http://orcid.org/0000-0003-2471-4502
Citations (91)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Pradip Kumar Yadav, Sanjoy Das & Malay K. Das. (2023) 3D-Microneedles: A novel approach for skin directed delivery and its application. Polymer-Plastics Technology and Materials 62:11, pages 1364-1393.
Read now
Read now
Kundai R. Mazarura, Pradeep Kumar & Yahya E. Choonara. (2022) Customized 3D printed multi-drug systems: an effective and efficient approach to polypharmacy. Expert Opinion on Drug Delivery 19:9, pages 1149-1163.
Read now
Read now
Nazeer Hasan, Ankit Kumar Malik, Vanshikha Singh, Kaisar Raza, Farhan J. Ahmad, Prashant Kesharwani & Gaurav K. Jain. (2021) Recent update of 3D printing technology in pharmaceutical formulation development. Journal of Biomaterials Science, Polymer Edition 32:17, pages 2306-2330.
Read now
Read now
Dinesh Choudhury, Upadhyayula Suryanarayana Murty & Subham Banerjee. (2021) 3D printing and enteric coating of a hollow capsular device with controlled drug release characteristics prepared using extruded Eudragit® filaments. Pharmaceutical Development and Technology 26:9, pages 1010-1020.
Read now
Read now
Niloufar Keikhosravi, Seyedeh Zahra Mirdamadian, Jaleh Varshosaz & Azade Taheri. (2020) Preparation and characterization of polypills containing aspirin and simvastatin using 3D printing technology for the prevention of cardiovascular diseases. Drug Development and Industrial Pharmacy 46:10, pages 1665-1675.
Read now
Read now
Articles from other publishers (86)
L.I. Kocabas, S. Ayyoubi, M. Tajqurishi, J. Quodbach, T. Vermonden & R.J. Kok. (2024) 3D-printed prednisolone phosphate suppositories with tunable dose and rapid release for the treatment of inflammatory bowel disease. International Journal of Pharmaceutics 649, pages 123639.
Crossref
Crossref
Dinesh Nyavanandi, Sagar Narala & Michael A. Repka. 2024. 3D Printing. 3D Printing
169
194
.
Sateesh Kumar Vemula, Amruta Prabhakar Padakanti, Naveen Chella, Sagar Narala, Preethi Lakkala, Nagarjuna Narala & Siva Ram Munnangi. 2024. 3D Printing. 3D Printing
139
165
.
Revati Dharampal Sagare, Fatima Sanjeri Dasankoppa, Hasanpasha N. Sholapur, N.R. Banapurmath & M.A. Umarfarooq. (2023) Doped halloysite nanotubes as a nanocontainer for the fabrication of ciprofloxacin hydrochloride loaded 3D printed scaffolds. Journal of Drug Delivery Science and Technology 86, pages 104637.
Crossref
Crossref
Elke Prasad, John Robertson, Alastair J. Florence & Gavin W. Halbert. (2023) Expanding the pharmaceutical formulation space in material extrusion 3D printing applications. Additive Manufacturing 77, pages 103803.
Crossref
Crossref
Sofiya Ilieva, Dilyana Georgieva, Valentina Petkova & Milen Dimitrov. (2023) Study and Characterization of Polyvinyl Alcohol-Based Formulations for 3D Printlets Obtained via Fused Deposition Modeling. Pharmaceutics 15:7, pages 1867.
Crossref
Crossref
Chloé Parulski, Laure-Anne Bya, Justine Goebel, Anne-Catherine Servais, Anna Lechanteur & Brigitte Evrard. (2023) Development of 3D printed mini-waffle shapes containing hydrocortisone for children’s personalized medicine. International Journal of Pharmaceutics 642, pages 123131.
Crossref
Crossref
R. Durga Prasad Reddy & Varun Sharma. (2023) Investigations of hybrid infill pattern in additive manufactured tablets: A novel approach towards tunable drug release. Journal of Biomedical Materials Research Part B: Applied Biomaterials.
