Citations (32)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Uma Maheshwera Reddy Paturi, Dheeraj Goud Vanga, Rennie Bowen Duggem, Nitin Kotkunde, N.S. Reddy & Sunil Dutta. (2023) Estimation of surface roughness of direct metal laser sintered AlSi10Mg using artificial neural networks and response surface methodology. Materials and Manufacturing Processes 38:14, pages 1798-1808.
Read now
Read now
Lan Zhang, Yongquan Sun, Gang Wang & Ming Liu. (2021) Research on MD simulation for diamond tool cutting iron. Molecular Simulation 47:1, pages 46-57.
Read now
Read now
Weiwei Ming, Jiaqiang Dang, Qinglong An & Ming Chen. (2020) Chip formation and hole quality in dry drilling additive manufactured Ti6Al4V. Materials and Manufacturing Processes 35:1, pages 43-51.
Read now
Read now
U. Prisco, A. Astarita, A. El Hassanin & S. Franchitti. (2019) Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy. Materials and Manufacturing Processes 34:15, pages 1753-1760.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan, M. Pradeep Kumar & M. A. Muthu Manickam. (2019) Experimental investigation on boring of HSLA ASTM A36 steel under dry, wet, and cryogenic environments. Materials and Manufacturing Processes 34:12, pages 1352-1379.
Read now
Read now
Articles from other publishers (27)
Hwa-Sub Lee, Dong-Hyun Seo, HyunHo Lee, Jin Hyeong Kim & Eun-Chae Jeon. (2023) Analysis of the Correlation between the Theoretical and Measured Surface Roughness Values of Difficult-to-Cut Materials Subjected
to Drilling. Journal of the Korean Society of Manufacturing Process Engineers 22:8, pages 55-62.
Crossref
Crossref
Alpay Tamer Ertürk, Eser Yarar, Gökhan Özer & Mustafa Enes Bulduk. (2023) Post-process drilling of AlSi10Mg parts by laser powder bed fusion. The International Journal of Advanced Manufacturing Technology 126:3-4, pages 1199-1212.
Crossref
Crossref
Lukasz Nowakowski, Michal Skrzyniarz, Slawomir Blasiak, Jaroslaw Rolek, Dimka Vasileva & Tanya Avramova. (2023) Analyzing the Potential of Drill Bits 3D Printed Using the Direct Metal Laser Melting (DMLM) Technology to Drill Holes in Polyamide 6 (PA6). Materials 16:8, pages 3035.
Crossref
Crossref
Ali Elgazzar, Sheng-Jian Zhou, Jia-Hu Ouyang, Zhan-Guo Liu, Yu-Jin Wang & Ya-Ming Wang. (2023) A Critical Review of High-Temperature Tribology and Cutting Performance of Cermet and Ceramic Tool Materials. Lubricants 11:3, pages 122.
Crossref
Crossref
Xiaoliang Liang, Zhanqiang Liu, Bing Wang, Chunjin Wang & Chi Fai Cheung. (2022) Friction behaviors in the metal cutting process: state of the art and future perspectives. International Journal of Extreme Manufacturing 5:1, pages 012002.
Crossref
Crossref
A. T. Erturk. 2023. Advances in Processing of Lightweight Metal Alloys and Composites. Advances in Processing of Lightweight Metal Alloys and Composites
417
432
.
R. Venkatesh, S. Kathiravan, R. Prabhakaran, M. Ramar, J. Jerold John Britto & S. Rajakarunakaran. 2023. Recent Advances in Materials Technologies. Recent Advances in Materials Technologies
553
561
.
Hakan Dedeakayoğulları, Alaattin Kaçal & Kübra Keser. (2022) Modeling and prediction of surface roughness at the drilling of SLM-Ti6Al4V parts manufactured with pre-hole with optimized ANN and ANFIS. Measurement 203, pages 112029.
Crossref
Crossref
Gianluca Parodo, Felice Rubino, Luca Sorrentino & Sandro Turchetta. (2022) Temperature analysis in fiber metal laminates drilling: Experimental and numerical results. Polymer Composites 43:10, pages 7600-7615.
Crossref
Crossref
Parth Raval, Deep Patel, Ravikumar Prajapati, Vishvesh Badheka, Munish Kumar Gupta & Navneet Khanna. (2022) Energy consumption and economic modelling of performance measures in machining of wire arc additively manufactured Inconel-625. Sustainable Materials and Technologies 32, pages e00434.
