http://orcid.org/0000-0003-2029-4600
Citations (148)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Hongyu Chen, Konrad Kosiba, C. Suryanarayana, Tiwen Lu, Yang Liu, Yonggang Wang & Konda Gokuldoss Prashanth. (2023) Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites. International Materials Reviews 68:8, pages 1192-1244.
Read now
Read now
William Hearn, Peter Harlin & Eduard Hryha. (2023) Development of powder bed fusion – laser beam process for AISI 4140, 4340 and 8620 low-alloy steel. Powder Metallurgy 66:2, pages 94-106.
Read now
Read now
Yu Yin, Qiyang Tan, Michael Bermingham, Ning Mo, Jingqi Zhang & Ming-Xing Zhang. (2022) Laser additive manufacturing of steels. International Materials Reviews 67:5, pages 487-573.
Read now
Read now
Y. Zhu, Y. Yang, P. Lu, X. Ge & H. Yang. (2019) Influence of surface pores on selective laser melted parts under lubricated contacts: a case study of a hydraulic spool valve. Virtual and Physical Prototyping 14:4, pages 395-408.
Read now
Read now
Articles from other publishers (144)
Jiyuan Liu, Bolin Li, Shuai Zhang, Guojie Liu, Hao Ying, Dong Li, Chuqi Xie, Xinyi Zhang, Xuelian Li, Li Wang & Shenghai Wang. (2024) Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance. Intermetallics 164, pages 108103.
Crossref
Crossref
Yongkun Mu, Kang Sun, Yuefei Jia, Nizhen Zhang, Shiwei Wu, Yandong Jia & Gang Wang. (2023) 3D-printed strong and ductile high-entropy alloys with orientation arranged nanostructure complex. Journal of Alloys and Compounds 968, pages 171824.
Crossref
Crossref
Yuchao Bai, Yan Jin Lee, Yunfa Guo, Qi Yan, Cuiling Zhao, A. Senthil Kumar, Jun Min Xue & Hao Wang. (2023) Efficient post-processing of additive manufactured maraging steel enhanced by the mechanochemical effect. International Journal of Machine Tools and Manufacture 193, pages 104086.
Crossref
Crossref
Leonidas Gargalis, Leonidas Karavias, Joachim S. Graff, Spyros Diplas, Elias P. Koumoulos & Evangelia K. Karaxi. (2023) A Comparative Investigation of Duplex and Super Duplex Stainless Steels Processed through Laser Powder Bed Fusion. Metals 13:11, pages 1897.
Crossref
Crossref
Satish Prakash Karlapudy, T. Nancharaiah & V. V. Subba Rao. (2023) Influence of post-heat treatment on microstructure, texture, and mechanical properties of 18Ni-300 maraging steel fabricated by using LPBF technique. Progress in Additive Manufacturing.
Crossref
Crossref
Umesh Kizhakkinan, Sankaranarayanan Seetharaman, Nagarajan Raghavan & David W. Rosen. (2023) Laser Powder Bed Fusion Additive Manufacturing of Maraging Steel: A Review. Journal of Manufacturing Science and Engineering 145:11.
Crossref
Crossref
Qing Wang, Deyin Kong & Zhihui Zhang. (2023) Ultra-high strength and high toughness 24CrNiMo alloy steel fabricated by laser powder bed fusion and subsequent quenching. Journal of Materials Research and Technology 27, pages 5109-5127.
Crossref
Crossref
Amanda Rossi de Oliveira, Henrique Lopes de Castro, Sydney Ferreira Santos, André Luiz Jardini & Erik Gustavo Del Conte. (2023) Effects of spatter deposition and build location in laser powder bed fusion of maraging steel parts. The International Journal of Advanced Manufacturing Technology 129:5-6, pages 2111-2123.
Crossref
Crossref
Sung Hwan Hong, Sung Yong Ha, Gian Song, Jaiyoung Cho, Ki Buem Kim, Hae Jin Park, Gyeol Chan Kang & Jin Man Park. (2023) Correlation between micro-to-macro mechanical properties and processing parameters on additive manufactured 18Ni-300 maraging steels. Journal of Alloys and Compounds 960, pages 171031.
Crossref
Crossref
Shiqi Zhang, Nan Zhou, Cong Ma, Jing Liu, Shilong Liu & R.D.K. Misra. (2023) Simultaneous enhancement of strength and hydrogen embrittlement resistance of laser-powder bed fusion maraging steel via long-term low-temperature aging. Corrosion Science 223, pages 111440.
Crossref
Crossref
Leonidas Gargalis, Leonidas Karavias, Joachim S. Graff, Spyros Diplas, Elias P. Koumoulos & Evangelia K. Karaxi. (2023) Novel Powder Feedstock towards Microstructure Engineering in Laser Powder Bed Fusion: A Case Study on Duplex/Super Duplex and Austenitic Stainless-Steel Alloys. Metals 13:9, pages 1546.
Crossref
Crossref
T. Mukherjee, J.W. Elmer, H.L. Wei, T.J. Lienert, W. Zhang, S. Kou & T. DebRoy. (2023) Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Progress in Materials Science 138, pages 101153.
Crossref
Crossref
Jian Zhang, Jikang Fan, Junqiang Xu, Dongqing Yang, Yong Peng & Kehong Wang. (2023) The effect of heat input on the microstructure and mechanical properties of 18Ni 300 maraging steel fabricated by arc directed energy deposition. Materials Science and Engineering: A 884, pages 145545.
Crossref
Crossref
Xingyuan Mei, Yu Yan & Lijie Qiao. (2023) Research on hydrogen embrittlement behavior of L-PBF 18Ni(300) maraging steel by experiments and numerical simulations. Acta Materialia 256, pages 119141.
