Citations (103)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Yogesh V. Deshpande, Dinesh R. Zanwar, A. B. Andhare & P. S. Barve. (2023) Application of ANN modelling for optimisation of surface quality and kerf taper angle in abrasive water jet machining of AISI 1018 steel. Advances in Materials and Processing Technologies 9:3, pages 728-741.
Read now
Read now
Ramakrishnan S. (2023) Investigation and optimization of drilled surfaces machined by abrasive water jet machining in Ti-6al-4V alloy. Materials and Manufacturing Processes 38:6, pages 735-746.
Read now
Read now
C. Balasubramaniyan, K. Rajkumar & S. Santosh. (2021) Wire-EDM machinability investigation on quaternary Ni44Ti50Cu4Zr2 shape memory alloy. Materials and Manufacturing Processes 36:10, pages 1161-1170.
Read now
Read now
Umanath K, Devika D & Rashia Begum S. (2021) Experimental Investigation of Role of Particles Size and Cutting Passes in Abrasive Waterjet Machining Process on Titanium Alloy (Ti–6Al–4V) using Taguchi’s Method. Materials and Manufacturing Processes 36:8, pages 936-949.
Read now
Read now
Yuewu Gao, Yugang Zhao, Guixiang Zhang, Guiguan Zhang & Fengshi Yin. (2019) Polishing of paramagnetic materials using atomized magnetic abrasive powder. Materials and Manufacturing Processes 34:6, pages 604-611.
Read now
Read now
Junwei Wang, Jijin Xu, Xiangfei Wang, Xiaoqiang Zhang, Xuefeng Song & Xiaoqi Chen. (2019) A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding. Materials and Manufacturing Processes 34:1, pages 61-69.
Read now
Read now
D. Rajamani, K. Ananthakumar, E. Balasubramanian & J. Paulo Davim. (2018) Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy. Materials and Manufacturing Processes 33:16, pages 1864-1873.
Read now
Read now
Arvind Kumar, Hari Singh & Vinod Kumar. (2018) Study the parametric effect of abrasive water jet machining on surface roughness of Inconel 718 using RSM-BBD techniques. Materials and Manufacturing Processes 33:13, pages 1483-1490.
Read now
Read now
Liping Shi, Yu Fang, Qingwen Dai, Wei Huang & Xiaolei Wang. (2018) Surface texturing on SiC by multiphase jet machining with microdiamond abrasives. Materials and Manufacturing Processes 33:13, pages 1415-1421.
Read now
Read now
A. Gnanavelbabu, Kaliyamoorthy Rajkumar & P. Saravanan. (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Materials and Manufacturing Processes 33:12, pages 1313-1323.
Read now
Read now
S. Kalirasu, N. Rajini, S. Rajesh, Suchart Seingchin & S. N. Ramaswamy. (2018) AWJ machinability performance of CS/UPR composites with the effect of chemical treatment. Materials and Manufacturing Processes 33:4, pages 452-461.
Read now
Read now
K. Balamurugan, M. Uthayakumar, S. Sankar, U. S. Hareesh & K. G. K. Warrier. (2018) Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite. Materials and Manufacturing Processes 33:4, pages 405-413.
Read now
Read now
S. Kalirasu, N. Rajini, S. Rajesh, J.T. Winowlin Jappes & K. Karuppasamy. (2017) AWJM Performance of jute/polyester composite using MOORA and analytical models. Materials and Manufacturing Processes 32:15, pages 1730-1739.
Read now
Read now
K. Bimla Mardi, A. R. Dixit, A. Mallick, Alokesh Pramanik, Beata Ballokova, Pavol Hvizdos, Josef Foldyna, Jiri Scucka, Petr Hlavacek & Michal Zelenak. (2017) Surface integrity of Mg-based nanocomposite produced by Abrasive Water Jet Machining (AWJM). Materials and Manufacturing Processes 32:15, pages 1707-1714.
Read now
Read now
Mustafa Armağan & A. Armağan Arici. (2017) Cutting performance of glass-vinyl ester composite by abrasive water jet. Materials and Manufacturing Processes 32:15, pages 1715-1722.
