Citations (22)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Ankit Aggarwal & Anant Kumar Singh. (2023) Magnetorheological finishing of ball-cup surface using new tool to enhance ball-transfer-unit performance. Materials and Manufacturing Processes 38:10, pages 1226-1242.
Read now
Read now
Sunil Kumar Paswan & Anant Kumar Singh. (2022) Development of a new in-situ rotating magnetorheological honing technique for fine finishing the inner cylindric surfaces. Machining Science and Technology 26:4, pages 665-699.
Read now
Read now
Atul Singh Rajput, Manas Das & Sajan Kapil. (2022) A comprehensive review of magnetorheological fluid assisted finishing processes. Machining Science and Technology 26:3, pages 339-376.
Read now
Read now
Chinu Kumari & Sanjay Kumar Chak. (2021) Experimental studies on material removal behavior in MRAH based finishing technique. Materials and Manufacturing Processes 36:8, pages 916-925.
Read now
Read now
Ankit Aggarwal & Anant Kumar Singh. (2021) Development of grinding wheel type magnetorheological finishing process for blind hole surfaces. Materials and Manufacturing Processes 36:4, pages 457-478.
Read now
Read now
Zafar Alam, Dilshad Ahmad Khan & Sunil Jha. (2018) A study on the effect of polishing fluid volume in ball end magnetorheological finishing process. Materials and Manufacturing Processes 33:11, pages 1197-1204.
Read now
Read now
Vishwas Grover & Anant Kumar Singh. (2018) Improved magnetorheological honing process for nanofinishing of variable cylindrical internal surfaces. Materials and Manufacturing Processes 33:11, pages 1177-1187.
Read now
Read now
Talwinder Singh Bedi & Anant Kumar Singh. (2018) Magnetorheological finishing of ferromagnetic blind-hole type surfaces. Materials and Manufacturing Processes 33:11, pages 1169-1176.
Read now
Read now
Talwinder Singh Bedi & Anant Kumar Singh. (2018) A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces. Materials and Manufacturing Processes 33:11, pages 1141-1149.
Read now
Read now
Jai Kishan Sambharia, Harlal Singh Mali & Vishal Garg. (2018) Experimental investigation on unidirectional abrasive flow machining of trim die workpiece. Materials and Manufacturing Processes 33:6, pages 651-660.
Read now
Read now
Articles from other publishers (12)
Jiyong Li, Zenghua Fan, Zihao Yang, Yebing Tian & Jun Gao. (2023) Simulation and modeling of magnetorheological shear thickening polishing processes for slender tube. Journal of Materials Research and Technology 25, pages 480-496.
Crossref
Crossref
Luguang Guo, Xu Wang, Binghai Lyu, Linlin Cao, Yuechu Mao, Jinhu Wang, Hongyu Chen, Jiahuan Wang & Julong Yuan. (2022) Shear-thickening polishing of inner raceway surface of bearing and suppression of edge effect. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 4055-4068.
Crossref
Crossref
Jing Guo, Lin Gui, Wei Hou, Liwei Sun, Yang Liu & Junye Li. (2022) Quality Study and Numerical Simulation Analysis of Solid–Liquid Two-Phase Magnetic Fluid Polishing Seven-Order Variable-Diameter Pipe. Micromachines 13:4, pages 500.
Crossref
Crossref
Talwinder Singh Bedi & Ajay Singh Rana. (2021) Surface finishing requirements on various internal cylindrical components: A review. Journal of Micromanufacturing 4:2, pages 216-228.
Crossref
Crossref
Ankit Aggarwal & Anant Kumar Singh. (2021) Experimental investigation for fine finishing of the tapered mould cavity using a newly developed GWMRF process. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:9.
Crossref
Crossref
Sunil Kumar Paswan & Anant Kumar Singh. (2020) Investigation of Optimized Parameters for Magnetorheological Finishing the Internal Surface of the Cast-Iron Cylindrical Molds. Arabian Journal for Science and Engineering 46:3, pages 2147-2164.
Crossref
Crossref
Xiao Qin Zhou, Bao Quan Sun, Hao Cheng Wang, Xiao Yang Wu & Hang Yu. (2020) Magnetic Field Analysis of Polishing Tools in Permanent Magnetic Field Polishing Device. Key Engineering Materials 842, pages 272-278.
Crossref
Crossref
Vishwas Grover & Anant Kumar Singh. (2019) Parametric optimization of a newly developed magnetorheological honing process for internal finishing of EN-31 cylindrical workpieces. Engineering Research Express 1:2, pages 025036.
Crossref
Crossref
Vishwas Grover & Anant Kumar Singh. (2017) Improved design of magnetorheological honing tool based on finite element analysis and experimental examination of its performance. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1067-1080.
Crossref
Crossref
Jaikishan Sambharia & Harlal Singh Mali. (2017) Recent developments in abrasive flow finishing process: A review of current research and future prospects. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:2, pages 388-399.
Crossref
Crossref
Chinu Kumari & Sanjay Kumar Chak. (2018) A review on magnetically assisted abrasive finishing and their critical process parameters. Manufacturing Review 5, pages 13.
Crossref
Crossref
Harsh Kansal, Anant Kumar Singh & Vishwas Grover. (2018) Magnetorheological nano-finishing of diamagnetic material using permanent magnets tool. Precision Engineering 51, pages 30-39.
Crossref
Crossref