Crossref
Crossref
Zara Khizer, Muhammad R. Akram, Muhammad Azam Tahir, Weidong Liu, Shan Lou, Barbara R. Conway & Muhammad Usman Ghori. (2023) Personalised 3D-Printed Mucoadhesive Gastroretentive Hydrophilic Matrices for Managing Overactive Bladder (OAB). Pharmaceuticals 16:3, pages 372.
Crossref
Crossref
Nuha Mohammed AbdulkhaleqMowafaq M. Ghareeb. (2023) 3D Printing of Baclofen Gastro-Floating Drug Delivery Systems: A Comparison Study with In vitro and In vivo Evaluation. Research Journal of Pharmacy and Technology, pages 363-372.
Crossref
Crossref
Shanshan Wang, Xuejun Chen, Xiaolu Han, Xiaoxuan Hong, Xiang Li, Hui Zhang, Meng Li, Zengming Wang & Aiping Zheng. (2023) A Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future. Pharmaceutics 15:2, pages 416.
Crossref
Crossref
Dolores R. Serrano, Aytug Kara, Iván Yuste, Francis C. Luciano, Baris Ongoren, Brayan J. Anaya, Gracia Molina, Laura Diez, Bianca I. Ramirez, Irving O. Ramirez, Sergio A. Sánchez-Guirales, Raquel Fernández-García, Liliana Bautista, Helga K. Ruiz & Aikaterini Lalatsa. (2023) 3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals. Pharmaceutics 15:2, pages 313.
Crossref
Crossref
Antonella Sola & Adrian Trinchi. 2023. Fused Deposition Modeling of Composite Materials. Fused Deposition Modeling of Composite Materials
109
129
.
Antonella Sola & Adrian Trinchi. 2023. Fused Deposition Modeling of Composite Materials. Fused Deposition Modeling of Composite Materials
329
445
.
Ayyoubi S, van Kampen EEM, Kocabas LI, Parulski C, Lechanteur A, Evrard B, De Jager K, Muller E, Wilms EW, Meulenhoff PWC & Ruijgrok EJ. (2022) 3D printed, personalized sustained release cortisol for patients with adrenal insufficiency. International Journal of Pharmaceutics, pages 122466.
Crossref
Crossref
Liam Krueger, Jared A. Miles & Amirali Popat. (2022) 3D printing hybrid materials using fused deposition modelling for solid oral dosage forms. Journal of Controlled Release 351, pages 444-455.
Crossref
Crossref
Julian Quodbach, Malte Bogdahn, Jörg Breitkreutz, Rebecca Chamberlain, Karin Eggenreich, Alessandro Giuseppe Elia, Nadine Gottschalk, Gesine Gunkel-Grabole, Lena Hoffmann, Dnyaneshwar Kapote, Thomas Kipping, Stefan Klinken, Fabian Loose, Tristan Marquetant, Hellen Windolf, Simon Geißler & Tilmann Spitz. (2021) Quality of FDM 3D Printed Medicines for Pediatrics: Considerations for Formulation Development, Filament Extrusion, Printing Process and Printer Design. Therapeutic Innovation & Regulatory Science 56:6, pages 910-928.
Crossref
Crossref
Guluzar Gorkem Buyukgoz, Christopher G. Kossor, Shen Ji, Murat Guvendiren & Rajesh N. Davé. (2022) Dose Titration of Solid Dosage Forms via FDM 3D-Printed Mini-Tablets. Pharmaceutics 14:11, pages 2305.
Crossref
Crossref
David Hartzke, Axel Pössl, Peggy Schlupp & Frank E. Runkel. (2022) Evaluation of Hydroxyethyl Cellulose Grades as the Main Matrix Former to Produce 3D-Printed Controlled-Release Dosage Forms. Pharmaceutics 14:10, pages 2103.
Crossref
Crossref
Joana Macedo, Nuno F. da Costa, Valérie Vanhoorne, Chris Vervaet & João F. Pinto. (2022) The Precision and Accuracy of 3D Printing of Tablets by Fused Deposition Modelling. Journal of Pharmaceutical Sciences 111:10, pages 2814-2826.
