Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 15, 2011 - Issue 1
Submit an article Journal homepage
672
Views
81
CrossRef citations to date
0
Altmetric
Original Articles

AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION

Erween A. Rahim Department of Mechanical System Engineering, Tokyo University of Agriculture and Technology, Japan; Faculty of Mechanical & Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, MalaysiaCorrespondence[email protected]
&
Hiroyuki Sasahara Department of Mechanical System Engineering, Tokyo University of Agriculture and Technology, Japan
Pages 76-90 | Published online: 18 Mar 2011

Citations (81)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Muhammad Jamil, Aqib Mashood Khan, Ning He, Liang Li, Asif Iqbal & Mozammel Mia. (2019) Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing. Machining Science and Technology 23:6, pages 1022-1046.
Read now
Nuraliza Noorawzi & Syahrullail Samion. (2016) Tribological Effects of Vegetable Oil as Alternative Lubricant: A Pin-on-Disk Tribometer and Wear Study. Tribology Transactions 59:5, pages 831-837.
Read now
Vishal S. Sharma, GurRaj Singh & Knut Sørby. (2015) A Review on Minimum Quantity Lubrication for Machining Processes. Materials and Manufacturing Processes 30:8, pages 935-953.
Read now
D. M. Razak, S. Syahrullail, N. Sapawe, Y. Azli & N. Nuraliza. (2015) A New Approach Using Palm Olein, Palm Kernel Oil, and Palm Fatty Acid Distillate as Alternative Biolubricants: Improving Tribology in Metal-on-Metal Contact. Tribology Transactions 58:3, pages 511-517.
Read now
Xiaojiang Cai, Sheng Qin, Junli Li, Qinglong An & Ming Chen. (2014) EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY— INCONEL 718 . Machining Science and Technology 18:1, pages 31-46.
Read now

Articles from other publishers (76)

Adel T. Abbas, Neeraj Sharma, Mahmoud S. Soliman, Magdy M. El Rayes, Rakesh Chandmal Sharma & Ahmed Elkaseer. (2023) Effect of Wiper Edge Geometry on Machining Performance While Turning AISI 1045 Steel in Dry Conditions Using the VIKOR-ML Approach. Machines 11:7, pages 719.
Crossref
Ahmed Mohamed Mahmoud IBRAHIM, Wei LI, Abdel-Hamid ISMAIL MOURAD, Mohamed A.E. OMER, Fadl A. ESSA, Ahmed Mustafa ABD EL-NABY, Mohammad S.Al SOUFI, Muhammad F. EZZAT & Ammar ElSHEIKH. (2023) Cooling and lubrication techniques in grinding: A state-of-the-art review, applications, and sustainability assessment. Chinese Journal of Aeronautics 36:7, pages 76-113.
Crossref
Shu Zhou, Dazhong Wang, Shujing Wu, Guquan Gu, Guojun Dong, Qinglong An, Hun Guo & Changhe Li. (2023) Minimum quantity lubrication machining nickel base alloy: a comprehensive review. The International Journal of Advanced Manufacturing Technology.
Crossref
Saqib Anwar, Nauman Ahmad Khan, Sarmad Ali Khan & Syed Farhan Raza. (2023) One-Step High-Speed Finish Drilling of Inconel 718 Superalloy via Novel Inserts. Processes 11:3, pages 752.
Crossref
Soumikh Roy, Ramanuj Kumar, Ashutosh Satpathy & Ashok Kumar Sahoo. (2023) Current status of various coolant applications in machining of nickel-base superalloys. Materials Today: Proceedings 78, pages 535-542.
Crossref
M. Naresh Babu, V. Anandan, N. L. Parthasarathi, Cagri Vakkas Yildirim, M. Dinesh Babu & Sudhansu Ranjan Das. (2022) Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:12.
Crossref
SARTHAK PRASAD SAHOO, KSHITIJ PANDEY & SAURAV DATTA. (2022) Performance of uncoated/coated carbide inserts during MQL (sunflower oil) assisted machining of Inconel 718 superalloy. Sādhanā 47:4.
Crossref
Yanbin Zhang, Hao Nan Li, Changhe Li, Chuanzhen Huang, Hafiz Muhammad Ali, Xuefeng Xu, Cong Mao, Wenfeng Ding, Xin Cui, Min Yang, Tianbiao Yu, Muhammad Jamil, Munish Kumar Gupta, Dongzhou Jia & Zafar Said. (2022) Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms. Friction 10:6, pages 803-841.
