Citations (43)
Keep up to date with the latest research on this topic with citation updates for this article.
Articles from other publishers (43)
Ta-Te Chen, Ikumu Watanabe & Tatsuya Funazuka. (2021) Characterization of the Strain-Rate-Dependent Plasticity of Alloys Using Instrumented Indentation Tests. Crystals 11:11, pages 1316.
Crossref
Crossref
Jeena George, Sowjanya Mannepalli & Kiran S. R. N. Mangalampalli. (2021) Understanding Nanoscale Plasticity by Quantitative In Situ Conductive Nanoindentation. Advanced Engineering Materials 23:9, pages 2001494.
Crossref
Crossref
Sepehr Salari & Ali Beheshti. (2021) Asperity-based contact and static friction with provision for creep: A review. Surfaces and Interfaces 24, pages 101144.
Crossref
Crossref
Masao Sakane, Akihiko Hirano, Naomi Hamada, Yukari Hoya, Takahiro Oka, Masataka Furukawa & Takamoto Itoh. (2020) A new extraction method of creep exponents and coefficients from an indentation creep test by multiaxial stress analysis. Theoretical and Applied Fracture Mechanics 107, pages 102522.
Crossref
Crossref
A.A. Mamun, R.J. Moat, J. Kelleher & P.J. Bouchard. (2019) The effect of cyclic-loading generated intergranular strains on the creep deformation of a polycrystalline material. Materialia 7, pages 100385.
Crossref
Crossref
Masami Fujiwara, Hidenari Takagi & Kenji Higashida. (2019) High-Temperature Creep Mechanism of Dual-Ductile-Phase Magnesium Alloy with Long-Period Stacking Ordered Phase. MATERIALS TRANSACTIONS 60:4, pages 503-512.
Crossref
Crossref
Hsien-Chie Cheng, Ruei-You Hong & Wen-Hwa Chen. (2018) Assessment of Elastic–Plastic and Electrical Properties of Printed Silver-Based Interconnects for Flexible Electronics. Journal of Electronic Packaging 140:4.
Crossref
Crossref
H. C. Cheng, H. C. Hu, R. Y. Hong & W. H. Chen. (2017) Investigation of Stress-Strain Constitutive Behavior of Intermetallic Alloys. Journal of Mechanics 34:3, pages 349-361.
Crossref
Crossref
P. Sudharshan Phani, W. C. Oliver & G. M. Pharr. (2017) On the Measurement of Power Law Creep Parameters from Instrumented Indentation. JOM 69:11, pages 2229-2236.
Crossref
Crossref
Takahiko Kato, Carol A. Handwerker & Jasbir BathTadahiro Shibutani & Michael Osterman. 2016. Mitigating Tin Whisker Risks. Mitigating Tin Whisker Risks
225
248
.
Nicholas J. Martinez & Yu-Lin Shen. (2016) Analysis of Indentation-Derived Power-Law Creep Response. Journal of Materials Engineering and Performance 25:3, pages 1109-1116.
Crossref
Crossref
Felix Rickhey, Jin Haeng Lee & Hyungyil Lee. (2015) An efficient way of extracting creep properties from short-time spherical indentation tests. Journal of Materials Research 30:22, pages 3542-3552.
Crossref
Crossref
M. E. Cordova & Y.-L. Shen. (2014) Indentation versus uniaxial power-law creep: a numerical assessment. Journal of Materials Science 50:3, pages 1394-1400.
Crossref
Crossref
Katja Mader-Arndt, Zinaida Kutelova & Jürgen Tomas. 2015. Particle Adhesion and Removal. Particle Adhesion and Removal
105
155
.
Hidenari Takagi & Masami Fujiwara. (2014) Set of conversion coefficients for extracting uniaxial creep data from pseudo-steady indentation creep test results. Materials Science and Engineering: A 602, pages 98-104.
Crossref
Crossref
Hidenari Takagi, Ming Dao & Masami Fujiwara. (2014) Prediction of the Constitutive Equation for Uniaxial Creep of a Power-Law Material through Instrumented Microindentation Testing and Modeling. MATERIALS TRANSACTIONS 55:2, pages 275-284.
Crossref
Crossref
S. Prakrathi, M. Ravikumar, K. R. Udupa & K. Udaya Bhat. (2013) Fabrication of Hybrid Surface Composite through Friction Stir Processing and Its Impression Creep Behaviour. ISRN Materials Science 2013, pages 1-6.
Crossref
Crossref
Yuming Zhang, Honglai Zhu, Masami Fujiwara, Jinquan Xu & Ming Dao. (2013) Low-temperature creep of SnPb and SnAgCu solder alloys and reliability prediction in electronic packaging modules. Scripta Materialia 68:8, pages 607-610.
Crossref
Crossref
A. Sinha, S. Datta, P. C. Chakraborti & P. P. Chattopadhyay. (2012) Understanding the Shape-Memory Behavior in Ti-(~49 At. Pct) Ni Alloy by Nanoindentation Measurement. Metallurgical and Materials Transactions A 44:4, pages 1722-1729.
Crossref
Crossref
A. Sinha & P.P. Chattopadhyay. (2012) Nanomechanical response of martensite in Ti-(∼49at.%) Ni alloy. Materials Science and Engineering: A 552, pages 540-546.
Crossref
Crossref
Hidenari Takagi, Ming Dao & Masami Fujiwara. (2012) Prediction of the Constitutive Equation for Uniaxial Creep of a Power-Law Material through Microindentation Testing and Modeling. Journal of the Japan Institute of Metals and Materials 76:10, pages 597-606.
