Citations (41)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (15)
T Satish Kumar, Shalini S & Titus Thankachan. (2023) Friction stir processing based surface modification of AZ31 magnesium alloy. Materials and Manufacturing Processes 38:11, pages 1426-1435.
Read now
Read now
D Rajamani, S. P. Kumaresh Babu & S. Natarajan. (2023) Compression behaviour and strengthening mechanisms for Cu hybrid composites. Advances in Materials and Processing Technologies 0:0, pages 1-12.
Read now
Read now
R. Raja, Sabitha Jannet & Titus Thankachan. (2021) Investigation of hybrid copper surface composite synthesized via FSP. Materials and Manufacturing Processes 36:12, pages 1377-1383.
Read now
Read now
Zhao-Wei Zhong. (2021) Processes for environmentally friendly and/or cost-effective manufacturing. Materials and Manufacturing Processes 36:9, pages 987-1009.
Read now
Read now
Sandeep Kumar & Akshay Dvivedi. (2020) Development of material removal rate model and performance evaluation of ultrasonic turning process. Materials and Manufacturing Processes 35:14, pages 1598-1611.
Read now
Read now
R. Meenakshi & P. Suresh. (2020) WEDM of Cu/WC/SiC composites: development and machining parameters using artificial immune system. Journal of Experimental Nanoscience 15:1, pages 12-25.
Read now
Read now
Aishwarya Payla, Kunal Chopra & Eswara Krishna Mussada. (2019) Investigations on power consumption in WEDM of EN31 steel for sustainable production. Materials and Manufacturing Processes 34:16, pages 1855-1865.
Read now
Read now
Biplab Kumar Roy & Amitava Mandal. (2019) Surface integrity analysis of Nitinol-60 shape memory alloy in WEDM. Materials and Manufacturing Processes 34:10, pages 1091-1102.
Read now
Read now
Kashif Ishfaq & Naveed Ahmed. (2019) WEDM of layered composite: analyzing material removal and cut quality issues. Materials and Manufacturing Processes 34:10, pages 1073-1082.
Read now
Read now
Padmakumar A. Bajakke, Vinayak R. Malik & Anand S. Deshpande. (2019) Particulate metal matrix composites and their fabrication via friction stir processing – a review. Materials and Manufacturing Processes 34:8, pages 833-881.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan & M. Pradeep Kumar. (2019) Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy. Materials and Manufacturing Processes 34:7, pages 814-831.
Read now
Read now
S. Karthik, K. Soorya Prakash, P.M. Gopal & Sathiskumar Jothi. (2019) Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo0.5 MMC. Materials and Manufacturing Processes 34:7, pages 759-768.
Read now
Read now
K.R. Ramkumar & S. Natarajan. (2019) Optimization of GTAW Al 3003 weld using fabricated nanocomposite filler metal. Materials and Manufacturing Processes 34:3, pages 293-302.
Read now
Read now
K. Anil Kumar, S. Natarajan, Muthukannan Duraiselvam & S. Ramachandra. (2019) Synthesis, characterization and mechanical behavior of Al 3003 - TiO2 surface composites through friction stir processing. Materials and Manufacturing Processes 34:2, pages 183-191.
Read now
Read now
Titus Thankachan, K. Soorya Prakash & V. Kavimani. (2018) Effect of friction stir processing and hybrid reinforcements on copper. Materials and Manufacturing Processes 33:15, pages 1681-1692.
Read now
Read now
Articles from other publishers (26)
Santonab Chakraborty, Himalaya Nirjhar Datta & Shankar Chakraborty. (2023) Grey Relational Analysis-Based Optimization of Machining Processes: a Comprehensive Review. Process Integration and Optimization for Sustainability 7:4, pages 609-639.
Crossref
Crossref
Kingshuk Mandal, Mukandar Sekh, Dipankar Bose, Souren Mitra & Soumya Sarkar. (2022) Statistical analysis of process parameters and multi-objective optimization in wire electrical discharge machining of Al 7075 using weight-based constrained algorithm. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:3, pages 1289-1306.
Crossref
Crossref
Rui Zhu, Yupeng Li, Yumeng Sun, Jiacheng Feng & Wenbiao Gong. (2023) Microstructure and properties of FeCoNiCrAl high-entropy alloy particle-reinforced Cu-matrix composites prepared via FSP. Journal of Alloys and Compounds 940, pages 168906.
Crossref
Crossref
V. Kavimani, P. M. Gopal, V. Sivamaran & K. Anand Babu. (2022) Investigations on the WEDM of Friction Stir Processed Magnesium/Graphene-Boron Nitride Hybrid Surface Composite through the Entropy-COPRAS Approach. Advances in Materials Science and Engineering 2022, pages 1-13.
Crossref
Crossref
Weijie Chang, Xiangxiang Li, Haidong Yang, Junsheng Zhang, Juchen Zhang, Huohong Tang & Shunhua Chen. (2022) On the wire EDM of metastable atomic structured bulk metallic glasses. The International Journal of Advanced Manufacturing Technology 120:7-8, pages 5411-5430.
Crossref
Crossref
Suresh Gudipudi, Selvaraj Nagamuthu, Kanmani Subbu Subbian & Surya Prakasa Rao Chilakalapalli. (2021) A comprehensive investigation on machining of composites by EDM for microfeatures and surface integrity. Journal of Micromanufacturing 5:1, pages 5-20.
