Citations (47)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Venkatesan K. (2022) Machining of different superalloys under MQL using hBN nanofluids. Advances in Materials and Processing Technologies 0:0, pages 1-36.
Read now
Read now
N. Srirangarajalu, R. Vijayakumar & M. Rajesh. (2022) Multi performance investigation of Inconel-625 by abrasive aqua jet cutting. Materials and Manufacturing Processes 37:12, pages 1393-1404.
Read now
Read now
Shankar Chakraborty & Ankan Mitra. (2018) Parametric optimization of abrasive water-jet machining processes using grey wolf optimizer. Materials and Manufacturing Processes 33:13, pages 1471-1482.
Read now
Read now
Liping Shi, Yu Fang, Qingwen Dai, Wei Huang & Xiaolei Wang. (2018) Surface texturing on SiC by multiphase jet machining with microdiamond abrasives. Materials and Manufacturing Processes 33:13, pages 1415-1421.
Read now
Read now
S. Kalirasu, N. Rajini, S. Rajesh, Suchart Seingchin & S. N. Ramaswamy. (2018) AWJ machinability performance of CS/UPR composites with the effect of chemical treatment. Materials and Manufacturing Processes 33:4, pages 452-461.
Read now
Read now
Articles from other publishers (42)
Venkatesan Kannan & Devendiran Sundararajan. (2022) Investigation of Machining Nimonic 75 with Hexagonal Boron Nitride Nanofluids: Tool Wear, Cutting Forces, Roughness, Residual Stress, and Chip Morphology. SAE International Journal of Advances and Current Practices in Mobility 5:4, pages 1636-1647.
Crossref
Crossref
Devendiran Sundararajan. (2022) Modeling and Optimization of Process Variables in Turning of Inconel 617 through Criteria Importance through Inter-Criteria and Weighted Aggregated Sum Product Assessment Methodology. SAE International Journal of Advances and Current Practices in Mobility 5:4, pages 1653-1667.
Crossref
Crossref
Krzysztof Nadolny, Marcin Romanowski & Paweł Sutowski. (2023) Assessing the technological quality of abrasive water jet and laser cutting processes by geometrical errors and a multiplicative indicator. Measurement 217, pages 113060.
Crossref
Crossref
R. Vijayakumar, N. Srirangarajalu, M. Santhanakumar, N.E. Edwin Paul & M. Rajesh. (2023) Investigation of Abrasive Aqua Jet Hole Making (AAJHM) parameters using desirability analysis on Inconel-625 space alloy. Journal of Manufacturing Processes 92, pages 311-328.
Crossref
Crossref
Ayyagounder Shanmugam, Thangamuthu Mohanraj, Kasilingam Krishnamurthy, Ali Kaya Gur & Ugur Caligulu. (2023) Multi-response optimization on abrasive water jet machining of Aluminum 7075 alloy using Taguchi–DEAR methodology. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311637.
Crossref
Crossref
Jennifer Milaor Llanto, Ana Vafadar & Majid Tolouei-Rad. 2022. Production Engineering and Robust Control. Production Engineering and Robust Control.
Müge Kahya, Emre Doğankaya, Ömer Çaylan, Zarife Göknur Büke & Hakkı Özgür Ünver. (2022) Secondary Processing of Aramid with AWJ and Optimization with NSGA-III. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:5, pages 2164-2175.
Crossref
Crossref
J. Manivannan, S. Rajesh, K. Mayandi, S. Syath Abuthakeer, M. Ravichandran, T. Senthil Muthu Kumar, M. R. Sanjay & Suchart Siengchin. (2022) A novel and prediction approach of sheep wool reinforced polyester composites: Surface qualities and hybrid modeling. Polymer Composites 43:8, pages 5274-5290.
Crossref
Crossref
Samarjit Swain, Isham Panigrahi, Ashok Kumar Sahoo, Amlana Panda & Ramanuj Kumar. (2021) An Experimental Investigation to Augment the Machinability Characteristics During Dry Turning of Ti-6Al-4V Alloy. Arabian Journal for Science and Engineering 47:7, pages 8105-8127.
Crossref
Crossref
D Rajamani, E Balasubramanian, G Dilli Babu & K Ananthakumar. (2020) Experimental investigations on high precision abrasive waterjet cutting of natural fibre reinforced nano clay filled green composites. Journal of Industrial Textiles 51:3_suppl, pages 3786S-3810S.