Crossref
Amrit Pal, Sukhpal Singh Chatha & Hazoor Singh Sidhu. (2021) Performance Evaluation of Various Vegetable Oils and Distilled Water as Base Fluids Using Eco-friendly MQL Technique in Drilling of AISI 321 Stainless Steel. International Journal of Precision Engineering and Manufacturing-Green Technology 9:3, pages 745-764.
Crossref
Jay Airao, Chandrakant K. Nirala, José Outeiro & Navneet Khanna. (2022) Surface integrity in ultrasonic-assisted turning of Ti6Al4V using sustainable cutting fluid. Procedia CIRP 108, pages 55-60.
Crossref
Pradeep Kumar Mishra, Periyaswamy Kalidas & Jagadesh T.. (2021) Hole geometry and surface integrity assessment in drilling of inconel 718 using laser texture filled solid lubricant tools. Industrial Lubrication and Tribology 73:10, pages 1267-1274.
Crossref
Uma Maheshwera Reddy Paturi, Vidhya Darshini B.N.S. Reddy. (2021) Progress of machinability on the machining of Inconel 718: A comprehensive review on the perception of cleaner machining. Cleaner Engineering and Technology 5, pages 100323.
Crossref
Mohamed Asyraf Mahboob Ali, Azwan Iskandar Azmi, Muhamad Nasir Murad, Norshah Aizat Shuaib & J. Paulo Davim. (2021) On the effects of bio-based nanolubricants formulation for the turning of Inconel 718. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:12.
Crossref
Andrea De Bartolomeis, Stephen T. Newman, I.S. Jawahir, Dirk Biermann & Alborz Shokrani. (2021) Future research directions in the machining of Inconel 718. Journal of Materials Processing Technology 297, pages 117260.
Crossref
Murat Sarıkaya, Munish Kumar Gupta, Italo Tomaz, Danil Yu Pimenov, Mustafa Kuntoğlu, Navneet Khanna, Çağrı Vakkas Yıldırım & Grzegorz M. Krolczyk. (2021) A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys. CIRP Journal of Manufacturing Science and Technology 35, pages 624-658.
Crossref
Qingan Yin, Changhe Li, Lan Dong, Xiufang Bai, Yanbin Zhang, Min Yang, Dongzhou Jia, Runze Li & Zhanqiang Liu. (2021) Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045. International Journal of Precision Engineering and Manufacturing-Green Technology 8:6, pages 1629-1647.
Crossref
K.C. Wickramasinghe, Hiroyuki Sasahara, Erween Abd Rahim & G.I.P. Perera. (2021) Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based metal working fluids. Journal of Cleaner Production 310, pages 127459.
Crossref
Luca W. Reolon, Myriam H. Aguirre, Kenji Yamamoto, Qinfu Zhao, Igor Zhitomirsky, German Fox-Rabinovich & Stephen Clarence Veldhuis. (2021) A Comprehensive Study of Al0.6Ti0.4N Coatings Deposited by Cathodic Arc and HiPIMS PVD Methods in Relation to Their Cutting Performance during the Machining of an Inconel 718 Alloy. Coatings 11:6, pages 723.
Crossref
Andrea De Bartolomeis, Stephen T. Newman, Dirk Biermann & Alborz Shokrani. (2021) State-of-The-Art Cooling and Lubrication for Machining Inconel 718. Journal of Manufacturing Science and Engineering 143:5.
Crossref
Pradeep Krishnan G, Saravanan P, D. Samuel Raj, Shuhaib Hussain, Varun Ravi Shankar & Naveen Raj. (2021) Optimization of jet position and investigation of the effects of multijet MQCL during end milling of Ti-6Al-4V. Journal of Manufacturing Processes 64, pages 392-408.
Crossref
Subham Sarkar & Saurav Datta. (2020) Machining Performance of Inconel 718 Under Dry, MQL, and Nanofluid MQL Conditions: Application of Coconut Oil (Base Fluid) and Multi-walled Carbon Nanotubes as Additives. Arabian Journal for Science and Engineering 46:3, pages 2371-2395.
Crossref
Prassan Shah, Prathamesh Bhat & Navneet Khanna. (2021) Life cycle assessment of drilling Inconel 718 using cryogenic cutting fluids while considering sustainability parameters. Sustainable Energy Technologies and Assessments 43, pages 100950.
