Advanced search
Publication Cover
Journal of Earthquake Engineering Volume 16, 2012 - Issue 5
Submit an article Journal homepage
372
Views
32
CrossRef citations to date
0
Altmetric
Original Articles

Jet-Pacs Project: Dynamic Experimental Tests and Numerical Results Obtained for a Steel Frame Equipped with Hysteretic Damped Chevron Braces

Felice Carlo Ponzo Dipartimento di Strutture, Geotecnica, Geologia Applicata all'Ingegneria, Università della Basilicata, Potenza, Italy
,
Antonio Di Cesare Dipartimento di Strutture, Geotecnica, Geologia Applicata all'Ingegneria, Università della Basilicata, Potenza, Italy
,
Domenico Nigro Dipartimento di Strutture, Geotecnica, Geologia Applicata all'Ingegneria, Università della Basilicata, Potenza, Italy
,
Alfonso Vulcano Dipartimento di Strutture, Università della Calabria, Rende (Cosenza), Italy
,
Fabio Mazza Dipartimento di Strutture, Università della Calabria, Rende (Cosenza), ItalyCorrespondence[email protected]
,
Mauro Dolce Dipartimento di Protezione Civile, Roma, Italy
&
Claudio Moroni Dipartimento di Protezione Civile, Roma, Italy
 show all
Pages 662-685 | Received 20 Aug 2011, Accepted 10 Jan 2012, Published online: 26 Jun 2012

Citations (32)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

M.F. Ferrotto, P.G. Asteris & L. Cavaleri. (2022) Strategies of Identification of a Base-Isolated Hospital Building by Coupled Quasi-Static and Snap-Back Tests. Journal of Earthquake Engineering 26:8, pages 4172-4200.
Read now
Khaled Ghaedi, Zainah Ibrahim, Ahad Javanmardi & Rajesh Rupakhety. (2021) Experimental Study of a New Bar Damper Device for Vibration Control of Structures Subjected to Earthquake Loads. Journal of Earthquake Engineering 25:2, pages 300-318.
Read now

Articles from other publishers (30)