Read now
Read now
Anish Nair & S. Kumanan. (2017) Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA. Materials and Manufacturing Processes 32:6, pages 693-699.
Read now
Read now
R. Selvam, L. Karunamoorthy & N. Arunkumar. (2017) Investigation on performance of abrasive water jet in machining hybrid composites. Materials and Manufacturing Processes 32:6, pages 700-706.
Read now
Read now
N. Yuvaraj & M. Pradeep Kumar. (2017) Surface integrity studies on abrasive water jet cutting of AISI D2 steel. Materials and Manufacturing Processes 32:2, pages 162-170.
Read now
Read now
Articles from other publishers (85)
A. Tamilarasan, A. Renugambal & K. Shunmugesh. (2023) Multi-performance optimization for AWJ drilling process in cutting of ceramic tile: BBD with EOBL-GOA algorithm. Multidiscipline Modeling in Materials and Structures 19:6, pages 1199-1225.
Crossref
Crossref
S R Stalin, M Adam Khan, J T Winowlin Jappes & NC Brintha. (2023) Experimental assessment and Adam gene algorithm to optimize the process parameter for micro profile cutting on CM247 alloy using pulsed laser machining process. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Shuo Sun, Yi’nan Qian, Wenjun Lu, Shijing Wu, Yong Kang, Aili Tan & Deng Li. (2023) Improving the cutting quality of aluminum alloy machined by abrasive waterjet with a relatively low pressure. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:7.
Crossref
Crossref
M. Manoj, G. R. Jinu & J. Suresh Kumar. (2023) Process Optimization of Abrasive Water Jet Machining of Aluminum Hybrid Composite Using Taguchi DEAR Methodology. International Journal of Metalcasting.
Crossref
Crossref
Mohsen Soori & Behrooz Arezoo. (2023) Minimization of surface roughness and residual stress in abrasive water jet cutting of titanium alloy Ti6Al4V. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311579.
Crossref
Crossref
V. BALAJI, N. YUVARAJ, N. LENIN & A. MANJUNATH. (2023) EFFECT OF STAND-OFF DISTANCE ON ABRASIVE WATER JET PIERCING OF CERAMIC-COATED SUPERALLOY. Surface Review and Letters 30:02.
Crossref
Crossref
A. Perumal, C. Kailasanathan, Vincent Herald Wilson, T. Sampath Kumar, B. Stalin & P.R. Rajkumar. (2023) Machinability of Titanium alloy 6242 by AWJM through Taguchi method. Materials Today: Proceedings 81, pages 606-611.
Crossref
Crossref
Arvind Kumar, Pawan Kumar & Rajneesh Kumar. (2023) A study of kerf quality of Inconel 718 using abrasive water jet cutting. Materials Today: Proceedings 81, pages 261-266.
Crossref
Crossref
Raju Kumar Thakur & Kalyan Kumar Singh. (2023) Evaluation of hole quality to explore the influence of graphene nanoplatelets embedded in epoxy/carbon composite during abrasive water jet drilling. Journal of Manufacturing Processes 85, pages 569-583.
Crossref
Crossref
Tian Ji, Shengli Huang, Boming Ren, Jiuzhen Ye & Gaowei Wang. (2022) Analysis of grinding fluid flow in high-temperature alloy surface profile grinding. The International Journal of Advanced Manufacturing Technology 124:3-4, pages 759-771.
Crossref
Crossref
P. Sarmaji Kumar, M. Rajesh, K. Ramraji & R. Vijayakumar. 2023. Recent Advances in Materials Technologies. Recent Advances in Materials Technologies
491
504
.
Jennifer Milaor Llanto, Ana Vafadar & Majid Tolouei-Rad. 2022. Production Engineering and Robust Control. Production Engineering and Robust Control.
Subhadip Pradhan & Debabrata Dhupal. (2021) An Integrated Approach of Simulation, Modeling and Computer-aided Design of Hot Abrasive Jet Machining Setup. Journal of Advanced Manufacturing Systems 21:03, pages 427-472.
Crossref
Crossref
S. Santosh, J. Kevin Thomas, M. Pavithran, G. Nithyanandh & J. Ashwath. (2022) An experimental analysis on the influence of CO2 laser machining parameters on a copper-based shape memory alloy. Optics & Laser Technology 153, pages 108210.
