Citations (137)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (23)
Biswesh Ranjan Acharya, Abhijeet Sethi, Amit Kumar Das, Partha Saha & Dilip Kumar Pratihar. (2023) Multi-objective optimization in electrochemical micro-drilling of Ti6Al4V using nature-inspired techniques. Materials and Manufacturing Processes 38:15, pages 1942-1954.
Read now
Read now
Burri Srinivasa Reddy, Pradeep Kumar Murugasen & Vinothkumar Sivalingam. (2023) Machinability Studies on Commercially Pure Titanium (Grade-2) Under Cryogenic Condition. Materials and Manufacturing Processes 38:12, pages 1463-1471.
Read now
Read now
Deepak Kaushik & Inderdeep Singh. (2023) Analysis of drilling behavior of flax/PP composites. Materials and Manufacturing Processes 0:0, pages 1-13.
Read now
Read now
Arun Kumar E & Devendiran S. (2023) Investigation, optimising the MQL-Turning parameters of Nimonic 75 using weighted Mayfly algorithm. Advances in Materials and Processing Technologies 0:0, pages 1-18.
Read now
Read now
M. Naresh Babu, M. Vetrivel Sezhian, V. Anandan & M. Dinesh Babu. (2022) Effect of ionic liquid as lubricants in turning H 13 tool steel- an experimental study. Materials and Manufacturing Processes 37:16, pages 1812-1822.
Read now
Read now
V.S.S Venkatesh & Ashish B Deoghare. (2022) Modelling and Optimisation of Wear Parameters for Spark Plasma Sintered Al– SiC–Kaoline Hybrid Composite. Advances in Materials and Processing Technologies 8:sup3, pages 1286-1304.
Read now
Read now
T Pragatheswaran, S. Rajakumar & V. Balasubramanian. (2022) Optimization of the weld characteristics of plasma-arc welded titanium alloy joints: an experimental study. Materials and Manufacturing Processes 37:8, pages 896-907.
Read now
Read now
Prianka B. Zaman, Md Imran Hasan Tusar & Nikhil Ranjan Dhar. (2022) Selection of appropriate process inputs for turning Ti-6Al-4V alloy under hybrid Al2O3-MWCNT nano-fluid based MQL. Advances in Materials and Processing Technologies 8:1, pages 380-400.
Read now
Read now
Roshan Lal Virdi, Sukhpal Singh Chatha & Hazoor Singh. (2022) Processing Characteristics of Different Vegetable Oil-based Nanofluid MQL for Grinding of Ni-Cr Alloy. Advances in Materials and Processing Technologies 8:1, pages 210-223.
Read now
Read now
Gurpreet Singh, Vivek Aggarwal & Sehijpal Singh. (2021) Experimental investigations into machining performance of Hastelloy C-276 in different cooling environments. Materials and Manufacturing Processes 36:15, pages 1789-1799.
Read now
Read now
S. Selvakumar, V. S. Sreebalaji & K Ravikumar. (2021) Machinability Analysis and Optimization in Micro turning on tool wear for Titanium Alloy. Materials and Manufacturing Processes 36:7, pages 792-802.
Read now
Read now
Sabarish V. Narayanan, Mark Benjamin D.Hariharan M. V.Raja Keshav & D. Samuel Raj. (2021) A combined numerical and experimental investigation of minimum quantity lubrication applied to end milling of Ti6Al4V alloy. Machining Science and Technology 25:2, pages 209-236.
Read now
Read now
Koyel Datta Gupta, Rinky Dwivedi & Deepak Kumar Sharma. (2021) Prediction of Covid-19 trends in Europe using generalized regression neural network optimized by flower pollination algorithm. Journal of Interdisciplinary Mathematics 24:1, pages 33-51.
Read now
Read now
Arash Zaretalab, Seyedhamidreza Shahabi Haghighi, Saeed Mansour & Mohsen S. Sajadieh. (2020) An integrated stochastic model to optimize the machining condition and tool maintenance policy in the multi-pass and multi-stage machining. International Journal of Computer Integrated Manufacturing 33:3, pages 211-228.
Read now
Read now
Siva kumar, M. Adam Khan & B. Muralidharan. (2019) Processing of titanium-based human implant material using wire EDM. Materials and Manufacturing Processes 34:6, pages 695-700.
Read now
Read now
Arash Zaretalab, Hamidreza Shahabi Haghighi, Saeed Mansour & Mohsen S. Sajadieh. (2019) Optimisation of tool replacement time in the machining process based on tool condition monitoring using the stochastic approach. International Journal of Computer Integrated Manufacturing 32:2, pages 159-173.
