Citations (38)
Keep up to date with the latest research on this topic with citation updates for this article.
Articles from other publishers (38)
Zhenmin LI, Qinghua SONG, Peijian JIN, Zhanqiang LIU, Bing WANG & Haifeng MA. (2023) Chatter suppression techniques in milling processes: A state of the art review. Chinese Journal of Aeronautics.
Crossref
Crossref
Xingjian Dong, Guowei Tu, Lan Hu & Zhike Peng. (2023) Suppress chatter in milling of thin-walled parts via fixture with active support. Journal of Vibration and Control, pages 107754632311613.
Crossref
Crossref
Junming Hou, Zhengcai Zhao, Yucan Fu & Baosheng Wang. (2023) Improvement in Machining Stability of Thin-Walled Blades by Tension. Journal of Vibration Engineering & Technologies.
Crossref
Crossref
Zhenmin Li, Qinghua Song, Zhanqiang Liu, Bing Wang & Yukui Cai. (2022) Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics. The International Journal of Advanced Manufacturing Technology 122:7-8, pages 3041-3055.
Crossref
Crossref
Xinfeng Dong, Xinhang Shen & Zhifang Fu. (2021) Stability analysis in turning with variable spindle speed based on the reconstructed semi-discretization method. The International Journal of Advanced Manufacturing Technology 117:11-12, pages 3393-3403.
Crossref
Crossref
Ge Wu, Guangxian Li, Wencheng Pan, Izamshah Raja, Xu Wang & Songlin Ding. (2021) A state-of-art review on chatter and geometric errors in thin-wall machining processes. Journal of Manufacturing Processes 68, pages 454-480.
Crossref
Crossref
Junming Hou, Zhengcai Zhao, Yucan Fu & Ning Qian. (2021) Machining stability enhancement in multi-axis milling of titanium hollow blade by introducing multiple damping and rigid supporters. Journal of Manufacturing Processes 64, pages 198-208.
Crossref
Crossref
Shujie Lv & Yang Zhao. (2021) Stability of Milling Process with Variable Spindle Speed Using Runge–Kutta-Based Complete Method. Mathematical Problems in Engineering 2021, pages 1-10.
Crossref
Crossref
Hao Liu & Yufeng Zhou. (2020) Review of research on chatter stability in milling of thin-walled parts. Review of research on chatter stability in milling of thin-walled parts.
Le Cao, Tao Huang, Da-Ming Shi, Xiao-Ming Zhang & Han Ding. (2020) Active Chatter Suppression in Low Immersion Intermittent Milling Process. Journal of Manufacturing Science and Engineering 142:10.
Crossref
Crossref
Jonas Baumann, Andreas Wirtz, Tobias Siebrecht & Dirk Biermann. (2020) Disturbance of the Regenerative Effect by Use of Milling Tools Modified with Asymmetric Dynamic Properties. Journal of Manufacturing and Materials Processing 4:3, pages 67.
Crossref
Crossref
Yun Huang, Shui He, Guijian Xiao, Wei Li, Suolang Jiahua & Wenxi Wang. (2020) Effects research on theoretical-modelling based suppression of the contact flutter in blisk belt grinding. Journal of Manufacturing Processes 54, pages 309-317.
Crossref
Crossref
Xinfeng Dong & Weimin Zhang. (2019) Chatter suppression analysis in milling process with variable spindle speed based on the reconstructed semi-discretization method. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 2021-2037.
Crossref
Crossref
Caixu YUE, Haining GAO, Xianli LIU, Steven Y. LIANG & Lihui WANG. (2019) A review of chatter vibration research in milling. Chinese Journal of Aeronautics 32:2, pages 215-242.
Crossref
Crossref
Chenxi Wang, Xingwu Zhang, Ruqiang Yan, Xuefeng Chen & Hongrui Cao. (2019) Multi harmonic spindle speed variation for milling chatter suppression and parameters optimization. Precision Engineering 55, pages 268-274.
Crossref
Crossref
Edouard Rivière-Lorphèvre, Hoai Nam Huynh & Olivier Verlinden. (2018) Influence of the time step selection on dynamic simulation of milling operation. The International Journal of Advanced Manufacturing Technology 95:9-12, pages 4497-4512.
Crossref
Crossref
O. O. Shtehin, V. Wagner, S. Seguy, Y. Landon, G. Dessein & M. Mousseigne. (2016) Stability of ball-end milling on warped surface: semi-analytical and experimental analysis. The International Journal of Advanced Manufacturing Technology 89:9-12, pages 2557-2569.
Crossref
Crossref
Yuxin Sun & Zhenhua Xiong. (2017) High-order full-discretization method using Lagrange interpolation for stability analysis of turning processes with stiffness variation. Journal of Sound and Vibration 386, pages 50-64.
Crossref
Crossref
Jinbo Niu, Ye DingLiMin Zhu & Han Ding. (2016) Stability Analysis of Milling Processes With Periodic Spindle Speed Variation Via the Variable-Step Numerical Integration Method. Journal of Manufacturing Science and Engineering 138:11.
