Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 32, 2017 - Issue 12
Submit an article Journal homepage
286
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

Combined effect of thickness ratio and selective heating on weld line movement in stamped tailor-welded blanks

V. V. N. Satya SureshMechanical Engineering Department, Birla Institute of Technology and Science-Pilani, Hyderabad Campus, Hyderabad, India;Mechanical Engineering Department, Mahatma Gandhi Institute of Technology, Hyderabad, IndiaCorrespondence[email protected]
,
Srinivasa Prakash RegallaMechanical Engineering Department, Birla Institute of Technology and Science-Pilani, Hyderabad Campus, Hyderabad, IndiaORCID Iconhttp://orcid.org/0000-0002-4437-355X
ORCID Icon &
Amit Kumar GuptaMechanical Engineering Department, Birla Institute of Technology and Science-Pilani, Hyderabad Campus, Hyderabad, India
Pages 1363-1367 | Received 30 Jun 2016, Accepted 19 Oct 2016, Published online: 27 Dec 2016

Citations (20)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Yonggang Hao & Wei Liu. (2023) Workability improvement on Al alloy inhomogeneous blanks by cryogenic forming. Materials and Manufacturing Processes 38:4, pages 416-426.
Read now
Satish Kumar Sharma, Sachin Maheshwari & Ratnesh Kumar Raj Singh. (2019) Effect of heat-input and cooling-time on bead characteristics in SAW. Materials and Manufacturing Processes 34:2, pages 208-215.
Read now
V. V. N. Satya Suresh, Srinivasa Prakash Regalla & Amit Kumar Gupta. (2017) Influence of geometric parameters on weld line movement in the selective heating of tailor welded blanks. Advances in Materials and Processing Technologies 3:3, pages 385-392.
Read now

Articles from other publishers (17)

D. Bajaj, A. N. Siddiquee, D. L. Chen, S. Konovalov, X. Chen, J. Haider & M. Serier. (2023) Specifics of Formability in Recent Developments of Tailor-Welded Blanks. National Academy Science Letters.
Crossref
Mayavan T. Karthikeyan L. Balamugundan B. Senthil Kumar V. S.. (2022) Forming of Tailor-Welded Blanks Through Centerline and Offset Laser Welding. International Journal of Manufacturing, Materials, and Mechanical Engineering 12:1, pages 1-14.
Crossref
Ahmad Aminzadeh, Noushin Nasiri, Noureddine Barka, Ali Parvizi, Karen Abrinia, Mahmoud Moradi & Sasan Sattarpanah Karganroudi. (2021) Statistical Analysis of Laser-Welded Blanks in Deep Drawing Process: Response Surface Modeling. Journal of Materials Engineering and Performance 31:3, pages 2240-2256.
Crossref
Parviz Kahhal, Jaebong Jung, Yong Chan Hur, Young Hoon Moon & Ji Hoon Kim. (2022) Neural Network-Based Multi-Objective Optimization of Adjustable Drawbead Movement for Deep Drawing of Tailor-Welded Blanks. Materials 15:4, pages 1430.
Crossref
Gireesh Sripathireddy, Shalin Marathe & Harit Raval. 2022. Recent Advances in Manufacturing Processes and Systems. Recent Advances in Manufacturing Processes and Systems 731 746 .
Suresh Arjula, V. V. N. Satya Suresh & S. P. Regalla. 2022. Recent Advances in Manufacturing, Automation, Design and Energy Technologies. Recent Advances in Manufacturing, Automation, Design and Energy Technologies 157 164 .
Sumit Patel, Shalin Marathe, Keyur Desai & Harit Raval. 2021. Advances in Manufacturing Processes. Advances in Manufacturing Processes 123 134 .
A. Karpagaraj, N. Rajesh Kumar, N. Thiyaneshwaran, N. Siva Shanmugam, MuraliMohan Cheepu & R. Sarala. (2020) Experimental and numerical studies on gas tungsten arc welding of Ti–6Al–4V tailor-welded blank. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:10.
Crossref
Ahmad Aminzadeh, Ali Parvizi & Mahmoud Moradi. (2020) Multi-objective topology optimization of deep drawing dissimilar tailor laser welded blanks; experimental and finite element investigation. Optics & Laser Technology 125, pages 106029.
Crossref
Fei Xing, Xiaoming Qiu, Yuzhen Lu, Cui Luo & Dengfeng Wang. (2020) Tailor Welded Partition Blanks: New Methods Improve the Ductility of Ultra-high-strength Welded Joint. ISIJ International 60:2, pages 324-329.
Crossref
Shalin Prakashbhai Marathe & Harit Kishorchandra Raval. (2019) Numerical investigation on forming behavior of friction stir tailor welded blanks (FSTWBs) during single-point incremental forming (SPIF) process. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:10.
Crossref
Anuranjan Kumar, Kanwer Singh Arora, Rajneesh Kumar Gupta & G. A. Harmain. (2019) Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:9.
Crossref
VVN Satya Suresh, Srinivasa Prakash Regalla & Amit Kumar Gupta. (2018) Minimization of weld line movement in heat-assisted forming of tailor welded blanks. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:11, pages 3760-3768.
Crossref
Etiene Pereira de Andrade, Guilherme Souza Assunção, Wellington Augusto dos Santos, Ivanilza Felizardo & Alexandre Queiroz Bracarense. (2019) Caracterização Mecânica e Análise Microestrutural de Chapas Obtidas pelo Processo de Tailor Welded Blank (TWB). Soldagem & Inspeção 24.
Crossref
Shalin Marathe & Harit Raval. 2019. Advances in Computational Methods in Manufacturing. Advances in Computational Methods in Manufacturing 49 63 .
V V N Satya Suresh & Srinivasa Prakash Regalla. (2018) Approximation of initial shape of the weld line in the stamping of tailor welded blanks. IOP Conference Series: Materials Science and Engineering 455, pages 012136.
Crossref
A. Kumar, V. Gautam & D. R. Kumar. (2018) Maximum Bulge Height and Weld Line Displacement in Hydroforming of Tailor Welded Blanks. Journal of Manufacturing Science and Engineering 140:3.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.