Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 23, 2019 - Issue 6
Submit an article Journal homepage
485
Views
37
CrossRef citations to date
0
Altmetric
Articles

Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing

Muhammad JamilCollege of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China;
,
Aqib Mashood KhanCollege of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China; Correspondence[email protected]
,
Ning HeCollege of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China;
,
Liang LiCollege of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China;
,
Asif IqbalFaculty of Integrated Technologies, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong BE, Brunei Darussalam;
&
Mozammel MiaMechanical and Production Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh
Pages 1022-1046 | Published online: 23 Sep 2019

Citations (37)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

M. Dhananchezian. (2022) A review on performance evaluation of liquid nitrogen as coolant in turning Ti-6Al-4V alloy. Machining Science and Technology 26:5, pages 701-857.
Read now
Zhiwei Lai, Chengyong Wang, Lijuan Zheng, Haisheng Lin, Yaohui Yuan, Jianzhang Yang & Weiqiang Xiong. (2020) Effect of cryogenic oils-on-water compared with cryogenic minimum quantity lubrication in finishing turning of 17-4PH stainless steel. Machining Science and Technology 24:6, pages 1016-1036.
Read now
P. Sivaiah & D. Chakradhar. (2020) Identifying the effectiveness of manner of cryogenic coolant supply in different cryogenic cooling techniques in turning process—a review. Machining Science and Technology 24:6, pages 948-999.
Read now

Articles from other publishers (34)

