Citations (27)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Bandaru Kiran & Dega Nagaraju. (2023) Simulation and experimental study on effect of surface residual stresses in dry orthogonal micro turning sample. Australian Journal of Mechanical Engineering 21:4, pages 1396-1408.
Read now
Read now
S. Rajarajan, C. Ramesh Kannan & Milon Selvam Dennison. (2022) A comparative study on the machining characteristics on turning AISI 52100 alloy steel in dry and microlubrication condition. Australian Journal of Mechanical Engineering 20:2, pages 360-371.
Read now
Read now
Milon D. Selvam & N. M. Sivaram. (2020) A comparative study on the surface finish achieved during turning operation of AISI 4340 steel in flooded, near-dry and dry conditions. Australian Journal of Mechanical Engineering 18:3, pages 457-466.
Read now
Read now
Jafrey Daniel James Dhilip, J. Jeevan, D. Arulkirubakaran & M. Ramesh. (2020) Investigation and optimization of parameters for hard turning of OHNS steel. Materials and Manufacturing Processes 35:10, pages 1113-1119.
Read now
Read now
Articles from other publishers (23)
Adel T. Abbas, Neeraj Sharma, Mahmoud S. Soliman, Magdy M. El Rayes, Rakesh Chandmal Sharma & Ahmed Elkaseer. (2023) Effect of Wiper Edge Geometry on Machining Performance While Turning AISI 1045 Steel in Dry Conditions Using the VIKOR-ML Approach. Machines 11:7, pages 719.
Crossref
Crossref
Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena & Sudhansu Ranjan Das. (2022) Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:4, pages 843-864.
Crossref
Crossref
Smita Padhan, Naresh Kumar Wagri, Lalatendu Dash, Anshuman Das, Sudhansu Ranjan Das, Mohammad Rafighi & Priyaranjan Sharma. (2023) Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL. Lubricants 11:2, pages 49.
Crossref
Crossref
Jana Moravčíková, Roman Moravčík & Marián Palcut. (2022) Effect of Heat Treatment on the Resulting Dimensional Characteristics of the C45 Carbon Steel after Turning. Metals 12:11, pages 1899.
Crossref
Crossref
Yansong Zhang, Huan Xue, Yongchun Li, Xuelin Wang, Xinli Jiang, Chongwen Yang, Kewei Fang, Wenqian Zhang & Hui Jiang. (2022) Effects of Multi-Pass Turning on Stress Corrosion Cracking of AISI 304 Austenitic Stainless Steel. Micromachines 13:10, pages 1745.
Crossref
Crossref
Anshuman Das, Sudhansu Ranjan Das, Asutosh Panda & Saroj Kumar Patel. (2022) Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:5, pages 1889-1905.
Crossref
Crossref
Sameh Dabees, Saeed Mirzaei, Pavel Kaspar, Vladimír Holcman & Dinara Sobola. (2022) Characterization and Evaluation of Engineered Coating Techniques for Different Cutting Tools—Review. Materials 15:16, pages 5633.
Crossref
Crossref
Anshuman Das, Sitesh Mohapatra, Kishor Kumar Gajrani, Sudhansu Ranjan Das & Saroj Kumar Patel. (2022) Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pages 095440542211118.
Crossref
Crossref
Fredrik Bjørheim, Dimitrios G. Pavlou & Sudath C. Siriwardane. (2022) Nonlinear fatigue life prediction model based on the theory of the S‐N fatigue damage envelope. Fatigue & Fracture of Engineering Materials & Structures 45:5, pages 1480-1493.
Crossref
Crossref
Anshuman Das, Madhav Kumar Gupta, Sudhansu Ranjan Das, Asutosh Panda, Saroj Kumar Patel & Smita Padhan. (2022) Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:4.
Crossref
Crossref
Csaba Felho & Gyula Varga. (2022) Theoretical Roughness Modeling of Hard Turned Surfaces Considering Tool Wear. Machines 10:3, pages 188.