Crossref
Crossref
I.F. Ostrovski, A. Rabelo, S. Bodziak, J.C.G. Milan, F.H. Lafratta, V.L. Soethe Parucker & D.A. Duarte. (2023) Effect of the plasma nitriding on the mechanical properties of the 18Ni300 steel obtained by selective laser melting. Surface and Coatings Technology 466, pages 129688.
Crossref
Crossref
Kudakwashe Nyamuchiwa, Robert Palad, Joan Panlican, Yuan Tian & Clodualdo AranasJr.Jr.. (2023) Recent Progress in Hybrid Additive Manufacturing of Metallic Materials. Applied Sciences 13:14, pages 8383.
Crossref
Crossref
Christine M. Smudde, Christopher W. San Marchi, Michael R. Hill & Jeffery C. Gibeling. (2023) Evaluation of residual stress reproducibility and orientation dependent fatigue crack growth in powder bed fusion stainless steel. Materials Science and Engineering: A 879, pages 145266.
Crossref
Crossref
Ana Santana, Adriana Eres-Castellanos, Jose Antonio Jimenez, Rosalía Rementeria, Carlos Capdevila & Francisca G. Caballero. (2023) Effect of layer thickness and laser emission mode on the microstructure of an additive manufactured maraging steel. Journal of Materials Research and Technology 25, pages 6898-6912.
Crossref
Crossref
Y. Hong, D.D. Dong, G.P. Zou, Y. Li, S.S. Lin, T.C. Kuang, Y.Z. Wu & M.J. Dai. (2023) The corrosion response of the heterogeneous nitriding structure originated from the laser additive manufactured steel. Corrosion Science 218, pages 111188.
Crossref
Crossref
Philipp Kürnsteiner, Pere Barriobero-Vila, Priyanshu Bajaj, Frédéric De Geuser, Markus B. Wilms, Eric A. Jägle & Dierk Raabe. (2023) Designing an Fe-Ni-Ti maraging steel tailor-made for laser additive manufacturing. Additive Manufacturing 73, pages 103647.
Crossref
Crossref
Mahmoud Osman, Sheida Sarafan, Priti Wanjara, Fabrice Bernier, Sila Ece Atabay, Javad Gholipour, Marjan Molavi-Zarandi, Josh Soost & Mathieu Brochu. (2023) Effect of Heat Treatment on the Microstructure and Mechanical Properties of 18Ni-300 Maraging Steel Produced by Additive–Subtractive Hybrid Manufacturing. Materials 16:13, pages 4749.
Crossref
Crossref
Chen Gao, Changjun Chen, Linjun Jiang & Min Zhang. (2023) Design of maraging steel with aluminum by laser metal deposition. Journal of Materials Research 38:11, pages 3022-3033.
Crossref
Crossref
Jarosław Piekło & Aldona Garbacz-Klempka. (2023) Analysis of Phenomenon of Plasticity Loss of Steel Core Made by Selective Laser Melting Method in Zone of Pressure Mould Conformal Cooling Channel. Materials 16:12, pages 4205.
Crossref
Crossref
Wei Zhang, Xianhe Shang, Minglei Hu, Xing He, Bing Yang, Kunjie Dai, Xiaoqing Ni, Lin Lu, Liangdong Zhou, Liang Zhang, Decheng Kong & Chaofang Dong. (2023) Microstructure and corrosion-wear behaviors for laser cladding repaired martensitic stainless steels using Co-based and Ni-based powders. Materials Today Communications 35, pages 106287.
Crossref
Crossref
Chetana Madhukar Suryawanshi, Bhanupratap Gaur, Amit Kumar Singh, Deepak Soman, Samrat Sagar, Ravi Bhallamudi & Sushil Mishra. (2023) Microstructure and mechanical characterization of direct metal laser sintered Ti-6Al-4V alloy for orthopedic implant applications. Materials Today Communications 35, pages 105770.
Crossref
Crossref
Jian Zhang, Jikang Fan, Yong Peng, Dongqing Yang & Kehong Wang. (2023) Microstructures and properties of AlCoCrFeNi2.5 eutectic high entropy alloy fabricated by selective laser melting. Materials Science and Engineering: A 875, pages 145081.
Crossref
Crossref
M.J. Benoit, S. Tabaie, T. Waqar, T. Ganton, B.S. Amirkhiz, A. Hadadzadeh & A. Nasiri. (2023) Effects of additive manufacturing processes and isothermal aging on the microstructure and properties of 13-8 Mo precipitation hardening martensitic stainless steel. Additive Manufacturing 72, pages 103615.
Crossref
Crossref
Chong-Ming Jiang, Jeng-Rong Ho, Pi-Cheng Tung & Chih-Kuang Lin. (2022) Tempering Effect on the Anisotropic Mechanical Properties of Selective Laser Melted 420 Stainless Steel. Journal of Materials Engineering and Performance 32:11, pages 5082-5096.
Crossref
Crossref
Wee King Law, Ziyang Wu, Chenghao Song, Haoliang Wang, Kok-Cheong Wong, Chin Seong Lim & Zhenzhong Sun. (2022) Optimization of Selective Laser Melting Process Parameters Via Taguchi's Methods and Gray Relational Analysis for 3D Printing of 18Ni‐300 Maraging Steel. steel research international 94:5.
Crossref
Crossref
Chaolin Tan, Qian Li, Xiling Yao, Lequn Chen, Jinlong Su, Fern Lan Ng, Yuchan Liu, Tao Yang, Youxiang Chew, Chain Tsuan Liu & Tarasankar DebRoy. (2023) Machine Learning Customized Novel Material for Energy‐Efficient 4D Printing. Advanced Science 10:10.
Crossref
Crossref
Bibo Yao, Zhenhua Li, Baoren Teng & Jing Liu. (2023) Laser powder bed fusion of granulation-sintering-deoxygenation WC/18Ni300 composites: anisotropic microstructure characterization and wear properties. Rapid Prototyping Journal.