Crossref
Crossref
Hidenari Takagi, Ming Dao & M Fujiwara. (2010) Creep characterization of power-law materials through pseudo-steady indentation tests and numerical simulations. Journal of Physics: Conference Series 240, pages 012064.
Crossref
Crossref
Jonathan C. Trenkle, Corinne E. Packard & Christopher A. Schuh. (2010) Hot nanoindentation in inert environments. Review of Scientific Instruments 81:7.
Crossref
Crossref
Wuzhu Yan, Shifeng Wen, Jun Liu & Zhufeng Yue. (2010) Comparison between impression creep and uni-axial tensile creep performed on nickel-based single crystal superalloys. Materials Science and Engineering: A 527:7-8, pages 1850-1855.
Crossref
Crossref
C. Bernard, V. Keryvin, J.-C. Sangleboeuf & T. Rouxel. (2010) Indentation creep of window glass around glass transition. Mechanics of Materials 42:2, pages 196-206.
Crossref
Crossref
HIDENARI TAKAGI, MING DAO & MASAMI FUJIWARA. (2012) PSEUDO-STEADY INDENTATION CREEP. International Journal of Modern Physics B 24:01n02, pages 227-237.
Crossref
Crossref
Baoxing Xu, Akio Yonezu, Zhufeng Yue & Xi Chen. (2009) Indentation creep surface morphology of nickel-based single crystal superalloys. Computational Materials Science 46:2, pages 275-285.
Crossref
Crossref
Bipasha Bose & R.J. Klassen. (2009) Effect of copper addition and heat treatment on the depth dependence of the nanoindentation creep of aluminum at 300K. Materials Science and Engineering: A 500:1-2, pages 164-169.
Crossref
Crossref
Tadahiro Shibutani, Ji Wu, Qiang Yu & Michael Pecht. (2008) Key reliability concerns with lead-free connectors. Microelectronics Reliability 48:10, pages 1613-1627.
Crossref
Crossref
Hidenari Takagi, Ming Dao & Masami Fujiwara. (2008) Analysis on Pseudo-Steady Indentation Creep. Acta Mechanica Solida Sinica 21:4, pages 283-288.
Crossref
Crossref
Tadahiro Shibutani, Qiang Yu, Masaki Shiratori & Michael G. Pecht. (2008) Pressure-induced tin whisker formation. Microelectronics Reliability 48:7, pages 1033-1039.
Crossref
Crossref
Hiroyuki Hirakata, Toshihiro Hirako, Yoshimasa Takahashi, Yasunori Matsuoka & Takayuki Kitamura. (2008) Creep crack initiation at a free edge of an interface between submicron thick elements. Engineering Fracture Mechanics 75:10, pages 2907-2920.
Crossref
Crossref
Yanping Cao. (2007) Determination of the creep exponent of a power-law creep solid using indentation tests. Mechanics of Time-Dependent Materials 11:2, pages 159-172.
Crossref
Crossref
Tadahiro Shibutani, Qiang Yu & Masaki Shiratori. (2007) A Study of Deformation Mechanism During Nanoindentation Creep in Tin-Based Solder Balls. Journal of Electronic Packaging 129:1, pages 71-75.
Crossref
Crossref
Tadahiro Shibutani, Qiang Yu, Takuma Yamashita & Masaki Shiratori. (2006) Stress-Induced Tin Whisker Initiation Under Contact Loading. IEEE Transactions on Electronics Packaging Manufacturing 29:4, pages 259-264.
Crossref
Crossref
H. Takagi, M. Dao & M. Fujiwara. (2006) Experimental and computational study on the load-jump tests of Al–Mg solid–solution alloy using instrumented indentation technique. Materials Science and Engineering: A 423:1-2, pages 24-27.
Crossref
Crossref
Christopher A. Schuh. (2006) Nanoindentation studies of materials. Materials Today 9:5, pages 32-40.
Crossref
Crossref
Christopher A. Schuh, Corinne E. Packard & Alan C. Lund. (2006) Nanoindentation and contact-mode imaging at high temperatures. Journal of Materials Research 21:3, pages 725-736.
Crossref
Crossref
Hidenari Takagi, Ming Dao, Masami Fujiwara & Masahisa Otsuka. (2006) Creep Characterization of Aluminum-Magnesium Solid-Solution Alloy through Self-Similar Microindentation. MATERIALS TRANSACTIONS 47:8, pages 2006-2014.
Crossref
Crossref
Tadahiro Shibutani, Qiang Yu & Masaki Shiratori. (2005) Evaluation of Creep Properties in Soldering Ball by Nanoindentation Creep. Evaluation of Creep Properties in Soldering Ball by Nanoindentation Creep.
Hidenari Takagi, Ming Dao, Masami Fujiwara & Masahisa Otsuka. (2005) Detecting the Transition of Creep Rate-Controlling Process in Al-Mg Solid-Solution Alloy through Instrumented Indentation. Journal of the Japan Institute of Metals 69:4, pages 348-355.
Crossref
Crossref
Hidenari Takagi, Masami Fujiwara & Koji Kakehi. (2004) Measuring Young’s modulus of Ni-based superalloy single crystals at elevated temperatures through microindentation. Materials Science and Engineering: A 387-389, pages 348-351.
Crossref
Crossref
Ming Dao, Hidenari Takagi, Masami Fujiwara & Masahisa Otsuka. (2011) Computational and Experimental Characterization of Indentation Creep. MRS Proceedings 795.
Crossref
Crossref