Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 31, 2016 - Issue 7
Submit an article Journal homepage
654
Views
55
CrossRef citations to date
0
Altmetric
Original Articles

On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel

A. MohantyDepartment of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, India
,
S. GangopadhyayDepartment of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, IndiaCorrespondence[email protected]
&
A. ThakurDepartment of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, India
Pages 869-879 | Received 08 Jan 2015, Accepted 13 Jun 2015, Published online: 29 Dec 2015

Citations (55)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (11)

Anjali Gupta, Rajesh Kumar, Harmesh Kumar Kansal & Harry Garg. (2024) Effect of nanoparticles mixing-ratio of Al2O3-MWCNT hybrid nano-cutting fluid during MQL turning. Materials and Manufacturing Processes 39:1, pages 43-54.
Read now
Hilmi Pekşen & Ali Kalyon. (2021) Optimization and measurement of flank wear and surface roughness via Taguchi based grey relational analysis. Materials and Manufacturing Processes 36:16, pages 1865-1874.
Read now
Seyed Mohammad Ebrahimi, Mohammadjafar Hadad & Alireza Araee. (2021) Sustainable machining of hardened AISI630 stainless steel using thermally enhanced turning technique. Machining Science and Technology 25:4, pages 608-636.
Read now
S. Lakshmanan, M. Pradeep Kumar, M. Dhananchezian & N. Yuvaraj. (2020) Investigation of monolayer coated WC inserts on turning Ti-alloy. Materials and Manufacturing Processes 35:7, pages 826-835.
Read now
D. Palanisamy, K. Balasubramanian, N. Manikandan, D. Arulkirubakaran & R. Ramesh. (2019) Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts. Materials and Manufacturing Processes 34:5, pages 502-510.
Read now
Anupam Alok & Manas Das. (2018) Cost-effective way of hard turning with newly developed HSN2-coated tool. Materials and Manufacturing Processes 33:9, pages 1003-1010.
Read now
P. Sivaiah & D. Chakradhar. (2018) Multi performance characteristics optimization in cryogenic turning of 17-4 PH stainless steel using Taguchi coupled grey relational analysis. Advances in Materials and Processing Technologies 4:3, pages 431-447.
Read now
K. M. Kumar, P. Hariharan & B. Ramesh. (2018) Study on the influential process parameters in machining the austempered ductile iron. Materials and Manufacturing Processes 33:4, pages 414-421.
Read now
P. Sivaiah & D. Chakradhar. (2017) Machinability studies on 17-4 PH stainless steel under cryogenic cooling environment. Materials and Manufacturing Processes 32:15, pages 1775-1788.
Read now
Mehrshad Mehrpouya, Abed Moheb Shahedin, Sarmad Daood Salman Dawood & Ahmad Kamal Ariffin. (2017) An investigation on the optimum machinability of NiTi based shape memory alloy. Materials and Manufacturing Processes 32:13, pages 1497-1504.
Read now
D. Palanisamy & P. Senthil. (2017) Development of ANFIS model and machinability study on dry turning of cryo-treated PH stainless steel with various inserts. Materials and Manufacturing Processes 32:6, pages 654-669.
Read now

Articles from other publishers (44)