Read now
Read now
Rajeshkumar Madarkar, Sahaj Agarwal, Pirsab Attar, S. Ghosh & P. V. Rao. (2018) Application of ultrasonic vibration assisted MQL in grinding of Ti–6Al–4V. Materials and Manufacturing Processes 33:13, pages 1445-1452.
Read now
Read now
Ankush Choudhary, Manoj Kumar & Deepak Rajendra Unune. (2018) Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW. Materials and Manufacturing Processes 33:7, pages 759-769.
Read now
Read now
K. M. Kumar, P. Hariharan & B. Ramesh. (2018) Study on the influential process parameters in machining the austempered ductile iron. Materials and Manufacturing Processes 33:4, pages 414-421.
Read now
Read now
P. Sivaiah & D. Chakradhar. (2017) Machinability studies on 17-4 PH stainless steel under cryogenic cooling environment. Materials and Manufacturing Processes 32:15, pages 1775-1788.
Read now
Read now
Kanak Kalita, Ishwer Shivakoti & Ranjan Kumar Ghadai. (2017) Optimizing process parameters for laser beam micro-marking using genetic algorithm and particle swarm optimization. Materials and Manufacturing Processes 32:10, pages 1101-1108.
Read now
Read now
Umesh Khandey, Sudarsan Ghosh & Krishnaswamy Hariharan. (2017) Machining parameters optimization for satisfying the multiple objectives in machining of MMCs. Materials and Manufacturing Processes 32:10, pages 1082-1093.
Read now
Read now
Hira Zaheer & Millie Pant. (2017) Solution to industrial optimization problems through differential evolution variants. Materials and Manufacturing Processes 32:10, pages 1131-1143.
Read now
Read now
Articles from other publishers (114)
Aswani S. Kumar, B. Geetha Priyadarshini, Bibeye Jahaziel & V. Krishnaraj. (2023) On the formation of Ti2AlN MAX phase coatings and improvement in tool life by superimposing on tungsten carbide cutting tool for machining Ti-6Al-4V alloys. Journal of Manufacturing Processes 107, pages 210-225.
Crossref
Crossref
Jitendra Kumar & Sushant Negi. (2023) Dry sliding wear behavior of additively manufactured cenosphere-filled PETG syntactic foam composites. Aircraft Engineering and Aerospace Technology 95:10, pages 1570-1577.
Crossref
Crossref
Ramandeep Singh, Harsh Pandey & Varun Sharma. (2023) Multi-Objective Optimization for Sustainable Machining of Hastelloy C-276 Using Evolutionary Algorithms. Journal of Materials Engineering and Performance.
Crossref
Crossref
Imran Ahmad & Debolina Basu. (2023)
Taguchi L
16
(4
4
) orthogonal array-based study and thermodynamics analysis for electro-Fenton process treatment of textile industrial dye
. Chemical Product and Process Modeling 18:5, pages 741-760.
Crossref
Crossref
Omkar Mypati, Avishek Mukherjee, Debasish Mishra, Surjya Kanta Pal, Partha Pratim Chakrabarti & Arpan Pal. (2023) A critical review on applications of artificial intelligence in manufacturing. Artificial Intelligence Review 56:S1, pages 661-768.
Crossref
Crossref
Muhammad Ayyaz Khan, Syed Husain Imran Jaffery, Muhammad Ali Khan, Muhammad Iftikhar Faraz & Sachhal Mufti. (2023) Multi-Objective Optimization of Micro-Milling Titanium Alloy Ti-3Al-2.5V (Grade 9) Using Taguchi-Grey Relation Integrated Approach. Metals 13:8, pages 1373.
Crossref
Crossref
Nitin Kundlik Kamble, R. S. Sankarasubramanian, P. S. Satheesh Kumar, Balachandra Pattanaik, Ram Subbiah, Suresh Seetharaman & P. Satishkumar. (2023) Parametric analysis of MQL-based sustainable machining using nano alumina mixed coconut oil-based cutting fluid: a computing approach. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Nikhil Aditya & Siba Sankar Mahapatra. (2023) Switching from exploration to exploitation in gravitational search algorithm based on diversity with Chaos. Information Sciences 635, pages 298-327.
Crossref
Crossref
Muhammad Ali Khan, Syed Husain Imran Jaffery, Mushtaq Khan & Mansoor Alruqi. (2023) Investigation into the machinability of Ti-6Al-4V under cryogenic condition. Journal of Materials Research and Technology.
Crossref
Crossref
Saheli Rao, Sivanesh Murugan, Gopal Achari, Basil Perdicakis & Anil K. Mehrotra. (2023)
An optimization study for preventing silica gelation and improving filtration effectiveness during
pH
reduction of high concentration silica solutions
. The Canadian Journal of Chemical Engineering 101:6, pages 3044-3058.