Crossref
Crossref
Sajjad Ahmad, Soham Mujumdar & Vinay Varghese. (2022) Role of porosity in machinability of additively manufactured Ti-6Al-4V. Precision Engineering 76, pages 397-406.
Crossref
Crossref
Hakan Dedeakayogulları & Alaattin Kacal. (2022) Experimental investigation of hole quality in drilling of additive manufacturing Ti6Al4V parts produced by hole features. Journal of Manufacturing Processes 79, pages 745-758.
Crossref
Crossref
Hamed Tanabi. (2022) Machinability of alloy ductile iron and forged 16MnCr5 steel. Materials Testing 64:3, pages 455-462.
Crossref
Crossref
Guangxian Li, Sanjeet Chandra, Rizwan Abdul Rahman Rashid, Suresh Palanisamy & Songlin Ding. (2022) Machinability of additively manufactured titanium alloys: A comprehensive review. Journal of Manufacturing Processes 75, pages 72-99.
Crossref
Crossref
Jiaqiang DANG, Heng ZANG, Qinglong AN, Weiwei MING & Ming CHEN. (2022) Feasibility study of creep feed grinding of 300M steel with zirconium corundum wheel. Chinese Journal of Aeronautics 35:3, pages 565-578.
Crossref
Crossref
Lei Li, Yujun Cai, Guohe Li & Meng Liu. (2022) Research Status of Subsequent Machining of Laser Cladding Layers. Recent Patents on Engineering 16:1.
Crossref
Crossref
Arshad Noor Siddiquee. 2022. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Kashif Ishfaq, Mirza Abdullah & Muhammad Arif Mahmood. (2021) A state-of-the-art direct metal laser sintering of Ti6Al4V and AlSi10Mg alloys: Surface roughness, tensile strength, fatigue strength and microstructure. Optics & Laser Technology 143, pages 107366.
Crossref
Crossref
Navneet Khanna, Kishan Zadafiya, Tej Patel, Yusuf Kaynak, Rizwan Abdul Rahman Rashid & Ana Vafadar. (2021) Review on machining of additively manufactured nickel and titanium alloys. Journal of Materials Research and Technology 15, pages 3192-3221.
Crossref
Crossref
Jiaqiang Dang, Heng Zhang, Qinglong An, Weiwei Ming & Ming Chen. (2021) On the microstructural evolution pattern of 300 M steel subjected to surface cryogenic grinding treatment. Journal of Manufacturing Processes 68, pages 169-185.
Crossref
Crossref
Tiago EF Silva, Ana Amaral, André Couto, João Coelho, Ana Reis, Pedro AR Rosa & Abílio MP de Jesus. (2021) Comparison of the machinability of the 316L and 18Ni300 additively manufactured steels based on turning tests. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442072110149.
Crossref
Crossref
Qinglong An, Bingfu Zhong, Xianfeng Wang, Hongzhou Zhang, Xiaofeng Sun & Ming Chen. (2021) Effects of drilling strategies for CFRP/Ti stacks on static mechanical property and fatigue behavior of open-hole CFRP laminates. Journal of Manufacturing Processes 64, pages 409-420.
Crossref
Crossref
Jiaqiang Dang, Heng Zhang, Qinglong An, Weiwei Ming & Ming Chen. (2021) Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process. Journal of Manufacturing Processes 61, pages 1-14.
Crossref
Crossref
J.G. Lopes, Carla M. Machado, Valdemar R. Duarte, Tiago A. Rodrigues, Telmo G. Santos & J.P. Oliveira. (2020) Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM). Journal of Manufacturing Processes 59, pages 739-749.
Crossref
Crossref
Heng Zhang, Jiaqiang Dang, Weiwei Ming, Xingwei Xu, Ming Chen & Qinglong An. (2020) Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes. Ceramics International 46:10, pages 14536-14547.
Crossref
Crossref
Yusuf Karabulut & Yusuf Kaynak. (2020) Drilling process and resulting surface properties of Inconel 718 alloy fabricated by Selective Laser Melting Additive Manufacturing. Procedia CIRP 87, pages 355-359.
Crossref
Crossref
Umberto Prisco, Filomena Impero & F. Rubino. (2019) Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy. Production Engineering 13:5, pages 529-538.
Crossref
Crossref