Kambiz Cheraghi, Mehrzad TahamouliRoudsari & Sasan Kiasat. (2023) Numerical and analytical investigation of U-shape dampers and its effect on steel frames. Structures 55, pages 498-509.
Crossref
Elnaz Mokhtari, Michele Palermo, Vittoria Laghi, Andrea Incerti, Claudio Mazzotti & Stefano Silvestri. (2022) Quasi-static cyclic tests on a half-scaled two-storey steel frame equipped with Crescent Shaped Braces at both storeys: Experimental vs. numerical response. Journal of Building Engineering 62, pages 105371.
Crossref
Vincenzo Manfredi, Giuseppe Santarsiero, Angelo Masi & Giuseppe Ventura. (2021) The High-Performance Dissipating Frame (HPDF) System for the Seismic Strengthening of RC Existing Buildings. Sustainability 13:4, pages 1864.
Crossref
Francesco Smarra, Giovanni Domenico Di Girolamo, Vincenzo Gattulli, Fabio Graziosi & Alessandro D’Innocenzo. (2020) Learning Models for Seismic-Induced Vibrations Optimal Control in Structures via Random Forests. Journal of Optimization Theory and Applications 187:3, pages 855-874.
Crossref
Ileana Corbi, Ottavia Corbi & Haitao Li. (2020) Convolutive PD controller for hybrid improvement of dynamic structural systems. Soil Dynamics and Earthquake Engineering 137, pages 106255.
Crossref
Weizhi Xu, Dongsheng Du, Shuguang Wang & Weiwei Li. (2020) A New Method to Calculate Additional Damping Ratio considering the Effect of Excitation Frequency. Advances in Civil Engineering 2020, pages 1-15.
Crossref
G. D. Di Girolamo, F. Smarra, V. Gattulli, F. Potenza, F. Graziosi & A. D'Innocenzo. (2020) Data‐driven optimal predictive control of seismic induced vibrations in frame structures. Structural Control and Health Monitoring 27:4.
Crossref
Daniele Sivori, Marco Lepidi & Serena Cattari. (2019) Ambient vibration tools to validate the rigid diaphragm assumption in the seismic assessment of buildings. Earthquake Engineering & Structural Dynamics 49:2, pages 194-211.
Crossref
Fabio Mazza & Mirko Mazza. (2019) Seismic retrofitting of gravity-loads designed r.c. framed buildings combining CFRP and hysteretic damped braces. Bulletin of Earthquake Engineering 17:6, pages 3423-3445.
Crossref
Baoshun Wang, Weiming Yan & Haoxiang He. (2018) Mechanical Performance and Design Method of Improved Lead Shear Damper with Long Stroke. Shock and Vibration 2018, pages 1-18.
Crossref
Stefano Sorace & Gloria Terenzi. (2017) Existing prefab R/C industrial buildings: Seismic assessment and supplemental damping-based retrofit. Soil Dynamics and Earthquake Engineering 94, pages 193-203.
Crossref
Fabio Mazza, Emilia Pedace & Francesco Del Favero. (2017) Effectiveness of damped braces to mitigate seismic torsional response of unsymmetric-plan buildings. Mechanical Systems and Signal Processing 85, pages 610-624.
Crossref
Antonio Di Cesare & Felice Carlo Ponzo. (2017) Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor. Shock and Vibration 2017, pages 1-20.
Crossref
Laura Gioiella, Enrico Tubaldi, Fabrizio Gara, Lugino Dezi & Andrea Dall’Asta. (2017) Analysis and comparison of two different configurations of external dissipative systems. Procedia Engineering 199, pages 164-169.
Crossref
Fabio Mazza. (2016) Nonlinear seismic analysis of r.c. framed buildings with setbacks retrofitted by damped braces. Engineering Structures 126, pages 559-570.
Crossref
Mosbeh Kaloop, Jong Hu & Yasser Bigdeli. (2016) Identification of the Response of a Controlled Building Structure Subjected to Seismic Load by Using Nonlinear System Models. Applied Sciences 6:10, pages 301.
Crossref
Fabio Mazza. (2016) Nonlinear seismic analysis of unsymmetric-plan structures retrofitted by hysteretic damped braces. Bulletin of Earthquake Engineering 14:4, pages 1311-1331.
Crossref
Mariella Diaferio & Dora Foti. (2015) Mechanical behavior of buildings subjected to impulsive motions. Bulletin of Earthquake Engineering 14:3, pages 849-862.
Crossref
Mirko Mazza. (2015) Nonlinear analysis of r.c. framed buildings retrofitted with elastomeric and friction bearings under near-fault earthquakes. Earthquake Science 28:5-6, pages 365-377.
Crossref
Mirko Mazza. (2015) Effects of near-fault ground motions on the nonlinear behaviour of reinforced concrete framed buildings. Earthquake Science 28:4, pages 285-302.
Crossref
Fabio Mazza. (2015) Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques. Earthquakes and Structures 9:1, pages 29-48.
Crossref
A. Baratta, I. Corbi & O. Corbi. (2015) Algorithm design of an hybrid system embedding influence of soil for dynamic vibration control. Soil Dynamics and Earthquake Engineering 74, pages 79-88.
Crossref
Fabio Mazza & Alfonso Vulcano. (2014) Displacement-based design procedure of damped braces for the seismic retrofitting of r.c. framed buildings. Bulletin of Earthquake Engineering 13:7, pages 2121-2143.
Crossref
Michele Palermo, Stefano Silvestri, Giada Gasparini & Tomaso Trombetti. (2014) Crescent shaped braces for the seismic design of building structures. Materials and Structures 48:5, pages 1485-1502.
Crossref
Fabio Mazza, Mirko Mazza & Alfonso Vulcano. (2015) Displacement-based seismic design of hysteretic damped braces for retrofitting in-elevation irregular r.c. framed structures. Soil Dynamics and Earthquake Engineering 69, pages 115-124.
Crossref
Antonio Di Cesare, Felice Carlo Ponzo & Domenico Nigro. (2014) Assessment of the performance of hysteretic energy dissipation bracing systems. Bulletin of Earthquake Engineering 12:6, pages 2777-2796.
Crossref
Fabio Mazza & Alfonso Vulcano. (2014) Equivalent viscous damping for displacement-based seismic design of hysteretic damped braces for retrofitting framed buildings. Bulletin of Earthquake Engineering 12:6, pages 2797-2819.
Crossref
Fabio Mazza. (2014) Displacement-based seismic design of hysteretic damped braces for retrofitting in-plan irregular r.c. framed structures. Soil Dynamics and Earthquake Engineering 66, pages 231-240.
Crossref
Mahmoud Bayat & Mahdi Bayat. (2014) Seismic behavior of special moment-resisting frames with energy dissipating devices under near source ground motions. Steel and Composite Structures 16:5, pages 533-557.
Crossref
Seyed Amin Mousavi & Khosrow Bargi. (2013) Enhancing Seismic Capacity of Pile-Supported Wharves Using Yielding Dampers. Journal of Structures 2013, pages 1-13.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.