Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Anjali Gupta, Rajesh Kumar, Harmesh Kumar Kansal & Harry Garg. (2024) Effect of nanoparticles mixing-ratio of Al2O3-MWCNT hybrid nano-cutting fluid during MQL turning. Materials and Manufacturing Processes 39:1, pages 43-54.
Read now
Read now
Ramakrishnan S. (2023) Investigation and optimization of drilled surfaces machined by abrasive water jet machining in Ti-6al-4V alloy. Materials and Manufacturing Processes 38:6, pages 735-746.
Read now
Read now
Subhadip Pradhan, Sourav Sanket Tripathy & Debabrata Dhupal. (2022) Machining of aluminium nitride ceramic using developed hot abrasive jet machining: an experimental and simulation approach. Advances in Materials and Processing Technologies 8:sup2, pages 596-610.
Read now
Read now
N. Srirangarajalu, R. Vijayakumar & M. Rajesh. (2022) Multi performance investigation of Inconel-625 by abrasive aqua jet cutting. Materials and Manufacturing Processes 37:12, pages 1393-1404.
Read now
Read now
Xiaokang Chen, Jianping Zhou, Kedian Wang & Yan Xu. (2022) Experimental research on single-pulse discharge crater morphology in SEAM. Materials and Manufacturing Processes 37:6, pages 664-673.
Read now
Read now
Arunkumar K, Gopal P.M.Kavimani V. (2021) Influence of basalt and graphene fillers and their hybridization on surface quality during AWJM process. Materials and Manufacturing Processes 36:16, pages 1887-1897.
Read now
Read now
Zhao-Wei Zhong. (2021) Processes for environmentally friendly and/or cost-effective manufacturing. Materials and Manufacturing Processes 36:9, pages 987-1009.
Read now
Read now
Umanath K, Devika D & Rashia Begum S. (2021) Experimental Investigation of Role of Particles Size and Cutting Passes in Abrasive Waterjet Machining Process on Titanium Alloy (Ti–6Al–4V) using Taguchi’s Method. Materials and Manufacturing Processes 36:8, pages 936-949.
Read now
Read now
Mathew Alphonse, V. K Bupesh Raja, Manoj Gupta & K. Logesh. (2021) Optimization of coated friction drilling tool for a FML composite. Materials and Manufacturing Processes 36:3, pages 351-361.
Read now
Read now
N. Jeyaprakash & Che-Hua Yang. (2020) Comparative study of NiCrFeMoNb/FeCrMoVC laser cladding process on nickel-based superalloy. Materials and Manufacturing Processes 35:12, pages 1383-1391.
Read now
Read now
T.N. Valarmathi, K. Palanikumar, S. Sekar & B. Latha. (2020) Investigation of the effect of process parameters on surface roughness in drilling of particleboard composite panels using adaptive neuro fuzzy inference system. Materials and Manufacturing Processes 35:4, pages 469-477.
Read now
Read now
Naveed Ahmed, Madiha Rafaqat, Salman Pervaiz, Usama Umer, Hesham Alkhalefa, Muhammad Ali Shar & Syed Hammad Mian. (2019) Controlling the material removal and roughness of Inconel 718 in laser machining. Materials and Manufacturing Processes 34:10, pages 1169-1181.
Read now
Read now
Articles from other publishers (24)
Guo-zhe Yang, Tong-ming Liu, Xing-yu Jiang, Bo-xue Song, Zi-sheng Wang, Qing-ze Tan & Wei-jun Liu. (2023) Rail repair technology based on high-pressure abrasive water jet. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
R. Vijayakumar, N. Srirangarajalu, M. Santhanakumar, N.E. Edwin Paul & M. Rajesh. (2023) Investigation of Abrasive Aqua Jet Hole Making (AAJHM) parameters using desirability analysis on Inconel-625 space alloy. Journal of Manufacturing Processes 92, pages 311-328.
Crossref
Crossref
Mohsen Soori & Behrooz Arezoo. (2023) Minimization of surface roughness and residual stress in abrasive water jet cutting of titanium alloy Ti6Al4V. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311579.
Crossref
Crossref
Subhadip Pradhan & Debabrata Dhupal. (2022) Experimental and simulation approach of surface generation on K-80 alumina ceramic by recently developed sustainable FB-HAJM using novel nozzle design. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:6, pages 2502-2514.
Crossref
Crossref
Soundarapandian Rammohan, Sundaresan Thirumalai Kumaran, Marimuthu Uthayakumar, Kinga Korniejenko, Marek Nykiel & Arumugam Velayutham. (2022) Prediction of Abrasive Waterjet Machining Parameters of Military-Grade Armor Steel by Semi-Empirical and Regression Models. Materials 15:12, pages 4368.
Crossref
Crossref
UMANATH KARUPPUSAMY, DEVIKA DAKSHINAMURTHY & RASHIA BEGUM SYED IBRAHIM. (2022) INVESTIGATION OF MACHINABILITY AND GEOMETRY CHARACTERISTICS OF ABRASIVE WATERJET CIRCULAR CUTTING PROCESS ON Ti–6Al–4V ALLOY. Surface Review and Letters 29:04.