Crossref
Crossref
Majid Laleh, Esmaeil Sadeghi, Reynier I. Revilla, Qi Chao, Nima Haghdadi, Anthony E. Hughes, Wei Xu, Iris De Graeve, Ma Qian, Ian Gibson & Mike Y. Tan. (2023) Heat treatment for metal additive manufacturing. Progress in Materials Science 133, pages 101051.
Crossref
Crossref
T. Tekin, G. Ischia, F. Naclerio, R. Ipek & A. Molinari. (2023) Effect of a direct aging heat treatment on the microstructure and the tensile properties of a 18Ni-300 maraging steel produced by Laser Powder Bed Fusion. Materials Science and Engineering: A, pages 144921.
Crossref
Crossref
Richard Fabian & Amir Hadadzadeh. (2023) Breaking strength-ductility trade-off in laser-powder bed fused Fe–Cr–Ni–Al maraging stainless steel: Controlled precipitation and preserved dislocations. Materials Science and Engineering: A 868, pages 144761.
Crossref
Crossref
Chong Tan, Qi Shi, Kefeng Li, Khashayar Khanlari & Xin Liu. (2023) Effect of oxygen content of tantalum powders on the characteristics of parts processed by laser powder bed fusion. International Journal of Refractory Metals and Hard Materials 110, pages 106008.
Crossref
Crossref
Gökhan Özer & Mustafa Safa Yilmaz. 2023. Springer Handbook of Additive Manufacturing. Springer Handbook of Additive Manufacturing
751
776
.
Ilaria Caravella, Daniele Cortis, Luca Di Angelo & Donato Orlandi. (2022) Experimental Data Collection of Surface Quality Analysis of CuCrZr Specimens Manufactured with SLM Technology: Analysis of the Effects of Process Parameters. Materials 16:1, pages 98.
Crossref
Crossref
Gökhan Özer, Hamaid Mahmood Khan, Gürkan Tarakçi, Mustafa Safa Yilmaz, Paşa Yaman, Sencer Süreyya Karabeyoğlu & Alptekin Kisasöz. (2022) Effect of heat treatments on the microstructure and wear behaviour of a selective laser melted maraging steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:6, pages 2526-2535.
Crossref
Crossref
Jaydeep Vishwakarma, K Chattopadhyay & N C Santhi Srinivas. (2022) Effect of build orientation on wear and erosion behavior of maraging steel processed by powder bed fusion using laser beam (PBF-LB). Surface Topography: Metrology and Properties 10:4, pages 045006.
Crossref
Crossref
Jinlong Su, Chaolin Tan, Fern Lan Ng, Fei Weng, Lequn Chen, Fulin Jiang, Jie Teng & Youxiang Chew. (2022) Additive manufacturing of novel heterostructured martensite-austenite dual-phase steel through in-situ alloying. Materials Today Communications 33, pages 104724.
Crossref
Crossref
Baopeng Zhang, Shasha Zhang, Huanqing Yang, Dongjian Peng, Yun Wang & Haihong Zhu. (2022) Investigating the influence of the scanning rotation angle on the microstructure and properties of LPBFed CuCr0.8 alloy. Journal of Manufacturing Processes 84, pages 1150-1161.
Crossref
Crossref
Yi Wei, Genyu Chen, Mingquan Li, Wei Li, Yunlong Zhou, Jianbo Xu & Wei Zhou. (2022) High-precision laser powder bed fusion of 18Ni300 maraging steel and its SiC reinforcement composite materials. Journal of Manufacturing Processes 84, pages 750-763.
Crossref
Crossref
Yung Zhen Lek, Chengcheng Wang, Xiaojun Shen, Ze Chen, Upadrasta Ramamurty & Kun Zhou. (2022) Additive manufacturing of corrosion-resistant maraging steel M789 by directed energy deposition. Materials Science and Engineering: A 857, pages 144032.
Crossref
Crossref
D. Riabov, K. Frisk, M. Thuvander, E. Hryha & S. Bengtsson. (2022) Design and characterization of a cobalt-free stainless maraging steel for laser-based powder bed fusion. Materials & Design 223, pages 111180.
Crossref
Crossref
Siyuan Wei, Punit Kumar, Kwang Boon Lau, Delvin Wuu, Laura-Lynn Liew, Fengxia Wei, Siew Lang Teo, Augustine Cheong, Chee Koon Ng, Baicheng Zhang, Cheng Cheh Tan, Pei Wang & Upadrasta Ramamurty. (2022) Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion. Additive Manufacturing 59, pages 103190.
Crossref
Crossref
Haibing Xiao, Yongzhang Chen, Mingjun Liu, Yongquan Zhou, Chenlin Du & Wei Zhang. (2022) Influence of Laser Additive Manufacturing and Laser Polishing on Microstructures and Mechanical Properties of High-Strength Maraging Steel Metal Materials. Applied Sciences 12:20, pages 10340.
Crossref
Crossref
Gao Huang, Kaiwen Wei, Jinfeng Deng & Xiaoyan Zeng. (2022) High power laser powder bed fusion of 18Ni300 maraging steel: Processing optimization, microstructure and mechanical properties. Materials Science and Engineering: A 856, pages 143983.
Crossref
Crossref
Xingyuan Mei, Yu Yan, Huadong Fu, Xiaodong Gao, Shiyu Huang & Lijie Qiao. (2022) Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni(300) maraging steel. Additive Manufacturing 58, pages 103071.
Crossref
Crossref
Adriana Eres-Castellanos, Ana Santana, David De-Castro, Jose Antonio Jimenez, Rosalia Rementeria, Carlos Capdevila & Francisca G. Caballero. (2022) Effect of processing parameters on texture and variant selection of as-built 300 maraging steel processed by laser powder bed fusion. Scientific Reports 12:1.