Crossref
Crossref
Yue Wu, Hai-Tao Zhang, Tao Huang, Huan Zhao & Han Ding. (2016) Adaptive chatter mitigation control for machining processes with input saturations. International Journal of Robust and Nonlinear Control 26:14, pages 3088-3100.
Crossref
Crossref
A. Ya. Krasil?nikov & K. Yu. Kravchenko. (2016) Determining the stability regions in end milling. Russian Engineering Research 36:4, pages 294-299.
Crossref
Crossref
Qinghua Song, Jiahao Shi, Zhanqiang Liu, Yi Wan & Feng Xia. (2015) Boring bar with constrained layer damper for improving process stability. The International Journal of Advanced Manufacturing Technology 83:9-12, pages 1951-1966.
Crossref
Crossref
Amir Mahyar Khorasani, Ian Gibson, Moshe Goldberg, Egan H. Doeven & Guy Littlefair. (2016) Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083). Measurement 82, pages 55-63.
Crossref
Crossref
Ye Ding, Jinbo Niu, LiMin Zhu & Han Ding. (2016) Numerical Integration Method for Stability Analysis of Milling With Variable Spindle Speeds. Journal of Vibration and Acoustics 138:1.
Crossref
Crossref
Mehmet Alper Sofuoglu & Sezan Orak. (2015) A hybrid decision making approach to prevent chatter vibrations. Applied Soft Computing 37, pages 180-195.
Crossref
Crossref
Satoshi Fukagawa, Hiroshi Fujimoto, Yuki Terada & Shinji Ishii. (2015) Experimental verification of chatter suppression in end milling process using cooperative control of spindle and stage motors. Experimental verification of chatter suppression in end milling process using cooperative control of spindle and stage motors.
E. Gourc, S. Seguy, G. Michon, A. Berlioz & B.P. Mann. (2015) Quenching chatter instability in turning process with a vibro-impact nonlinear energy sink. Journal of Sound and Vibration 355, pages 392-406.
Crossref
Crossref
Chang-Ho Lee, Min-Yang Yang, Chang-Won Oh, Tae-Weon Gim & Jae-Yong Ha. (2015) An integrated prediction model including the cutting process for virtual product development of machine tools. International Journal of Machine Tools and Manufacture 90, pages 29-43.
Crossref
Crossref
Sébastien Seguy, Lionel Arnaud & Tamás Insperger. (2014) Chatter in interrupted turning with geometrical defects: an industrial case study. The International Journal of Advanced Manufacturing Technology 75:1-4, pages 45-56.
Crossref
Crossref
Teruaki Ishibashi, Hiroshi Fujimoto, Shinji Ishii, Kouji Yamamoto & Yuki Terada. (2014) High-frequency-variation speed control of spindle motor for chatter vibration suppression in NC machine tools. High-frequency-variation speed control of spindle motor for chatter vibration suppression in NC machine tools.
Qinghua Song, Ganggang Ju, Zhanqiang Liu & Xing Ai. (2014) Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process. International Journal of Mechanical Sciences 83, pages 172-183.
Crossref
Crossref
Pankaj Wahi. (2014) Stability and bifurcation studies of delayed systems with variable delays using Galerkin projections. International Journal of Dynamics and Control 2:2, pages 221-233.
Crossref
Crossref
Xu Zhou, Dinghua Zhang, Ming Luo & Baohai Wu. (2014) Toolpath dependent chatter suppression in multi-axis milling of hollow fan blades with ball-end cutter. The International Journal of Advanced Manufacturing Technology 72:5-8, pages 643-651.
Crossref
Crossref
Teruaki Ishibashi & Hiroshi Fujimoto. (2013) Force sensorless control of cutting resistance for NC machine tools by spindle motor control using variable pulse number T-method. Force sensorless control of cutting resistance for NC machine tools by spindle motor control using variable pulse number T-method.
Etienne Gourc, Sébastien Seguy, Guilhem Michon & Alain Berlioz. (2013) Chatter Control in Turning Process with a Nonlinear Energy Sink. Advanced Materials Research 698, pages 89-98.
Crossref
Crossref
M. Mousseigne, Y. Landon, S. Seguy, G. Dessein & J.M. Redonnet. (2013) Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. International Journal of Machine Tools and Manufacture 65, pages 47-57.
Crossref
Crossref
Etienne Gourc, S?bastien Seguy, Guilhem Michon & Alain Berlioz. (2012) Delayed dynamical sytem strongly coupled to a nonlinear energy sink : application to machining chatter. MATEC Web of Conferences 1, pages 05002.
Crossref
Crossref
Etienne Gourc, Sébastien Seguy & Lionel Arnaud. (2011) Chatter milling modeling of active magnetic bearing spindle in high-speed domain. International Journal of Machine Tools and Manufacture 51:12, pages 928-936.
Crossref
Crossref