Citations (40)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Shubham Jain & Vishal Parashar. (2023) WEDM process parameters optimization by preference-based CS & PSO algorithm for LCP. Materials and Manufacturing Processes 38:7, pages 797-815.
Read now
Read now
Tapas Chakraborty, Deepti Ranjan Sahu, Amitava Mandal & Bappa Acherjee. (2023) Feasibility of Jatropha and Rice bran vegetable oils as sustainable EDM dielectrics. Materials and Manufacturing Processes 38:1, pages 50-63.
Read now
Read now
Ferhat Ceritbinmez, Ali Günen, Mst Alpona Akhtar, Kunjal Patel, Sundeep Mukherjee, Lokman Yünlü & Erdoğan Kanca. (2022) Surface integrity characteristics in wire-EDM of HfTaTiVZr refractory high entropy alloy. Advances in Materials and Processing Technologies 0:0, pages 1-18.
Read now
Read now
Sandeep Manikyam & P. Jamaleswara Kumar. (2022) Experimental Investigation And Surface Quality Parameters Optimization In WEDM Machining Of D-Series Tool Steels. Advances in Materials and Processing Technologies 8:sup2, pages 814-825.
Read now
Read now
Saurabh Kumar Maurya, Chander Kant Susheel & Alakesh Manna. (2022) Experimental investigation of wire EDM parameters during machining of fabricated hybrid Al/(SiC+ZrO2+NiTi)-MMC. Advances in Materials and Processing Technologies 0:0, pages 1-11.
Read now
Read now
C. Prakash, P. Senthil, N. Manikandan & D. Palanisamy. (2022) Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26+Graphite+Fly ash) Hybrid Metal Matrix Composites for automobile components. Materials and Manufacturing Processes 37:7, pages 748-763.
Read now
Read now
Vishnu Vardhana Naidu B, K. C Varaprasad & K. Prahlada Rao. (2021) Machinability analysis on wire electrical discharge machining of stir casted AA2024/Al2O3/BN hybrid composite for aerospace applications. Materials and Manufacturing Processes 36:6, pages 730-743.
Read now
Read now
Kashif Ishfaq, Muhammad Umar Farooq, Saqib Anwar, Muhammad Asad Ali, Shafiq Ahmad & Ahmed M. El-Sherbeeny. (2021) A comprehensive investigation of geometrical accuracy errors during WEDM of Al6061-7.5%SiC composite. Materials and Manufacturing Processes 36:3, pages 362-372.
Read now
Read now
N. Manikandan, K. Balasubramanian, D. Palanisamy, P.M. Gopal, D. Arulkirubakaran & J.S. Binoj. (2019) Machinability Analysis and ANFIS modelling on Advanced Machining of Hybrid Metal Matrix Composites for Aerospace Applications. Materials and Manufacturing Processes 34:16, pages 1866-1881.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan, M. Pradeep Kumar & M. A. Muthu Manickam. (2019) Experimental investigation on boring of HSLA ASTM A36 steel under dry, wet, and cryogenic environments. Materials and Manufacturing Processes 34:12, pages 1352-1379.
Read now
Read now
Articles from other publishers (30)
Babatunde Alade Sawyerr, Ebun Fasina, Wasiu Oyediran Adedeji, Mofoluso Kehinde Adeniran, Sunday Ayoola Oke & John Rajan. (2023) A fuzzy TOPSIS method for surface integrity criteria ranking using the wire electrical discharge machining process. Journal of Engineering and Applied Science 70:1.
Crossref
Crossref
Srinjoy Chatterjee, Partha Protim Das & Shankar Chakraborty. (2023) A comparative study on parametric optimization of a wire-electrical discharge machining process using MCDM methods in intuitionistic fuzzy environment. Multiscale and Multidisciplinary Modeling, Experiments and Design.