Crossref
Crossref
Khaled N. Alqahtani, Mustafa M. Nasr, Saqib Anwar, Ali M. Al-Samhan, Mohammed H. Alhaag & Husam Kaid. (2023) Integrated Intelligent Method Based on Fuzzy Logic for Optimizing Laser Microfabrication Processing of GnPs-Improved Alumina Nanocomposites. Micromachines 14:4, pages 750.
Crossref
Crossref
Ahmad Edelbi, Ramanuj Kumar, Ashok Kumar Sahoo & Anish Pandey. (2022) Comparative Machining Performance Investigation of Dual-Nozzle MQL-Assisted ZnO and Al2O3 Nanofluids in Face Milling of Ti–3Al–2.5V Alloys. Arabian Journal for Science and Engineering 48:3, pages 2969-2993.
Crossref
Crossref
ATUL BABBAR, VIVEK JAIN, DHEERAJ GUPTA & CHANDER PRAKASH. (2021) EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION OF NEUROSURGICAL BONE GRINDING UNDER BIO-MIMIC ENVIRONMENT. Surface Review and Letters 30:01.
Crossref
Crossref
Rahul R. Chakule, Sharad S. Chaudhari, Kailas V. Chandratre, Pralhad B. Patole & Poonam S. Talmale. (2023) Nanofluids, micro-lubrications and machining process optimisations − a review. Manufacturing Review 10, pages 1.
Crossref
Crossref
Ayesha Kausar. 2023. Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications. Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications
317
342
.
M. R. Hasmizuan Rais, Mohammad Yeakub Ali, S. Ramesh, Seri Rahayu Ya’akub & Zunaidi Ibrahim. 2023. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering
351
357
.
Dilip Kumar Bagal, Siddharth Jeet, Abhishek Barua, Swastik Pradhan, Arati Rath & Saujanya Kumar Sahu. 2023. Advances in Functional and Smart Materials. Advances in Functional and Smart Materials
515
538
.
S. Ramakrishnan, D. Lenin Singaravelu & V. Senthilkumar. 2023. Recent Advances in Materials Technologies. Recent Advances in Materials Technologies
591
606
.
Imhade P. Okokpujie & Lagouge K. TartibuImhade P. Okokpujie & Lagouge K. Tartibu. 2023. Modern Optimization Techniques for Advanced Machining. Modern Optimization Techniques for Advanced Machining
137
167
.
Imhade P. Okokpujie & Lagouge K. TartibuImhade P. Okokpujie & Lagouge K. Tartibu. 2023. Modern Optimization Techniques for Advanced Machining. Modern Optimization Techniques for Advanced Machining
61
90
.
Sadashiv Bellubbi, Bijan Mallick, Azzam Sabah Hameed, Pijush Dutta, Manoj Kumar Sarkar & Sathisha Nanjundaswamy. (2022) Neural Network (NN)-Based RSM-PSO Multiresponse Parametric Optimization of the Electro Chemical Discharge Micromachining Process During Microchannel Cutting on Silica Glass. Journal of Advanced Manufacturing Systems 21:04, pages 869-897.
Crossref
Crossref
Arif Reza, Lide Chen & Kevin Kruger. (2022) Microwave irradiated ammonia nitrogen removal from anaerobically digested liquid dairy manure: A response surface methodology and artificial neural network-based optimization and modeling. Journal of Environmental Chemical Engineering 10:5, pages 108279.
Crossref
Crossref
Wen Zhang & Jun Xu. (2022) Advanced lightweight materials for Automobiles: A review. Materials & Design 221, pages 110994.
Crossref
Crossref
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh, Balkar Singh, Shubham Sharma, Jujhar Singh, Changhe Li, R.A. Ilyas & Abdullah Mohamed. (2022) Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants. Materials 15:15, pages 5451.
Crossref
Crossref
Elhadji Cheikh Talibouya Ba, Paulo Sérgio Martins & Marcello Rosa Dumont. (2022) Statistical study of surface texture and chip formation during turning of AISI 1020 steel: Emphasis on parameters Rsk, Rku, and Rk family and on the chip thickness ratio. The International Journal of Advanced Manufacturing Technology 121:11-12, pages 8257-8283.
Crossref
Crossref
Vikrant Guleria, Vivek Kumar & Pradeep K. Singh. (2022) A novel approach for prediction of surface roughness in turning of EN353 steel by RVR-PSO using selected features of VMD along with cutting parameters. Journal of Mechanical Science and Technology 36:6, pages 2775-2785.
Crossref
Crossref
K. Gajalakshmi, N. Senthilkumar & K. Palanikumar. (2022) Experimental analysis and optimization on machining of coated carbon fiber and nanoclay reinforced aluminum hybrid composites. Carbon Letters 32:3, pages 815-833.