Crossref
Crossref
Chloé Parulski, Eva Gresse, Olivier Jennotte, Alexandre Felten, Eric Ziemons, Anna Lechanteur & Brigitte Evrard. (2022) Fused deposition modeling 3D printing of solid oral dosage forms containing amorphous solid dispersions: How to elucidate drug dissolution mechanisms through surface spectral analysis techniques?. International Journal of Pharmaceutics 626, pages 122157.
Crossref
Crossref
Antonella Sola. (2022) Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites. Macromolecular Materials and Engineering 307:10.
Crossref
Crossref
Peyton Hopson. 2022. Additive Manufacturing in Biomedical Applications. Additive Manufacturing in Biomedical Applications
486
508
.
Sagar Salave, Kedar Prayag, Dhwani Rana, Prakash Amate, Rupali Pardhe, Ajinkya Jadhav, Anil B Jindal & Derajram Benival. (2022) Recent Progress in Hot Melt Extrusion Technology in Pharmaceutical
Dosage Form Design. Recent Advances in Drug Delivery and Formulation 16:3, pages 170-191.
Crossref
Crossref
Peilun Zhang, Pengchong Xu, Sooyeon Chung, Suresh Bandari & Michael A. Repka. (2022) Fabrication of bilayer tablets using hot melt extrusion-based dual-nozzle fused deposition modeling 3D printing. International Journal of Pharmaceutics 624, pages 121972.
Crossref
Crossref
Erin Walsh, Natalie Maclean, Alice Turner, Moulham Alsuleman, Elke Prasad, Gavin Halbert, Joop H. ter Horst & Daniel Markl. (2022) Manufacture of tablets with structurally-controlled drug release using rapid tooling injection moulding. International Journal of Pharmaceutics 624, pages 121956.
Crossref
Crossref
Wei Juene Chong, Shirley Shen, Yuncang Li, Adrian Trinchi, Dejana Pejak, Ilias (Louis) Kyratzis, Antonella Sola & Cuie Wen. (2022) Additive manufacturing of antibacterial PLA-ZnO nanocomposites: Benefits, limitations and open challenges. Journal of Materials Science & Technology 111, pages 120-151.
Crossref
Crossref
Siddhant Palekar, Pavan Kumar Nukala & Ketan Patel. (2022) Aversion liquid-filled drug releasing capsule (3D-RECAL): A novel technology for the development of immediate release abuse deterrent formulations using a fused deposition modelling (FDM) 3D printer. International Journal of Pharmaceutics 621, pages 121804.
Crossref
Crossref
R. Durga Prasad Reddy, Haytham Elgazzar & Varun Sharma. (2021) Investigations of personalized and sustainable approach of oral drug delivery systems through additive manufacturing. Rapid Prototyping Journal 28:5, pages 855-872.
Crossref
Crossref
Ji Hoon Kim, Kyeongjin Kim & Hyo-Eon Jin. (2022) Three-Dimensional Printing for Oral Pharmaceutical Dosage Forms. Journal of Pharmaceutical Investigation 52:3, pages 293-317.
Crossref
Crossref
Ana Luiza Lima, Felipe Q. Pires, Leandro Augusto Hilgert, Livia L. Sa-Barreto, Tais Gratieri, Guilherme M. Gelfuso & Marcilio Cunha-Filho. (2022) Oscillatory shear rheology as an in-process control tool for 3D printing medicines production by fused deposition modeling. Journal of Manufacturing Processes 76, pages 850-862.
Crossref
Crossref
Garba M. Khalid & Nashiru Billa. (2022) Solid Dispersion Formulations by FDM 3D Printing—A Review. Pharmaceutics 14:4, pages 690.
Crossref
Crossref
Ryan Varghese, Sahil Salvi, Purab Sood, Jainam Karsiya & Dileep Kumar. (2022) 3D printed medicine for the management of chronic diseases: The road less travelled. Annals of 3D Printed Medicine 5, pages 100043.
Crossref
Crossref
Filip Zavřel, Matěj Novák, Jiřina Kroupová, Celine Beveridge, František Štěpánek & Gabriela Ruphuy. (2021) Development of Hot‐Melt Extrusion Method to Produce Hydroxyapatite/Polycaprolactone Composite Filaments. Advanced Engineering Materials 24:3, pages 2100820.
