Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Jatinder Garg, Kulwant Singh, Love Kumar & Lalta Prasad. (2024) Development of submerged arc welding flux from rice straw ash. Materials and Manufacturing Processes 39:2, pages 259-268.
Read now
Read now
Zuguo Liu, Huiyang Chen & Xiangzhong Jin. (2023) Experimental investigation and optimization of co-axial ring + core dual beam laser welding parameters for SUS301 stainless steel sheet. Materials and Manufacturing Processes 38:5, pages 554-569.
Read now
Read now
Din Bandhu, Jay J. Vora, Subhash Das, Ashish Thakur, Soni Kumari, Kumar Abhishek & M. Nagaphani Sastry. (2022) Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel. Materials and Manufacturing Processes 37:15, pages 1727-1745.
Read now
Read now
Balram Yelamasetti, Venkat Ramana G, Sandeep Manikyam & Kuldeep K Saxena. (2022) Multi-response Taguchi grey relational analysis of mechanical properties and weld bead dimensions of dissimilar joint of AA6082 and AA7075. Advances in Materials and Processing Technologies 8:sup3, pages 1474-1484.
Read now
Read now
Swagat Dwibedi & Swarup Bag. (2022) Influence of process parameters on microstructural evolution, solidification mode, and impact strength in joining of stainless steel thin sheets. Advances in Materials and Processing Technologies 8:sup3, pages 1089-1104.
Read now
Read now
Mohd Aqeel, J. P. Gautam & S. M. Shariff. (2022) Influence of heat input on bead profile and microstructure characteristics in laser and laser-hybrid welding of Inconel 617 alloy. Welding International 36:5, pages 256-270.
Read now
Read now
Din Bandhu, Soni Kumari, Vishalkumar Prajapati, Kuldeep K. Saxena & Kumar Abhishek. (2021) Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel. Materials and Manufacturing Processes 36:13, pages 1524-1534.
Read now
Read now
Din Bandhu & Kumar Abhishek. (2021) Assessment of weld bead geometry in modified shortcircuiting gas metal arc welding process for low alloy steel. Materials and Manufacturing Processes 36:12, pages 1384-1402.
Read now
Read now
Mohd Aqeel, S.M Shariff, J.P Gautam & G. Padmanabham. (2021) Liquation cracking in Inconel 617 alloy by Laser and Laser-Arc Hybrid welding. Materials and Manufacturing Processes 36:8, pages 904-915.
Read now
Read now
Dipali Pandya, Amarish Badgujar & Nilesh Ghetiya. (2021) A novel perception toward welding of stainless steel by activated TIG welding: a review. Materials and Manufacturing Processes 36:8, pages 877-903.
Read now
Read now
Articles from other publishers (26)
D. S. Sahota, Amit Bansal & Vinod Kumar. (2023) Microwave Butt Joining of Stainless Steel (SS-316L) With an SS-316L Powder. Transactions of the Indian Institute of Metals 76:12, pages 3303-3312.
Crossref
Crossref
A. R. Pavan, T. Sakthivel, B. Arivazhagan, M. Vasudevan & B. R. Vaishnavi Krupa. (2023) Microstructures and Creep Properties of Type 316LN Stainless Steel Weld Joints. Metallurgical and Materials Transactions A 54:12, pages 4868-4890.
Crossref
Crossref
S. Palanisamy, R. Rajendran & S. Shashi Kumar. (2023) Effect of travel speed on the microstructure and mechanical properties of laser beam welded nitronic-50 stainless steel joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237:8, pages 1847-1860.
Crossref
Crossref
A.R. Pavan, B. Arivazhagan, M. Vasudevan, T.N. Prasanthi & C. Sudha. (2023) Study on the microstructure and mechanical properties of hybrid laser + MIG welded joints of 316LN stainless steel. Optics & Laser Technology 163, pages 109410.
Crossref
Crossref
Prashant Kumar Pandey, Mahipal Singh, Rajeev Rathi & Jagesvar Verma. (2023) Analysis and optimization of welding techniques for austenitic stainless steel using grey relational analysis. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Peikang Tao, Xiong Zhang, Gaoyang Mi & Chunming Wang. (2023) Research on fiber laser welding formation, microstructure, and mechanical properties of 7.5 mm 304 stainless steel. Journal of Materials Research and Technology 24, pages 236-249.
Crossref
Crossref
Nilakantha Sahu, Deepankar Panda, Sushant Kumar Badjena, Santosh Kumar Sahoo & Pravin Kumar Kar. (2022) Multicomponent Flux for Improved Penetration and Metallurgical Properties Using A-GTAW. Journal of Materials Engineering and Performance 32:9, pages 4237-4248.
Crossref
Crossref
Akhilesh Kumar, Atul Babbar, Vivek Jain, Dheeraj Gupta, Bhargav Prajwal Pathri, Chander Prakash, Kuldeep Kumar Saxena & Sandeep Kumar. (2023) Investigation and enhancement of mechanical properties of SS-316 weldment using TiO2-SiO2-Al2O3 hybrid flux. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Linyi Xie, Wenqing Shi, Teng Wu, Meimei Gong, Detao Cai, Shanguo Han & Kuanfang He. (2022) Effect of Hybrid Laser Arc Welding on the Microstructure and Mechanical and Fracture Properties of 316L Sheet Welded Joints. Metals 12:12, pages 2181.
