Citations (50)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
P M Abhilash & D. Chakradhar. (2022) Effect of wire material and discharge energy on productivity and surface integrity of WEDM-processed Inconel 718. Advances in Materials and Processing Technologies 8:4, pages 4698-4719.
Read now
Read now
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, Sriteja Salike, Venkat Phani Kumar Pasunuri & N.S. Reddy. (2022) Estimation of machinability performance in wire-EDM on titanium alloy using neural networks. Materials and Manufacturing Processes 37:9, pages 1073-1084.
Read now
Read now
Md Shamim Shah & Probir Saha. (2021) Investigation on performance characteristics of micro-EDM dressing for the fabrication of micro-rod(s) on Ti-6Al-7Nb biomedical material. Machining Science and Technology 25:3, pages 398-421.
Read now
Read now
Rashi Tyagi, Nitish Kumar Mahto, Alok Kumar Das & Amitava Mandal. (2020) Preparation of MoS2+Cu coating through the EDC process and its analysis. Surface Engineering 36:1, pages 86-93.
Read now
Read now
Aishwarya Payla, Kunal Chopra & Eswara Krishna Mussada. (2019) Investigations on power consumption in WEDM of EN31 steel for sustainable production. Materials and Manufacturing Processes 34:16, pages 1855-1865.
Read now
Read now
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh Shafaroud. (2019) Theoretical and experimental analysis of machining errors on small arced corners during WEDM finishing stages. Machining Science and Technology 23:5, pages 734-757.
Read now
Read now
Rashi Tyagi, Kshitij Pandey, Alok Kumar Das & Amitava Mandal. (2019) Deposition of hBN+Cu layer through electrical discharge process using green compact electrode. Materials and Manufacturing Processes 34:9, pages 1035-1048.
Read now
Read now
Naveed Ahmed, Kashif Ishfaq, Khaja Moiduddin, Rafaqat Ali & Naif Al-Shammary. (2019) Machinability of titanium alloy through electric discharge machining. Materials and Manufacturing Processes 34:1, pages 93-102.
Read now
Read now
Somvir Singh Nain, Dixit Garg & Sanjeev Kumar. (2018) Performance evaluation of the WEDM process of aeronautics super alloy. Materials and Manufacturing Processes 33:16, pages 1793-1808.
Read now
Read now
Bülent Ekmekci & Emre Güngör. (2017) A comparative study on the wear resistance of electrical discharge machined surfaces. Machining Science and Technology 21:4, pages 632-650.
Read now
Read now
Articles from other publishers (40)
Muhammad Umar Farooq, Saqib Anwar, Muhammad Asad Ali, Abual Hassan & Ray Tahir Mushtaq. (2023) Exploring wide-parametric range for tool electrode selection based on surface characterization and machining rate employing powder-mixed electric discharge machining process for Ti6Al4V ELI. The International Journal of Advanced Manufacturing Technology 129:5-6, pages 2823-2841.
Crossref
Crossref
M. Altin Karataş & M.A. Biberci. (2022) Statistical Analysis of WEDM Machining Parameters of Ti-6Al-4V Alloy Using Taguchi-Based Grey Relational Analysis and Artificial Neural Network. Experimental Techniques 47:4, pages 851-870.
Crossref
Crossref
Ram SaiJanaJana, Jeavudeen Shiek & Shaul SyedHameedHameed. (2023) Multi-response optimization of PMEDM on Inconel 718 using hybrid T-GRA, TOPSIS, and ANN model. FME Transactions 51:4, pages 564-574.
Crossref
Crossref
Dheeraj Mathew Paulson, Mohd Saif & Mohd Zishan. (2023) Optimization of wire-EDM process of titanium alloy-Grade 5 using Taguchi’s method and grey relational analysis. Materials Today: Proceedings 72, pages 144-153.
Crossref
Crossref
Anitesh Kumar Singh, Kalinga Simant Bal, Dipanjan Dey, Abhishek Rudra Pal, Dilip Kumar Pratihar & Asimava Roy Choudhury. 2023. Advances in Modern Machining Processes. Advances in Modern Machining Processes
243
255
.
Durgesh Pandey, Rajesh Babbar, Aviral Misra & R. K. Bansal. 2023. Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Advances in Modelling and Optimization of Manufacturing and Industrial Systems
487
500
.
Lijun Liu, Muthuramalingam Thangaraj, Panagiotis Karmiris-Obratański, Yuanhua Zhou, Ramamurthy Annamalai, Ryszard Machnik, Ammar Elsheikh & Angelos P. Markopoulos. (2022) Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique. Coatings 12:11, pages 1612.