Crossref
Crossref
Agnal Francis, K. G. Thirugnanasambantham, R. Ramesh, M. Venkata Roshan & M. Pavana Uddhava Kumar. (2022) High-temperature erosion and its mechanisms of IN-738 superalloy under hot air jet conditions. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Quberk Jeeva Singh & G Rajamurugan. (2022) Experimental study on abrasive water jet machining of WCFC reinforced flax/wire mesh/hemp composite. Journal of Industrial Textiles 52, pages 152808372211219.
Crossref
Crossref
J. Manivannan, S. Rajesh, K. Mayandi, S. Syath Abuthakeer, M. Ravichandran, T. Senthil Muthu Kumar, M. R. Sanjay & Suchart Siengchin. (2022) A novel and prediction approach of sheep wool reinforced polyester composites: Surface qualities and hybrid modeling. Polymer Composites 43:8, pages 5274-5290.
Crossref
Crossref
Yuru Wu, Chao Wang, Jun Luo & Yun Huang. (2022) Experimental and numerical characterization of abrasive belt wear and debris formation during dry grinding of nickel-based superalloys with diamond abrasive belts. Simulation Modelling Practice and Theory 118, pages 102546.
Crossref
Crossref
Soundarapandian Rammohan, Sundaresan Thirumalai Kumaran, Marimuthu Uthayakumar, Kinga Korniejenko, Marek Nykiel & Arumugam Velayutham. (2022) Prediction of Abrasive Waterjet Machining Parameters of Military-Grade Armor Steel by Semi-Empirical and Regression Models. Materials 15:12, pages 4368.
Crossref
Crossref
M. Balasubramanian & S. Madhu. (2021) Performance evaluation of newly designed nozzle on abrasive jet machining characteristics of laminated composites. World Journal of Engineering 19:4, pages 546-558.
Crossref
Crossref
Andrzej Perec, Aleksandra Radomska-Zalas, Anna Fajdek-Bieda & Elzbieta Kawecka. (2022) Efficiency of Tool Steel Cutting by Water Jet with Recycled Abrasive Materials. Materials 15:11, pages 3978.
Crossref
Crossref
D Rajamani, E Balasubramanian, G Dilli Babu & K Ananthakumar. (2020) Experimental investigations on high precision abrasive waterjet cutting of natural fibre reinforced nano clay filled green composites. Journal of Industrial Textiles 51:3_suppl, pages 3786S-3810S.
Crossref
Crossref
Tian Ji, Shengli Huang, Baoming Ren, Siping Hu & Taixin Guan. (2022) Study on the characteristics of high temperature alloy surface profile grinding process. Materials Research Express 9:6, pages 066506.
Crossref
Crossref
Sabarinathan Palaniyappan, Annamalai Veiravan, Rajkumar Kaliyamoorthy & Vishal Kumar. (2022) Sustainable solution to low-cost alternative abrasive from electric ceramic insulator waste for use in abrasive water jet machining. The International Journal of Advanced Manufacturing Technology 120:7-8, pages 5243-5257.
Crossref
Crossref
K. G. Thirugnanasambantham, Agnal Francis, R. Ramesh, Aravind M & Medagam Kesava Reddy. (2022) Investigation of erosion mechanisms on IN-718 based turbine blades under water jet conditions. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
UMANATH KARUPPUSAMY, DEVIKA DAKSHINAMURTHY & RASHIA BEGUM SYED IBRAHIM. (2022) INVESTIGATION OF MACHINABILITY AND GEOMETRY CHARACTERISTICS OF ABRASIVE WATERJET CIRCULAR CUTTING PROCESS ON Ti–6Al–4V ALLOY. Surface Review and Letters 29:04.
Crossref
Crossref
M. Rajesh, R. Vijayakumar, K. Rajkumar & K. Ramraji. (2022) Experimental investigation and striation study of Inconel 718 by using abrasive water jet drilling. Materials Today: Proceedings 62, pages 1277-1281.
