Citations (23)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (7)
Mayank Agarwal & Rajeev Srivastava. (2022) Microstructural study for powder-chip reinforcement of similar matrix metal of AA6061 on semisolid cast by Solid-liquid mixed process. Advances in Materials and Processing Technologies 8:2, pages 1598-1609.
Read now
Read now
Mayank Agarwal & Rajeev Srivastava. (2022) Correlation between tensile strength and microstructural properties of LM6 semi-solid cast alloy ball-milled with Si-rich/Al powder. Philosophical Magazine Letters 102:1, pages 26-34.
Read now
Read now
Songnan Wang & Shiai Xu. (2021) Ti/Cr(III) conversion coating on aluminium foil for lithium-ion battery package. Surface Engineering 37:3, pages 365-372.
Read now
Read now
Sunil Dutta & Suresh Kumar Reddy Narala. (2020) Experimental investigation to study the effects of processing parameters on developed novel AM(Al-Mn) series alloy. Materials and Manufacturing Processes 35:16, pages 1842-1851.
Read now
Read now
Mayank Agarwal & Rajeev Srivastava. (2019) Influence of Fine Al2O3 and Aluminium Nano-Particles on the 6061 Aluminium Alloy near the Grain Boundary of the Semi-Solid Cast Microstructure. Transactions of the Indian Ceramic Society 78:2, pages 94-100.
Read now
Read now
Mayank Agarwal & Rajeev Srivastava. (2019) Influence of processing parameters on microstructure and mechanical response of a high-pressure die cast aluminum alloy. Materials and Manufacturing Processes 34:4, pages 462-472.
Read now
Read now
Maaz Akhtar, Sayyad Zahid Qamar, Muzamil Muhammad & Ali Nadeem. (2018) Optimum heat treatment of aluminum alloy used in manufacturing of automotive piston components. Materials and Manufacturing Processes 33:16, pages 1874-1880.
Read now
Read now
Articles from other publishers (16)
Eugênio José Zoqui. 2023. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Arumugampillai Megalingam, Asnul Hadi Bin Ahmad, Mohd Rashidi Bin Maarof & Kumarasamy Sudhakar. (2021) Viscosity measurements in semi-solid metal processing: current status and recent developments. The International Journal of Advanced Manufacturing Technology 119:3-4, pages 1435-1459.
Crossref
Crossref
Deepak Agarwal, Manish Dixit, Nitesh kumar Dixit & Mayank Agarwal. (2022) Dry sliding wear performance of Semi-Solid Al/LM6 cast Composite: Effect of silicon particles on worn surfaces. Materials Today: Proceedings 56, pages 2227-2231.
Crossref
Crossref
Nitin Srivastava & Mohd Anas. 2022. Advancement in Materials, Manufacturing and Energy Engineering, Vol. I. Advancement in Materials, Manufacturing and Energy Engineering, Vol. I
319
330
.
Mayank Agarwal, Devendra Pratap Singh, Manvandra Kumar Singh & Rajeev Srivastava. 2022. Recent Trends in Design, Materials and Manufacturing. Recent Trends in Design, Materials and Manufacturing
191
197
.
Yi Guo, Yongfei Wang & Shengdun Zhao. (2021) Numerical Simulation and Experimental Analysis of the Semi-Solid Thixotropic Extrusion Forming Process for Producing the Thin-Wall Wrought Aluminum Alloy Mobile Phone Shells. Materials 14:13, pages 3505.
Crossref
Crossref
Devendra Pratap Singh, Vijay Kumar Dwivedi & Mayank Agarwal. (2021) The key attributes of processing parameters on semi-solid metal casting: An Overview. E3S Web of Conferences 309, pages 01089.
Crossref
Crossref
Mayank Agarwal, Manvandra Kumar Singh, Rajeev Srivastava & Rakesh Kumar Gautam. (2021) Microstructural measurement and artificial neural network analysis for adhesion of tribolayer during sliding wear of powder-chip reinforcement based composites. Measurement 168, pages 108417.
Crossref
Crossref
Nitin Srivastava & Mohd. Anas. (2020) An investigative review of squeeze casting: Processing effects & impact on properties. Materials Today: Proceedings 26, pages 1914-1920.
Crossref
Crossref
Mayank Agarwal, Jitesh Shukla, Ajit Kumar N. Shukla & Rajeev Srivastava. (2020) Microstructural evaluation of Al6061-SS316L cast composite reinforced by Ball-milled Al/Powder-SS316L/chip. Materials Today: Proceedings 26, pages 556-560.
Crossref
Crossref
Semegn Cheneke & D. Benny Karunakar. (2019) The effect of solution treatment on aging behavior and mechanical properties of AA2024-TiB2 composite synthesized by semi-solid casting. SN Applied Sciences 1:11.
Crossref
Crossref
Mayank Agarwal & Rajeev Srivastava. (2019) Effect of thick slurry and stepped deformation on mechanical properties of AA6061 alloy. Emerging Materials Research 8:3, pages 394-403.
Crossref
Crossref
Swati Gangwar, Amar Patnaik, Prabhat Chand Yadav, Sandeep Sahu & I K Bhat. (2019) Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application. Materials Research Express 6:7, pages 076525.
Crossref
Crossref
Mayank Agarwal & Rajeev Srivastava. (2018) Friction, Wear and Mechanical Properties of Al-Si LM6 Cast Alloy Processed in Semi-solid Stage. Silicon 11:1, pages 355-366.
Crossref
Crossref
Mayank Agarwal, Avtar Singh & Rajeev Srivastava. (2017) Influence of Powder-Chip Based Reinforcement on Tensile Properties and Fracture Behaviors of LM6 Aluminum Alloy. Transactions of the Indian Institute of Metals 71:5, pages 1091-1098.
Crossref
Crossref
B Binesh & M Aghaie-Khafri. (2017) Modelling and optimization of semi-solid processing of 7075 Al alloy. Materials Research Express 4:9, pages 096502.
Crossref
Crossref