Crossref
Crossref
Sanjeev Kumar Garg, Alakesh Manna & Ajai Jain. (2021) Investigation and Analysis of Surface Veracity and Parametric Aspects During $${\textit{Wire}}_{{\textit{EDM}}}$$ of $$\textit{Al}/\textit{ZrO}_{2(p)}$$-Metal Matrix Composite. Arabian Journal for Science and Engineering 47:7, pages 8417-8438.
Crossref
Crossref
Kashif Ishfaq, Muhammad Asad Maqsood, Saqib Anwar, Muhammad Harris, Abdullah Alfaify & Abdul Wasy Zia. (2022) EDM of Ti6Al4V under nano-graphene mixed dielectric: a detailed roughness analysis. The International Journal of Advanced Manufacturing Technology 120:11-12, pages 7375-7388.
Crossref
Crossref
N. Rajesh Jesudoss Hynes, D. S. Samuvel Prem Kumar, M. Vivek Prabhu, Muhammad Asad Ali, Muhammad Huzaifa Raza & Catalin I. Pruncu. (2022) Investigating the parametric effects on wire electric discharge machining performance in processing AA1050-5 wt.% SiC composite with zinc-coated brass wire. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:4.
Crossref
Crossref
P. M. Abhilash & D. Chakradhar. (2021) Machine-vision-based electrode wear analysis for closed loop wire EDM process control. Advances in Manufacturing 10:1, pages 131-142.
Crossref
Crossref
Anshuman Kumar & Chandramani Upadhyay. (2021) Experimental investigation and optimization of machining performance characteristics during WEDM of inconel 718: On evaluation of wire electrodes and advanced parameter techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:3, pages 1645-1665.
Crossref
Crossref
P. Bharathi, G. Srinivasarao & P. Gopalakrishnaiah. (2021) Multi-objective optimization in wire electric discharge machining of Ti–6AL–4v using grey relational analysis for square and circular profiles. International Journal of Modeling, Simulation, and Scientific Computing 13:01.
Crossref
Crossref
Shoufa Liu, Muthuramalingam Thangaraj, Khaja Moiduddin & Abdulrahman M. Al-Ahmari. (2022) Influence of Adaptive Gap Control Mechanism and Tool Electrodes on Machining Titanium (Ti-6Al-4V) Alloy in EDM Process. Materials 15:2, pages 513.
Crossref
Crossref
Sanjeev Kr. Garg, Alakesh Manna & Ajai Jain. 2022. Advanced Composites in Aerospace Engineering Applications. Advanced Composites in Aerospace Engineering Applications
195
223
.
P.M. Abhilash & D. Chakradhar. (2021) Failure detection and control for wire EDM process using multiple sensors. CIRP Journal of Manufacturing Science and Technology 33, pages 315-326.
Crossref
Crossref
Sarmad Ali Khan, Muhammad Usman, Salman Pervaiz, Muhammad Qaiser Saleem & Rakhshanda Naveed. (2021) Exploring the feasibility of novel coated wires in wire EDM of Ti-6Al-4 V aerospace alloy: a case of multi-pass strategy. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:5.
Crossref
Crossref
G. Britto Joseph, G. Charan Krishna, K.D. Vidya Sagar, R.B. Durai Raj, Jeya Jeevahan & V. Sriram. (2021) Optimization and parametric analysis of Titanium Grade 2 in EDM using graphite tool as an electrode. Materials Today: Proceedings 47, pages 4735-4740.
Crossref
Crossref
Sanjeev Kumar Garg, Alakesh Manna & Ajai Jain. 2021. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering
687
697
.
Lanrong Cai, Min Li, Junling Zhao & Dongmei Chang. (2020) Experimental research on powder-mixed near-dry electrical discharge surface modification of Ti-6Al-4V titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:13, pages 1573-1579.
Crossref
Crossref
Deepak Sharma, Shalini Mohanty & Alok Kumar Das. (2020) Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining. Surface and Coatings Technology 381, pages 125157.
Crossref
Crossref
T. Muthuramalingam, L. Ganesh Babu, K. Sridharan, T. Geethapriyan & K. P. Srinivasan. 2020. Advances in Engineering Research and Application. Advances in Engineering Research and Application
487
492
.
T. Muthuramalingam, S. Vasanth, L. Ganesh Babu, D. Saravanakumar & P. Karthikeyan. (2019) Flushing Pressure Automation for Efficient Machining in EDM Process. Flushing Pressure Automation for Efficient Machining in EDM Process.
T. Muthuramalingam. (2019) Effect of diluted dielectric medium on spark energy in green EDM process using TGRA approach. Journal of Cleaner Production 238, pages 117894.
