Citations (28)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
A. Kiran Kumar & P. Venkataramaiah. (2022) Experimental investigation on surface integrity of Inconel 718 under hot machining and optimisation of its process parameters. Advances in Materials and Processing Technologies 8:2, pages 1509-1521.
Read now
Read now
Gurpreet Singh, Vivek Aggarwal & Sehijpal Singh. (2021) Experimental investigations into machining performance of Hastelloy C-276 in different cooling environments. Materials and Manufacturing Processes 36:15, pages 1789-1799.
Read now
Read now
Farshid Jafarian. (2020) Electro discharge machining of Inconel 718 alloy and process optimization. Materials and Manufacturing Processes 35:1, pages 95-103.
Read now
Read now
Aref Saliminia & Mohammad Mahdi Abootorabi. (2019) Experimental investigation of surface roughness and cutting ratio in a spraying cryogenic turning process. Machining Science and Technology 23:5, pages 779-793.
Read now
Read now
Articles from other publishers (24)
Ganesh S. Kadam & Raju Shrihari Pawade. 2023. Manufacturing and Processing of Advanced Materials. Manufacturing and Processing of Advanced Materials
102
113
.
Vincent Wagner. (2023) State of the art of research studies on machining processes by French research network Manufacturing’21. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Xiaotian Zhang, Changhe Li, Zongming Zhou, Bo Liu, Yanbin Zhang, Min Yang, Teng Gao, Mingzheng Liu, Naiqing Zhang, Zafar Said, Shubham Sharma & Hafiz Muhammad Ali. (2023) Vegetable Oil-Based Nanolubricants in Machining: From Physicochemical Properties to Application. Chinese Journal of Mechanical Engineering 36:1.
Crossref
Crossref
Guénaël Germain, Yessine Ayed, Bruno Lavisse & Tanguy Cadoux. (2023) Machining assistance techniques: impact on tool wear and surface integrity on aeronautic alloys. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Thella Babu Rao. (2022) Prediction of EDMed micro-hole quality characteristics using hybrid bio-inspired machine learning-based predictive approaches. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 747-764.
Crossref
Crossref
Nitin Kumar Sahu, Mukesh Kumar Singh, Atul Kumar Sahu & Anoop Kumar Sahu. (2023) Employment of cylindrical electrolytic copper grade electrode under EDMed Inconel 825 super alloy: emphasis on machining behavior accompanied with surface topography for sustainability. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Levent UĞUR, Hakan KAZAN & Barış ÖZLÜ. (2022) Investigation of the Impacts of Cutting Parameters on Power Usage in Cryogenic-Assisted Turning of AISI 52100 Bearing Steel by FEMAISI 52100 Rulman Çeliğinin Kriyojenik Destekli Tornalama İşleminde Kesme Parametrelerinin Güç Tüketimi Üzerine Etkilerinin FEM ile İncelenmesi. İmalat Teknolojileri ve Uygulamaları 3:3, pages 55-61.
Crossref
Crossref
NITIN KUMAR SAHU, MUKESH KUMAR SINGH, ATUL KUMAR SAHU & ANOOP KUMAR SAHU. (2022) SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY. Surface Review and Letters 29:11.
Crossref
Crossref
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh & Balkar Singh. (2022) Sustainable machining of Hastelloy C-276 enabling minimum quantity lubrication of environmentally compatible lubricants. Journal of Cleaner Production 373, pages 133928.
Crossref
Crossref
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh, Balkar Singh, Shubham Sharma, Jujhar Singh, Changhe Li, R.A. Ilyas & Abdullah Mohamed. (2022) Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants. Materials 15:15, pages 5451.
Crossref
Crossref
Ribeiro-Carvalho Sílvia, C.H. Lauro, Horovistiz Ana & J.P. Davim. (2022) Development of FEM-based digital twins for machining difficult-to-cut materials: A roadmap for sustainability. Journal of Manufacturing Processes 75, pages 739-766.
Crossref
Crossref
Le Gong, Rachele Bertolini, Stefania Bruschi, Andrea Ghiotti & Ning He. (2021) Surface Integrity Evaluation When Turning Inconel 718 Alloy Using Sustainable Lubricating-Cooling Approaches. International Journal of Precision Engineering and Manufacturing-Green Technology 9:1, pages 25-42.
Crossref
Crossref
Ganesh S. Kadam & Raju S. Pawade. 2022. Recent Advances in Manufacturing Processes and Systems. Recent Advances in Manufacturing Processes and Systems
243
251
.
Andrea De Bartolomeis, Stephen T. Newman, Dirk Biermann & Alborz Shokrani. (2021) State-of-The-Art Cooling and Lubrication for Machining Inconel 718. Journal of Manufacturing Science and Engineering 143:5.
Crossref
Crossref
Haibo Liu, Chengxin Wang, Zhaohuan Liu, Kuo Liu, Shaowei Jiang & Yongqing Wang. (2021) Numerical prediction of machining-induced surface residual stress for TC4 cryogenic turning. The International Journal of Advanced Manufacturing Technology 114:1-2, pages 131-144.
Crossref
Crossref
Ibrahim Nouzil, Salman Pervaiz & Sathish Kannan. (2020) Role of jet radius and jet location in cryogenic machining of Inconel 718: a finite element method based approach. International Journal on Interactive Design and Manufacturing (IJIDeM) 15:1, pages 1-19.
Crossref
Crossref
Krishna Mohan Buddaraju, G. Ravi Kiran Sastry & Satyanarayana Kosaraju. (2021) A review on turning of Inconel alloys. Materials Today: Proceedings 44, pages 2645-2652.
Crossref
Crossref
J Kesavan & V Senthilkumar. (2020) Experimental investigations on cryo-machining of Hastelloy C-276 with tool wear characteristics. Sādhanā 45:1.
Crossref
Crossref
C. Chandrasekhara Sastry, M. Abeens, N. Pradeep & M. A. Muthu Manickam. (2020) Microstructural analysis, radiography, tool wear characterization, induced residual stress and corrosion behavior of conventional and cryogenic trepanning of DSS 2507. Journal of Mechanical Science and Technology 34:6, pages 2535-2547.
Crossref
Crossref
Navneet Khanna, Chetan Agrawal, Manu Dogra & Catalin Iulian Pruncu. (2020) Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique. Journal of Materials Research and Technology 9:3, pages 5794-5804.
Crossref
Crossref
Navneet Khanna, Chetan Agrawal, Munish Kumar Gupta & Qinghua Song. (2020) Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy. Tribology International 143, pages 106084.
Crossref
Crossref
Merugu Rakesh & Saurav Datta. (2020) Dry machining of Inconel 718 super alloys using uncoated tool: Experimental and numerical analysis. Matériaux & Techniques 108:4, pages 402.
Crossref
Crossref
C. Chandrasekhara Sastry, K. Gokulakrishnan, P. Hariharan, M. Pradeep Kumar & S. Rajendra Boopathy. (2019) Investigation of boring on gunmetal in dry, wet and cryogenic conditions. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:1.
Crossref
Crossref
S Dinesh, V Senthilkumar & P Asokan. (2019) Effect of cryogenic cooling on texture and microstructural evolution of ZK60 magnesium alloy during machining. Materials Research Express 6:9, pages 096587.
Crossref
Crossref