Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Pallab Sarmah & Promod Kumar Patowari. (2023) Machinability study of Al 6063-based MMCs with SiC reinforcement particles using WEDM process. Materials and Manufacturing Processes 38:7, pages 783-796.
Read now
Read now
N. Manikandan, K. Balasubramanian, D. Palanisamy, P.M. Gopal, D. Arulkirubakaran & J.S. Binoj. (2019) Machinability Analysis and ANFIS modelling on Advanced Machining of Hybrid Metal Matrix Composites for Aerospace Applications. Materials and Manufacturing Processes 34:16, pages 1866-1881.
Read now
Read now
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh Shafaroud. (2019) Theoretical and experimental analysis of machining errors on small arced corners during WEDM finishing stages. Machining Science and Technology 23:5, pages 734-757.
Read now
Read now
S. Karthik, K. Soorya Prakash, P.M. Gopal & Sathiskumar Jothi. (2019) Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo0.5 MMC. Materials and Manufacturing Processes 34:7, pages 759-768.
Read now
Read now
A. Pramanik, A. K. Basak, A. R. Dixit & S. Chattopadhyaya. (2018) Processing of duplex stainless steel by WEDM. Materials and Manufacturing Processes 33:14, pages 1559-1567.
Read now
Read now
Abhijit Dey & Krishna Murari Pandey. (2018) Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites. Materials and Manufacturing Processes 33:12, pages 1346-1353.
Read now
Read now
P. M. Gopal, K. Soorya Prakash & S. Jayaraj. (2018) WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters. Materials and Manufacturing Processes 33:1, pages 77-84.
Read now
Read now
L. Selvarajan, K Venkataramanan, K.P. Srinivasa Perumal, Mohammed Yunus, Rami Alfattani & A. Aravindhan. A review of spark erosion machining efficiency, characterization and optimization techniques for ceramic composites. Composite Interfaces 0:0, pages 1-52.
Read now
Read now
Articles from other publishers (24)
Aliasker Kizhakke Thalakkal, Gopal Pudhupalayam Muthukutti, Suresh Vellingiri, S. Naveen & S. Madhu. (2023) Utilization of Silicon Enriched Natural Halloysite Nano Tube: Mechanical, Tribological, and Corrosion Behaviour in Magnesium Matrix Composites. Silicon 15:11, pages 4823-4834.
Crossref
Crossref
S. Senthil Kumar, T.S. Senthilkumar, P. Pitchipoo, Yagya Dutta Dwivedi, N. Nagaprasad, Kuldeep K Saxena, S. Rathinavel, Sayed M Eldin & Krishnaraj Ramaswamy. (2023) Grey relational analysis and surface texture analysis of Al-based metal matrix composites. Journal of Materials Research and Technology 24, pages 5372-5388.
Crossref
Crossref
S. Senthil Kumar, R. Sudhakara PandianP. Pitchipoo, T. S. Senthilkumar & S. G. Ponnambalam. (2023) Investigation of Wear and Wire Electrical Discharge Machining Characteristics of Al-Mg-MoS2 Composites Using Response Surface Method. Journal of Testing and Evaluation 51:2, pages 20220327.
Crossref
Crossref
A. Jayaganthan, M. Manickam, S. Prathiban, M. Amarnath, Karthikeyan Subramanian, M. Babu, P. Dharmadurai & Yesgat Adamassu. (2022) Multiobjective Optimization of WEDM Parameters on the Mg-HNT-Zr Hybrid Metal Matrix Composite Using Taguchi-Coupled GRA. Advances in Materials Science and Engineering 2022, pages 1-11.
Crossref
Crossref
Sanjeev Kumar Garg, Alakesh Manna & Ajai Jain. (2021) Investigation and Analysis of Surface Veracity and Parametric Aspects During $${\textit{Wire}}_{{\textit{EDM}}}$$ of $$\textit{Al}/\textit{ZrO}_{2(p)}$$-Metal Matrix Composite. Arabian Journal for Science and Engineering 47:7, pages 8417-8438.
Crossref
Crossref
Harsh Nair, A Pramanik, AK Basak, C Prakash, S Debnath, S Shankar & Amit Rai Dixit. (2022) Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892210960.
Crossref
Crossref
N. Rajesh Jesudoss Hynes, D. S. Samuvel Prem Kumar, M. Vivek Prabhu, Muhammad Asad Ali, Muhammad Huzaifa Raza & Catalin I. Pruncu. (2022) Investigating the parametric effects on wire electric discharge machining performance in processing AA1050-5 wt.% SiC composite with zinc-coated brass wire. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:4.
