Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 24, 2020 - Issue 5
Submit an article Journal homepage
510
Views
12
CrossRef citations to date
0
Altmetric
Articles

Effect of MQL flow rate on machinability of AISI 4140 steel

Hüseyin GürbüzDepartment of Mechanical Engineering, Faculty of Engineering and Architecture, Batman University, Batman, Turkey; View further author information
,
Yunus Emre GönülaçarDepartment of Mechanical Engineering, Faculty of Engineering and Architecture, Siirt University, Siirt, Turkey; Correspondence[email protected]
View further author information
&
Şehmus BadayManufacturing Department, Technology Faculty, Batman University, Batman, TurkeyView further author information
Pages 663-687 | Published online: 27 Jun 2020

Citations (12)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

D. J. Hiran Gabriel, M. Parthiban, I. Kantharaj & N. Beemkumar. (2023) A review on sustainable alternatives for conventional cutting fluid applications for improved machinability. Machining Science and Technology 27:2, pages 157-207.
Read now
Prianka B. Zaman, M. N. Sultana & Nikhil Ranjan Dhar. (2022) Multi-variant hybrid techniques coupled with Taguchi in multi-response parameter optimisation for better machinability of turning alloy steel. Advances in Materials and Processing Technologies 8:3, pages 3127-3147.
Read now

Articles from other publishers (10)

Sutanu Misra, Yogesh Kumar & Goutam Paul. (2023) Study on Effects of Flow Rate of Coolant During CO2-Assisted MQL Turning of EN31 Steel. Journal of The Institution of Engineers (India): Series C.
Crossref
Nurrina Rosli, Nur Izzati Khoirunnisa Ismail, Amiril Sahab Abdul Sani & Afifah Mohd Ali. (2023) Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process. Tribology Online 18:6, pages 365-372.
Crossref
Manoj Kumar Sinha, Ashutosh Pal, Kamal Kishore, Amarjit Singh, Archana, Hitesh Sansanwal & Pankaj Sharma. (2022) Applications of sustainable techniques in machinability improvement of superalloys: a comprehensive review. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 473-498.
Crossref
İlhan Asiltürk, Mustafa Kuntoğlu, Rüstem Binali, Harun Akkuş & Emin Salur. (2023) A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel. Metals 13:2, pages 437.
Crossref
Yinzhi Wang, Chengli Zheng, Niancong Liu, Long Wu & Yun Chen. (2022) Surface integrity investigation and multi-objective optimization in high-speed cutting of AISI 304 stainless steel for dry cutting and MQCL conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pages 095440542211365.
Crossref
Prashant Kumar Tiwari, Samar Raj, Ramanuj Kumar, Amlana Panda & Ashok Kumar Sahoo. (2022) Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211324.
Crossref
A. BALASUADHAKAR, S. THIRUMALAI KUMARAN, RENDI KURNIAWAN & FAROOQ AHMED. (2022) A COMPREHENSIVE REVIEW ON MINIMUM QUANTITY LUBRICATION IN TURNING PROCESS. Surface Review and Letters 29:08.
Crossref
Billel Hamadi, Mohamed Athmane Yallese, Lakhdar Boulanouar, Abderazek Hammoudi & Mourad Nouioua. (2022) Evaluation of the cutting performance of PVD, CVD and MTCVD carbide inserts in dry turning of AISI 4140 steel using RSM-based NAMDE optimization. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:8.
Crossref
Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene & Mohammad Jahazi. (2022) A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 3977-3987.
Crossref
M. A. Makhesana, J. A. Baravaliya, R. J. Parmar, B. K. Mawandiya & K. M. Patel. (2021) Machinability improvement and sustainability assessment during machining of AISI 4140 using vegetable oil-based MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:12.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.