Crossref
Crossref
Peifeng Liu, Hong Wu, Luxin Liang, Deye Song, Jingbo Liu, Xueru Ma, Kaiyang Li, Qihong Fang, Yingtao Tian & Ian Baker. (2022) Microstructure, mechanical properties and corrosion behavior of additively-manufactured Fe–Mn alloys. Materials Science and Engineering: A 852, pages 143585.
Crossref
Crossref
Lulu Guo, Lina Zhang, Joel Andersson & Olanrewaju Ojo. (2022) Additive manufacturing of 18% nickel maraging steels: Defect, structure and mechanical properties: A review. Journal of Materials Science & Technology 120, pages 227-252.
Crossref
Crossref
I. Ferretto, D. Kim, M. Mohri, E. Ghafoori, W.J. Lee & C. Leinenbach. (2022) Shape recovery performance of a (V, C)-containing Fe–Mn–Si–Ni–Cr shape memory alloy fabricated by laser powder bed fusion. Journal of Materials Research and Technology 20, pages 3969-3984.
Crossref
Crossref
Bheemavarapu Subba Rao & Thella Babu Rao. (2022) Effect of Process Parameters on Powder Bed Fusion Maraging Steel 300: A Review. Lasers in Manufacturing and Materials Processing 9:3, pages 338-375.
Crossref
Crossref
Daniel F. S. Ferreira, G. Miranda, Filipe J. Oliveira & José M. Oliveira. (2022) Conventionally and SLM-manufactured 18Ni300 steel: mechanical and tribological behaviour in dry sliding against PP40 composite. The International Journal of Advanced Manufacturing Technology 122:3-4, pages 1245-1258.
Crossref
Crossref
C. V. Funch, K. V. Dahl, T. L. Christiansen & M. A. J. Somers. (2022) Chromizing of Additively Manufactured Maraging Steel; Microstructural Evolution and Corrosion Performance. HTM Journal of Heat Treatment and Materials 77:4, pages 245-268.
Crossref
Crossref
Hao Luo, Xiaoqiang Li, Cunliang Pan, Shengguan Qu, Chenyang Jiang, Pengjiang He & Keli Zeng. (2022) Interfacial characterization and mechanical properties of additively manufactured IN718/CoNiCrAlY laminate. Materials Science and Engineering: A 850, pages 143578.
Crossref
Crossref
Vittorio Alfieri, Venanzio Giannella, Fabrizia Caiazzo & Raffaele Sepe. (2022) Influence of position and building orientation on the static properties of LPBF specimens in 17-4 PH stainless steel. Forces in Mechanics 8, pages 100108.
Crossref
Crossref
Jan Platl, Daniel Rainer, Harald Leitner, Christoph Turk, Francesco Galbusera, Ali Gökhan Demir, Barbara Previtali & Ronald Schnitzer. (2022) Potential Causes for Cracking of a Laser Powder Bed Fused Carbon-free FeCoMo AlloyPotenzielle Rissursachen einer selektiv lasergeschmolzenen kohlenstofffreien FeCoMo Legierung. BHM Berg- und Hüttenmännische Monatshefte 167:7, pages 325-331.
Crossref
Crossref
Moses J. Paul, Yokasundery Muniandy, Jamie J. Kruzic, Upadrasta Ramamurty & Bernd Gludovatz. (2022) Effect of heat treatment on the strength and fracture resistance of a laser powder bed fusion-processed 18Ni-300 maraging steel. Materials Science and Engineering: A 844, pages 143167.
Crossref
Crossref
Prveen Bidare, Amaia Jiménez, Hany Hassanin & Khamis Essa. (2021) Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review. Advances in Manufacturing 10:2, pages 175-204.
Crossref
Crossref
Chaolin Tan, Ji Zou, Di Wang, Wenyou Ma & Kesong Zhou. (2022) Duplex strengthening via SiC addition and in-situ precipitation in additively manufactured composite materials. Composites Part B: Engineering 236, pages 109820.
Crossref
Crossref
Yuchao Bai, Cuiling Zhao, Jiayi Zhang & Hao Wang. (2022) Abnormal thermal expansion behaviour and phase transition of laser powder bed fusion maraging steel with different thermal histories during continuous heating. Additive Manufacturing 53, pages 102712.
Crossref
Crossref
Rangasayee Kannan & Peeyush Nandwana. (2022) Texture evolution during processing and post-processing of maraging steel fabricated by laser powder bed fusion. Scientific Reports 12:1.
Crossref
Crossref
M. V. Gerov, A. O. Kayasova, A. G. Kolmakov, D. V. Prosvirnin & V. F. Terent’ev. (2022) Mechanical Properties and Fracture of High-Strength Maraging Steel Fabricated by Selective Laser Melting. Russian Metallurgy (Metally) 2022:4, pages 309-315.
Crossref
Crossref
Di Wang, Jinhui Huang, Chaolin Tan, Wenyou Ma, Yongming Zou & Yongqiang Yang. (2022) Mechanical and corrosion properties of additively manufactured SiC-reinforced stainless steel. Materials Science and Engineering: A 841, pages 143018.
Crossref
Crossref
Amir Mostafaei, Cang Zhao, Yining He, Seyed Reza Ghiaasiaan, Bo Shi, Shuai Shao, Nima Shamsaei, Ziheng Wu, Nadia Kouraytem, Tao Sun, Joseph Pauza, Jerard V. Gordon, Bryan Webler, Niranjan D. Parab, Mohammadreza Asherloo, Qilin Guo, Lianyi Chen & Anthony D. Rollett. (2022) Defects and anomalies in powder bed fusion metal additive manufacturing. Current Opinion in Solid State and Materials Science 26:2, pages 100974.
Crossref
Crossref
Shoichi Tamura, Takashi Matsumura, Atsushi Ezura & Kazuo Mori. (2022) Anisotropic Cutting Force Characteristics in Milling of Maraging Steel Processed Through Selective Laser Melting. Journal of Manufacturing Science and Engineering 144:3.