Crossref
Crossref
Jie Xiong, Liang Wan, Yi’nan Qian, Shuo Sun, Deng Li & Shijing Wu. (2022) A new strategy for improving the surface quality of Ti6Al4V machined by abrasive water jet: reverse cutting with variable standoff distances. The International Journal of Advanced Manufacturing Technology 120:7-8, pages 5339-5350.
Crossref
Crossref
UMANATH KARUPPUSAMY, DEVIKA DAKSHINAMURTHY & RASHIA BEGUM SYED IBRAHIM. (2022) INVESTIGATION OF MACHINABILITY AND GEOMETRY CHARACTERISTICS OF ABRASIVE WATERJET CIRCULAR CUTTING PROCESS ON Ti–6Al–4V ALLOY. Surface Review and Letters 29:04.
Crossref
Crossref
Prakhar Kumar Kharwar & Rajesh Kumar Verma. (2020) Exploration of nature inspired Grey wolf algorithm and Grey theory in machining of multiwall carbon nanotube/polymer nanocomposites. Engineering with Computers 38:2, pages 1127-1148.
Crossref
Crossref
K Umanath, T Nithyanandhan, Adarsh Ajayan, D Devika, M Gokul Prasath, S Aravind Kumar & R Ganeesh. (2022) Machinability study of Aluminium 6082 reinforced with boron carbide and titanium by stir casting method using Abrasive water jet machining process. Engineering Research Express 4:1, pages 015011.
Crossref
Crossref
Tibor Krenicky, Stefania Olejarova & Milos Servatka. (2022) Assessment of the Influence of Selected Technological Parameters on the Morphology Parameters of the Cutting Surfaces of the Hardox 500 Material Cut by Abrasive Water Jet Technology. Materials 15:4, pages 1381.
Crossref
Crossref
Saravanan K, Francis Xavier J, Sudeshkumar M.P, T. Maridurai, Vijayananth Suyamburajan & V. Jayaseelan. (2021) Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method. Silicon 14:3, pages 997-1004.
Crossref
Crossref
Anish Nair, S. Kumanan & K.P. Shanavas. (2022) Heuristic optimization techniques in abrasive water jet hole making – A case study. Materials Today: Proceedings 50, pages 1291-1299.
Crossref
Crossref
T Sathish, K. Arul, Ram Subbiah, M. Ravichandran & V. Mohanavel. (2021) Optimization on end milling operating parameters for super alloy of Inconel 617 by Taguchi’s L27 orthogonal array. Journal of Physics: Conference Series 2027:1, pages 012013.
Crossref
Crossref
Sivakumar Mahalingam, Balaji Kuppusamy & Yuvaraj Natarajan. (2021) Multi-objective Soft Computing Approaches to Evaluate the Performance of Abrasive Water Jet drilling Parameters on Die Steel. Arabian Journal for Science and Engineering 46:8, pages 7893-7907.
Crossref
Crossref
Jennifer Milaor Llanto, Majid Tolouei-Rad, Ana Vafadar & Muhammad Aamir. (2021) Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review. Applied Sciences 11:8, pages 3344.
Crossref
Crossref
S. Chandravadhana, R. Ohmsakthi Vel, D. Shameer, S. Kannappan, R. Nandhakumar & R. Kalyanasundaram. (2021) Surface roughness prediction on drilled holes on strenx steel using AWJM process. Materials Today: Proceedings 45, pages 2419-2421.
Crossref
Crossref
Anish Nair, M. Adam Khan, M. Sivakumar, R.M. Selvaganesh, J. Sushanth & M. Sachin. (2021) Geometric characteristics analysis of hole making through abrasive water jet drilling. Materials Today: Proceedings 39, pages 338-347.
Crossref
Crossref
S. Rajesh, Anish Nair, M. Adam Khan & N. Rajini. 2021. Intelligent Manufacturing. Intelligent Manufacturing
173
193
.
VIDYAPATI KUMAR, PARTHA PROTIM DAS & SHANKAR CHAKRABORTY. (2020) Grey-fuzzy method-based parametric analysis of abrasive water jet machining on GFRP composites. Sādhanā 45:1.
Crossref
Crossref
Marzena Sutowska, Wojciech Kapłonek, Danil Yurievich Pimenov, Munish Kumar Gupta, Mozammel Mia & Shubham Sharma. (2020) Influence of Variable Radius of Cutting Head Trajectory on Quality of Cutting Kerf in the Abrasive Water Jet Process for Soda–Lime Glass. Materials 13:19, pages 4277.