Crossref
Crossref
V. Sivaraman, S. J. Davis Hans, Kumaran Palani, Tsegaye Alemayehu Atiso, Jafferson JM & Nimel Sworna Ross. (2022) Analysis of Turning Performance on AISI O1 Steel Using VO+nMoS2 as Coolant. Advances in Materials Science and Engineering 2022, pages 1-12.
Crossref
Crossref
S. Thirumalvalavan, N. Senthilkumar, G. Perumal & M. R. Anantha Padmanaban. (2022) Ameliorating the Wear Defiance of HVOF Thermal Spray Silicon Carbide Coated Ti-6Al-4V Alloy Using PCA-GRA Technique. Silicon 14:6, pages 3101-3117.
Crossref
Crossref
D. Pramanik, N. Roy, A.S Kuar, S. Sarkar & S. Mitra. (2022) Experimental investigation of sawing approach of low power fiber laser cutting of titanium alloy using particle swarm optimization technique. Optics & Laser Technology 147, pages 107613.
Crossref
Crossref
Lejla Banjanović-Mehmedović & Fahrudin Mehmedović. 2022. Research Anthology on Cross-Disciplinary Designs and Applications of Automation. Research Anthology on Cross-Disciplinary Designs and Applications of Automation
406
428
.
Shailesh Kumar Singh, Somnath Chattopadhyaya, Alokesh Pramanik, Sanjeev Kumar, Shailesh M. Pandey, R.S. Walia, Shubham Sharma, Aqib Mashood Khan, Shashi Prakash Dwivedi, Sunpreet Singh & Szymon Wojciechowski. (2022) Effect of alumina oxide nano-powder on the wear behaviour of CrN coating against cylinder liner using response surface methodology: processing and characterizations. Journal of Materials Research and Technology 16, pages 1102-1113.
Crossref
Crossref
Van-Hung Pham, Thi-Thu-Ha Nguyen, Van-Huy Nguyen, Trung-Kien Quach, Trong-Nghia Nghiem & Tuan-Anh Bui. 2022. The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering. The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering
1268
1278
.
Saurabh Mishra, Vineet Dubey & Anuj Kumar Sharma. 2022. Recent Trends in Industrial and Production Engineering. Recent Trends in Industrial and Production Engineering
23
34
.
Nripen Mondal, Sudip Mandal, Madhab Chandra Mandal, Santanu Das & Barun Haldar. 2022. Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering. Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering
180
195
.
Binayak Sen, Syed Abou Iltaf Hussain, Munish Kumar Gupta, Mozammel Mia & Uttam Kumar Mandal. (2021) Swarm intelligence based selection of optimal end-milling parameters under minimum quantity nano-green lubricating environment. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:23, pages 6969-6983.
Crossref
Crossref
Mulugundam Siva Surya, G. Prasanthi, A. Kiran Kumar, V. K. Sridhar & S. K. Gugulothu. (2021) Optimization of cutting parameters while turning Ti-6Al-4 V using response surface methodology and machine learning technique. International Journal on Interactive Design and Manufacturing (IJIDeM) 15:4, pages 453-462.
Crossref
Crossref
Chaoren Yan, Yan Chen, Haojun Yang, Ning Qian, Yijia Chen & Nan Guo. (2021) Machining performance of PCD drill in low-frequency vibration-assisted drilling of CFRP/Ti6Al4V stack: with special emphasis on the plowing behavior. The International Journal of Advanced Manufacturing Technology 116:7-8, pages 2269-2283.
Crossref
Crossref
Parvesh Antil, Sarbjit Singh, Alakesh Manna, Nitish Katal & Catalin Pruncu. (2021)
An improvement in drilling of
SiCp
/glass fiber‐reinforced polymer matrix composites using response surface methodology and
multi‐objective
particle swarm optimization
. Polymer Composites 42:10, pages 5051-5064.
Crossref
Crossref
Mehdi Hourmand, Ahmed A. D. Sarhan, Mohd Sayuti & Mohd Hamdi. (2021) A Comprehensive Review on Machining of Titanium Alloys. Arabian Journal for Science and Engineering 46:8, pages 7087-7123.
Crossref
Crossref
Sunil Kumar, Saikat Ranjan Maity & Lokeswar Patnaik. (2021) Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study. Ceramics International 47:11, pages 16018-16028.
Crossref
Crossref
Munish K. Gupta, Mozammel Mia, Nancy Gupta, Sunpreet Singh, Ankush Choudhary, Muhammad Jamil, Aqib M. Khan, Krzysztof Nadolny, Wojciech Kapłonek, Danil Y. Pimenov & Catalin I. Pruncu. 2021. Modeling and Optimization in Manufacturing. Modeling and Optimization in Manufacturing
193
215
.
