, Murshid Imam & Chiranjit Sarkar. (2020) Clarification on the choice of sheet positioning in friction stir welding of dissimilar materials. Manufacturing Letters 24, pages 100-104.
Crossref
Crossref
Rajendra shimpi, Cheruku Sandesh Kumar & Rajnish katarane. (2020) Friction Stir Welding Processing, Materials and its Applications.. IOP Conference Series: Materials Science and Engineering 810:1, pages 012035.
Crossref
Crossref
Hardik Vyas, Kush P. Mehta, Vishvesh Badheka & Bharat Doshi. (2020) Pipe-to-pipe friction welding of dissimilar Al-SS joints for cryogenic applications. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:2.
Crossref
Crossref
Omkar Mypati, Abhijit Sadhu, Suryakanta Sahu, Debasish Mishra, Surjya K Pal, Shiv Brat Singh & Prakash Srirangam. (2019) Enhancement of joint strength in friction stir lap welding between AA6061 and AISI 304 by adding diffusive coating agents. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:1-2, pages 204-217.
Crossref
Crossref
Mrunal Panchal, Devax Patel, Hardik Vyas & Kush Mehta. (2020) Ultra-thin friction stir welding on Aluminum alloy. Materials Today: Proceedings 26, pages 2888-2894.
Crossref
Crossref
H.M. Anil Kumar & V. Venkata Ramana. (2020) Influence of tool parameters on the tensile properties of friction stir welded aluminium 5083 and 6082 alloys. Materials Today: Proceedings 27, pages 951-957.
Crossref
Crossref
Santosh Kumar Sahu, Nimai Haldar, Saurav Datta & Rajneesh Kumar. (2020) Experimental studies on AA6063-Cu dissimilar friction stir welding using Inconel 601 tool. Materials Today: Proceedings 26, pages 180-188.
Crossref
Crossref
Navneet Khanna, Prachi Sharma, Mahesh Bharati & Vishvesh J. Badheka. (2019) Friction stir welding of dissimilar aluminium alloys AA 6061-T6 and AA 8011-h14: a novel study. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:1.
Crossref
Crossref
Padmakumar A. Bajakke, Sudhakar C. Jambagi, Vinayak R. Malik & Anand S. Deshpande. 2020. Surface Engineering of Modern Materials. Surface Engineering of Modern Materials
1
31
.
Navneet Khanna, Mahesh Bharati, Prachi Sharma & Vishvesh J. Badheka. (2019) Design-of-experiments application in the friction stir welding of aluminium alloy AA 8011-h14 for structural application. Multidiscipline Modeling in Materials and Structures 16:3, pages 606-622.
Crossref
Crossref
A.R. Torabi, M.H. Kalantari, M.R.M. Aliha & S.M.N. Ghoreishi. (2019) Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion. Theoretical and Applied Fracture Mechanics 104, pages 102369.
Crossref
Crossref
Nora Osman, Zainuddin Sajuri, Amir Hossein Baghdadi & Mohd Zaidi Omar. (2019) Effect of Process Parameters on Interfacial Bonding Properties of Aluminium–Copper Clad Sheet Processed by Multi-Pass Friction Stir-Welding Technique. Metals 9:11, pages 1159.
Crossref
Crossref
A. Esmaeili, C. Sbarufatti & A. M. S. Hamouda. (2019) Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review. Metallography, Microstructure, and Analysis 8:4, pages 445-461.
Crossref
Crossref
Subramanya R Prabhu B, Arun K Shettigar, Mervin A Herbert & Shrikantha S Rao. (2019) Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite. Materials Research Express 6:8, pages 0865i7.
Crossref
Crossref
Wenming Liu, Yifu Shen, Chao Guo, Yinfei Yan, Ruiyang Ni & Wentao Hou. (2019) Effect of traverse speed in submerged friction stir welding ME20M magnesium alloy: microstructure and mechanical properties. Materials Research Express 6:8, pages 086579.