Crossref
Crossref
Matjaž Godec, Francisco Ruiz-Zepeda, Bojan Podgornik, Črtomir Donik, Aleksandra Kocijan & Danijela A. Skobir Balantič. (2022) The influence of the plasma-nitriding temperature on the microstructure evolution and surface properties of additive-manufactured 18Ni300 maraging steel. Surface and Coatings Technology 433, pages 128089.
Crossref
Crossref
Mohammed Alsaddah, Ashfaq Khan, Kristian Groom & Kamran Mumtaz. (2022) Diode area melting of Ti6Al4V using 808 nm laser sources and variable multi-beam profiles. Materials & Design 215, pages 110518.
Crossref
Crossref
Kun Liu, Xiaoqing Jiang, Shujun Chen, Tao Yuan & Zhaoyang Yan. (2022) Effect of SiC addition on microstructure and properties of Al–Mg alloy fabricated by powder and wire cold metal transfer process. Journal of Materials Research and Technology 17, pages 310-319.
Crossref
Crossref
Shubhavardhan Ramadurga Narasimharaju, Wenhan Zeng, Tian Long See, Zicheng Zhu, Paul Scott, Xiangqian Jiang & Shan Lou. (2022) A comprehensive review on laser powder bed fusion of steels: Processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends. Journal of Manufacturing Processes 75, pages 375-414.
Crossref
Crossref
Amanda Rossi de Oliveira, Matic Jovičević-Klug, Vitor Furlan de Oliveira, Julio Carlos Teixeira & Erik Gustavo Del Conte. (2021) Barkhausen Noise monitoring of microstructure and surface residual stress in maraging steel manufactured by Powder Bed Fusion and aging. The International Journal of Advanced Manufacturing Technology 119:3-4, pages 1835-1852.
Crossref
Crossref
Cecilie V. Funch, Thomas L. Christiansen & Marcel A.J. Somers. (2022) Gaseous nitriding of additively manufactured maraging steel; nitriding kinetics and microstructure evolution. Surface and Coatings Technology 432, pages 128055.
Crossref
Crossref
David De Baere, Mandaná Moshiri, Lukasz Smolej & Jesper H. Hattel. (2022) Numerical investigation into laser-based powder bed fusion of cantilevers produced in 300-grade maraging steel. Additive Manufacturing 50, pages 102560.
Crossref
Crossref
Alper Kanyilmaz, Ali Gökhan Demir, Martina Chierici, Filippo Berto, Leroy Gardner, Sastry Yagnanna Kandukuri, Paul Kassabian, Takuya Kinoshita, Andrea Laurenti, Ingrid Paoletti, Anton du Plessis & Nima Razavi. (2022) Role of metal 3D printing to increase quality and resource-efficiency in the construction sector. Additive Manufacturing 50, pages 102541.
Crossref
Crossref
Jan Platl, Sabine Bodner, Christina Hofer, Andreas Landefeld, Harald Leitner, Christoph Turk, Marc-André Nielsen, Ali Gökhan Demir, Barbara Previtali, Jozef Keckes & Ronald Schnitzer. (2022) Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations. Acta Materialia 225, pages 117570.
Crossref
Crossref
Natalia Rońda, Krzysztof Grzelak, Marek Polański & Julita Dworecka-Wójcik. (2022) The Influence of Layer Thickness on the Microstructure and Mechanical Properties of M300 Maraging Steel Additively Manufactured by LENS® Technology. Materials 15:2, pages 603.
Crossref
Crossref
Daniel F.S. Ferreira, João S. Vieira, S.P. Rodrigues, G. Miranda, Filipe J. Oliveira & José M. Oliveira. (2022) Dry sliding wear and mechanical behaviour of selective laser melting processed 18Ni300 and H13 steels for moulds. Wear 488-489, pages 204179.
Crossref
Crossref
Guang Yang, Fangbin Deng, Siyu Zhou, Bin Wu, Lanyun Qin & Jianshen Zheng. (2022) Influence of shielding gas nitrogen content on the microstructure and mechanical properties of Cu-reinforced maraging steel fabricated by wire arc additive manufacturing. Materials Science and Engineering: A 832, pages 142463.
Crossref
Crossref
Rajesh Kumar Balaraman, Shaista Hussain, John Kgee Ong, Qing Yang Tan, U-Xuan Tan & Nagarajan Raghavan. (2022) Prediction of part density in additively manufactured maraging steel with supervised machine learning using pyrometer data. Materials Today: Proceedings 70, pages 368-375.
Crossref
Crossref
Zhenghang Ma, Qiang Zhai, Kunlun Wang, Guoxia Chen, Xiaotian Yin, Qingxia Zhang, Lingtao Meng, Shenghai Wang & Li Wang. (2022) Fabrication of Fe-based metallic glass reinforced FeCoNiCrMn high-entropy alloy through additive manufacturing: mechanical property enhancement and corrosion resistance improvement. Journal of Materials Research and Technology 16, pages 899-911.
Crossref
Crossref
A.T. Clare, R.S. Mishra, M. Merklein, H. Tan, I. Todd, L. Chechik, J. Li & M. Bambach. (2022) Alloy design and adaptation for additive manufacture. Journal of Materials Processing Technology 299, pages 117358.
Crossref
Crossref
Yuchao Bai, Cuiling Zhao, Di Wang & Hao Wang. (2022) Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting. Journal of Materials Processing Technology 299, pages 117328.
Crossref
Crossref
Hao Luo, Xiaoqiang Li, Cunliang Pan, Pengjiang He, Keli Zeng, Ke Hu, Huiyun Li & Chao Yang. (2021) Microstructure and oxidation resistance of CoNiCrAlY coating manufactured by laser powder bed fusion. Surface and Coatings Technology 427, pages 127846.