Crossref
Crossref
M. Adam Khan, JT Winowlin Jappes, P.S. Samuel Ratna Kumar & P.M. Mashinini. (2022) EDM process parameter optimization using response surface methodology for Ni-Ti shape memory alloy. Materials Today: Proceedings 52, pages 1466-1471.
Crossref
Crossref
M. Ayyanar Raja, V. Manikandan, S. Suresh Kumar, P. Amuthakkannan, I. Balasubramanian, S. Joe Patrick Gnanaraj & Subramania Bala Jeshurun. (2022) Parametric investigation and optimization of AWJM process on stir cast al7075/basalt composite materials using Taguchi based grey relational analysis. Materials Today: Proceedings 60, pages 815-821.
Crossref
Crossref
Pradeep Jayappa, Santhosh Srinivasan, K. Vetrivel Murugan, C. Thangavel, M. Bala Theja, G. Phanindra Raja Varma, S. Marichamy & Ram Subbiah. (2022) An overview on role of unconventional machining processes on different materials. Materials Today: Proceedings 50, pages 1341-1345.
Crossref
Crossref
Anish Nair, S. Kumanan & K.P. Shanavas. (2022) Heuristic optimization techniques in abrasive water jet hole making – A case study. Materials Today: Proceedings 50, pages 1291-1299.
Crossref
Crossref
K.M. John, S. Thirumalai Kumaran, Rendi Kurniawan & Farooq Ahmed. (2022) Evaluation of thrust force and delamination in drilling of CFRP by using active spring restoring backup force. Materials Today: Proceedings 49, pages 269-274.
Crossref
Crossref
S. Madhavarao, Ravi Varma Penmetsa, Ch. Rama Bhadri Raju & Hema T. Raju Gottumukkala. 2022. Proceedings of Fourth International Conference on Inventive Material Science Applications. Proceedings of Fourth International Conference on Inventive Material Science Applications
167
177
.
A. SHANMUGAM, T. MOHANRAJ, K. KRISHNAMURTHY & ALI KAYA GUR. (2021) MULTI-RESPONSE OPTIMIZATION ON ABRASIVE WATERJET MACHINING OF GLASS FIBER REINFORCED PLASTICS USING TAGUCHI METHOD COUPLED WITH TOPSIS. Surface Review and Letters 28:12.
Crossref
Crossref
S. Rammohan, S. Thirumalai Kumaran, M. Uthayakumar & A. Velayudham. (2021) Application of TOPSIS Optimization in Abrasive Water Jet Machining of Military Grade Armor Steel. Human Factors and Mechanical Engineering for Defense and Safety 5:1.
Crossref
Crossref
J. BHARANI CHANDAR, L. NAGARAJAN & M. SIVA KUMAR. (2021) RECENT RESEARCH PROGRESS IN DEEP HOLE DRILLING PROCESS: A REVIEW. Surface Review and Letters 28:11.
Crossref
Crossref
Mahalingam Siva Kumar, Devaraj Rajamani, Emad Abouel Nasr, Esakki Balasubramanian, Hussein Mohamed & Antonello Astarita. (2021) A Hybrid Approach of ANFIS—Artificial Bee Colony Algorithm for Intelligent Modeling and Optimization of Plasma Arc Cutting on Monel™ 400 Alloy. Materials 14:21, pages 6373.
Crossref
Crossref
Subhadip Pradhan, Sudhansu Ranjan Das & Debabrata Dhupal. (2020) Performance Evaluation of Recently Developed New Process HAJM during Machining Hardstone Quartz Using Hot Silicon Carbide Abrasives: an Experimental Investigation and Sustainability Assessment. Silicon 13:9, pages 2895-2919.
Crossref
Crossref
Jennifer Milaor Llanto, Ana Vafadar, Muhammad Aamir & Majid Tolouei-Rad. (2021) Analysis and Optimization of Process Parameters in Abrasive Waterjet Contour Cutting of AISI 304L. Metals 11:9, pages 1362.
Crossref
Crossref
V. Mohankumar, M. Kanthababu & A. Velayudham. (2021) Abrasive waterjet cutting of boron carbide particles reinforced Al 6063 MMCs – A semi empirical modeling approach in the prediction of kerf angle. Measurement 181, pages 109492.