Crossref
Crossref
Amit Goyal & Ramesh Kumar Garg. (2019) Parametric optimization of friction stir welding process for marine grade aluminum alloy. International Journal of Structural Integrity 10:2, pages 162-175.
Crossref
Crossref
Gaurang R. Joshi & Vishvesh J. Badheka. (2019) Studies on Tool Shoulder Diameter of Dissimilar Friction Stir Welding Copper to Stainless Steel. Metallography, Microstructure, and Analysis 8:2, pages 263-274.
Crossref
Crossref
Kan Li, Xuemei Liu & Yi Zhao. (2019) Research Status and Prospect of Friction Stir Processing Technology. Coatings 9:2, pages 129.
Crossref
Crossref
Amit Goyal & Ramesh Kumar Garg. (2019) Mechanical and microstructural behaviour of Al-Mg4.2 alloy friction stir butt welds. Materials Research Express 6:5, pages 056514.
Crossref
Crossref
Amit Goyal & Ramesh Kumar Garg. (2018) Establishing Mathematical Relationships to Study Tensile Behavior of Friction Stir Welded AA5086-H32 Aluminium Alloy Joints. Silicon 11:1, pages 51-65.
Crossref
Crossref
M H Montazerian, M Movahedi & M R Jondi. (2019) Effect of graphene and process parameters on mechanical performance and electrical resistance of aluminum to copper friction stir joint. Materials Research Express 6:4, pages 046561.
Crossref
Crossref
Kush P. Mehta. (2018) A review on friction-based joining of dissimilar aluminum–steel joints. Journal of Materials Research 34:1, pages 78-96.
Crossref
Crossref
Chenghang Zhang, Guangjie Huang, Yu Cao, Xiaodong Wu, Xinde Huang & Qing Liu. (2018) Optimization of Tensile and Corrosion Properties of Dissimilar Friction Stir Welded AA2024-7075 Joints. Journal of Materials Engineering and Performance 28:1, pages 183-199.
Crossref
Crossref
Mukuna Patrick Mubiayi, Esther Titilayo Akinlabi & Mamookho Elizabeth MakhathaMukuna Patrick Mubiayi, Esther Titilayo Akinlabi & Mamookho Elizabeth Makhatha. 2019. Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW). Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW)
17
65
.
Mukuna Patrick Mubiayi, Esther Titilayo Akinlabi & Mamookho Elizabeth MakhathaMukuna Patrick Mubiayi, Esther Titilayo Akinlabi & Mamookho Elizabeth Makhatha. 2019. Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW). Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW)
1
16
.
Kush P. Mehta. 2019. Innovations in Manufacturing for Sustainability. Innovations in Manufacturing for Sustainability
125
145
.
Narges Dialami, Miguel Cervera & Michele Chiumenti. (2018) Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding. Metals 9:1, pages 28.
Crossref
Crossref
Kulwant Singh, Gurbhinder Singh & Harmeet Singh. (2018) Review on friction stir welding of magnesium alloys. Journal of Magnesium and Alloys 6:4, pages 399-416.
Crossref
Crossref
Farhad Bakhtiari Argesi, Ali Shamsipur & Seyyed Ehsan Mirsalehi. (2018) Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding. Acta Metallurgica Sinica (English Letters) 31:11, pages 1183-1196.
Crossref
Crossref
Shuai Zhang, Qingyu Shi, Qu Liu, Ruishan Xie, Gong Zhang & Gaoqiang Chen. (2018) Effects of tool tilt angle on the in-process heat transfer and mass transfer during friction stir welding. International Journal of Heat and Mass Transfer 125, pages 32-42.
Crossref
Crossref
Amit Goyal & Ramesh Kumar Garg. (2018) Selection of FSW Tool Parameters for Joining Al-Mg4.2 Alloy: An Experimental Approach. Metallography, Microstructure, and Analysis 7:5, pages 524-532.