Crossref
Crossref
Hellen Windolf, Rebecca Chamberlain, Arnaud Delmotte & Julian Quodbach. (2022) Blind-Watermarking—Proof-of-Concept of a Novel Approach to Ensure Batch Traceability for 3D Printed Tablets. Pharmaceutics 14:2, pages 432.
Crossref
Crossref
Nadine Gottschalk, Julian Quodbach, Alessandro-Giuseppe Elia, Florian Hess & Malte Bogdahn. (2022) Determination of feed forces to improve process understanding of Fused Deposition Modeling 3D printing and to ensure mass conformity of printed solid oral dosage forms. International Journal of Pharmaceutics 614, pages 121416.
Crossref
Crossref
Ashish Kalkal, Prince Allawadhi, Pramod Kumar, Abhishek Sehgal, Ashmit Verma, Kaustubh Pawar, Rangadhar Pradhan, Biswaranjan Paital & Gopinath Packirisamy. (2022) Sensing and 3D printing technologies in personalized healthcare for the management of health crises including the COVID-19 outbreak. Sensors International 3, pages 100180.
Crossref
Crossref
Abdul Aleem Mohammed, Mohammed S. Algahtani, Mohammad Zaki Ahmad, Javed Ahmad & Sabna Kotta. (2021) 3D Printing in medicine: Technology overview and drug delivery applications. Annals of 3D Printed Medicine 4, pages 100037.
Crossref
Crossref
Samiha Obeid, Marijana Madžarević & Svetlana Ibrić. (2021) Tailoring amlodipine release from 3D printed tablets: Influence of infill patterns and wall thickness. International Journal of Pharmaceutics 610, pages 121261.
Crossref
Crossref
Marija Đuranović, Marijana Madžarević, Branka Ivković, Svetlana Ibrić & Sandra Cvijić. (2021) The evaluation of the effect of different superdisintegrants on the drug release from FDM 3D printed tablets through different applied strategies: In vitro-in silico assessment. International Journal of Pharmaceutics 610, pages 121194.
Crossref
Crossref
Guluzar Gorkem Buyukgoz, Christopher Gordon Kossor & Rajesh N. Davé. (2021) Enhanced Supersaturation via Fusion-Assisted Amorphization during FDM 3D Printing of Crystalline Poorly Soluble Drug Loaded Filaments. Pharmaceutics 13:11, pages 1857.
Crossref
Crossref
Ludmila A. G. Pinho, Ana Luiza Lima, Livia L. Sa-Barreto, Tais Gratieri, Guilherme M. Gelfuso, Ricardo Neves Marreto & Marcilio Cunha-Filho. (2021) Preformulation Studies to Guide the Production of Medicines by Fused Deposition Modeling 3D Printing. AAPS PharmSciTech 22:8.
Crossref
Crossref
Yee M. Than & Varin Titapiwatanakun. (2021) Statistical design of experiment-based formulation development and optimization of 3D printed oral controlled release drug delivery with multi target product profile. Journal of Pharmaceutical Investigation 51:6, pages 715-734.
Crossref
Crossref
Yanis A. Gueche, Noelia M. Sanchez-Ballester, Bernard Bataille, Adrien Aubert, Jean-Christophe Rossi & Ian Soulairol. (2021) A QbD Approach for Evaluating the Effect of Selective Laser Sintering Parameters on Printability and Properties of Solid Oral Forms. Pharmaceutics 13:10, pages 1701.
Crossref
Crossref
Silke Henry, Lien De Vadder, Milan Decorte, Susanna Francia, Magali Van Steenkiste, Jan Saevels, Valérie Vanhoorne & Chris Vervaet. (2021) Development of a 3D-Printed Dosing Platform to Aid in Zolpidem Withdrawal Therapy. Pharmaceutics 13:10, pages 1684.
Crossref
Crossref
Rydvikha Govender, Eric Ofosu Kissi, Anette Larsson & Ingunn Tho. (2021) Polymers in pharmaceutical additive manufacturing: A balancing act between printability and product performance. Advanced Drug Delivery Reviews 177, pages 113923.