Yuhang Yang & Chenhui Shao. (2021) Hybrid multi-task learning-based response surface modeling in manufacturing. Journal of Manufacturing Systems 59, pages 607-616.
Crossref
Crossref
Jay K. Raval & Bruce L. Tai. (2021) An optical tomographic method to characterize the mist distribution in MQL Tools. Journal of Manufacturing Processes 62, pages 275-282.
Crossref
Crossref
Gurminder Singh, Jean-Michel Missiaen, Didier Bouvard & Jean-Marc Chaix. (2021) Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization. Additive Manufacturing 38, pages 101778.
Crossref
Crossref
Apoorva Shastri, Aniket Nargundkar, Anand J. Kulkarni & Luigi Benedicenti. (2021) Optimization of process parameters for turning of titanium alloy (Grade II) in MQL environment using multi-CI algorithm. SN Applied Sciences 3:2.
Crossref
Crossref
Anis Farhan Kamaruzaman, Azlan Mohd Zain, Noordin Mohd Yusof, Farhad Nadjarian & Rozita Abdul Jalil. Optimization of roundness error in deep hole drilling using moth-flame optimization. Optimization of roundness error in deep hole drilling using moth-flame optimization.
Pralhad B. Patole, Vivek V. Kulkarni & Sudhir G. Bhatwadekar. (2021) MQL Machining with nano fluid: a review. Manufacturing Review 8, pages 13.
Crossref
Crossref
Muhammad Yasir, Mohd Danish, Mozammel Mia, Munish Kumar Gupta & Murat Sarikaya. (2020) Investigation into the surface quality and stress corrosion cracking resistance of AISI 316L stainless steel via precision end-milling operation. The International Journal of Advanced Manufacturing Technology 112:3-4, pages 1065-1076.
Crossref
Crossref
Rupinder Singh, J. S. Dureja & Manu Dogra. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
605
619
.
Mustafa M. Nasr, Saqib Anwar, Ali M. Al-Samhan, Mageed Ghaleb & Abdulmajeed Dabwan. (2020) Milling of Graphene Reinforced Ti6Al4V Nanocomposites: An Artificial Intelligence Based Industry 4.0 Approach. Materials 13:24, pages 5707.
Crossref
Crossref
Prianka B. Zaman & N. R. Dhar. (2020) Multi-objective Optimization of Double-Jet MQL System Parameters Meant for Enhancing the Turning Performance of Ti–6Al–4V Alloy. Arabian Journal for Science and Engineering 45:11, pages 9505-9526.
Crossref
Crossref
Amarjit Singh & Manoj Kumar Sinha. (2020) Multi-Response Optimization During Dry Turning of Bio-implant Steel (AISI 316L) Using Coated Carbide Inserts. Arabian Journal for Science and Engineering 45:11, pages 9397-9411.
Crossref
Crossref
Ajit Kumar & Pulak M. Pandey. (2020) Development of Mg based biomaterial with improved mechanical and degradation properties using powder metallurgy. Journal of Magnesium and Alloys 8:3, pages 883-898.
Crossref
Crossref
Atul Babbar, Chander Prakash, Sunpreet Singh, Munish Kumar Gupta, Mozammel Mia & Catalin Iulian Pruncu. (2020) Application of hybrid nature-inspired algorithm: Single and bi-objective constrained optimization of magnetic abrasive finishing process parameters. Journal of Materials Research and Technology 9:4, pages 7961-7974.
Crossref
Crossref
Mohammad Arafat, Teddy Sjafrizal & Rino Andias Anugraha. (2020) An artificial neural network approach to predict energy consumption and surface roughness of a natural material. SN Applied Sciences 2:7.
Crossref
Crossref
Jagtar Singh, Gurminder Singh & Pulak M Pandey. (2020) Electric discharge machining using rapid manufactured complex shape copper electrode: Parametric analysis and process optimization for material removal rate, electrode wear rate and cavity dimensions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:12, pages 2459-2473.
Crossref
Crossref
Harpinder Singh, Vishal S. Sharma & Manu Dogra. (2020) Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of TI-6AL-4V-ELI. Tribology International 144, pages 106113.
Crossref
Crossref
V. Anandan, M. Naresh Babu, N. Muthukrishnan & M. Dinesh Babu. (2020) Performance of silver nanofluids with minimum quantity lubrication in turning on titanium: a phase to green manufacturing. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:4.
Crossref
Crossref
K. Venkatesan, S. Devendiran, D. Sachin & J. Swaraj. (2020) Investigation of machinability characteristics and comparative analysis under different machining conditions for sustainable manufacturing. Measurement 154, pages 107425.