Crossref
Crossref
Peng Li, Longwei Pan, Xiaohu Hao, Shuai Li & Honggang Dong. (2018) Effect of post-weld heat treatment on inhomogeneity of aluminum/copper rotary friction welded joint. Materials Research Express 5:9, pages 096504.
Crossref
Crossref
R. Beygi, M. Zarezadeh Mehrizi, D. Verdera & A. Loureiro. (2018) Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals. Journal of Materials Processing Technology 255, pages 739-748.
Crossref
Crossref
Shailesh N. Pandya & Jyoti Menghani. (2018) Optimum heat source position offset in welding of dissimilar Al-Cu metals using a theoretical approach. Materials Today: Proceedings 5:13, pages 26974-26980.
Crossref
Crossref
Ling Long, Gaoqiang Chen, Shuai Zhang, Tie Liu & Qingyu Shi. (2017) Finite-element analysis of the tool tilt angle effect on the formation of friction stir welds. Journal of Manufacturing Processes 30, pages 562-569.
Crossref
Crossref
Gaurang R. Joshi & Vishvesh J. Badheka. (2017) Microstructures and Properties of Copper to Stainless Steel Joints by Hybrid FSW. Metallography, Microstructure, and Analysis 6:6, pages 470-480.
Crossref
Crossref
Jian Liu, Biao Cao & Jingwei Yang. (2017) Effects of Vibration Amplitude on Microstructure Evolution and Mechanical Strength of Ultrasonic Spot Welded Cu/Al Joints. Metals 7:11, pages 471.
Crossref
Crossref
Nidhi SHARMA, Zahid A. KHAN & Arshad Noor SIDDIQUEE. (2017) Friction stir welding of aluminum to copper—An overview. Transactions of Nonferrous Metals Society of China 27:10, pages 2113-2136.
Crossref
Crossref
A. Fall, M. Jahazi, A. R. Khdabandeh & M. H. Fesharaki. (2016) Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti–6Al–4V joints. The International Journal of Advanced Manufacturing Technology 91:5-8, pages 2919-2931.
Crossref
Crossref
A. Boucherit, M.-N. Avettand-Fènoël & R. Taillard. (2017) Effect of a Zn interlayer on dissimilar FSSW of Al and Cu. Materials & Design 124, pages 87-99.
Crossref
Crossref
Mohammed M. Hasan, M. Ishak & M.R.M. Rejab. (2016) Influence of machine variables and tool profile on the tensile strength of dissimilar AA7075-AA6061 friction stir welds. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 2605-2615.
Crossref
Crossref
Yufeng Yang, Hongtao Chen & Mingyu Li. (2017) Dissimilar copper-aluminum joint processed by low-temperature nickel electroplating. Journal of Materials Processing Technology 242, pages 68-76.
Crossref
Crossref
Kush P. Mehta & Vishvesh J. Badheka. (2017) Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints. Journal of Materials Processing Technology 239, pages 336-345.
Crossref
Crossref
Kush P. MEHTA & Vishvesh J. BADHEKA. (2017) Influence of tool pin design on properties of dissimilar copper to aluminum friction stir welding. Transactions of Nonferrous Metals Society of China 27:1, pages 36-54.
Crossref
Crossref
Kush Mehta. 2017. Advanced Manufacturing Technologies. Advanced Manufacturing Technologies
101
136
.
Shengke Zou, Shuyuan Ma, Changmeng Liu, Cheng Chen, Limin Ma, Jiping Lu & Jing Guo. (2016) Multi-Track Friction Stir Lap Welding of 2024 Aluminum Alloy: Processing, Microstructure and Mechanical Properties. Metals 7:1, pages 1.
Crossref
Crossref
Majid Elyasi, Hamed Aghajani Derazkola & Morteza Hosseinzadeh. (2016) Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230:7, pages 1234-1241.
Crossref
Crossref
Kush P. Mehta & Vishvesh J. Badheka. (2016) Effects of Tool Pin Design on Formation of Defects in Dissimilar Friction Stir Welding. Procedia Technology 23, pages 513-518.
Crossref
Crossref