Crossref
Crossref
Tina Chaudhary, Arindam Kumar Chanda, Arshad Noor Siddiquee & Namrata Gangil. (2019) Effect of different dielectric fluids on material removal rate, surface roughness, kerf width and microhardness. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:8.
Crossref
Crossref
Ramezan Ali Mahdavinejad & Mohsen Asghari Ilani. (2019) Superior advance research in the electro-discharge machining of Ti alloys: Review. International Journal of Scientific Research in Mechanical and Materials Engineering, pages 19-38.
Crossref
Crossref
Jiaofei Huo, Shoufa Liu, Yinwei Wang, T Muthuramalingam & Vu Ngoc Pi. (2019) Influence of process factors on surface measures on electrical discharge machined stainless steel using TOPSIS. Materials Research Express 6:8, pages 086507.
Crossref
Crossref
Rakesh Chaudhari, Jay J. Vora, S. S. Mani Prabu, I. A. Palani, Vivek K. Patel, D. M. Parikh & Luis Norberto López de Lacalle. (2019) Multi-Response Optimization of WEDM Process Parameters for Machining of Superelastic Nitinol Shape-Memory Alloy Using a Heat-Transfer Search Algorithm. Materials 12:8, pages 1277.
Crossref
Crossref
Thrinadh Jadam, Saurav Datta & Manoj Masanta. (2019) Study of surface integrity and machining performance during main/rough cut and trim/finish cut mode of WEDM on Ti–6Al–4V: effects of wire material. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:3.
Crossref
Crossref
Ashish Kumar Srivastava, Akash Nag, Amit Rai Dixit, Sergej Hloch, Sandeep Tiwari, Jiri Scucka & Praveen Pachauri. (2019)
Surface integrity in wire-EDM tangential turning of
in situ
hybrid metal matrix composite A359/B
4
C/Al
2
O
3
. Science and Engineering of Composite Materials 26:1, pages 122-133.
Crossref
Crossref
Hamid Abyar, Amir Abdullah & Abdolhamid Akbarzadeh. (2019) Prediction Algorithm for WEDM Arced Path Errors Based on Spark Variable Gap and Nonuniform Spark Distribution Models. Journal of Manufacturing Science and Engineering 141:1.
Crossref
Crossref
Praveen Patnaik, Saurav Datta & Siba Sankar Mahapatra. (2019) WEDM Performance of Ti-6Al-4V: Emphasis on Multi-Cut Strategy, Effects of Electrode Wire. Materials Today: Proceedings 18, pages 4102-4110.
Crossref
Crossref
A. Ramamurthy & T. Muthuramalingam. 2019. Advances in Manufacturing Processes. Advances in Manufacturing Processes
279
285
.
T. Muthuramalingam. 2019. Micro and Nano Machining of Engineering Materials. Micro and Nano Machining of Engineering Materials
3
8
.
Rakhshanda Naveed & Nadeem Ahmad Mufti. (2018) Electric Discharge Machining of Tungsten Carbide using Uncoated and Coated Wire Electrodes: Analysis of Cutting Speed and Workpiece Geometrical Accuracy. IOP Conference Series: Materials Science and Engineering 409, pages 012024.
Crossref
Crossref
T Muthuramalingam, A Ramamurthy, K Sridharan & S Ashwin. (2018) Analysis of surface performance measures on WEDM processed titanium alloy with coated electrodes. Materials Research Express 5:12, pages 126503.
Crossref
Crossref
T Geethapriyan, K Kalaichelvan, T Muthuramalingam & A Rajadurai. (2016) Performance analysis of process parameters on machining α–β titanium alloy in electrochemical micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:9, pages 1577-1589.
Crossref
Crossref
Anshuman Kumar, Kumar Abhishek, K.Vivekananda & KP. Maity. (2018) Effect of wire electrode materials on die-corner accuracy for Wire Electrical Discharge Machining (WEDM) of Inconel 718. Materials Today: Proceedings 5:5, pages 12641-12648.
Crossref
Crossref
H. Majumder, T.R. Paul, V. Dey, P. Dutta & A. Saha. (2017) Use of PCA-grey analysis and RSM to model cutting time and surface finish of Inconel 800 during wire electro discharge cutting. Measurement 107, pages 19-30.
Crossref
Crossref
Yan Wang, Duxing He, Lin Yang & Wei Xiong. (2017) Formation mechanism of surface topography in low-speed wire electrical discharge machining Inconel 718 and its on-line prediction based on acoustic emission technology. Advances in Mechanical Engineering 9:4, pages 168781401769457.
Crossref
Crossref