Crossref
Crossref
Yuan Tian, Robert Palad, Lu Jiang, Thomas Dorin, Kanwal Chadha & Clodualdo AranasJr.Jr.. (2021) The effect of heat treatments on mechanical properties of M789 steel fabricated by laser powder bed fusion. Journal of Alloys and Compounds 885, pages 161033.
Crossref
Crossref
Jyotsna Dutta Majumdar, Dileep Madapana & Indranil Manna. (2021) 3-D Printing by Laser-Assisted Direct Energy Deposition (LDED): The Present Status. Transactions of the Indian National Academy of Engineering 6:4, pages 933-953.
Crossref
Crossref
Fabio Belloli, Ali Gökhan Demir & Barbara Previtali. (2021) Understanding the deformation mechanisms of horizontal internal channels during the LPBF of 18Ni300 maraging steel. Journal of Manufacturing Processes 71, pages 237-248.
Crossref
Crossref
Chaolin Tan, Fei Weng, Shang Sui, Youxiang Chew & Guijun Bi. (2021) Progress and perspectives in laser additive manufacturing of key aeroengine materials. International Journal of Machine Tools and Manufacture 170, pages 103804.
Crossref
Crossref
Li Meng, Beibei Zhu, Qianwu Hu, Xiaoyan Zeng & Dengzhi Wang. (2021) Laser-induction hybrid cladding of different coatings on rail surface: Microstructure, wear properties and contact fatigue behaviors. Applied Surface Science 566, pages 150678.
Crossref
Crossref
Shahriar Afkhami, Edris Dabiri, Kalle Lipiäinen, Heidi Piili & Timo Björk. (2021) Effects of notch-load interactions on the mechanical performance of 3D printed tool steel 18Ni300. Additive Manufacturing 47, pages 102260.
Crossref
Crossref
Ki Chang Bae, Dohyung Kim, Yong Hwan Kim, Jeong-Jung Oak, Heesoo Lee, Wookjin Lee & Yong Ho Park. (2021) Effect of heat treatment, building direction, and sliding velocity on wear behavior of selectively laser-melted maraging 18Ni-300 steel against bearing steel. Wear 482-483, pages 203962.
Crossref
Crossref
Zhenhua Li, Baoren Teng, Bibo Yao & Jing Liu. (2021) Microstructure and mechanical properties of WC reinforced 18Ni300 composites produced by selective laser melting. Materials Characterization 180, pages 111406.
Crossref
Crossref
B. Podgornik, M. Šinko & M. Godec. (2021) Dependence of the wear resistance of additive-manufactured maraging steel on the build direction and heat treatment. Additive Manufacturing 46, pages 102123.
Crossref
Crossref
Yongdi Zhang, Guang Yang, Deming Wang & Haonan Wang. (2021) Design of SLM automatic leveling powder laying mechanism and variable position powder laying movement strategy. Journal of Computational Methods in Sciences and Engineering 21:4, pages 939-950.
Crossref
Crossref
Anand Kumar Subramaniyan, Sudarshan Reddy Anigani, Snehith Mathias, Akshay Pathania, Prasad Raghupatruni & Shubhendra S Yadav. (2021) Influence of post-heat treatment on microstructure, mechanical, and wear properties of maraging steel fabricated using direct metal laser sintering technique. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pages 146442072110373.
Crossref
Crossref
Guang Yang, Fangbin Deng, Siyu Zhou, Bin Wu & Lanyun Qin. (2021) Microstructure and mechanical properties of a novel Cu-reinforced maraging steel for wire arc additive manufacturing. Materials Science and Engineering: A 825, pages 141894.
Crossref
Crossref
Wee King Law, Kok-Cheong Wong, Haoliang Wang, Zhenzhong Sun & Chin Seong Lim. (2021) Microstructure Evolution in Additively Manufactured Steel Molds: A Review. Journal of Materials Engineering and Performance 30:9, pages 6389-6405.
Crossref
Crossref
D. Ahmadkhaniha, H. Möller & C. Zanella. (2021) Studying the Microstructural Effect of Selective Laser Melting and Electropolishing on the Performance of Maraging Steel. Journal of Materials Engineering and Performance 30:9, pages 6588-6605.
Crossref
Crossref
Amanda Rossi de Oliveira, Anibal de Andrade Mendes Filho, Mohammad Masoumi & Erik Gustavo Del Conte. (2021) Compression and energy absorption of maraging steel primitive scaffolds produced by powder bed fusion. The International Journal of Advanced Manufacturing Technology 116:3-4, pages 1271-1283.
Crossref
Crossref
Tiago Silva, Afonso Gregório, Filipe Silva, José Xavier, Ana Reis, Pedro Rosa & Abílio de Jesus. (2021) Numerical-Experimental Plastic-Damage Characterisation of Additively Manufactured 18Ni300 Maraging Steel by Means of Multiaxial Double-Notched Specimens. Journal of Manufacturing and Materials Processing 5:3, pages 84.
Crossref
Crossref
T Simson, J Koch, M Zetek & I Zetková. (2021) Corrosion Resistance of 18Ni-300 maraging steel manufactured by LPBF. IOP Conference Series: Materials Science and Engineering 1178:1, pages 012051.
Crossref
Crossref
M Koukolíková, V Brunát, G Wolf, T Simson & J Koch. (2021) Advanced techniques applied to analyse the influence of the heat treatment on the mechanical properties, microstructure and texture of additively produced components from maraging steel. IOP Conference Series: Materials Science and Engineering 1178:1, pages 012032.
Crossref
Crossref
Yanan Wang, Liangshun Luo, Tong Liu, Binbin Wang, Lei Luo, Junhao Zhao, Liang Wang, Yanqing Su, Jingjie Guo & Hengzhi Fu. (2021) Tuning process parameters to optimize microstructure and mechanical properties of novel maraging steel fabricated by selective laser melting. Materials Science and Engineering: A 823, pages 141740.