Crossref
Chakaravarthy Ezilarasan, Meenaskshi Sundaram Nagaraj, A. John Presin Kumar, A. Velayudham & Rishab Betala. (2021) Experimental analysis of process parameters in drilling nimonic C263 alloy under nano fluid mixed MQL environment. Manufacturing Review 8, pages 2.
Crossref
Youssef Alammari, Ivan Iovkov, Jannis Saelzer, Tobias Wolf & Dirk Biermann. (2021) Adhesion of Inconel 718 on Uncoated Tungsten Carbide Inserts in Interrupted Orthogonal Machining under MQL. Procedia CIRP 103, pages 194-199.
Crossref
Anuj Sharma & Rajesh Kumar. (2021) Potential use of minimum quantity lubrication (MQL) in machining of biocompatible materials using environment friendly cutting fluids: An overview. Materials Today: Proceedings 45, pages 5315-5319.
Crossref
M Amrita & B Kamesh. (2021) Optimization of graphene based minimum quantity lubrication of Inconel718 turning with multiple machining performances. Materials Today: Proceedings 39, pages 1337-1344.
Crossref
Kshitij Pandey & Saurav Datta. 2021. Sustainable Manufacturing and Design. Sustainable Manufacturing and Design 151 197 .
Binayak Sen, Mozammel Mia, G. M. Krolczyk, Uttam Kumar Mandal & Sankar Prasad Mondal. (2019) Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology 8:1, pages 249-280.
Crossref
Erween Abd Rahim, Kamaruddin Kamdani, Chong Joon Yew, Zazuli Mohid, Mohd Rasidi Ibrahim, Chew Kong Wong & Afiff Latif. 2021. Recent Trends in Manufacturing and Materials Towards Industry 4.0. Recent Trends in Manufacturing and Materials Towards Industry 4.0 319 328 .
Kamaruddin Kamdani, Ng How Jieh, Erween Abd Rahim, Zazuli Mohid, Noor Hakim Rafai, Chew Kong Wong & Afiff Latif. 2021. Recent Trends in Manufacturing and Materials Towards Industry 4.0. Recent Trends in Manufacturing and Materials Towards Industry 4.0 311 318 .
Erween Abd Rahim, Kamaruddin Kamdani, Rajinder Singh, Zazuli Mohid, Chew Kong Wong & Afiff Latif. 2021. Recent Trends in Manufacturing and Materials Towards Industry 4.0. Recent Trends in Manufacturing and Materials Towards Industry 4.0 289 298 .
Siti Nur Qamarina Ahmad Jumali, Zaidi Embong, Erween Abd Rahim, Zazuli Mohid & Syahrullail Samion. 2021. Recent Trends in Manufacturing and Materials Towards Industry 4.0. Recent Trends in Manufacturing and Materials Towards Industry 4.0 257 266 .
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh & Ajay Kumar. 2021. Advances in Production and Industrial Engineering. Advances in Production and Industrial Engineering 161 176 .
Gaurav Gaurav, Abhay Sharma, G.S. Dangayach & M.L. Meena. (2020) Assessment of jojoba as a pure and nano-fluid base oil in minimum quantity lubrication (MQL) hard-turning of Ti–6Al–4V: A step towards sustainable machining. Journal of Cleaner Production 272, pages 122553.
Crossref
G. Manimaran & K. Nimel Sworna Ross. (2020) Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool. Journal of Testing and Evaluation 48:4, pages 20180130.
Crossref
Gurraj Singh, Munish Kumar Gupta, Hussein Hegab, Aqib Mashood Khan, Qinghua Song, Zhanqiang Liu, Mozammel Mia, Muhammed Jamil, Vishal S. Sharma, Murat Sarikaya & Catalin Iulian Pruncu. (2020) Progress for sustainability in the mist assisted cooling techniques: a critical review. The International Journal of Advanced Manufacturing Technology 109:1-2, pages 345-376.
Crossref
K. Venkatesan, S. Devendiran, D. Sachin & J. Swaraj. (2020) Investigation of machinability characteristics and comparative analysis under different machining conditions for sustainable manufacturing. Measurement 154, pages 107425.