Crossref
Crossref
Subhadip Pradhan, Sudhansu Ranjan Das & Debabrata Dhupal. (2020) Performance Evaluation of Recently Developed New Process HAJM during Machining Hardstone Quartz Using Hot Silicon Carbide Abrasives: an Experimental Investigation and Sustainability Assessment. Silicon 13:9, pages 2895-2919.
Crossref
Crossref
Murahari Kolli, A. V. S Ram Prasad & Dasari Sai Naresh. (2021) Multi-objective optimization of AAJM process parameters for cutting of B4C/Gr particles reinforced Al 7075 composites using RSM-TOPSIS approach. SN Applied Sciences 3:7.
Crossref
Crossref
Joseck Nyaboro, Mahmoud Ahmed, Hassan El-Hofy & Mohamed El-Hofy. (2021) Experimental and numerical investigation of the abrasive waterjet machining of aluminum-7075-T6 for aerospace applications. Advances in Manufacturing 9:2, pages 286-303.
Crossref
Crossref
Zhibin Yu, Chang Li, Zhengwei Chen, Yunfei Li & Xing Han. (2019) Sensitivity Analysis of Laser Quenching Parameters of ASTM 1045 of Disk Laser Based on Response Surface Method. Metals and Materials International 27:5, pages 1236-1251.
Crossref
Crossref
Jennifer Milaor Llanto, Majid Tolouei-Rad, Ana Vafadar & Muhammad Aamir. (2021) Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review. Applied Sciences 11:8, pages 3344.
Crossref
Crossref
SUBHADIP PRADHAN, SUDHANSU RANJAN DAS, BASANTA KUMAR NANDA, PANKAJ CHARAN JENA & DEBABRATA DHUPAL. (2020) MACHINING OF HARDSTONE QUARTZ WITH MODIFIED AJM PROCESS USING HOT SiC ABRASIVES: ANALYSIS, MODELING, OPTIMIZATION, AND COST ANALYSIS. Surface Review and Letters 28:02, pages 2050049.
Crossref
Crossref
Rajiv Kumar Yadav, Kumar Abhishek, Siba Sankar Mahapatra & Goutam Nandi. (2021) A study on machinability aspects and parametric optimization of Inconel 825 using Rao1, Rao2, Rao3 approach. Materials Today: Proceedings 47, pages 2784-2789.
Crossref
Crossref
Subhadip Pradhan, Debabrata Dhupal, Sudhansu Ranjan Das & Pankaj Charan Jena. (2021) Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings 44, pages 1877-1887.
Crossref
Crossref
S. Chandravadhana, R. Ohmsakthi Vel, D. Shameer, S. Kannappan, R. Nandhakumar & R. Kalyanasundaram. (2021) Surface roughness prediction on drilled holes on strenx steel using AWJM process. Materials Today: Proceedings 45, pages 2419-2421.
Crossref
Crossref
Biao Li, Mengmeng Hu, Bo Zhang, Chao Zhang, Zhengyu Liu, Lichao Nie & Wenzheng Cao. (2020) Theoretical Analysis of the Mechanical Effects of Water Jet. Geotechnical and Geological Engineering 39:1, pages 237-246.
Crossref
Crossref
VIDYAPATI KUMAR, PARTHA PROTIM DAS & SHANKAR CHAKRABORTY. (2020) Grey-fuzzy method-based parametric analysis of abrasive water jet machining on GFRP composites. Sādhanā 45:1.
Crossref
Crossref
Subhadip Pradhan, Sudhansu Ranjan Das, Basanta Kumar Nanda, Pankaj Charan Jena & Debabrata Dhupal. (2020) Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:11.
Crossref
Crossref
P. Venkateshwar Reddy, G. Suresh Kumar & V. Satish Kumar. (2020) Multi-response Optimization in Machining Inconel-625 by Abrasive Water Jet Machining Process Using WASPAS and MOORA. Arabian Journal for Science and Engineering 45:11, pages 9843-9857.
Crossref
Crossref
Sunday Oke, Stephen Chidera Nwafor & Chris Abiodun Ayanladun. (2020) Optimisation of Casting Geometries for A356 Alloy Composites Reinforced with Organic Materials using Box-Behnken Design Methodology. Journal of Applied Science & Process Engineering 7:2, pages 524-553.
Crossref
Crossref
Naveed Ahmed, Ateekh Ur Rehman, Kashif Ishfaq, Rakhshanda Naveed, Khaja Moiduddin, Usama Umer, Adham E Ragab & Ayoub Al-Zabidi. (2020) Achieving the Minimum Roughness of Laser Milled Micro-Impressions on Ti 6Al 4V, Inconel 718, and Duralumin. Materials 13:20, pages 4523.
Crossref
Crossref
Olugbenga Ogunbiyi, Tamba Jamiru, Rotimi Sadiku, Oluwagbenga Adesina, Jimmy lolu Olajide & Lodewyk Beneke. (2020) Optimization of spark plasma sintering parameters of inconel 738LC alloy using response surface methodology (RSM). International Journal of Lightweight Materials and Manufacture 3:2, pages 177-188.
Crossref
Crossref
M. Rajesh, K. Rajkumar, K. M. Nambiraj & K. Ramraji. 2020. Advances in Lightweight Materials and Structures. Advances in Lightweight Materials and Structures
569
577
.
G. Veerappan & M. Ravichandran. (2019) Experimental investigations on abrasive water jet machining of nickel-based superalloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:11.
Crossref
Crossref