Crossref
Crossref
Muhammad Arif Mahmood. (2021) 3D Printing in Drug Delivery and Biomedical Applications: A State-of-the-Art Review. Compounds 1:3, pages 94-115.
Crossref
Crossref
Hellen Windolf, Rebecca Chamberlain & Julian Quodbach. (2021) Predicting Drug Release from 3D Printed Oral Medicines Based on the Surface Area to Volume Ratio of Tablet Geometry. Pharmaceutics 13:9, pages 1453.
Crossref
Crossref
Juliana dos Santos, Guilherme Silveira da Silva, Maiara Callegaro Velho & Ruy Carlos Ruver Beck. (2021) Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics. Pharmaceutics 13:9, pages 1424.
Crossref
Crossref
Chloé Parulski, Olivier Jennotte, Anna Lechanteur & Brigitte Evrard. (2021) Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?. Advanced Drug Delivery Reviews 175, pages 113810.
Crossref
Crossref
Eric Ofosu Kissi, Robin Nilsson, Liebert Parreiras Nogueira, Anette Larsson & Ingunn Tho. (2021) Influence of Drug Load on the Printability and Solid-State Properties of 3D-Printed Naproxen-Based Amorphous Solid Dispersion. Molecules 26:15, pages 4492.
Crossref
Crossref
Bin Zhang, Jehad Nasereddin, Thomas McDonagh, Didier von Zeppelin, Andy Gleadall, Fahad Alqahtani, Richard Bibb, Peter Belton & Sheng Qi. (2021) Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing. International Journal of Pharmaceutics 604, pages 120626.
Crossref
Crossref
Srushti Tambe, Divya Jain, Yashvi Agarwal & Purnima Amin. (2021) Hot-melt extrusion: Highlighting recent advances in pharmaceutical applications. Journal of Drug Delivery Science and Technology 63, pages 102452.
Crossref
Crossref
Sanjeevani Deshkar, Mrunali Rathi, Shital Zambad & Krishnakant Gandhi. (2021) Hot Melt Extrusion and its Application in 3D Printing of Pharmaceuticals. Current Drug Delivery 18:4, pages 387-407.
Crossref
Crossref
Alice Melocchi, Marco Uboldi, Francesco Briatico-Vangosa, Saliha Moutaharrik, Matteo Cerea, Anastasia Foppoli, Alessandra Maroni, Luca Palugan, Lucia Zema & Andrea Gazzaniga. (2021) The Chronotopic™ System for Pulsatile and Colonic Delivery of Active Molecules in the Era of Precision Medicine: Feasibility by 3D Printing via Fused Deposition Modeling (FDM). Pharmaceutics 13:5, pages 759.
Crossref
Crossref
Samiha Obeid, Marijana Madžarević, Mirjana Krkobabić & Svetlana Ibrić. (2021) Predicting drug release from diazepam FDM printed tablets using deep learning approach: Influence of process parameters and tablet surface/volume ratio. International Journal of Pharmaceutics 601, pages 120507.
Crossref
Crossref
Nagireddy Dumpa, Arun Butreddy, Honghe Wang, Neeraja Komanduri, Suresh Bandari & Michael A. Repka. (2021) 3D printing in personalized drug delivery: An overview of hot-melt extrusion-based fused deposition modeling. International Journal of Pharmaceutics 600, pages 120501.
Crossref
Crossref
Suresh Bandari, Dinesh Nyavanandi, Nagireddy Dumpa & Michael A. Repka. (2021) Coupling hot melt extrusion and fused deposition modeling: Critical properties for successful performance. Advanced Drug Delivery Reviews 172, pages 52-63.
Crossref
Crossref
Hilda Amekyeh, Faris Tarlochan & Nashiru Billa. (2021) Practicality of 3D Printed Personalized Medicines in Therapeutics. Frontiers in Pharmacology 12.
Crossref
Crossref
Yee Mon Than & Varin Titapiwatanakun. (2021) Tailoring immediate release FDM 3D printed tablets using a quality by design (QbD) approach. International Journal of Pharmaceutics 599, pages 120402.