Han Chen, Yongguo Wang, Jianliang Jiao, Zhuopeng Tan, Lirong Huang & Zhiqiang Zhong. (2023) Combined post-treatment approach for improving the surface integrity of CVD α-Al2O3 coating and the tool wear resistance. Ceramics International 49:23, pages 39488-39498.
Crossref
Yueqing Gu, Wenjie Liu, Bowen Wang, Borui Tian, Xinyue Yang & Chongchao Pan. (2023) Analysis and Prediction of Energy, Environmental and Economic Potentials in the Iron and Steel Industry of China. Processes 11:12, pages 3258.
Crossref
Mohammadjafar Hadad & Seyed Mohammad Ebrahimi. (2023) Towards Industry 4.0 and Sustainable Manufacturing Applying Environmentally Friendly Machining of a Precipitation Hardened Stainless Steel Using Hot Turning Process. Applied Sciences 13:22, pages 12405.
Crossref
Qinghua Li, Chunlu Ma, Chunyu Wang, Baizhong Wang & Shihong Zhang. (2023) Analysis of the Cutting Performance of Coated Micro-Textured Bionic Tools for Dry Cutting AISI 52100. Machines 11:9, pages 886.
Crossref
Hakan Yurtkuran, Mehmet Boy & Mustafa Günay. (2023) Investigation of machinability indicators during sustainable milling of 17-4PH stainless steel under dry and MQL environments. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Emine ŞİRİN. (2023) 17-4 PH Paslanmaz Çeliğin MoS2 Nanoakışkan Koşulları Altında Sürtünme/Aşınma Performansının İncelenmesiInvestigation of Friction/Wear Performance of 17-4 PH Stainless Steel under MoS2 Nanofluid Conditions. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11:2, pages 309-320.
Crossref
Xiuxian Chen, Ji Xiong, Zhixing Guo, Junbo Liu, Lu Yang & Qianbing You. (2023) Microstructures and properties of CVD TiN–TiCN–Al2O3 coated WC-8wt%Co-xRu cemented carbide. Journal of Materials Science 58:20, pages 8317-8330.
Crossref
Mahendra Singh, Soni Kumari, Ajay Biswas & Kumar Abhishek. (2023) Influence of advanced coated tools on surface integrity characteristics of Nimonic C263. Materials Today: Proceedings.
Crossref
Athul Sathyanath & Anil Meena. (2022) Microstructure-Induced High-Strain-Rate Deformation Behavior of Heat-Treated 17-4 PH Stainless Steel. Journal of Materials Engineering and Performance 32:1, pages 305-313.
Crossref
Mahendra Singh, Ajay Biswas & Arabinda Meher. (2022) Comparative evaluation of machinability aspects for a sustainable alternative in the machining of Nimonic C-263, a Ni-based superalloy. Materials Today: Proceedings.
Crossref
RIMA SINGHA ROY & KALIPADA MAITY. (2022) INFLUENCE OF WEDM-TEXTURED TOOLS ON THE MACHINABILITY OF TITANIUM GRADE-23 ALLOY. Surface Review and Letters 29:10.
Crossref
Tiyamike Banda, Ali Akhavan Farid, Chuan Li, Veronica Lestari Jauw & Chin Seong Lim. (2022) Application of machine vision for tool condition monitoring and tool performance optimization–a review. The International Journal of Advanced Manufacturing Technology 121:11-12, pages 7057-7086.
Crossref
Ch Sateesh Kumar, Saroj Kumar Patel & Filipe Fernandes. (2022) Performance of Al2O3/TiC mixed ceramic inserts coated with TiAlSiN, WC/C and DLC thin solid films during hard turning of AISI 52100 steel. Journal of Materials Research and Technology 19, pages 3380-3393.
Crossref
Aruna Thakur, Mukesh Tak & Rakesh G. Mote. (2022) Suitability of electrolytes and anodic dissolution behavior of 17-4 PH stainless steel. Materials Today: Proceedings 50, pages 2528-2535.
Crossref
D. Palanisamy, A. Devaraju, K. L. Narasimhamu, N. Manikandan, Ramesh Raju, P. Thejasree & D. Arulkirubakaran. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing 39 50 .
D. Palanisamy, A. Devaraju, K. L. Narasimhamu, P. Thejasree, N. Manikandan & R. Ramesh. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing 565 575 .
B. Sachin, Charitha M. Rao, Gajanan M. Naik, C. Durga Prasad, Ajit M. Hebbale, V. Vijeesh & Muralidhara Rao. 2022. Sustainable Machining Strategies for Better Performance. Sustainable Machining Strategies for Better Performance 61 69 .
Anupam Alok, Amit Kumar & Manas Das. (2021) Hard Turning with a New HSN2-Coated Carbide Insert and Optimization of Process Parameter. Transactions of the Indian Institute of Metals 74:7, pages 1577-1591.
Crossref
Seyed Mohammad Ebrahimi, Mohammadjafar Hadad, Alireza Araee & Seyed Hamid Ebrahimi. (2021) Influence of machining conditions on tool wear and surface characteristics in hot turning of AISI630 steel. The International Journal of Advanced Manufacturing Technology 114:11-12, pages 3515-3535.
Crossref
Jasjeevan Singh, Simranpreet Singh Gill, Manu Dogra & Rupinder Singh. (2021) A review on cutting fluids used in machining processes. Engineering Research Express 3:1, pages 012002.
Crossref
Gobinda Chandra Behera, Jadam Thrinadh & Saurav Datta. (2021) Influence of cutting insert (uncoated and coated carbide) on cutting force, tool-tip temperature, and chip morphology during dry machining of Inconel 825. Materials Today: Proceedings 38, pages 2664-2670.