Crossref
Xiufang Bai, Fengmin Zhou, Changhe Li, Lan Dong, Xiaojie Lv & Qingan Yin. (2020) Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling. The International Journal of Advanced Manufacturing Technology 106:9-10, pages 4143-4155.
Crossref
Vasim A Shaikh & Nourredine Boubekri. (2020) Using Vegetable-Oil-Based Sustainable Metal Working Fluids to Promote Green Manufacturing. International Journal of Manufacturing, Materials, and Mechanical Engineering 10:1, pages 1-19.
Crossref
Changhe Li & Hafiz Muhammad Ali. 2020. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding 275 297 .
Changhe Li & Hafiz Muhammad Ali. 2020. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding 249 274 .
Changhe Li & Hafiz Muhammad Ali. 2020. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding. Enhanced Heat Transfer Mechanism of Nanofluid MQL Cooling Grinding 160 181 .
Yusuf Karabulut & Yusuf Kaynak. (2020) Drilling process and resulting surface properties of Inconel 718 alloy fabricated by Selective Laser Melting Additive Manufacturing. Procedia CIRP 87, pages 355-359.
Crossref
Zafar Said, Munish Gupta, Hussien Hegab, Neeti Arora, Aqib Mashood Khan, Muhammad Jamil & Evangelos Bellos. (2019) A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 2057-2086.
Crossref
Milon Selvam Dennison, Sivaram N M, Debabrata Barik & Senthil Ponnusamy. (2019) Turning operation of AISI 4340 steel in flooded, near-dry and dry conditions: a comparative study on tool-work interface temperature. Mechanics and Mechanical Engineering 23:1, pages 172-182.
Crossref
Cheng Yin, Lida Heng, Jeong Kim, Min Kim & Sang Mun. (2019) Development of a New Ecological Magnetic Abrasive Tool for Finishing Bio-Wire Material. Materials 12:5, pages 714.
Crossref
Ming Li, Tianbiao Yu, Lin Yang, Hongyu Li, Rongchuang Zhang & Wanshan Wang. (2019) Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid. Journal of Cleaner Production 209, pages 1508-1522.
Crossref
Amiril Sahab Abdul Sani, Erween Abd Rahim, Safian Sharif & Hiroyuki Sasahara. (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International 129, pages 347-362.
Crossref
K. Nimel Sworna Ross & G. Manimaran. (2019) Effect of cryogenic coolant on machinability of difficult-to-machine Ni–Cr alloy using PVD-TiAlN coated WC tool. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:1.
Crossref
Ningxia Yin, Guanghui Li, Guangyu Tan, Can Shen & Jiao Xue. (2018) Design of the Feed Liquid System for an Internal Cooling End-milling. Journal of Physics: Conference Series 1064, pages 012061.
Crossref
Erween Abd Rahim & Hemarani Dorairaju. (2018) Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining. Measurement 123, pages 213-225.
Crossref
SELVAM DENNISON MILON & MEJI M. ABISHA. (2018) A COMPARATIVE STUDY ON THE SURFACE FINISH ACHIEVED DURING FACE MILLING OF AISI 1045 STEEL COMPONENTS. i-manager's Journal on Mechanical Engineering 8:2, pages 18.
Crossref
Dipesh B. Trivedi, Ankit Kumar & Suhas S. Joshi. (2018) Drilling of Titanium Alloy using Heat Sink-based Ice Water Cooling. Procedia Manufacturing 26, pages 633-644.
Crossref
Dipesh B Trivedi, Ankit Kumar & Suhas S Joshi. (2018) Surface integrity analysis in Heat Sink-based Dry Drilling of Titanium Alloy. Materials Today: Proceedings 5:9, pages 19529-19538.
Crossref
Soumikh Roy, Ramanuj Kumar, Anurag, Amlana Panda & Rabin Kumar Das. (2018) A Brief Review on Machining of Inconel 718. Materials Today: Proceedings 5:9, pages 18664-18673.
Crossref
Necati Uçak & Adem Çiçek. (2018) The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills. Journal of Manufacturing Processes 31, pages 662-673.
Crossref
Çağrı Vakkas Yıldırım, Turgay Kıvak, Murat Sarıkaya & Fehmi Erzincanlı. (2017) Determination of MQL Parameters Contributing to Sustainable Machining in the Milling of Nickel-Base Superalloy Waspaloy. Arabian Journal for Science and Engineering 42:11, pages 4667-4681.