Crossref
Crossref
Gunpreet Oberoi, Sophie Nitsch, Klara Janjić, Hassan Shokoohi-Tabrizi, Andreas Moritz, Francesco Moscato, Ewald Unger & Hermann Agis. (2020) The impact of 3D-printed LAY-FOMM 40 and LAY-FOMM 60 on L929 cells and human oral fibroblasts. Clinical Oral Investigations 25:4, pages 1869-1877.
Crossref
Crossref
Soumya R. SATAPATHY, Rudra N. SAHOO, Souvik NANDI, Biswaranjan SATAPATHY, Lalatendu PANIGRAHI & Subrata MALLICK. (2021) 3D printing in managing supply disruptions related to COVID-19 pandemic: Food and Drug Administration's current thinking on regulation. Minerva Biotechnology and Biomolecular Research 33:1.
Crossref
Crossref
Nour Nashed, Matthew Lam & Ali Nokhodchi. (2021) A comprehensive overview of extended release oral dosage forms manufactured through hot melt extrusion and its combination with 3D printing. International Journal of Pharmaceutics 596, pages 120237.
Crossref
Crossref
Nadine Gottschalk, Malte Bogdahn, Meike Harms & Julian Quodbach. (2021) Brittle polymers in Fused Deposition Modeling: An improved feeding approach to enable the printing of highly drug loaded filament. International Journal of Pharmaceutics 597, pages 120216.
Crossref
Crossref
Sylvain Cailleaux, Noelia M. Sanchez-Ballester, Yanis A. Gueche, Bernard Bataille & Ian Soulairol. (2021) Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines. Journal of Controlled Release 330, pages 821-841.
Crossref
Crossref
Tim Feuerbach & Markus Thommes. (2021) Design and Characterization of a Screw Extrusion Hot-End for Fused Deposition Modeling. Molecules 26:3, pages 590.
Crossref
Crossref
Marija Đuranović, Samiha Obeid, Marijana Madžarević, Sandra Cvijić & Svetlana Ibrić. (2021) Paracetamol extended release FDM 3D printlets: Evaluation of formulation variables on printability and drug release. International Journal of Pharmaceutics 592, pages 120053.
Crossref
Crossref
Alice Melocchi, Francesco Briatico-Vangosa, Marco Uboldi, Federico Parietti, Maximilian Turchi, Didier von Zeppelin, Alessandra Maroni, Lucia Zema, Andrea Gazzaniga & Ahmed Zidan. (2021) Quality considerations on the pharmaceutical applications of fused deposition modeling 3D printing. International Journal of Pharmaceutics 592, pages 119901.
Crossref
Crossref
Manjusha Annaji, Sindhu Ramesh, Ishwor Poudel, Manoj Govindarajulu, Robert D. Arnold, Muralikrishnan Dhanasekaran & R. Jayachandra Babu. (2020) Application of Extrusion-Based 3D Printed Dosage Forms in the Treatment of Chronic Diseases. Journal of Pharmaceutical Sciences 109:12, pages 3551-3568.
Crossref
Crossref
Agnieszka Haryńska, Iga Carayon, Paulina Kosmela, Anna Brillowska-Dąbrowska, Marcin Łapiński, Justyna Kucińska-Lipka & Helena Janik. (2020) Processing of Polyester-Urethane Filament and Characterization of FFF 3D Printed Elastic Porous Structures with Potential in Cancellous Bone Tissue Engineering. Materials 13:19, pages 4457.
Crossref
Crossref
Alice Melocchi, Marco Uboldi, Matteo Cerea, Anastasia Foppoli, Alessandra Maroni, Saliha Moutaharrik, Luca Palugan, Lucia Zema & Andrea Gazzaniga. (2020) A Graphical Review on the Escalation of Fused Deposition Modeling (FDM) 3D Printing in the Pharmaceutical Field. Journal of Pharmaceutical Sciences 109:10, pages 2943-2957.