Crossref
Crossref
Nripen Mondal, Sudip Mandal & Madhab Chandra Mandal. (2020) FPA based optimization of drilling burr using regression analysis and ANN model. Measurement 152, pages 107327.
Crossref
Crossref
Qin Guo, Mulan Wang, Youfeng Xu & Yulin Wang. (2020) Minimization of surface roughness and tangential cutting force in whirlwind milling of a large screw. Measurement 152, pages 107256.
Crossref
Crossref
Lejla Banjanović-Mehmedović & Fahrudin Mehmedović. 2020. Handbook of Research on Integrating Industry 4.0 in Business and Manufacturing. Handbook of Research on Integrating Industry 4.0 in Business and Manufacturing
31
52
.
Gurminder Singh & Pulak M Pandey. (2019) Experimental investigations into mechanical and thermal properties of rapid manufactured copper parts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:1, pages 82-95.
Crossref
Crossref
Jagtar Singh & Pulak M Pandey. (2019) Process optimization for rapid manufacturing of complex geometry electrical discharge machining electrode. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234:1, pages 66-81.
Crossref
Crossref
Samuel Ranti Oke, Gabriel Seun Ogunwande, Moshood Onifade, Emmanuel Aikulola, Esther Dolapo Adewale, Olumide Emmanuel Olawale, Babapelumi Ebun Ayodele, Fredrick Mwema, Japheth Obiko & Michael Oluwatosin Bodunrin. (2020) An overview of conventional and non-conventional techniques for machining of titanium alloys. Manufacturing Review 7, pages 34.
Crossref
Crossref
Hongfei Tao, Ran Chen, Jianping Xuan, Qi Xia, Zhongyuan Yang, Xin Zhang, Shuai He & Tielin Shi. (2020) Prioritization analysis and compensation of geometric errors for ultra-precision lathe based on the random forest methodology. Precision Engineering 61, pages 23-40.
Crossref
Crossref
Darshit Shah & Sanket Bhavsar. (2020) Effect of Tool Nose Radius and Machining Parameters on Cutting Force, Cutting Temperature and Surface Roughness – An Experimental Study of Ti-6Al-4V (ELI). Materials Today: Proceedings 22, pages 1977-1986.
Crossref
Crossref
C. Chandrasekhara Sastry, K. Gokulakrishnan, P. Hariharan, M. Pradeep Kumar & S. Rajendra Boopathy. (2019) Investigation of boring on gunmetal in dry, wet and cryogenic conditions. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:1.
Crossref
Crossref
Eugene Feldshtein & Stanislaw Legutko. 2020. Sustainable Production: Novel Trends in Energy, Environment and Material Systems. Sustainable Production: Novel Trends in Energy, Environment and Material Systems
151
159
.
Potta Sivaiah & Bodicherla Uma. (2019) Multiobjective optimization of sustainable turning process using TOPSIS method. Emerging Materials Research 8:4, pages 686-695.
Crossref
Crossref
Sanjeev Katoch, Rakesh Sehgal, Vishal Singh, Munish Kumar Gupta, Mozammel Mia & Catalin Iulian Pruncu. (2019) Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms. Tribology International 140, pages 105895.
Crossref
Crossref
A. Nandakumar, T. Rajmohan & S. Vijayabhaskar. (2019) Experimental Evaluation of the Lubrication Performance in MQL Grinding of Nano SiC Reinforced Al Matrix Composites. Silicon 11:6, pages 2987-2999.
Crossref
Crossref
Naveed Ahmed, Salman Pervaiz, Shafiq Ahmad, Madiha Rafaqat, Adeel Hassan & Mazen Zaindin. (2019) LBM of aluminum alloy: towards a control of material removal and roughness. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 1901-1915.
Crossref
Crossref
Tatjana V. Sibalija. (2019) Particle swarm optimisation in designing parameters of manufacturing processes: A review (2008–2018). Applied Soft Computing 84, pages 105743.
Crossref
Crossref
Khanna, Airao, Gupta, Song, Liu, Mia, Maruda & Krolczyk. (2019) Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method. Materials 12:20, pages 3418.
Crossref
Crossref
Venkatesan Kannan & Devendiran Sundararajan.
Parameter Optimization during Minimum Quantity Lubrication Turning of Inconel 625 Alloy with CUO, Al
2
O
3
and CNT Nanoparticles Dispersed Vegetable-Oil-Based Cutting Fluid
.
Parameter Optimization during Minimum Quantity Lubrication Turning of Inconel 625 Alloy with CUO, Al
2
O
3
and CNT Nanoparticles Dispersed Vegetable-Oil-Based Cutting Fluid
.