Crossref
Crossref
A. G. Mohan Das Gandhi, P. M. Gopal, R. Shenbagaraj & V. Kavimani. (2023) Effect of SiC reinforcement on Mechanical and Machinability Characteristics of Mg/SiC/B4C Hybrid Composite Developed Through Stir Casting. Silicon 15:13, pages 5635-5645.
Crossref
Crossref
A. Hemalatha, V. Diwakar Reddy & S. Hemachandra. (2023) Optimization of process parameters for wire electrical discharge machining of aluminium based metal matrix composite by Taguchi’s approach. Materials Today: Proceedings.
Crossref
Crossref
Kingshuk Mandal, Mukandar Sekh, Dipankar Bose, Souren Mitra & Soumya Sarkar. (2022) Statistical analysis of process parameters and multi-objective optimization in wire electrical discharge machining of Al 7075 using weight-based constrained algorithm. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:3, pages 1289-1306.
Crossref
Crossref
Sanghamitra Das & Shrikrishna N. Joshi. 2023. Advances in Modern Machining Processes. Advances in Modern Machining Processes
77
85
.
P. R. KannanK. PeriasamyP. PravinJ. R. Vinod Kumaar. (2022) An experimental investigation of wire breakage and performance optimisation of WEDM process on machining of recycled aluminium alloy metal matrix composite. Materials Science-Poland 40:3, pages 12-26.
Crossref
Crossref
B Vishnu Vardhana Naidu, Manikandan Natarajan, Ramesh R, Lakshmi Narayana SOMSOLE & Thejasree Pasupuleti. Machinability Studies on Wire Electrical Discharge Machining of Aluminium Based Metal Matrix Composite for Automotive Applications. Machinability Studies on Wire Electrical Discharge Machining of Aluminium Based Metal Matrix Composite for Automotive Applications.
Sathishkumar Seshaiah, Deepak Sampathkumar, Mathanbabu Mariappan, Ashokkumar Mohankumar, Guruprasad Balachandran, Murugan Kaliyamoorthy, Barathiraja Rajendran & Rajendiran Gopal. (2022) Optimization on Material Removal Rate and Surface Roughness of Stainless Steel 304 Wire Cut EDM by Response Surface Methodology. Advances in Materials Science and Engineering 2022, pages 1-10.
Crossref
Crossref
A. Hemalatha, V. Diwakar Reddy & Kalapala Prasad. (2022) Evolution of regression and ANFIS models for wire spark erosion machining of aluminium metal matrix composites for aerospace applications. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Md Nadeem Alam, Arshad Noor Siddiquee, Zahid A Khan & Noor Zaman Khan. (2022) A comprehensive review on wire EDM performance evaluation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:4, pages 1724-1746.
Crossref
Crossref
K. Raju, M. Balakrishnan, D. V. S. S. S. V. Prasad, V. Nagalakshmi, Pravin P. Patil, S. Kaliappan, B. Arulmurugan, K. Radhakrishnan, B. Velusamy, Prabhu Paramasivam & A. El-Denglawey. (2022) Optimization of WEDM Process Parameters in Al2024-Li-Si3N4 MMC. Journal of Nanomaterials 2022, pages 1-12.
Crossref
Crossref
C. Prakash, P. Senthil, N. Manikandan & D. Palanisamy. (2022) Investigations and regression modeling on mechanical characterization of cast aluminum alloy based (LM 26 + graphite + fly ash) hybrid metal matrix composites. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Suresh Gudipudi, Selvaraj Nagamuthu, Kanmani Subbu Subbian & Surya Prakasa Rao Chilakalapalli. (2021) A comprehensive investigation on machining of composites by EDM for microfeatures and surface integrity. Journal of Micromanufacturing 5:1, pages 5-20.
Crossref
Crossref
Senthil Kumar S, Sudhakara Pandian R, Pitchipoo P, P Narayanasamy & T S Senthilkumar. (2022)
Surface and subsurface investigation of Al-Mg-MoS
2
composite on performing wire electrical discharge machining
. Surface Topography: Metrology and Properties 10:1, pages 015047.