Crossref
Crossref
A. Vikhareva, G. Macêdo, L. Pelcastre & J. Hardell. (2021) High temperature tribological behaviour of additively manufactured tool material for applications in press hardening. Wear 477, pages 203859.
Crossref
Crossref
Yuchao Bai, Cuiling Zhao, Yu Zhang, Jie Chen & Hao Wang. (2021) Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability. Materials Science and Engineering: A 819, pages 141528.
Crossref
Crossref
Kichang Bae, Dohyung Kim, Wookjin Lee & Yongho Park. (2021) Wear Behavior of Conventionally and Directly Aged Maraging 18Ni-300 Steel Produced by Laser Powder Bed Fusion. Materials 14:10, pages 2588.
Crossref
Crossref
H Frank, M Ambos, S Lutze & M Scholz. (2021) Improvement of the properties of additively manufactured steel parts by combination of heat treatment and hard coatings. IOP Conference Series: Materials Science and Engineering 1147:1, pages 012001.
Crossref
Crossref
Chaolin Tan, Youxiang Chew, Guijun Bi, Di Wang, Wenyou Ma, Yongqiang Yang & Kesong Zhou. (2021) Additive manufacturing of steel–copper functionally graded material with ultrahigh bonding strength. Journal of Materials Science & Technology 72, pages 217-222.
Crossref
Crossref
Yongming Zou, Chaolin Tan, Zhaoguo Qiu, Wenyou Ma, Min Kuang & Dechang Zeng. (2021) Additively manufactured SiC-reinforced stainless steel with excellent strength and wear resistance. Additive Manufacturing 41, pages 101971.
Crossref
Crossref
SeyedAmirReza Shamsdini, Hadi Pirgazi, M.H. Ghoncheh, Mehdi Sanjari, Babak Shalchi Amirkhiz, Leo Kestens & Mohsen Mohammadi. (2021) A relationship between the build and texture orientation in tensile loading of the additively manufactured maraging steels. Additive Manufacturing 41, pages 101954.
Crossref
Crossref
Haokun Sun, Xin Chu, Zhiying Liu, Azimi Gisele & Yu Zou. (2021) Selective Laser Melting of Maraging Steels Using Recycled Powders: A Comprehensive Microstructural and Mechanical Investigation. Metallurgical and Materials Transactions A 52:5, pages 1714-1722.
Crossref
Crossref
Even W. Hovig, Amin S. Azar, Klas Solberg & Knut Sørby. (2021) An investigation of the anisotropic properties of heat-treated maraging steel grade 300 processed by laser powder bed fusion. The International Journal of Advanced Manufacturing Technology 114:5-6, pages 1359-1372.
Crossref
Crossref
M. Godec, B. Podgornik, A. Kocijan, Č. Donik & D. A. Skobir Balantič. (2021) Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser melting. Scientific Reports 11:1.
Crossref
Crossref
Amanda Rossi de Oliveira, Vitor Furlan de Oliveira, Julio Carlos Teixeira & Erik Gustavo Del Conte. (2021) Investigation of the build orientation effect on magnetic properties and Barkhausen Noise of additively manufactured maraging steel 300. Additive Manufacturing 38, pages 101827.
Crossref
Crossref
A. R. Oliveira, J. A. A. Diaz, A. D. C. Nizes, A. L. Jardini & E. G. Del Conte. (2021) Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel. Journal of Materials Engineering and Performance 30:2, pages 1479-1489.
Crossref
Crossref
Y. Hong, D.D. Dong, S.S. Lin, W. Wang, C.M. Tang, T.C. Kuang & M.J. Dai. (2021) Improving surface mechanical properties of the selective laser melted 18Ni300 maraging steel via plasma nitriding. Surface and Coatings Technology 406, pages 126675.
Crossref
Crossref
Chaolin Tan, Di Wang, Wenyou Ma & Kesong Zhou. (2021) Ultra-strong bond interface in additively manufactured iron-based multi-materials. Materials Science and Engineering: A 802, pages 140642.
Crossref
Crossref
Yuchao Bai, Cuiling Zhao, Yu Zhang & Hao Wang. (2021) Microstructure and mechanical properties of additively manufactured multi-material component with maraging steel on CrMn steel. Materials Science and Engineering: A 802, pages 140630.
Crossref
Crossref
G. M. Karthik & Hyoung Seop Kim. (2021) Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review. Metals and Materials International 27:1, pages 1-39.
Crossref
Crossref
Nima Haghdadi, Majid Laleh, Maxwell Moyle & Sophie Primig. (2020) Additive manufacturing of steels: a review of achievements and challenges. Journal of Materials Science 56:1, pages 64-107.
Crossref
Crossref
Jarosław Piekło & Aldona Garbacz-Klempka. (2020) Use of Maraging Steel 1.2709 for Implementing Parts of Pressure Mold Devices with Conformal Cooling System. Materials 13:23, pages 5533.
Crossref
Crossref
T. Allam, K.G. Pradeep, P. Köhnen, A. Marshal, J.H. Schleifenbaum & C. Haase. (2020) Tailoring the nanostructure of laser powder bed fusion additively manufactured maraging steel. Additive Manufacturing 36, pages 101561.
Crossref
Crossref
A. R. Oliveira, A. L. Jardini & E. G. Del Conte. (2020) Effects of cutting parameters on roughness and residual stress of maraging steel specimens produced by additive manufacturing. The International Journal of Advanced Manufacturing Technology 111:9-10, pages 2449-2459.
Crossref
Crossref
Ling-Chieh Shen, Xi-Huai Yang, Jeng-Rong Ho, Pi-Cheng Tung & Chih-Kuang Lin. (2020) Effects of Build Direction on the Mechanical Properties of a Martensitic Stainless Steel Fabricated by Selective Laser Melting. Materials 13:22, pages 5142.