Chetan Darshan, Sumit Jain, Manu Dogra, Munish Kumar Gupta & Mozammel Mia. (2019) Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool. Journal of Thermal Analysis and Calorimetry 138:1, pages 273-285.
Crossref
Crossref
Maraboina Raju, Munish Kumar Gupta, Neeraj Bhanot & Vishal S. Sharma. (2018) A hybrid PSO–BFO evolutionary algorithm for optimization of fused deposition modelling process parameters. Journal of Intelligent Manufacturing 30:7, pages 2743-2758.
Crossref
Crossref
Prianka B. Zaman & Nikhil Ranjan Dhar. (2019) Design and evaluation of an embedded double jet nozzle for MQL delivery intending machinability improvement in turning operation. Journal of Manufacturing Processes 44, pages 179-196.
Crossref
Crossref
P. Sivaiah. (2019) Experimental investigation and modelling of MQL assisted turning process during machining of 15-5 PH stainless steel using response surface methodology. SN Applied Sciences 1:8.
Crossref
Crossref
Gurminder Singh & Pulak M. Pandey. (2019) Rapid manufacturing of copper components using 3D printing and ultrasonic assisted pressureless sintering: Experimental investigations and process optimization. Journal of Manufacturing Processes 43, pages 253-269.
Crossref
Crossref
Gurraj Singh, Catalin Iulian Pruncu, Munish Kumar Gupta, Mozammel Mia, Aqib Mashood Khan, Muhammad Jamil, Danil Yurievich Pimenov, Binayak Sen & Vishal S. Sharma. (2019) Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms. Materials 12:6, pages 999.
Crossref
Crossref
Mozammel Mia, Grzegorz Królczyk, Radosław Maruda & Szymon Wojciechowski. (2019) Intelligent Optimization of Hard-Turning Parameters Using Evolutionary Algorithms for Smart Manufacturing. Materials 12:6, pages 879.
Crossref
Crossref
Harpinder Singh, Vishal S. Sharma, Sarabjit Singh & Manu Dogra. (2019) Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI. Journal of Manufacturing Processes 39, pages 241-249.
Crossref
Crossref
Surender Kumar & Pardeep Kumar Sood. (2019) Leverage of machining parameters and non-oxide nano ceramic fillers loading on machinability of aluminium matrix based nano-composites. Materials Research Express 6:5, pages 056516.
Crossref
Crossref
Surender Kumar & Pardeep Kumar Sood. (2019)
A comparative study of dry sliding wear characterization of nano SiC and nano B
4
C filled Al7075 nanocomposites under high temperature environment
. Materials Research Express 6:5, pages 056506.
Crossref
Crossref
P. Sivaiah & D. Chakradhar. (2019) Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel. Measurement 134, pages 142-152.
Crossref
Crossref
Mozammel Mia, Munish Kumar Gupta, Jose Adolfo Lozano, Diego Carou, Danil Yu. Pimenov, Grzegorz Królczyk, Aqib Mashood Khan & Nikhil Ranjan Dhar. (2019) Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V. Journal of Cleaner Production 210, pages 121-133.
Crossref
Crossref
Gourhari Ghosh, Prosun Mandal & Subhas Chandra Mondal. (2017) Modeling and optimization of surface roughness in keyway milling using ANN, genetic algorithm, and particle swarm optimization. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1223-1242.
Crossref
Crossref
Subbarayan Sivasankaran. (2019) Optimization on dry sliding wear behavior of yellow brass using face centered composite design. AIMS Materials Science 6:1, pages 80-96.
Crossref
Crossref
Berend Denkena, Marc-André Dittrich, Siebo Claas Stamm & Vannila Prasanthan. (2019) Knowledge-based process planning for economical re-scheduling in production control. Procedia CIRP 81, pages 980-985.
Crossref
Crossref
S.S. Chaudhari, R.R. Chakule & P.S. Talmale. (2019) Experimental Study of Heat Transfer Characteristics of Al2O3 and CuO Nanofluids for Machining Application. Materials Today: Proceedings 18, pages 788-797.
Crossref
Crossref
Neelesh Kumar Sahu & Atul B. Andhare. (2019) Multiobjective optimization for improving machinability of Ti-6Al-4V using RSM and advanced algorithms. Journal of Computational Design and Engineering 6:1, pages 1-12.
Crossref
Crossref
C.H. Lauro, J.C. Nogueira, D. Carou, L.C. Brandão & J. Paulo Davim. 2019. Mechanical Behaviour of Biomaterials. Mechanical Behaviour of Biomaterials
117
128
.
S. Mondal, G. Paul & S. C. Mondal. 2019. Research into Design for a Connected World. Research into Design for a Connected World
977
987
.