Crossref
Crossref
M Adam Khan, Hargovind Soni, PM Mashinini & M Uthayakumar. (2021) Abrasive water jet cutting process form machining metals and composites for engineering applications: A review. Engineering Research Express 3:2, pages 022004.
Crossref
Crossref
Yigit Ozcan, Lutfi Taner Tunc, Jan Kopacka, Beril Cetin & Matej Sulitka. (2021) Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces. The International Journal of Advanced Manufacturing Technology 114:11-12, pages 3581-3596.
Crossref
Crossref
Jennifer Milaor Llanto, Majid Tolouei-Rad, Ana Vafadar & Muhammad Aamir. (2021) Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L. Applied Sciences 11:11, pages 4925.
Crossref
Crossref
Jennifer Milaor Llanto, Majid Tolouei-Rad, Ana Vafadar & Muhammad Aamir. (2021) Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review. Applied Sciences 11:8, pages 3344.
Crossref
Crossref
Jonas Holmberg, Anders Wretland, Peter Hammersberg, Johan Berglund, Alfredo Suárez & Tomas Beno. (2021) Surface integrity investigations for prediction of fatigue properties after machining of alloy 718. International Journal of Fatigue 144, pages 106059.
Crossref
Crossref
SUBHADIP PRADHAN, SUDHANSU RANJAN DAS, BASANTA KUMAR NANDA, PANKAJ CHARAN JENA & DEBABRATA DHUPAL. (2020) MACHINING OF HARDSTONE QUARTZ WITH MODIFIED AJM PROCESS USING HOT SiC ABRASIVES: ANALYSIS, MODELING, OPTIMIZATION, AND COST ANALYSIS. Surface Review and Letters 28:02, pages 2050049.
Crossref
Crossref
Suppawat Chuvaree & Kannachai Kanlayasiri. (2021) Effects of Side Flushing and Multi-Aperture Inner Flushing on Characteristics of Electrical Discharge Machining Macro Deep Holes. Metals 11:1, pages 148.
Crossref
Crossref
Anish Nair & Somasundaram Kumanan. (2021) Evaluation and Optimization of Geometric Deviations in Abrasive Water Jet Profile Cutting of Inconel 617. Journal of Testing and Evaluation 49:1, pages 20200036.
Crossref
Crossref
B. Parsharamulu, G. Surya Prakash Rao, Sudhakar Uppalapati & S.P. Jani. (2021) An experimental investigation of wirecut electric discharge machine processed titanium material. Materials Today: Proceedings 46, pages 8184-8188.
Crossref
Crossref
K. Karthik, David Smith Sundarsingh, M. Harivignesh, R. Gopi Karthick & M. Praveen. (2021) Optimization of machining parameters in abrasive water jet cutting of stainless steel 304. Materials Today: Proceedings 46, pages 1384-1389.
Crossref
Crossref
M. Adam Khan, J.T. Winowlin Jappes, P.S. Samuel Ratna Kumar & Peter Madindwa Mashinini. (2021) Machining parameter optimization using Adam gene algorithm for electro spark erosion on shape memory alloy. Materials Today: Proceedings 46, pages 7487-7491.
Crossref
Crossref
S. Chandravadhana, R. Ohmsakthi Vel, D. Shameer, S. Kannappan, R. Nandhakumar & R. Kalyanasundaram. (2021) Surface roughness prediction on drilled holes on strenx steel using AWJM process. Materials Today: Proceedings 45, pages 2419-2421.
Crossref
Crossref
A. Tamilarasan, S. Arumugam, D. Rajamani, P. Changareddy, E. Balasubramanian & P. Pranay. 2021. Advances in Materials and Manufacturing Engineering. Advances in Materials and Manufacturing Engineering
381
388
.
Subhadip Pradhan, Sudhansu Ranjan Das, Basanta Kumar Nanda, Pankaj Charan Jena & Debabrata Dhupal. (2020) Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:11.
Crossref
Crossref
P. Venkateshwar Reddy, G. Suresh Kumar & V. Satish Kumar. (2020) Multi-response Optimization in Machining Inconel-625 by Abrasive Water Jet Machining Process Using WASPAS and MOORA. Arabian Journal for Science and Engineering 45:11, pages 9843-9857.