Crossref
Crossref
Jianzhao Wu, Chaoyong Zhang, Kunlei Lian, Jiahao Sun & Shuaikun Zhang. (2022) Processing parameter optimization of fiber laser beam welding using an ensemble of metamodels and MOABC. Frontiers of Mechanical Engineering 17:4.
Crossref
Crossref
Víctor García-García. (2022) Microstructural and mechanical analysis of double pass dissimilar welds of twinning induced plasticity steel to austenitic/duplex stainless steels. International Journal of Pressure Vessels and Piping 198, pages 104665.
Crossref
Crossref
Debasish Das, Soumitra Kumar Dinda, Amit Kumar Das, Dilip Kumar Pratihar & Gour Gopal Roy. (2022) Study of micro-porosity in electron beam butt welding. The International Journal of Advanced Manufacturing Technology 121:7-8, pages 4583-4600.
Crossref
Crossref
Yuhua Cai, Yi Luo, Fanshun Tang, Xinxin Wang, Fuyuan Zhang, Yanrui Peng & Shuqing Yang. (2022) Effect of laser energy excitation position on the microstructure in laser-arc hybrid heat source processing. Welding in the World 66:5, pages 879-894.
Crossref
Crossref
Jian Han, Lian-meng Liu, Xin-ya Chen, Min-fang Chen, Lei Cui, Yang-chuan Cai & Yin-bao Tian. (2021) Comparison of feasibility, microstructure and performance of hybrid laser arc, activated flux tungsten inert gas and friction stir welding for thick plate of innovative ultra-pure ferritic stainless steel. Journal of Iron and Steel Research International 29:4, pages 665-676.
Crossref
Crossref
Petr Mohyla, Jiri Hajnys, Lucie Gembalová, Andrea Zapletalová & Pavel Krpec. (2022) Influence of Heat Treatment of Steel AISI316L Produced by the Selective Laser Melting Method on the Properties of Welded Joint. Materials 15:5, pages 1690.
Crossref
Crossref
Artem Aleksandrovich Voropaev, Vladimir Georgievich Protsenko, Dmitriy Andreevich Anufriyev, Mikhail Valerievich Kuznetsov, Aleksey Alekseevich Mukhin, Maksim Nikolaevich Sviridenko & Sergey Vyacheslavovich Kuryntsev. (2022) Influence of Laser Beam Wobbling Parameters on Microstructure and Properties of 316L Stainless Steel Multi Passed Repaired Parts. Materials 15:3, pages 722.
Crossref
Crossref
Morgane Mokhtari, Pierrick Pommier, Yannick Balcaen & Joel Alexis. (2021) Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes. Journal of Manufacturing and Materials Processing 5:4, pages 136.
Crossref
Crossref
A.R. Pavan, N. Chandrasekar, B. Arivazhagan, S. Kumar & M. Vasudevan. (2021) Study of arc characteristics using varying shielding gas and optimization of activated-tig welding technique for thick AISI 316L(N) plates. CIRP Journal of Manufacturing Science and Technology 35, pages 675-690.
Crossref
Crossref
Leilei Wang, Yanqiu Zhao, Yue Li & Xiaohong Zhan. (2021) Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys. Metals 11:10, pages 1510.
Crossref
Crossref
Glauco Nobrega, Maria Sabrina Souza, Manuel Rodríguez-Martín, Pablo Rodríguez-Gonzálvez & João Ribeiro. (2021) Parametric Optimization of the GMAW Welding Process in Thin Thickness of Austenitic Stainless Steel by Taguchi Method. Applied Sciences 11:18, pages 8742.
Crossref
Crossref
R Rajasekaran & AK Lakshminarayanan. (2020) Probing the stress corrosion cracking resistance of laser beam welded AISI 316LN austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:17, pages 3299-3317.
Crossref
Crossref
Balram Yelamasetti, T Vishnu Vardhan & G Venkat Ramana. (2020) Study of metallurgical changes and mechanical properties of dissimilar weldments developed by interpulse current TIG welding technique. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:16, pages 2985-2997.
Crossref
Crossref
Swagat Dwibedi & Swarup Bag. (2021) Development of Micro-plasma Arc Welding System for Different Thickness Dissimilar Austenitic Stainless Steels. Journal of The Institution of Engineers (India): Series C 102:3, pages 657-671.
Crossref
Crossref
Abdulaziz Albannai, Abdulkareem Aloraier, Ayman Alaskari, Meshal Alawadhi & Suraj Joshi. (2021) Effects of tandem side-by-side GTAW welds on centerline solidification cracking of AA2024. Manufacturing Technology 21:2, pages 151-163.
Crossref
Crossref
Kora T. Sunny & Nanda Naik Korra. (2021) A systematic review about welding of super austenitic stainless steel. Materials Today: Proceedings 47, pages 4378-4381.
Crossref
Crossref
Anoop K. Unni & Vasudevan Muthukumaran. (2020) Numerical simulation of the influence of oxygen content on the weld pool depth during activated TIG welding. The International Journal of Advanced Manufacturing Technology 112:1-2, pages 467-489.
Crossref
Crossref