Munish Kumar Gupta, P. Niesłony, Mehmet Erdi Korkmaz, Mustafa Kuntoğlu, G. M. Królczyk, Mustafa Günay & Murat Sarikaya. (2023) Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies. International Journal of Precision Engineering and Manufacturing-Green Technology 10:6, pages 1393-1406.
Crossref
Pengwen Wang, Aqib Mashood Khan, Mohammed Alkahtani, Fahad Alasim, Muhammad Jamil & Ghulam Hussain. (2023) Introducing new green machining technology to enhance process performance and reduce environmental pollution in the metal processing industry. Environmental Science and Pollution Research 30:51, pages 111552-111569.
Crossref
Souâd Makhfi, Abdelhakim Dorbane, Fouzi Harrou & Ying Sun. (2023) Prediction of Cutting Forces in Hard Turning Process Using Machine Learning Methods: A Case Study. Journal of Materials Engineering and Performance.
Crossref
Yuhang Guo, Xiaojun Liu, Jiawei Ji, Zhaochang Wang, Xidong Hu, Yongqing Zhu, Tao Zhang, Tongtong Tao, Kun Liu & Yunlong Jiao. (2023) Delayed Leidenfrost Effect of a Cutting Droplet on a Microgrooved Tool Surface. Langmuir 39:28, pages 9648-9659.
Crossref
Harsh Salvi, Harsh Vesuwala, Parth Raval, Vishvesh Badheka & Navneet Khanna. (2023) Sustainability analysis of additive + subtractive manufacturing processes for Inconel 625. Sustainable Materials and Technologies 35, pages e00580.
Crossref
P. Sivaiah, D. Chakradhar & R. Ganesh Narayanan. 2023. Sustainable Manufacturing Processes. Sustainable Manufacturing Processes 113 154 .
Muhammad Sajid, Ahmad Wasim, Salman Hussain, Muhammad Huzaifa Raza & Mirza Jahanzaib. (2022) Application of set‐based concurrent engineering methodology to the development of cost modeling system for metal casting process. Systems Engineering.
Crossref
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh & Balkar Singh. (2022) Sustainable machining of Hastelloy C-276 enabling minimum quantity lubrication of environmentally compatible lubricants. Journal of Cleaner Production 373, pages 133928.
Crossref
Hongguang Liu, Hélène Birembaux, Yessine Ayed, Frédéric Rossi & Gérard Poulachon. (2022) Recent Advances on Cryogenic Assistance in Drilling Operation: A Critical Review. Journal of Manufacturing Science and Engineering 144:10.
Crossref
Munish Kumar Gupta, P. Niesłony, Murat Sarikaya, Mehmet Erdi Korkmaz, Mustafa Kuntoğlu, G.M. Królczyk & Muhammad Jamil. (2022) Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5V/grade 9 alloy. Tribology International 174, pages 107773.
Crossref
Xun Yang, Ling Chen, Zida Zhang, Yanyan Li & Yan Shui. (2022) Machinability assessment model for manufacturing high-temperature martensitic heat-resistant alloy steel via MQL. The International Journal of Advanced Manufacturing Technology 122:9-10, pages 3881-3901.
Crossref
Peng Zhang, Xinjian Li, Jiansheng Zhang, Yi Zhang, Xiaoguang Huang & Guigen Ye. (2022) Study on Chip Formation Mechanism of Single Crystal Copper Using Molecular Dynamics Simulations. Nanoscale Research Letters 17:1.
Crossref
Yongquan Gan, Yongqing Wang, Kuo Liu, Qile Bo & Haibo Liu. (2022) Modeling for prediction of tool-chip interface temperature in internal cryogenic turning considering film boiling. Mechanical Systems and Signal Processing 176, pages 109095.
Crossref
Priya Ranjan & Somashekhar S. Hiremath. (2021) Investigation of Coated Tool Performance on the Machinability, Surface Residual Stress and Chip Morphology of Martensitic AISI 420 Steel. Arabian Journal for Science and Engineering 47:7, pages 8503-8522.
Crossref
Jasjeevan Singh, Simranpreet Singh Gill, Manu Dogra, Rupinder Singh, Malkeet Singh, Shubham Sharma, Gursharan Singh, Changhe Li & S Rajkumar. (2022) State of the art review on the sustainable dry machining of advanced materials for multifaceted engineering applications: progressive advancements and directions for future prospects. Materials Research Express 9:6, pages 064003.
Crossref
Khirod Mahapatro & P Vamsi Krishna. (2021) Influence of flow parameters in the dual nozzle CO 2 -based vortex tube cooling system during turning of Ti-6Al-4V . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:9, pages 4828-4842.
Crossref
Aqib Mashood Khan, Saqib Anwar, Abdullah Alfaify, Muhammad Jamil, Shubham Sharma, Muhammad Umar Farooq, Waqas Khaliq & Asif Iqbal. (2022) Comparison of machinability and economic aspects in turning of Haynes-25 alloy under novel hybrid cryogenic-LN oils-on-water approach. The International Journal of Advanced Manufacturing Technology 120:1-2, pages 427-445.
Crossref
Anbesh Jamwal, Rajeev Agrawal, Monica Sharma, Anil Kumar, Sunil Luthra & Siwarit Pongsakornrungsilp. (2021) Two decades of research trends and transformations in manufacturing sustainability: a systematic literature review and future research agenda. Production Engineering 16:1, pages 109-133.