Crossref
Crossref
Ján Kmec, Miroslav Gombár, Marta Harničárová, Jan Valíček, Milena Kušnerová, Jiří Kříž, Milan Kadnár, Monika Karková & Alena Vagaská. (2020) The Predictive Model of Surface Texture Generated by Abrasive Water Jet for Austenitic Steels. Applied Sciences 10:9, pages 3159.
Crossref
Crossref
A. SHANMUGAM, K. KRISHNAMURTHY & T. MOHANRAJ. (2019) EXPERIMENTAL STUDY OF SURFACE ROUGHNESS AND TAPER ANGLE IN ABRASIVE WATER JET MACHINING OF 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY. Surface Review and Letters 27:03, pages 1950112.
Crossref
Crossref
M. Adam Khan & Kapil Gupta. (2019) On Heat Treatment and Surface Characterization of Spark Eroded Nickel-Based Superalloy Developed by Additive Manufacturing. Transactions of the Indian Institute of Metals 73:2, pages 429-439.
Crossref
Crossref
Yong Zhang, Qi Wang, Ning Hou & Shijie Rao. (2020) Material removal mechanism of superalloy Inconel 718 based on electrochemical abrasive jet processing. The International Journal of Advanced Manufacturing Technology 106:11-12, pages 4663-4673.
Crossref
Crossref
M Adam Khan & Kapil Gupta. (2020) Machinability Studies on Abrasive Water Jet Machining of Low Alloy Steel for Different Thickness. IOP Conference Series: Materials Science and Engineering 709:4, pages 044099.
Crossref
Crossref
S. Vijay Ananth, A. Ramesh Udayakumar, Ajith Arul Daniel & N. Poornachandiran. Optimization of machining parameters of Kevlar fibre reinforced composites. Optimization of machining parameters of Kevlar fibre reinforced composites.
T. Vishnu Vardhan, B. Stalin, S. Marichamy, M. Ravichandran, J. Vairamuthu & V. Dhinakaran. Material synthesis, characterization and machining performance of terbium metal matrix composite. Material synthesis, characterization and machining performance of terbium metal matrix composite.
R. Srinivasan, Vivin Jacob, A. Muniappan, S. Madhu & M. Sreenevasulu. (2020) Modeling of surface roughness in abrasive water jet machining of AZ91 magnesium alloy using Fuzzy logic and Regression analysis. Materials Today: Proceedings 22, pages 1059-1064.
Crossref
Crossref
Ketan Verma, V. Anandakrishnan & S. Sathish. (2020) Modelling and analysis of abrasive water jet machining of AA2014 alloy with Al2O3 abrasive using fuzzy logic. Materials Today: Proceedings 21, pages 652-657.
Crossref
Crossref
Yuvaraj Natarajan, Pradeep Kumar Murugesan, Mugilvalavan Mohan & Shakeel Ahmed Liyakath Ali Khan. (2020) Abrasive Water Jet Machining process: A state of art of review. Journal of Manufacturing Processes 49, pages 271-322.
Crossref
Crossref
Ruitao Peng, Kaifa Liu, Jiawei Tong & Xinzi Tang. (2019) Performance of the internal-cooling grooved grinding wheel with patterned abrasives. The International Journal of Advanced Manufacturing Technology 106:5-6, pages 1633-1644.
Crossref
Crossref
Sachin Singh, Vishal Gupta & M. R. Sankar. 2020. Advances in Abrasive Based Machining and Finishing Processes. Advances in Abrasive Based Machining and Finishing Processes
71
96
.
Jagadish & Kapil Gupta Jagadish & Kapil Gupta. 2020. Abrasive Water Jet Machining of Engineering Materials. Abrasive Water Jet Machining of Engineering Materials
1
11
.
A. Suárez, F. Veiga, R. Polvorosa, T. Artaza, J. Holmberg, L.N. López de Lacalle & A. Wretland. (2019) Surface integrity and fatigue of non-conventional machined Alloy 718. Journal of Manufacturing Processes 48, pages 44-50.