Crossref
Crossref
Senthil Kumar S, Sudhakara Pandian R, Pitchipoo P, P Narayanasamy & T S Senthilkumar. (2022)
Surface and subsurface investigation of Al-Mg-MoS
2
composite on performing wire electrical discharge machining
. Surface Topography: Metrology and Properties 10:1, pages 015047.
Crossref
Crossref
Sanjeev Kr. Garg, Alakesh Manna & Ajai Jain. 2022. Advanced Composites in Aerospace Engineering Applications. Advanced Composites in Aerospace Engineering Applications
195
223
.
A. Pramanik, A. K. Basak, C. Prakash, S. Shankar, Shubham Sharma & S. Narendranath. (2021) Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. Journal of Materials Engineering and Performance 30:12, pages 8926-8935.
Crossref
Crossref
Deepak Doreswamy, Anupkumar M. Bongale, Marcin Piekarski, Arunkumar Bongale, Satish Kumar, Danil Yurievich Pimenov, Khaled Giasin & Krzysztof Nadolny. (2021) Optimization and Modeling of Material Removal Rate in Wire-EDM of Silicon Particle Reinforced Al6061 Composite. Materials 14:21, pages 6420.
Crossref
Crossref
J. Kesavan, C. Velmurugan, V. Senthilkumar & S. Dinesh. (2021) Optimization of WEDM parameters on surface integrity characteristics of NiTi shape memory alloy. Materials Today: Proceedings 43, pages 183-190.
Crossref
Crossref
Sanjeev Kumar Garg, Alakesh Manna & Ajai Jain. 2021. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering
687
697
.
A. Pramanik, A.K. Basak, G. Littlefair, S. Debnath, C. Prakash, Meinam Annebushan Singh, Deepak Marla & Ramesh Kumar Singh. (2020) Methods and variables in Electrical discharge machining of titanium alloy – A review. Heliyon 6:12, pages e05554.
Crossref
Crossref
A. Gnanavelbabu & K. Rajkumar. (2020) Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach. Arabian Journal for Science and Engineering 45:7, pages 5859-5872.
Crossref
Crossref
N. Muralidharan, K. Chockalingam, R. Parameshwaran, K. Kalaiselvan & N. Nithyavathy. (2020) Optimization of CNC-WEDM Parameters for AA2024/ZrB2 in situ Stir Cast Composites Using Response Surface Methodology with Desirability Function Technique. Arabian Journal for Science and Engineering 45:7, pages 5563-5579.
Crossref
Crossref
Amresh Kumar, Neelkant Grover, Alakesh Manna, Jasgurpreet Singh Chohan, Raman Kumar, Sunpreet Singh, Chander Prakash & Catalin Iulian Pruncu. (2020) Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites. Advanced Composites Letters 29, pages 2633366X2096313.
Crossref
Crossref
K. Paswan, A. Pramanik, S. Chattopadhyaya & A. K. Basak. (2019) A novel approach towards sustainable electrical discharge machining of metal matrix composites (MMCs). The International Journal of Advanced Manufacturing Technology 106:3-4, pages 1477-1486.
Crossref
Crossref
A. Pramanik, A.K. Basak & C. Prakash. (2019) Understanding the wire electrical discharge machining of Ti6Al4V alloy. Heliyon 5:4, pages e01473.
Crossref
Crossref
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh. (2019) Prediction Algorithm for WEDM Arced Path Errors Based on Spark Variable Gap and Nonuniform Spark Distribution Models. Journal of Manufacturing Science and Engineering 141:1.
Crossref
Crossref
Ali Alshemary, A Pramanik, A.K. Basak & Guy Littlefair. (2018) Accuracy of duplex stainless steel feature generated by electrical discharge machining (EDM). Measurement 130, pages 137-144.
Crossref
Crossref
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh. (2018) Analyzing wire deflection errors of WEDM process on small arced corners. Journal of Manufacturing Processes 36, pages 216-223.
Crossref
Crossref
Kashif Ishfaq, Nadeem Ahmad Mufti, Naveed Ahmed, Mohammad Pervez Mughal & Muhammad Qaiser Saleem. (2018) An investigation of surface roughness and parametric optimization during wire electric discharge machining of cladded material. The International Journal of Advanced Manufacturing Technology 97:9-12, pages 4065-4079.
Crossref
Crossref
A. Pramanik & A.K. Basak. (2016) Degradation of wire electrode during electrical discharge machining of metal matrix composites. Wear 346-347, pages 124-131.
Crossref
Crossref