Crossref
Minglu Wang & Ningsong Qu. (2020) Electrochemical dissolution behavior of S-04 high-strength stainless steel in NaNO3 aqueous solution. Journal of Applied Electrochemistry 50:11, pages 1149-1163.
Crossref
Saqib Anwar, Naveed Ahmed, Salman Pervaiz, Shafiq Ahmad, Ashfaq Mohammad & Mustafa Saleh. (2020) On the turning of electron beam melted gamma-TiAl with coated and uncoated tools: A machinability analysis. Journal of Materials Processing Technology 282, pages 116664.
Crossref
Andrey S. Vasiliev, Sergey S. Volkov, Evgeniy V. Sadyrin & Sergei M. Aizikovich. (2020) Simplified Analytical Solution of the Contact Problem on Indentation of a Coated Half-Space by a Conical Punch. Mathematics 8:6, pages 983.
Crossref
Naresh Deshpande & Hari Vasudevan. (2020) Machining Induced Surface Integrity Aspects of Stainless Steels: A Review. Materials Today: Proceedings 22, pages 1499-1506.
Crossref
Saltuk Alper YAŞAR, Gültekin UZUN & İhsan KORKUT. (2019) 17-4 PH Paslanmaz Çeliklerin Tornalamasında Farklı Kaplama Tiplerinin Kesme Kuvvetlerine Etkilerinin İncelenmesiInvestigation of the Effects of Different Coating Types on Cutting Forces in Turning of 17-4 PH Stainless Steels. Nevşehir Bilim ve Teknoloji Dergisi 8, pages 1-11.
Crossref
Lakshmanan Selvam, Pradeep Kumar Murugesan, Dhananchezian Mani & Yuvaraj Natarajan. (2019) Investigation of AlCrN-Coated Inserts on Cryogenic Turning of Ti-6Al-4V Alloy. Metals 9:12, pages 1338.
Crossref
Potta Sivaiah & Bodicherla Uma. (2019) Multiobjective optimization of sustainable turning process using TOPSIS method. Emerging Materials Research 8:4, pages 686-695.
Crossref
Chetan Darshan, Sumit Jain, Manu Dogra, Munish Kumar Gupta & Mozammel Mia. (2019) Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool. Journal of Thermal Analysis and Calorimetry 138:1, pages 273-285.
Crossref
Emel Kuram. (2019) Al2124 Alüminyum Alaşımının Frezeleme Performansı Üstüne Takım Kaplamasının Etkisi. Deu Muhendislik Fakultesi Fen ve Muhendislik 21:63, pages 749-760.
Crossref
B. Sachin, S. Narendranath & D. Chakradhar. (2019) Selection of optimal process parameters in sustainable diamond burnishing of 17-4 PH stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:5.
Crossref
Potta Sivaiah & D. Chakradhar. (2019) Performance improvement of cryogenic turning process during machining of 17-4 PH stainless steel using multi objective optimization techniques. Measurement 136, pages 326-336.
Crossref
P. Sivaiah & D. Chakradhar. (2019) Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel. Measurement 134, pages 142-152.
Crossref
Anupam Alok & Manas Das. (2019) Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2-coated carbide insert. Measurement 133, pages 288-302.
Crossref
Sachin B, Narendranath S & D. Chakradhar. (2019) Effect of working parameters on the surface integrity in cryogenic diamond burnishing of 17-4 PH stainless steel with a novel diamond burnishing tool. Journal of Manufacturing Processes 38, pages 564-571.
Crossref
P. Sivaiah & D. Chakradhar. (2018) The Effectiveness of a Novel Cryogenic Cooling Approach on Turning Performance Characteristics During Machining of 17-4 PH Stainless Steel Material. Silicon 11:1, pages 25-38.
Crossref
Aruna Thakur, Mukesh Tak & Rakesh G. Mote. (2019) Electrochemical micromachining behavior on 17-4 PH stainless steel using different electrolytes. Procedia Manufacturing 34, pages 355-361.
Crossref
Sivaiah Potta. (2018) Effect of cryogenic coolant on turning performance: a comparative study. SN Applied Sciences 1:1.
Crossref
P. Sivaiah & D. Chakradhar. (2018) Analysis and Modeling of Cryogenic Turning Operation Using Response Surface Methodology. Silicon 10:6, pages 2751-2768.
Crossref
B Sachin, S Narendranath & D Chakradhar. (2018) Experimental evaluation of diamond burnishing for sustainable manufacturing. Materials Research Express 5:10, pages 106514.
Crossref
B Sachin, S Narendranath & D Chakradhar. (2018) Effect of Cryogenic Diamond Burnishing on Residual Stress and Microhardness of 17-4 PH Stainless Steel. Materials Today: Proceedings 5:9, pages 18393-18399.
Crossref
A. Palanisamy & T. Selvaraj. (2018) Optimization of Machining Parameters for Dry Turning of Incoloy 800H Using Taguchi - Based Grey Relational Analysis. Materials Today: Proceedings 5:2, pages 7708-7715.
Crossref
D. Arulkirubakaran, V. Senthilkumar & S. Dinesh. (2016) Effect of textures on machining of Ti-6Al-4V alloy for coated and uncoated tools: A numerical comparison. The International Journal of Advanced Manufacturing Technology 93:1-4, pages 347-360.
Crossref
D. Arulkirubakaran & V. Senthilkumar. (2017) Performance of TiN and TiAlN coated micro-grooved tools during machining of Ti-6Al-4V alloy. International Journal of Refractory Metals and Hard Materials 62, pages 47-57.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.