Crossref
Dongzhou Jia, Changhe Li, Yanbin Zhang, Min Yang, Yaogang Wang, Shuming Guo & Huajun Cao. (2017) Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids. Precision Engineering 50, pages 248-262.
Crossref
SELVAM MILON D.SIVARAM N.M.. (2017) THE EFFECTIVENESS OF VARIOUS CUTTING FLUIDS ON THE SURFACE ROUGHNESS OF AISI 1045 STEEL DURING TURNING OPERATION USING MINIMUM QUANTITY LUBRICATION SYSTEM. i-manager’s Journal on Future Engineering and Technology 13:1, pages 36.
Crossref
Erween Abd Rahim & Hiroyuki Sasahara. (2017) Performance of palm oil as a biobased machining lubricant when drilling inconel 718. MATEC Web of Conferences 101, pages 03015.
Crossref
Shuming Guo, Changhe Li, Yanbin Zhang, Yaogang Wang, Benkai Li, Min Yang, Xianpeng Zhang & Guotao Liu. (2017) Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy. Journal of Cleaner Production 140, pages 1060-1076.
Crossref
Yanbin Zhang, Changhe Li, Min Yang, Dongzhou Jia, Yaogang Wang, Benkai Li, Yali Hou, Naiqing Zhang & Qidong Wu. (2016) Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil. Journal of Cleaner Production 139, pages 685-705.
Crossref
Benkai Li, Changhe Li, Yanbin Zhang, Yaogang Wang, Dongzhou Jia & Min Yang. (2016) Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil. Chinese Journal of Aeronautics 29:4, pages 1084-1095.
Crossref
Yaogang Wang, Changhe Li, Yanbin Zhang, Benkai Li, Min Yang, Xianpeng Zhang, Shuming Guo & Guotao Liu. (2016) Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids. Tribology International 99, pages 198-210.
Crossref
Anuj Kumar Sharma, Arun Kumar Tiwari & Amit Rai Dixit. (2016) Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. Journal of Cleaner Production 127, pages 1-18.
Crossref
Yaogang Wang, Changhe Li, Yanbin Zhang, Min Yang, Benkai Li, Dongzhou Jia, Yali Hou & Cong Mao. (2016) Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils. Journal of Cleaner Production 127, pages 487-499.
Crossref
Yanbin Zhang, Changhe Li, Dongzhou Jia, Benkai Li, Yaogang Wang, Min Yang, Yali Hou & Xiaowei Zhang. (2016) Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. Journal of Materials Processing Technology 232, pages 100-115.
Crossref
N. Talib & E.A. Rahim. (2016) The Effect of Tribology Behavior on Machining Performances When Using Bio-based Lubricant as a Sustainable Metalworking Fluid. Procedia CIRP 40, pages 504-508.
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Yanbin Zhang, Changhe Li, Dongzhou Jia, Dongkun Zhang & Xiaowei Zhang. (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. International Journal of Machine Tools and Manufacture 99, pages 19-33.
Crossref
Yanbin Zhang, Changhe Li, Dongzhou Jia, Dongkun Zhang & Xiaowei Zhang. (2015) Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. Journal of Cleaner Production 87, pages 930-940.
Crossref
Ali Riza Motorcu, Abdil Kuş & İsmail Durgun. (2014) The evaluation of the effects of control factors on surface roughness in the drilling of Waspaloy superalloy. Measurement 58, pages 394-408.
Crossref
Norfazillah Talib & Erween Abdul Rahim. (2014) The Performance of Modified Jatropha-Oil Based Trimethylolpropane (TMP) Ester on Tribology Characteristic for Sustainable Metalworking Fluids (MWFs). Applied Mechanics and Materials 660, pages 357-361.
Crossref
Nicolas Beer, Ekrem Özkaya & Dirk Biermann. (2014) Drilling of Inconel 718 with Geometry-modified Twist Drills. Procedia CIRP 24, pages 49-55.
Crossref
Muhamad Nasir Murad, Safian Sharif, E.A. Rahim & Rival. (2013) Effect of Drill Point Angle on Surface Integrity when Drilling Titanium Alloy. Advanced Materials Research 845, pages 966-970.
Crossref
N.A.H. Jasni & Mohd Amri Lajis. (2013) Surface Topography in Machining of AISI D2 Hardened Steel. Applied Mechanics and Materials 315, pages 660-664.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.