Crossref
Crossref
Pengchong Xu, Jiangwei Li, Alvin Meda, Frederick Osei-Yeboah, Matthew L. Peterson, Michael Repka & Xi Zhan. (2020) Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing. International Journal of Pharmaceutics 588, pages 119760.
Crossref
Crossref
Gabriela G. Pereira, Sara Figueiredo, Ana Isabel Fernandes & João F. Pinto. (2020) Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics. Pharmaceutics 12:9, pages 795.
Crossref
Crossref
Shery Jacob, Anroop B. Nair, Vimal Patel & Jigar Shah. (2020) 3D Printing Technologies: Recent Development and Emerging Applications in Various Drug Delivery Systems. AAPS PharmSciTech 21:6.
Crossref
Crossref
Grona Chen, Yihua Xu, Philip Chi Lip Kwok & Lifeng Kang. (2020) Pharmaceutical Applications of 3D Printing. Additive Manufacturing 34, pages 101209.
Crossref
Crossref
Bahaa Shaqour, Aseel Samaro, Bart Verleije, Koen Beyers, Chris Vervaet & Paul Cos. (2020) Production of Drug Delivery Systems Using Fused Filament Fabrication: A Systematic Review. Pharmaceutics 12:6, pages 517.
Crossref
Crossref
Hanna Ponsar, Raphael Wiedey & Julian Quodbach. (2020) Hot-Melt Extrusion Process Fluctuations and Their Impact on Critical Quality Attributes of Filaments and 3D-Printed Dosage Forms. Pharmaceutics 12:6, pages 511.
Crossref
Crossref
Olivier Jennotte, Nathan Koch, Anna Lechanteur & Brigitte Evrard. (2020) Three-dimensional printing technology as a promising tool in bioavailability enhancement of poorly water-soluble molecules: A review. International Journal of Pharmaceutics 580, pages 119200.
Crossref
Crossref
Deck Khong Tan, Mohammed Maniruzzaman & Ali Nokhodchi. (2019) Development and Optimisation of Novel Polymeric Compositions for Sustained Release Theophylline Caplets (PrintCap) via FDM 3D Printing. Polymers 12:1, pages 27.
Crossref
Crossref
Muqdad Alhijjaj, Jehad Nasereddin, Peter Belton & Sheng Qi. (2019) Impact of Processing Parameters on the Quality of Pharmaceutical Solid Dosage Forms Produced by Fused Deposition Modeling (FDM). Pharmaceutics 11:12, pages 633.
Crossref
Crossref
Zara Khizer, Muhammad R. Akram, Rai M. Sarfraz, Jorabar Singh Nirwan, Samia Farhaj, Maria Yousaf, Tariq Hussain, Shan Lou, Peter Timmins, Barbara R. Conway & Muhammad Usman Ghori. (2019) Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies. Polymers 11:7, pages 1095.
Crossref
Crossref
Marius Tidau, Arno Kwade & Jan Henrik Finke. (2019) Influence of High, Disperse API Load on Properties along the Fused-Layer Modeling Process Chain of Solid Dosage Forms. Pharmaceutics 11:4, pages 194.
Crossref
Crossref
Marilena Saviano, Rita Patrizia Aquino, Pasquale Del Gaudio, Francesca Sansone & Paola Russo. (2019) Poly(vinyl alcohol) 3D printed tablets: The effect of polymer particle size on drug loading and process efficiency. International Journal of Pharmaceutics 561, pages 1-8.
Crossref
Crossref
Maisa Araújo, Livia Sa-Barreto, Tais Gratieri, Guilherme Gelfuso & Marcilio Cunha-Filho. (2019) The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality. Pharmaceutics 11:3, pages 128.
Crossref
Crossref
Carolin Korte & Julian Quodbach. (2018) 3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction. AAPS PharmSciTech 19:8, pages 3333-3342.
Crossref
Crossref
Ziyaur Rahman, Sogra F. Barakh Ali, Tanil Ozkan, Naseem A. Charoo, Indra K. Reddy & Mansoor A. Khan. (2018) Additive Manufacturing with 3D Printing: Progress from Bench to Bedside. The AAPS Journal 20:6.
Crossref
Crossref