Crossref
Crossref
N.K. Batra, Ravinder Pal Singh & Sahil Dayal. (2022) Experimental investigation and statistical modelling of cutting speed in AL6063-W composite by wire EDM process. Materials Today: Proceedings 62, pages 1408-1412.
Crossref
Crossref
K Ramraji, K Rajkumar, G Selvakumar & Ram Prakash S. (2021)
Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB
2
alloy in WEDM
. Surface Topography: Metrology and Properties 9:3, pages 035029.
Crossref
Crossref
R. Gopal, K. Thirunavukkarasu, V. Kavimani & P. M. Gopal. (2021) Measurement and Multi-response Optimization of Spark Erosion Machining Parameters for Titanium Alloy Using Hybrid Taguchi–Grey Relational Analysis–Principal Component Analysis Approach. Journal of Materials Engineering and Performance 30:4, pages 3129-3143.
Crossref
Crossref
Mohd Saif & Satyam Tiwari. (2021) Investigation towards surface roughness & material removal rate in Wire-EDM of aluminium alloy 6061 and 5083 using Taguchi method. Materials Today: Proceedings 47, pages 1040-1047.
Crossref
Crossref
Ranit Karmakar & Pabitra Maji. (2021) Research advancements in machining of metal matrix composites through wire electro discharge machining technique. Materials Today: Proceedings 44, pages 4457-4461.
Crossref
Crossref
J. Arun Prakash, P. Shanmughasundaram & P.S. Sreelakshmy. (2021) Optimization of mechanical, tribological and machining parameters of aluminium MMC's LM6 and ADC 12. Materials Today: Proceedings 37, pages 1996-2000.
Crossref
Crossref
P. Vignesh Kumar, C. Nithiyapathi, A. Daniel Das & V. Preethi. (2021) Development of Al-Gr-Ca hybrid composite for braking application. Materials Today: Proceedings 37, pages 1982-1985.
Crossref
Crossref
S. Aravind, P. Ragupathi & G. Vignesh. (2021) Numerical and experimental approach to eliminate defects in al alloy pump- crank case processed through gravity die casting route. Materials Today: Proceedings 37, pages 1772-1777.
Crossref
Crossref
R. Karuppasamy & Debabrata Barik. (2021) Production methods of aluminium foam: A brief review. Materials Today: Proceedings 37, pages 1584-1587.
Crossref
Crossref
A. Daniel Das & K. Thirunavukkarasu. (2021) Parametric optimization of FWTPET for optimum tensile strength by genetic algorithm approach. Materials Today: Proceedings 37, pages 1571-1577.
Crossref
Crossref
B. Narenthiran & P. Paranthaman. (2021) Investigations on effect of FSW process parameter on hybrid Al MMC using Taguchi approach. Materials Today: Proceedings 37, pages 759-763.
Crossref
Crossref
P. Paranthaman. (2021) Experimental evaluation of surface finish in cylindrical grinding of Al7075/RHA/BN composite. Materials Today: Proceedings 37, pages 754-758.
Crossref
Crossref
N. Sathiesh Kumar. (2021) Fabrication and characterization of Al7075 / RHA /Mica composite by squeeze casting. Materials Today: Proceedings 37, pages 750-753.
Crossref
Crossref
P. Ragupathi & N. Sathiesh Kumar. (2021) Optimization of machining parameters for minimal temperature in cylindrical grinding of Al7075/RHA composite. Materials Today: Proceedings 37, pages 745-749.
Crossref
Crossref
Laurenţiu Slătineanu, Oana Dodun, Margareta Coteaţă, Gheorghe Nagîţ, Irina Beşliu Băncescu & Adelina Hriţuc. (2020) Wire Electrical Discharge Machining—A Review. Machines 8:4, pages 69.
Crossref
Crossref