Crossref
Xuemu Li, Jianxin Deng, Yang Lu, Ran Duan & Dongliang Ge. (2021) Machinability Investigation and Sustainability Assessment of Dry Cutting AISI1045 Steel Using Tools Configured with Shark-Skin-Inspired Structures and WS2/C Coatings. International Journal of Precision Engineering and Manufacturing-Green Technology 9:1, pages 83-106.
Crossref
Aqib Mashood Khan, Ning He, Wei Zhao, Muhammad Jamil, Hongjun Xia, Longhui Meng & Munish Kumar Gupta. (2020) Cryogenic-LN 2 and conventional emulsion assisted machining of hardened steel: Comparison from sustainability perspective . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:14, pages 2310-2322.
Crossref
Mingzheng Liu, Changhe Li, Yanbin Zhang, Qinglong An, Min Yang, Teng Gao, Cong Mao, Bo Liu, Huajun Cao, Xuefeng Xu, Zafar Said, Sujan Debnath, Muhammad Jamil, Hafz Muhammad Ali & Shubham Sharma. (2022) Cryogenic minimum quantity lubrication machining: from mechanism to application. Frontiers of Mechanical Engineering 16:4, pages 649-697.
Crossref
Aqib Mashood Khan, Mohammed Alkahtani, Shubham Sharma, Muhammad Jamil, Asif Iqbal & Ning He. (2021) Sustainability-based holistic assessment and determination of optimal resource consumption for energy-efficient machining of hardened steel. Journal of Cleaner Production 319, pages 128674.
Crossref
Wei Zhao, Wenjia Su, Liang Li, Ding Fang & Ni Chen. (2020) Evolution of Mechanical Properties of Ti–6Al–4V Alloy in the Temperature Range of 20 to − 196 °C. Metals and Materials International 27:9, pages 3214-3224.
Crossref
Seok-Jae Ha, Dong-Wook Lim, Ji-Hun Kim, Jeong-Yeon Park & Ki-Hyeok Song. (2021) Economic evaluation and machining performance in Ti-6Al-4V titanium alloy milling by integrated CO2 & MQL injection system. Journal of Mechanical Science and Technology 35:9, pages 4135-4142.
Crossref
Md. Rezaul Karim, Juairiya Binte Tariq, Shah Murtoza Morshed, Sabbir Hossain Shawon, Abir Hasan, Chander Prakash, Sunpreet Singh, Raman Kumar, Yadaiah Nirsanametla & Catalin I. Pruncu. (2021) Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool. Sustainability 13:13, pages 7321.
Crossref
Danil Yu. Pimenov, Mozammel Mia, Munish K. Gupta, Alisson R. Machado, Ítalo V. Tomaz, Murat Sarikaya, Szymon Wojciechowski, Tadeusz Mikolajczyk & Wojciech Kapłonek. (2021) Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect. Journal of Materials Research and Technology 11, pages 719-753.
Crossref
Aqib Mashood Khan, Saqib Anwar, Muhammad Jamil, Mustafa M. Nasr, Munish Kumar Gupta, Mustafa Saleh, Shafiq Ahmad & Mozammel Mia. (2021) Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN2-Assisted Sustainable Machining of Ti-6Al-4V Alloy. Metals 11:1, pages 88.
Crossref
Chetan Agrawal, Navneet Khanna, Munish Kumar Gupta & Yusuf Kaynak. (2020) Sustainability assessment of in-house developed environment-friendly hybrid techniques for turning Ti-6Al-4V. Sustainable Materials and Technologies 26, pages e00220.
Crossref
Aqib Mashood Khan, Saqib Anwar, Munish Kumar Gupta, Abdullah Alfaify, Saqib Hasnain, Muhammad Jamil, Mozammel Mia & Danil Yurievich Pimenov. (2020) Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes. Energies 13:22, pages 6144.
Crossref
Khirod Mahapatro & Vamsi Krishna Pasam. (2020) Performance Study of Carbon Dioxide–Based Vortex Tube Cooling System in Turning of Ti-6Al-4V. Smart and Sustainable Manufacturing Systems 4:1, pages 20200016.
Crossref
Zhiwei Lai, Chengyong Wang, Lijuan Zheng, Wen Huang, Jianzhang Yang, Guangyu Guo & Weiqiang Xiong. (2020) Adaptability of AlTiN-based coated tools with green cutting technologies in sustainable machining of 316L stainless steel. Tribology International 148, pages 106300.
Crossref
Munish Kumar Gupta, Mozammel Mia, Muhammad Jamil, Rupinder Singh, Anil Kumar Singla, Qinghua Song, Zhanqiang Liu, Aqib Mashood Khan, M. Azizur Rahman & Murat Sarikaya. (2020) Machinability investigations of hardened steel with biodegradable oil-based MQL spray system. The International Journal of Advanced Manufacturing Technology 108:3, pages 735-748.
Crossref
Muhammad Jamil, Aqib Mashood Khan, Hussien Hegab, Munish Kumar Gupta, Mozammel Mia, Ning He, Guolong Zhao, Qinghua Song & Zhanqiang Liu. (2020) Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining. The International Journal of Advanced Manufacturing Technology 107:9-10, pages 4141-4157.
Crossref
Muhammad Jamil, Ning He, Liang Li & Aqib Mashood Khan. (2020) Clean manufacturing of Ti-6Al-4V under CO2-snow and hybrid nanofluids. Procedia Manufacturing 48, pages 131-140.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.