Crossref
Crossref
A. SHANMUGAM, K. KRISHNAMURTHY & T. MOHANRAJ. (2019) EXPERIMENTAL STUDY OF SURFACE ROUGHNESS AND TAPER ANGLE IN ABRASIVE WATER JET MACHINING OF 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY. Surface Review and Letters 27:03, pages 1950112.
Crossref
Crossref
P. V. SIVAPRASAD & A. NOORUL HAQ. (2019) ACCURACY AND SURFACE INTEGRITY ANALYSIS OF MICRO HOLES DRILLED ON HASTELLOY-X ALLOY USING A LASER SOURCE WITH OPTIMIZATION. Surface Review and Letters 27:02, pages 1950109.
Crossref
Crossref
M. Ukamanal, P.C. Mishra & A.K. Sahoo. (2019) Effects of Spray Cooling Process Parameters on Machining Performance AISI 316 Steel: a Novel Experimental Technique. Experimental Techniques 44:1, pages 19-36.
Crossref
Crossref
Som PandeyNathNath, Jogendra Kumar, Sasmit Yadav & Rajesh VermaKumarKumar. (2020) A combined approach of nature-inspired Firefly Algorithm and Weighted Principal Component Analysis in machining of Inconel X-750. FME Transactions 48:2, pages 439-446.
Crossref
Crossref
Soumikh Roy, Ramanuj Kumar, Ashok Kumar Sahoo, Anish Pandey & Amlana Panda. (2020) Investigation on hard turning temperature under a novel pulsating MQL environment: An experimental and modelling approach. Mechanics & Industry 21:6, pages 605.
Crossref
Crossref
Miroslav Radovanovic. (2020) Multi-Objective Optimization of Abrasive Water Jet Cutting Using MOGA. Procedia Manufacturing 47, pages 781-787.
Crossref
Crossref
Yuvaraj Natarajan, Pradeep Kumar Murugesan, Mugilvalavan Mohan & Shakeel Ahmed Liyakath Ali Khan. (2020) Abrasive Water Jet Machining process: A state of art of review. Journal of Manufacturing Processes 49, pages 271-322.
Crossref
Crossref
G. Kibria, I. Shivakoti, S. Das, B. Doloi & B. Bhattacharyya. 2020. Advances in Abrasive Based Machining and Finishing Processes. Advances in Abrasive Based Machining and Finishing Processes
1
28
.
G. Veerappan & M. Ravichandran. (2019) Experimental investigations on abrasive water jet machining of nickel-based superalloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:11.
Crossref
Crossref
K. Venkatesan, Arun Tom Mathew, S. Devendiran, Nouby M Ghazaly, S. Sanjith & R. Raghul. (2019) Machinability study and multi-response optimization of cutting force, Surface roughness and tool wear on CNC turned Inconel 617 superalloy using Al2O3 Nanofluids in Coconut oil. Procedia Manufacturing 30, pages 396-403.
Crossref
Crossref
Fuat Kartal & Sergej Hloch. 2019. Advances in Manufacturing Engineering and Materials. Advances in Manufacturing Engineering and Materials
173
179
.
Murali Ambekar & Jayant Kittur. (2018) An Integrated WPCA-ANN-GA Approach to Solve Multiresponse Optimization Problems. An Integrated WPCA-ANN-GA Approach to Solve Multiresponse Optimization Problems.
K. Giasin. (2018) The effect of drilling parameters, cooling technology, and fiber orientation on hole perpendicularity error in fiber metal laminates. The International Journal of Advanced Manufacturing Technology 97:9-12, pages 4081-4099.
Crossref
Crossref
Andrzej Perec. (2018) Experimental research into alternative abrasive material for the abrasive water-jet cutting of titanium. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 1529-1540.
Crossref
Crossref
Anish Nair & Somasundaram Kumanan. (2018) Optimization of size and form characteristics using multi-objective grey analysis in abrasive water jet drilling of Inconel 617. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:3.
Crossref
Crossref
Shankar Chakraborty, Partha Protim Das & Vidyapati Kumar. (2018) Application of grey-fuzzy logic technique for parametric optimization of non-traditional machining processes. Grey Systems: Theory and Application 8:1, pages 46-68.
Crossref
Crossref
Zefeng Wang, Yong Kang & Yi Cheng. (2017) Multiresponse optimization of process parameters in water jet pulverization via response surface methodology. International Journal of Precision Engineering and Manufacturing 18:12, pages 1855-1871.
Crossref
Crossref