Crossref
Crossref
G. Veerappan & M. Ravichandran. (2019) Experimental investigations on abrasive water jet machining of nickel-based superalloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:11.
Crossref
Crossref
Dharmendra B.V.Shyam Prasad Kodali & Nageswara Rao Boggarapu. (2019) Multi-objective optimization for optimum abrasive water jet machining process parameters of Inconel718 adopting the Taguchi approach. Multidiscipline Modeling in Materials and Structures 16:2, pages 306-321.
Crossref
Crossref
Kashif Ishfaq, Naveed Ahmad, Nadeem Ahmad Mufti, Muhammad Qaiser Saleem & Abdulrahman M. Al-Ahmari. (2019) Abrasive Waterjet Cutting of Clad Composite for Achieving Minimal Cut Quality Difference Between Constituent Layers. Metals 9:7, pages 754.
Crossref
Crossref
K. Ananthakumar, D. Rajamani, E. Balasubramanian & J. Paulo Davim. (2019) Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS. Measurement 135, pages 725-737.
Crossref
Crossref
Jonas Holmberg, Johan Berglund, Anders Wretland & Tomas Beno. (2018) Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1575-1591.
Crossref
Crossref
B. S. Nishanth, Vinayak N. Kulkarni & V. N. Gaitonde. A review on conventional and non-conventional machining of titanium and nickel based alloys. A review on conventional and non-conventional machining of titanium and nickel based alloys.
D. Deepak & J. Paulo Davim. (2019) Multi-Response Optimization of Process Parameters in AWJ Machining of Hybrid GFRP Composite by Grey Relational Method. Procedia Manufacturing 35, pages 1211-1221.
Crossref
Crossref
Munuswamy Naresh Babu & Nambi Muthukrishnan. (2017) Exploration on Kerf-angle and Surface Roughness in Abrasive Waterjet Machining using Response Surface Method. Journal of The Institution of Engineers (India): Series C 99:6, pages 645-656.
Crossref
Crossref
R Rethan Raj & H Kanagasabapathy. (2018)
Influence of abrasive water jet machining parameter on performance characteristics of AA7075-ZrSiO
4
-hBN hybrid metal matrix composites
. Materials Research Express 5:10, pages 106509.
Crossref
Crossref
Andrzej Perec. (2018) Experimental research into alternative abrasive material for the abrasive water-jet cutting of titanium. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 1529-1540.
Crossref
Crossref
M Adam Khan, A K Gokul, M.P Bharani Dharan, R.V.S Jeevakarthikeyan, M Uthayakumar, S Thirumalai Kumaran & M Duraiselvam. (2018) Machinability of nickel based alloys using electrical discharge machining process. IOP Conference Series: Materials Science and Engineering 346, pages 012044.
Crossref
Crossref
Anish Nair & Somasundaram Kumanan. (2018) Optimization of size and form characteristics using multi-objective grey analysis in abrasive water jet drilling of Inconel 617. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:3.
Crossref
Crossref
S Vigneshwaran, M Uthayakumar & V Arumugaprabu. (2017) Abrasive water jet machining of fiber-reinforced composite materials. Journal of Reinforced Plastics and Composites 37:4, pages 230-237.
Crossref
Crossref
Kumari Bimla Mardi, Amit Rai Dixit, Ashish Kumar Srivastava, Ashish Mallick, Jiri Scucka, Petr Hlaváček, Sergej Hloch & Michal Zeleňák. 2018. Applications of Fluid Dynamics. Applications of Fluid Dynamics
605
612
.
S. Thirumalai Kumaran, Tae Jo Ko, M. Uthayakumar & Md. Mofizul Islam. (2017) Prediction of surface roughness in abrasive water jet machining of CFRP composites using regression analysis. Journal of Alloys and Compounds 724, pages 1037-1045.
Crossref
Crossref
S. Thirumalai Kumaran, Tae Jo Ko, Rendi Kurniawan, Changping Li & M. Uthayakumar. (2017) ANFIS modeling of surface roughness in abrasive waterjet machining of carbon fiber reinforced plastics. Journal of Mechanical Science and Technology 31:8, pages 3949-3954.
Crossref
Crossref