Crossref
Crossref
M. Meignanamoorthy, T. Anandaraj, M. Ravichandran, V. Mohanavel, S. Sathish, S.M. Sivagami, Wadi B Alonazi, Sami Al Obaid, Saleh Alfarraj, Kaliannan Durairaj & Manikandan Ganesan. (2022) Wire Electrical Discharge Machining Characteristics of Al-4.4 Mg-0.7 Mn-0.15 Cr-12 wt.% MoO3 Composites Using Taguchi Technique. Advances in Materials Science and Engineering 2022, pages 1-10.
Crossref
Crossref
Evgeny A. Terentyev, Julia O. Vladimirova, Evgeny P. Shalunov & Vladimir V. Plotnikov. (2022) Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys. Key Engineering Materials 910, pages 472-477.
Crossref
Crossref
Pragya Saxena, Arunkumar Bongale, Satish Kumar & Priya Jadhav. (2022) Investigation of microstructural and wear behavior of Al6061 surface composites fabricated by friction stir process using Taguchi approach. Materials Research Express 9:1, pages 016522.
Crossref
Crossref
Sateesh Kumar Reddy Kurucheti, G Ranganath, A Nagaraj & Shylin H Jose. (2021) Corrosion rate and surface hardness optimization in wire electrical discharge machining of AISI A2 tool steel in various conductive states and mediums. Materials Research Express 8:7, pages 076001.
Crossref
Crossref
Titus Thankachan, K. Soorya Prakash, V. Kavimani & S. R. Silambarasan. (2020) Machine Learning and Statistical Approach to Predict and Analyze Wear Rates in Copper Surface Composites. Metals and Materials International 27:2, pages 220-234.
Crossref
Crossref
P. Satishkumar, C. Saravana Murthi & R. Meenakshi. (2021) Optimization of machining parameters in wire EDM of OFHC copper using Taguchi analysis. Materials Today: Proceedings 37, pages 922-928.
Crossref
Crossref
G. Lawrance, P. Sam Paul, R. Gokul, M. Subhash, M. Ezhil & J. Ebi Ashish. 2021. Advances in Design and Thermal Systems. Advances in Design and Thermal Systems
493
499
.
Yong–Qiang Qin, Yu Tian, Yu–Qiang Peng, Lai–Ma Luo, Xiang Zan, Qiu Xu & Yu–Cheng Wu. (2020) Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites. Journal of Alloys and Compounds 848, pages 156475.
Crossref
Crossref
A. P. Burmak, B. N. Mordyuk, S. M. Voloshko, V. I. Zakiev & V. V. Mohylko. (2020) Synthesis of Composite Layers on Cu–39Zn–1Pb Brass Using Ultrasonic Impact Treatment. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 42:9, pages 1245-1264.
Crossref
Crossref
Katerina Mouralova, Libor Benes, Tomas Prokes, Josef Bednar, Radim Zahradnicek, Robert Jankovych, Jiri Fries & Jakub Vontor. (2020) Analysis of the Machinability of Copper Alloy Ampcoloy by WEDM. Materials 13:4, pages 893.
Crossref
Crossref
C Sivakandhan, Ganesh Babu Loganathan, G Murali, P Suresh Prabhu, S Marichamy, G Sai Krishnan & Raghuram Pradhan. (2020) Material characterization and unconventional machining on synthesized Niobium metal matrix. Materials Research Express 7:1, pages 015018.
Crossref
Crossref
Kosaraju Satynarayana, Kumkuma Rajkiran, Pujari Anil kumar & D Chakradhar. (2020) A Role of cryogenic in Wire cut EDM process. E3S Web of Conferences 184, pages 01067.
Crossref
Crossref
Ľuboslav Straka & Gabriel Dittrich. (2019) Influence of tool steel properties on surface quality after electrical discharge machining by wire electrode. The International Journal of Advanced Manufacturing Technology 106:5-6, pages 1617-1632.
Crossref
Crossref
Titus Thankachan, K. Soorya Prakash & V. Kavimani. (2019) Investigating the effects of hybrid reinforcement particles on the microstructural, mechanical and tribological properties of friction stir processed copper surface composites. Composites Part B: Engineering 174, pages 107057.
Crossref
Crossref
Abhinaba Roy & Narendranath Sanna Yellappa. (2019) Influence of dielectric flushing conditions during WEDM of TiNiCu shape memory alloys. Emerging Materials Research 8:3, pages 376-386.
Crossref
Crossref
V. Kavimani, K. Soorya Prakash & Titus Thankachan. (2019) Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics. Composites Part B: Engineering 167, pages 621-630.
Crossref
Crossref
Shankar Chakraborty, Prasenjit Chatterjee & Partha Protim Das. (2019) A DoE–TOPSIS method-based meta-model for parametric optimization of non-traditional machining processes. Journal of Modelling in Management 14:2, pages 430-455.
Crossref
Crossref
Titus Thankachan, K. Soorya Prakash, R Malini, S. Ramu, Prabhu Sundararaj, Sivakumar Rajandran, Devaraj Rammasamy & Sathiskumar Jothi. (2019) Prediction of surface roughness and material removal rate in wire electrical discharge machining on aluminum based alloys/composites using Taguchi coupled Grey Relational Analysis and Artificial Neural Networks. Applied Surface Science 472, pages 22-35.
Crossref
Crossref
Subbarayan Sivasankaran. (2019) Optimization on dry sliding wear behavior of yellow brass using face centered composite design. AIMS Materials Science 6:1, pages 80-96.
Crossref
Crossref
K. Ramesh, P. Baranitharan & R. Sakthivel. (2019) Investigation of the stability on boring tool attached with double impact dampers using Taguchi based Grey analysis and cutting tool temperature investigation through FLUKE-Thermal imager. Measurement 131, pages 143-155.
Crossref
Crossref