Crossref
Crossref
Anshuman Das, Miyaz Kamal, Sudhansu Ranjan Das, Saroj Kumar Patel, Asutosh Panda, Mohammad Rafighi & Bibhuti Bhushan Biswal. (2021) Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:6, pages 3174-3197.
Crossref
Crossref
M. Manikandan & S. Prabagaran. (2021) Investigations on producing optimal grinding spindle using 36CrNiMo4 alloy steel. Materials Today: Proceedings 37, pages 1622-1628.
Crossref
Crossref
M. Manikandan & S. Prabagaran. (2021) The outcome of control factors on surface quality on cylindrical grinding of 36CrNiMo4 grade steel alloy. Materials Today: Proceedings 37, pages 1618-1621.
Crossref
Crossref
A H Gadagi, C V Adake, S I Sangolli & Shashidhar Halligerimath. (2020) Comparison of multiple regression and radial basis artificial neural network models in turning of mild steel components. IOP Conference Series: Materials Science and Engineering 872:1, pages 012014.
Crossref
Crossref
Debabrata Samantaraya & Sanjay Lakade. (2020) Hard Turning Cutting Tool Materials used in Automotive and Bearing Manufacturing Applications – A review. IOP Conference Series: Materials Science and Engineering 814:1, pages 012005.
Crossref
Crossref
M. MANIKANDAN, S. PRABAGARAN, N. M. SIVARAM & SELVAM DENNISON MILON. (2020) A REVIEW ON EFFECT OF DRESSING AND GRINDING FLUID IN
CYLINDRICAL TRAVERSE ROUGH AND FINISH CUT GRINDING
PROCESSES. i-manager's Journal on Mechanical Engineering 10:2, pages 35.
Crossref
Crossref
M. MANIKANDAN, S. PRABAGARAN, N. M. SIVARAM & SELVAM DENNISON MILON. (2020) A STUDY ON OPTIMIZATION OF MACHINING PARAMETERS IN
CYLINDRICAL TRAVERSE ROUGH AND FINISH CUT
GRINDING PROCESSES. i-manager's Journal on Mechanical Engineering 10:1, pages 51.
Crossref
Crossref
Mustafa ÖZDEMİR. (2019) Yüzey pürüzlülüğü üzerinde kesme parametrelerinin etki oranlarının Yüzey Yanıt Yöntemi kullanarak Analizi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 7:3, pages 639-648.
Crossref
Crossref
Milon Selvam Dennison, Sivaram N M, Debabrata Barik & Senthil Ponnusamy. (2019) Turning operation of AISI 4340 steel in flooded, near-dry and dry conditions: a comparative study on tool-work interface temperature. Mechanics and Mechanical Engineering 23:1, pages 172-182.
Crossref
Crossref
RAMASAMY KARUPPASAMY, SELVAM DENNISON MILON & E. BABURAJ. (2018) SURFACE FINISH ACHIEVED IN PRODUCING PNEUMATIC
PISTON ROD: AN EXPERIMENTAL INVESTIGATION. i-manager's Journal on Mechanical Engineering 8:3, pages 9.
Crossref
Crossref
SELVAM DENNISON MILON & MEJI M. ABISHA. (2018) A COMPARATIVE STUDY ON THE SURFACE FINISH ACHIEVED
DURING FACE MILLING OF AISI 1045 STEEL COMPONENTS. i-manager's Journal on Mechanical Engineering 8:2, pages 18.
Crossref
Crossref
SELVAM MILON D.SIVARAM N.M.. (2017) THE EFFECTIVENESS OF VARIOUS CUTTING FLUIDS ON THE SURFACE ROUGHNESS OF AISI 1045 STEEL DURING TURNING OPERATION USING MINIMUM QUANTITY LUBRICATION SYSTEM. i-manager’s Journal on Future Engineering and Technology 13:1, pages 36.
Crossref
Crossref