Mir Molaie, Ali Zahedi & Javad Akbari. (2018) Effect of Water-Based Nanolubricants in Ultrasonic Vibration Assisted Grinding. Journal of Manufacturing and Materials Processing 2:4, pages 80.
Crossref
Crossref
P.K.C. Kanigalpula, Sanjib Jaypuria, Dilip K. Pratihar & Maha N. Jha. (2018) Experimental investigations, input-output modeling, and optimization of spiking phenomenon in electron beam welding of ETP copper plates. Measurement 129, pages 302-318.
Crossref
Crossref
Mozammel Mia, Asaduzzaman Rifat, Md. Farhan Tanvir, Munish Kumar Gupta, Md. Jubayer Hossain & Anjan Goswami. (2018) Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning. Measurement 129, pages 156-166.
Crossref
Crossref
P. Sivaiah & D. Chakradhar. (2018) Analysis and Modeling of Cryogenic Turning Operation Using Response Surface Methodology. Silicon 10:6, pages 2751-2768.
Crossref
Crossref
Munish Gupta, Catalin Pruncu, Mozammel Mia, Gurraj Singh, Sunpreet Singh, Chander Prakash, P. Sood & Harjot Gill. (2018) Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions. Materials 11:11, pages 2088.
Crossref
Crossref
W.S. Yip & S. To. (2018) Sustainable manufacturing of ultra-precision machining of titanium alloys using a magnetic field and its sustainability assessment. Sustainable Materials and Technologies 16, pages 38-46.
Crossref
Crossref
Mozammel Mia, GurRaj Singh, Munish Kumar Gupta & Vishal S. Sharma. (2018) Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6. Precision Engineering 53, pages 289-299.
Crossref
Crossref
Mozammel Mia, Munish Kumar Gupta, Gurraj Singh, Grzegorz Królczyk & Danil Yu Pimenov. (2018) An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions. Journal of Cleaner Production 187, pages 1069-1081.
Crossref
Crossref
P. Sivaiah & D. Chakradhar. (2018) Effect of cryogenic coolant on turning performance characteristics during machining of 17-4 PH stainless steel: A comparison with MQL, wet, dry machining. CIRP Journal of Manufacturing Science and Technology 21, pages 86-96.
Crossref
Crossref
Arash Zaretalab, Hamidreza Shahabi Haghighi, Saeed Mansour & Mohsen S. Sajadieh. (2018) A mathematical model for the joint optimization of machining conditions and tool replacement policy with stochastic tool life in the milling process. The International Journal of Advanced Manufacturing Technology 96:5-8, pages 2319-2339.
Crossref
Crossref
D. Mark Benjamin, V. Narayanan Sabarish, M.V. Hariharan & D. Samuel Raj. (2018) On the benefits of sub-zero air supplemented minimum quantity lubrication systems: An experimental and mechanistic investigation on end milling of Ti-6-Al-4-V alloy. Tribology International 119, pages 464-473.
Crossref
Crossref
K. Ganesan, M. Naresh Babu, M. Santhanakumar & N. Muthukrishnan. (2018) Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:3.
Crossref
Crossref
P. SIVAIAH, P. MALLIKARJUNA, B. UMA & CHALAPATHI K. VENKATA. (2018) OPTIMIZATION OF ENVIRONMENTAL FRIENDLY TURNING PROCESS
USING TAGUCHI INTEGRATED GREY RELATIONAL ANALYSIS
DURING MACHINING OF 17-4 PH STAINLESS STEEL. i-manager's Journal on Mechanical Engineering 8:4, pages 8.
Crossref
Crossref
Rahul R. Chakule, Sharad S. Chaudhari & P. S. Talmale. (2017) Evaluation of the effects of machining parameters on MQL based surface grinding process using response surface methodology. Journal of Mechanical Science and Technology 31:8, pages 3907-3916.
Crossref
Crossref
Munish K. Gupta & P. K. Sood. (2017) Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach. Friction 5:2, pages 155-170.
Crossref
Crossref
Munish Kumar Gupta & PK Sood. (2016) Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231:8, pages 1445-1464.
Crossref
Crossref
N. Rayhana, M. Fathullah, Z. Shayfull, S. M. Nasir, M. H. M. Hazwan, M. Sazli & Z. R. Yahya. Optimisation on processing parameters for minimising warpage on side arm using response surface methodology (RSM) and particle swarm optimisation (PSO). Optimisation on processing parameters for minimising warpage on side arm using response surface methodology (RSM) and particle swarm optimisation (PSO).
Munish K. Gupta, P. K. Sood, Gurraj Singh & Vishal S. Sharma. 2017. Advanced Manufacturing Technologies. Advanced Manufacturing Technologies
237
248
.