Crossref
Crossref
Jaydeep Vishwakarma, K. Chattopadhyay & N.C. Santhi Srinivas. (2020) Effect of build orientation on microstructure and tensile behaviour of selectively laser melted M300 maraging steel. Materials Science and Engineering: A 798, pages 140130.
Crossref
Crossref
Chaolin Tan, Di Wang, Wenyou Ma, Yaorong Chen, Shijin Chen, Yongqiang Yang & Kesong Zhou. (2020) Design and additive manufacturing of novel conformal cooling molds. Materials & Design 196, pages 109147.
Crossref
Crossref
Chola Elangeswaran, Kopila Gurung, Raphael Koch, Antonio Cutolo & Brecht Van Hooreweder. (2020) Post‐treatment selection for tailored fatigue performance of 18Ni300 maraging steel manufactured by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures 43:10, pages 2359-2375.
Crossref
Crossref
Yi Yao, Kaiwen Wang, Xiaoqing Wang, Lin Li, Wenjun Cai, Samuel Kelly, Natalia Esparragoza, Matthew Rosser & Feng Yan. (2020) Microstructural heterogeneity and mechanical anisotropy of 18Ni-330 maraging steel fabricated by selective laser melting: The effect of build orientation and height. Journal of Materials Research 35:15, pages 2065-2076.
Crossref
Crossref
Chaolin Tan, Xinyue Zhang, Dongdong Dong, Bonnie Attard, Di Wang, Min Kuang, Wenyou Ma & Kesong Zhou. (2020) In-situ synthesised interlayer enhances bonding strength in additively manufactured multi-material hybrid tooling. International Journal of Machine Tools and Manufacture 155, pages 103592.
Crossref
Crossref
Dimitrios Chantzis, Xiaochuan Liu, Denis J. Politis, Omer El Fakir, Teun Yee Chua, Zhusheng Shi & Liliang Wang. (2020) Review on additive manufacturing of tooling for hot stamping. The International Journal of Advanced Manufacturing Technology 109:1-2, pages 87-107.
Crossref
Crossref
Virginia Osterman. 2020. Additive Manufacturing Processes. Additive Manufacturing Processes
324
330
.
Yongming Zou, Zhaoguo Qiu, Chaolin Tan, Yaosha Wu, Kefeng Li & Dechang Zeng. (2020) Microstructure and mechanical properties of Fe-based bulk metallic glass composites fabricated by selective laser melting. Journal of Non-Crystalline Solids 538, pages 120046.
Crossref
Crossref
T.S.N. Sankara Narayanan, Jisoo Kim, Hoon Eui Jeong & Hyung Wook Park. (2020) Enhancement of the surface properties of selective laser melted maraging steel by large pulsed electron-beam irradiation. Additive Manufacturing 33, pages 101125.
Crossref
Crossref
Satyam Suwas & Deepak Kumar. (2020) Microstructure–Texture–Mechanical Property Relationship in Alloys Produced by Additive Manufacturing Following Selective Laser Melting (SLM) Technique. Transactions of the Indian National Academy of Engineering 5:1, pages 1-10.
Crossref
Crossref
Zhengang Xiong, Panpan Zhang, Chaolin Tan, Dongdong Dong, Wenyou Ma & Kun Yu. (2020) Selective Laser Melting and Remelting of Pure Tungsten. Advanced Engineering Materials 22:3.
Crossref
Crossref
Troy Y. Ansell, Joshua P. Ricks, Chanman Park, Chris S. Tipper & Claudia C. Luhrs. (2020) Mechanical Properties of 3D-Printed Maraging Steel Induced by Environmental Exposure. Metals 10:2, pages 218.
Crossref
Crossref
P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe & E.A. Jägle. (2020) Steels in additive manufacturing: A review of their microstructure and properties. Materials Science and Engineering: A 772, pages 138633.
Crossref
Crossref
F.F. Conde, J.D. Escobar, J.P. Oliveira, A.L. Jardini, W.W. Bose Filho & J.A. Avila. (2019) Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel. Additive Manufacturing 29, pages 100804.
Crossref
Crossref
Joseph Agyapong, Aleksander Czekanski & Solomon Boakye–Yiadom. (2019) WITHDRAWN: Effect of heat treatment on microstructural evolution and properties of cemented carbides (WC-17Co) processed by selective laser sintering. Materials Science and Engineering: A, pages 138291.
Crossref
Crossref
Chaolin Tan, Sheng Li, Khamis Essa, Parastoo Jamshidi, Kesong Zhou, Wenyou Ma & Moataz M. Attallah. (2019) Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations. International Journal of Machine Tools and Manufacture 141, pages 19-29.
Crossref
Crossref
Shahriar Afkhami, Mohammad Dabiri, S. Habib Alavi, Timo Björk & Antti Salminen. (2019) Fatigue characteristics of steels manufactured by selective laser melting. International Journal of Fatigue 122, pages 72-83.
Crossref
Crossref
Chaolin Tan, Kesong Zhou & Tongchun Kuang. (2019) Selective laser melting of tungsten-copper functionally graded material. Materials Letters 237, pages 328-331.
Crossref
Crossref
Richard Fabian & Amir Hadadzadeh. (2022) Phase Transformation Kinetics in Laser-Powder Bed Fused Fe-Cr-Ni-Al Maraging Stainless Steel. SSRN Electronic Journal.
Crossref
Crossref
Dmitri Riabov, Karin Frisk, Mattias Thuvander, Eduard Hryha & Sven Bengtsson. (2022) Design and Characterization of a Cobalt-Free Stainless Maraging Steel for Laser-Based Powder Bed Fusion. SSRN Electronic Journal.
Crossref
Crossref